From: Or Gerlitz <ogerlitz@mellanox.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, amirv@mellanox.com, ronye@mellanox.com,
Or Gerlitz <ogerlitz@mellanox.com>
Subject: [PATCH V1 net 2/2] net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode
Date: Thu, 9 May 2013 11:22:35 +0300 [thread overview]
Message-ID: <1368087755-3606-3-git-send-email-ogerlitz@mellanox.com> (raw)
In-Reply-To: <1368087755-3606-1-git-send-email-ogerlitz@mellanox.com>
From: Rony Efraim <ronye@mellanox.com>
Make sure that the following steps are taken:
- drop packets sent by the VF with vlan tag
- block packets with vlan tag which are steered to the VF
- drop/block tagged packets when the policy is priority-tagged
- make sure VLAN stripping for received packets is set
- make sure force UP bit for the VF QP is set
Use enum values for all the above instead of numerical bit offsets.
Signed-off-by: Rony Efraim <ronye@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_resources.c | 2 +-
.../net/ethernet/mellanox/mlx4/resource_tracker.c | 20 +++++++++++--
include/linux/mlx4/qp.h | 29 ++++++++++++++++++-
3 files changed, 45 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_resources.c b/drivers/net/ethernet/mellanox/mlx4/en_resources.c
index 91f2b2c..d3f5086 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_resources.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_resources.c
@@ -60,7 +60,7 @@ void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
context->pri_path.sched_queue = 0x83 | (priv->port - 1) << 6;
if (user_prio >= 0) {
context->pri_path.sched_queue |= user_prio << 3;
- context->pri_path.feup = 1 << 6;
+ context->pri_path.feup = MLX4_FEUP_FORCE_ETH_UP;
}
context->pri_path.counter_index = 0xff;
context->cqn_send = cpu_to_be32(cqn);
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index d4a9de6..1157f02 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -372,14 +372,28 @@ static int update_vport_qp_param(struct mlx4_dev *dev,
if (MLX4_QP_ST_RC == qp_type)
return -EINVAL;
+ /* force strip vlan by clear vsd */
+ qpc->param3 &= ~cpu_to_be32(MLX4_STRIP_VLAN);
+ if (0 != vp_oper->state.default_vlan) {
+ qpc->pri_path.vlan_control =
+ MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED |
+ MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED |
+ MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED;
+ } else { /* priority tagged */
+ qpc->pri_path.vlan_control =
+ MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED |
+ MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED;
+ }
+
+ qpc->pri_path.fvl_rx |= MLX4_FVL_RX_FORCE_ETH_VLAN;
qpc->pri_path.vlan_index = vp_oper->vlan_idx;
- qpc->pri_path.fl = (1 << 6) | (1 << 2); /* set cv bit and hide_cqe_vlan bit*/
- qpc->pri_path.feup |= 1 << 3; /* set fvl bit */
+ qpc->pri_path.fl |= MLX4_FL_CV | MLX4_FL_ETH_HIDE_CQE_VLAN;
+ qpc->pri_path.feup |= MLX4_FEUP_FORCE_ETH_UP | MLX4_FVL_FORCE_ETH_VLAN;
qpc->pri_path.sched_queue &= 0xC7;
qpc->pri_path.sched_queue |= (vp_oper->state.default_qos) << 3;
}
if (vp_oper->state.spoofchk) {
- qpc->pri_path.feup |= 1 << 5; /* set fsm bit */;
+ qpc->pri_path.feup |= MLX4_FSM_FORCE_ETH_SRC_MAC;
qpc->pri_path.grh_mylmc = (0x80 & qpc->pri_path.grh_mylmc) + vp_oper->mac_idx;
}
return 0;
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 67f46ad..352eec9 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -126,7 +126,7 @@ struct mlx4_rss_context {
struct mlx4_qp_path {
u8 fl;
- u8 reserved1[1];
+ u8 vlan_control;
u8 disable_pkey_check;
u8 pkey_index;
u8 counter_index;
@@ -141,11 +141,32 @@ struct mlx4_qp_path {
u8 sched_queue;
u8 vlan_index;
u8 feup;
- u8 reserved3;
+ u8 fvl_rx;
u8 reserved4[2];
u8 dmac[6];
};
+enum { /* fl */
+ MLX4_FL_CV = 1 << 6,
+ MLX4_FL_ETH_HIDE_CQE_VLAN = 1 << 2
+};
+enum { /* vlan_control */
+ MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED = 1 << 6,
+ MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED = 1 << 2,
+ MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED = 1 << 1, /* 802.1p priority tag */
+ MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED = 1 << 0
+};
+
+enum { /* feup */
+ MLX4_FEUP_FORCE_ETH_UP = 1 << 6, /* force Eth UP */
+ MLX4_FSM_FORCE_ETH_SRC_MAC = 1 << 5, /* force Source MAC */
+ MLX4_FVL_FORCE_ETH_VLAN = 1 << 3 /* force Eth vlan */
+};
+
+enum { /* fvl_rx */
+ MLX4_FVL_RX_FORCE_ETH_VLAN = 1 << 0 /* enforce Eth rx vlan */
+};
+
struct mlx4_qp_context {
__be32 flags;
__be32 pd;
@@ -185,6 +206,10 @@ struct mlx4_qp_context {
u32 reserved5[10];
};
+enum { /* param3 */
+ MLX4_STRIP_VLAN = 1 << 30
+};
+
/* Which firmware version adds support for NEC (NoErrorCompletion) bit */
#define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232)
--
1.7.1
next prev parent reply other threads:[~2013-05-09 8:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-09 8:22 [PATCH V1 net 0/2] net/mlx4: fixes for ndo VF control calls Or Gerlitz
2013-05-09 8:22 ` [PATCH V1 net 1/2] net/mlx4_core: Add missing report on VST and spoof-checking dev caps Or Gerlitz
2013-05-09 8:22 ` Or Gerlitz [this message]
2013-05-11 23:13 ` [PATCH V1 net 0/2] net/mlx4: fixes for ndo VF control calls David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368087755-3606-3-git-send-email-ogerlitz@mellanox.com \
--to=ogerlitz@mellanox.com \
--cc=amirv@mellanox.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=ronye@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).