From: Alan Ott <alan@signal11.us>
To: david@hauweele.net
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-zigbee-devel@lists.sourceforge.net,
Alan Ott <alan@signal11.us>
Subject: [PATCH beta 1] 3/3] mrf24j40: Use level-triggered interrupts
Date: Tue, 21 May 2013 22:01:20 -0400 [thread overview]
Message-ID: <1369188080-8904-4-git-send-email-alan@signal11.us> (raw)
In-Reply-To: <1369188080-8904-1-git-send-email-alan@signal11.us>
The mrf24j40 generates level interrupts. There are rare cases where it
appears that the interrupt line never gets de-asserted between interrupts,
causing interrupts to be lost, and causing a hung device from the driver's
perspective. Switching the driver to interpret these interrupts as
level-triggered fixes this issue.
Signed-off-by: Alan Ott <alan@signal11.us>
---
drivers/net/ieee802154/mrf24j40.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index a55ab8d..d59dbff 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -685,7 +685,7 @@ static int mrf24j40_probe(struct spi_device *spi)
ret = request_threaded_irq(spi->irq,
NULL,
mrf24j40_isr,
- IRQF_TRIGGER_FALLING|IRQF_ONESHOT,
+ IRQF_TRIGGER_LOW|IRQF_ONESHOT,
dev_name(&spi->dev),
devrec);
--
1.7.11.2
next prev parent reply other threads:[~2013-05-22 2:01 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-09 15:19 [PATCH 1/2] mrf24j40: Avoid transmission while receiving a frame David Hauweele
2013-05-09 15:19 ` [PATCH 2/2] mrf24j40: Keep the interrupt line enabled David Hauweele
[not found] ` <1368112788-25701-2-git-send-email-david-1EggE+PRa6vk1uMJSBkQmQ@public.gmane.org>
2013-05-14 3:55 ` Alan Ott
2013-05-16 21:34 ` [Linux-zigbee-devel] " David Hauweele
2013-05-19 23:04 ` Alan Ott
2013-05-21 16:17 ` David Hauweele
[not found] ` <CAO+c-UXymPjYysvh2kM36gcOsL3P51YWq+aYhEqX8oCySwBcaQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-05-21 18:22 ` Alan Ott
2013-05-14 3:22 ` [Linux-zigbee-devel] [PATCH 1/2] mrf24j40: Avoid transmission while receiving a frame Alan Ott
[not found] ` <5191ADE4.8040709-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>
2013-05-16 17:45 ` David Hauweele
[not found] ` <CAO+c-UVJQJbmmmCS4hxAEYHKa8gEU1Bs=y+Rv_A75UHeBZxc+w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-05-20 0:05 ` [PATCH testing] mrf24j40: Move INIT_COMPLETION to before the packet is sent Alan Ott
2013-05-22 2:01 ` [PATCH beta 1] 0/3] Fix race conditions in mrf24j40 interrupts Alan Ott
[not found] ` <1369188080-8904-1-git-send-email-alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>
2013-05-22 2:01 ` [PATCH beta 1] 1/3] mrf24j40: Move INIT_COMPLETION() to before packet transmission Alan Ott
2013-05-22 2:01 ` [PATCH beta 1] 2/3] mrf24j40: Use threaded IRQ handler Alan Ott
2013-10-06 3:52 ` [PATCH v1 0/3] Fix race conditions in mrf24j40 interrupts Alan Ott
[not found] ` <1381031544-2960-1-git-send-email-alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>
2013-10-06 3:52 ` [PATCH v1 1/3] mrf24j40: Move INIT_COMPLETION() to before packet transmission Alan Ott
2013-10-06 3:52 ` [PATCH v1 2/3] mrf24j40: Use threaded IRQ handler Alan Ott
2013-10-06 3:52 ` [PATCH v1 3/3] mrf24j40: Use level-triggered interrupts Alan Ott
2013-10-08 19:32 ` [PATCH v1 0/3] Fix race conditions in mrf24j40 interrupts David Miller
2013-05-22 2:01 ` Alan Ott [this message]
2013-05-22 2:03 ` [PATCH beta 1] " Alan Ott
2013-05-22 20:32 ` David Hauweele
[not found] ` <CAO+c-UV1bZZEE=9=7VVn3f1eLWzCpYCK9eZnnvzNwcPOKKtKLA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-05-23 6:36 ` Alan Ott
[not found] ` <519DB8E6.4020709-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>
2013-05-23 17:54 ` David Hauweele
2013-05-23 19:33 ` Alan Ott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369188080-8904-4-git-send-email-alan@signal11.us \
--to=alan@signal11.us \
--cc=david@hauweele.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-zigbee-devel@lists.sourceforge.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).