From: Ben Hutchings <bhutchings@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-net-drivers@solarflare.com>
Subject: [PATCH net-next 8/9] sfc: Fix IRQ cleanup in case of a probe failure
Date: Mon, 24 Jun 2013 21:15:04 +0100 [thread overview]
Message-ID: <1372104904.1896.37.camel@bwh-desktop.uk.level5networks.com> (raw)
In-Reply-To: <1372104708.1896.29.camel@bwh-desktop.uk.level5networks.com>
The lifetime of an irq_cpu_rmap is odd: we have to allocate it before
installing IRQ handlers and free it before removing the IRQ handlers.
As a result of this asymmetry, it was omitted from some failure paths.
On another failure path, we could try to remove IRQ handlers we
had not yet installed.
Move the irq_cpu_rmap allocation and freeing alongside IRQ handler
installation and removal, in efx_nic_{init,fini}_interrupts().
Count the number of IRQ handlers successfully installed and only
remove those on the failure path.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
drivers/net/ethernet/sfc/efx.c | 33 -------------------------------
drivers/net/ethernet/sfc/nic.c | 45 +++++++++++++++++++++++++++++++++++++-----
2 files changed, 40 insertions(+), 38 deletions(-)
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 787c9eb..e7284a2 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -21,7 +21,6 @@
#include <linux/ethtool.h>
#include <linux/topology.h>
#include <linux/gfp.h>
-#include <linux/cpu_rmap.h>
#include <linux/aer.h>
#include <linux/interrupt.h>
#include "net_driver.h"
@@ -1284,29 +1283,6 @@ static unsigned int efx_wanted_parallelism(struct efx_nic *efx)
return count;
}
-static int
-efx_init_rx_cpu_rmap(struct efx_nic *efx, struct msix_entry *xentries)
-{
-#ifdef CONFIG_RFS_ACCEL
- unsigned int i;
- int rc;
-
- efx->net_dev->rx_cpu_rmap = alloc_irq_cpu_rmap(efx->n_rx_channels);
- if (!efx->net_dev->rx_cpu_rmap)
- return -ENOMEM;
- for (i = 0; i < efx->n_rx_channels; i++) {
- rc = irq_cpu_rmap_add(efx->net_dev->rx_cpu_rmap,
- xentries[i].vector);
- if (rc) {
- free_irq_cpu_rmap(efx->net_dev->rx_cpu_rmap);
- efx->net_dev->rx_cpu_rmap = NULL;
- return rc;
- }
- }
-#endif
- return 0;
-}
-
/* Probe the number and type of interrupts we are able to obtain, and
* the resulting numbers of channels and RX queues.
*/
@@ -1360,11 +1336,6 @@ static int efx_probe_interrupts(struct efx_nic *efx)
efx->n_tx_channels = n_channels;
efx->n_rx_channels = n_channels;
}
- rc = efx_init_rx_cpu_rmap(efx, xentries);
- if (rc) {
- pci_disable_msix(efx->pci_dev);
- return rc;
- }
for (i = 0; i < efx->n_channels; i++)
efx_get_channel(efx, i)->irq =
xentries[i].vector;
@@ -2608,10 +2579,6 @@ static void efx_pci_remove_main(struct efx_nic *efx)
BUG_ON(efx->state == STATE_READY);
cancel_work_sync(&efx->reset_work);
-#ifdef CONFIG_RFS_ACCEL
- free_irq_cpu_rmap(efx->net_dev->rx_cpu_rmap);
- efx->net_dev->rx_cpu_rmap = NULL;
-#endif
efx_stop_interrupts(efx, false);
efx_nic_fini_interrupt(efx);
efx_fini_port(efx);
diff --git a/drivers/net/ethernet/sfc/nic.c b/drivers/net/ethernet/sfc/nic.c
index f2b864c..56ed3bc 100644
--- a/drivers/net/ethernet/sfc/nic.c
+++ b/drivers/net/ethernet/sfc/nic.c
@@ -14,6 +14,7 @@
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/seq_file.h>
+#include <linux/cpu_rmap.h>
#include "net_driver.h"
#include "bitfield.h"
#include "efx.h"
@@ -1706,6 +1707,7 @@ void efx_nic_push_rx_indir_table(struct efx_nic *efx)
int efx_nic_init_interrupt(struct efx_nic *efx)
{
struct efx_channel *channel;
+ unsigned int n_irqs;
int rc;
if (!EFX_INT_MODE_USE_MSI(efx)) {
@@ -1726,7 +1728,19 @@ int efx_nic_init_interrupt(struct efx_nic *efx)
return 0;
}
+#ifdef CONFIG_RFS_ACCEL
+ if (efx->interrupt_mode == EFX_INT_MODE_MSIX) {
+ efx->net_dev->rx_cpu_rmap =
+ alloc_irq_cpu_rmap(efx->n_rx_channels);
+ if (!efx->net_dev->rx_cpu_rmap) {
+ rc = -ENOMEM;
+ goto fail1;
+ }
+ }
+#endif
+
/* Hook MSI or MSI-X interrupt */
+ n_irqs = 0;
efx_for_each_channel(channel, efx) {
rc = request_irq(channel->irq, efx_msi_interrupt,
IRQF_PROBE_SHARED, /* Not shared */
@@ -1737,13 +1751,31 @@ int efx_nic_init_interrupt(struct efx_nic *efx)
"failed to hook IRQ %d\n", channel->irq);
goto fail2;
}
+ ++n_irqs;
+
+#ifdef CONFIG_RFS_ACCEL
+ if (efx->interrupt_mode == EFX_INT_MODE_MSIX &&
+ channel->channel < efx->n_rx_channels) {
+ rc = irq_cpu_rmap_add(efx->net_dev->rx_cpu_rmap,
+ channel->irq);
+ if (rc)
+ goto fail2;
+ }
+#endif
}
return 0;
fail2:
- efx_for_each_channel(channel, efx)
+#ifdef CONFIG_RFS_ACCEL
+ free_irq_cpu_rmap(efx->net_dev->rx_cpu_rmap);
+ efx->net_dev->rx_cpu_rmap = NULL;
+#endif
+ efx_for_each_channel(channel, efx) {
+ if (n_irqs-- == 0)
+ break;
free_irq(channel->irq, &efx->channel[channel->channel]);
+ }
fail1:
return rc;
}
@@ -1753,11 +1785,14 @@ void efx_nic_fini_interrupt(struct efx_nic *efx)
struct efx_channel *channel;
efx_oword_t reg;
+#ifdef CONFIG_RFS_ACCEL
+ free_irq_cpu_rmap(efx->net_dev->rx_cpu_rmap);
+ efx->net_dev->rx_cpu_rmap = NULL;
+#endif
+
/* Disable MSI/MSI-X interrupts */
- efx_for_each_channel(channel, efx) {
- if (channel->irq)
- free_irq(channel->irq, &efx->channel[channel->channel]);
- }
+ efx_for_each_channel(channel, efx)
+ free_irq(channel->irq, &efx->channel[channel->channel]);
/* ACK legacy interrupt */
if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0)
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
next prev parent reply other threads:[~2013-06-24 20:15 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-24 20:11 Pull request: sfc-next 2013-06-24 Ben Hutchings
2013-06-24 20:12 ` [PATCH net-next 1/9] sfc: Fix EEH with legacy interrupts Ben Hutchings
2013-06-24 20:13 ` [PATCH net-next 2/9] sfc: Enable RX checksum offload for packets not handled by GRO Ben Hutchings
2013-06-24 20:13 ` [PATCH net-next 3/9] sfc: Increase size of RX SKB header area Ben Hutchings
2013-07-16 17:33 ` Eric Dumazet
2013-07-16 17:53 ` Ben Hutchings
2013-07-16 20:22 ` Eric Dumazet
2013-07-16 20:57 ` Ben Hutchings
2013-06-24 20:13 ` [PATCH net-next 4/9] sfc: Report software timestamping capabilities Ben Hutchings
2013-06-24 20:14 ` [PATCH net-next 5/9] sfc: Enable accelerated RFS on vlans Ben Hutchings
2013-06-24 20:14 ` [PATCH net-next 6/9] sfc: Define and set RX buffer flag for packets parsed as TCP Ben Hutchings
2013-06-24 20:14 ` [PATCH net-next 7/9] sfc: Do not pass non-TCP packets into GRO code Ben Hutchings
2013-06-24 20:15 ` Ben Hutchings [this message]
2013-06-24 20:15 ` [PATCH net-next 9/9] sfc: Improve test for IOMMU in use Ben Hutchings
2013-06-25 23:12 ` Pull request: sfc-next 2013-06-24 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372104904.1896.37.camel@bwh-desktop.uk.level5networks.com \
--to=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=linux-net-drivers@solarflare.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).