From: Simon Horman <horms+renesas@verge.net.au>
To: netdev@vger.kernel.org, linux-sh@vger.kernel.org
Cc: Magnus Damm <magnus.damm@gmail.com>,
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH 2/2] sh_eth: Add support for r8a7790 SoC
Date: Mon, 22 Jul 2013 16:15:48 +0900 [thread overview]
Message-ID: <1374477348-1349-3-git-send-email-horms+renesas@verge.net.au> (raw)
In-Reply-To: <1374477348-1349-1-git-send-email-horms+renesas@verge.net.au>
This is a copy of support for r8a7778/9 with the .rmiimode mode bit
of struct sh_eth_cpu_data set.
Also update R8A7779 to R8A777x.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
v4
* s/R8A7779/R8A777x/ as requested by Sergei Shtylyov.
v3
* Add r8a7790_data rather than updating r8a777x_data.
As requested by Sergei Shtylyov.
v2
* Split from "sh_eth: add support RMIIMODE register"
---
drivers/net/ethernet/renesas/Kconfig | 2 +-
drivers/net/ethernet/renesas/sh_eth.c | 21 +++++++++++++++++++++
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig
index 19a8a04..a30c439 100644
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
@@ -13,4 +13,4 @@ config SH_ETH
Renesas SuperH Ethernet device driver.
This driver supporting CPUs are:
- SH7619, SH7710, SH7712, SH7724, SH7734, SH7763, SH7757,
- R8A7740 and R8A7779.
+ R8A7740, R8A777x and R8A7790.
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 87af49f..fedc0a0 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -393,6 +393,26 @@ static struct sh_eth_cpu_data r8a777x_data = {
.hw_swap = 1,
};
+/* R8A7790 */
+static struct sh_eth_cpu_data r8a7790_data = {
+ .set_duplex = sh_eth_set_duplex,
+ .set_rate = sh_eth_set_rate_r8a777x,
+
+ .ecsr_value = ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD,
+ .ecsipr_value = ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | ECSIPR_ICDIP,
+ .eesipr_value = 0x01ff009f,
+
+ .tx_check = EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO,
+ .eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE |
+ EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI,
+
+ .apr = 1,
+ .mpr = 1,
+ .tpauser = 1,
+ .hw_swap = 1,
+ .rmiimode = 1,
+};
+
static void sh_eth_set_rate_sh7724(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
@@ -2753,6 +2773,7 @@ static struct platform_device_id sh_eth_id_table[] = {
{ "sh7763-gether", (kernel_ulong_t)&sh7763_data },
{ "r8a7740-gether", (kernel_ulong_t)&r8a7740_data },
{ "r8a777x-ether", (kernel_ulong_t)&r8a777x_data },
+ { "r8a7790-ether", (kernel_ulong_t)&r8a7790_data },
{ }
};
MODULE_DEVICE_TABLE(platform, sh_eth_id_table);
--
1.8.2.1
prev parent reply other threads:[~2013-07-22 7:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-22 7:15 [PATCH 0/2] sh_eth: Add support for r8a7790 SoC Simon Horman
2013-07-22 7:15 ` [PATCH 1/2] sh_eth: add support for RMIIMODE register Simon Horman
2013-07-22 7:15 ` Simon Horman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374477348-1349-3-git-send-email-horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=sergei.shtylyov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).