netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: davem@davemloft.net, mst@redhat.com, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Jason Wang <jasowang@redhat.com>, Basil Gor <basil.gor@gmail.com>
Subject: [PATCH net-next] tuntap: hardware vlan tx support
Date: Tue, 23 Jul 2013 15:15:48 +0800	[thread overview]
Message-ID: <1374563748-38821-1-git-send-email-jasowang@redhat.com> (raw)

Inspired by commit f09e2249c4f5c7c13261ec73f5a7807076af0c8e (macvtap: restore
vlan header on user read). This patch adds hardware vlan tx support for
tuntap. This is done by copying vlan header directly into userspace in
tun_put_user() instead of doing it through __vlan_put_tag() in
dev_hard_start_xmit(). This eliminates one unnecessary memove in
vlan_insert_tag() for 802.1ad and 802.1q traffic.

pktgen test shows about 20% improvement for 802.1q traffic:

Before:
  662149pps 317Mb/sec (317831520bps) errors: 0
After:
  801033pps 384Mb/sec (384495840bps) errors: 0

Cc: Basil Gor <basil.gor@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/net/tun.c |   39 +++++++++++++++++++++++++++++++++++----
 1 files changed, 35 insertions(+), 4 deletions(-)

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index a72d141..66e265d 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -60,6 +60,7 @@
 #include <linux/if_arp.h>
 #include <linux/if_ether.h>
 #include <linux/if_tun.h>
+#include <linux/if_vlan.h>
 #include <linux/crc32.h>
 #include <linux/nsproxy.h>
 #include <linux/virtio_net.h>
@@ -1265,6 +1266,7 @@ static ssize_t tun_put_user(struct tun_struct *tun,
 {
 	struct tun_pi pi = { 0, skb->protocol };
 	ssize_t total = 0;
+	int vlan_offset = 0;
 
 	if (!(tun->flags & TUN_NO_PI)) {
 		if ((len -= sizeof(pi)) < 0)
@@ -1328,11 +1330,39 @@ static ssize_t tun_put_user(struct tun_struct *tun,
 		total += tun->vnet_hdr_sz;
 	}
 
-	len = min_t(int, skb->len, len);
+	if (!vlan_tx_tag_present(skb))
+		len = min_t(int, skb->len, len);
+	else {
+		int copy, ret;
+		struct {
+			__be16 h_vlan_proto;
+			__be16 h_vlan_TCI;
+		} veth;
+		veth.h_vlan_proto = skb->vlan_proto;
+		veth.h_vlan_TCI = htons(vlan_tx_tag_get(skb));
+
+		vlan_offset = offsetof(struct vlan_ethhdr, h_vlan_proto);
+		len = min_t(int, skb->len + VLAN_HLEN, len);
+
+		copy = min_t(int, vlan_offset, len);
+		ret = skb_copy_datagram_const_iovec(skb, 0, iv, total, copy);
+		len -= copy;
+		total += copy;
+		if (ret || !len)
+			goto done;
+
+		copy = min_t(int, sizeof(veth), len);
+		ret = memcpy_toiovecend(iv, (void *)&veth, total, copy);
+		len -= copy;
+		total += copy;
+		if (ret || !len)
+			goto done;
+	}
 
-	skb_copy_datagram_const_iovec(skb, 0, iv, total, len);
-	total += skb->len;
+	skb_copy_datagram_const_iovec(skb, vlan_offset, iv, total, len);
+	total += len;
 
+done:
 	tun->dev->stats.tx_packets++;
 	tun->dev->stats.tx_bytes += len;
 
@@ -1691,7 +1721,8 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 		tun_flow_init(tun);
 
 		dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST |
-			TUN_USER_FEATURES;
+				   TUN_USER_FEATURES | NETIF_F_HW_VLAN_CTAG_TX |
+				   NETIF_F_HW_VLAN_STAG_TX;
 		dev->features = dev->hw_features;
 		dev->vlan_features = dev->features;
 
-- 
1.7.1

             reply	other threads:[~2013-07-23  7:15 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-23  7:15 Jason Wang [this message]
2013-07-23 12:12 ` [PATCH net-next] tuntap: hardware vlan tx support Sergei Shtylyov
2013-07-24  3:19   ` Jason Wang
2013-07-23 15:17 ` Stephen Hemminger
2013-07-23 15:27   ` Michael S. Tsirkin
2013-07-24  4:41   ` Jason Wang
2013-07-23 15:53 ` Stephen Hemminger
2013-07-24  5:55   ` Jason Wang
2013-07-24 15:11     ` Stephen Hemminger
2013-07-25  3:31       ` Jason Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1374563748-38821-1-git-send-email-jasowang@redhat.com \
    --to=jasowang@redhat.com \
    --cc=basil.gor@gmail.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).