From: Neil Horman <nhorman@tuxdriver.com>
To: netdev@vger.kernel.org
Cc: Neil Horman <nhorman@tuxdriver.com>,
"David S. Miller" <davem@davemloft.net>,
Francois Romieu <romieu@fr.zoreil.com>
Subject: [net PATCH v3] 8139cp: Add dma_mapping_error checking
Date: Mon, 29 Jul 2013 13:05:35 -0400 [thread overview]
Message-ID: <1375117535-12906-1-git-send-email-nhorman@tuxdriver.com> (raw)
In-Reply-To: <1374516882-19131-1-git-send-email-nhorman@tuxdriver.com>
Self explanitory dma_mapping_error addition to the 8139 driver, based on this:
https://bugzilla.redhat.com/show_bug.cgi?id=947250
It showed several backtraces arising for dma_map_* usage without checking the
return code on the mapping. Add the check and abort the rx/tx operation if its
failed. Untested as I have no hardware and the reporter has wandered off, but
seems pretty straightforward.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Francois Romieu <romieu@fr.zoreil.com>
---
Change notes:
v2) Added stats update for tx_dropped as per Francois Romieu
v3)
* Updated rx patch to handle dma errors properly. Francois had pointed out that
I needed to increment the rx_dropped stat there, but the problem was a bit
deeper. I actually had to move the dma_mapping and error check higher in the
path, so that, in the event of a failure, we could drop the received skb, and
reuse its existing mapping in the rx ring. this is in line with what happens if
the skb allocation fails
* Updated the tx path to have a common goto for mapping failures, so we only
have one location to drop the skb
* Moved the unwind code into a separate helper function, as per Francois
suggestion. I though it would be alot of parameter passing and not very
adventageous, but on second look I think its more readable.
---
drivers/net/ethernet/realtek/8139cp.c | 48 ++++++++++++++++++++++++++++++++---
1 file changed, 45 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 0352345..3042030 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -478,7 +478,7 @@ rx_status_loop:
while (1) {
u32 status, len;
- dma_addr_t mapping;
+ dma_addr_t mapping, new_mapping;
struct sk_buff *skb, *new_skb;
struct cp_desc *desc;
const unsigned buflen = cp->rx_buf_sz;
@@ -520,6 +520,13 @@ rx_status_loop:
goto rx_next;
}
+ new_mapping = dma_map_single(&cp->pdev->dev, new_skb->data, buflen,
+ PCI_DMA_FROMDEVICE);
+ if (dma_mapping_error(&cp->pdev->dev, new_mapping)) {
+ dev->stats.rx_dropped++;
+ goto rx_next;
+ }
+
dma_unmap_single(&cp->pdev->dev, mapping,
buflen, PCI_DMA_FROMDEVICE);
@@ -531,12 +538,11 @@ rx_status_loop:
skb_put(skb, len);
- mapping = dma_map_single(&cp->pdev->dev, new_skb->data, buflen,
- PCI_DMA_FROMDEVICE);
cp->rx_skb[rx_tail] = new_skb;
cp_rx_skb(cp, skb, desc);
rx++;
+ mapping = new_mapping;
rx_next:
cp->rx_ring[rx_tail].opts2 = 0;
@@ -716,6 +722,22 @@ static inline u32 cp_tx_vlan_tag(struct sk_buff *skb)
TxVlanTag | swab16(vlan_tx_tag_get(skb)) : 0x00;
}
+static void unwind_rx_frag_mapping(struct cp_private *cp, struct sk_buff *skb,
+ int first, int entry_last)
+{
+ int frag, index;
+ struct cp_desc *txd;
+ skb_frag_t *this_frag;
+ for (frag = 0; frag+first < entry_last; frag++) {
+ index = first+frag;
+ cp->tx_skb[index] = NULL;
+ txd = &cp->tx_ring[index];
+ this_frag = &skb_shinfo(skb)->frags[frag];
+ dma_unmap_single(&cp->pdev->dev, le64_to_cpu(txd->addr),
+ skb_frag_size(this_frag), PCI_DMA_TODEVICE);
+ }
+}
+
static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
struct net_device *dev)
{
@@ -749,6 +771,9 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
len = skb->len;
mapping = dma_map_single(&cp->pdev->dev, skb->data, len, PCI_DMA_TODEVICE);
+ if (dma_mapping_error(&cp->pdev->dev, mapping))
+ goto out_dma_error;
+
txd->opts2 = opts2;
txd->addr = cpu_to_le64(mapping);
wmb();
@@ -786,6 +811,9 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
first_len = skb_headlen(skb);
first_mapping = dma_map_single(&cp->pdev->dev, skb->data,
first_len, PCI_DMA_TODEVICE);
+ if (dma_mapping_error(&cp->pdev->dev, first_mapping))
+ goto out_dma_error;
+
cp->tx_skb[entry] = skb;
entry = NEXT_TX(entry);
@@ -799,6 +827,11 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
mapping = dma_map_single(&cp->pdev->dev,
skb_frag_address(this_frag),
len, PCI_DMA_TODEVICE);
+ if (dma_mapping_error(&cp->pdev->dev, mapping)) {
+ unwind_rx_frag_mapping(cp, skb, first_entry, entry);
+ goto out_dma_error;
+ }
+
eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
ctrl = eor | len | DescOwn;
@@ -859,11 +892,16 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
netif_stop_queue(dev);
+out_unlock:
spin_unlock_irqrestore(&cp->lock, intr_flags);
cpw8(TxPoll, NormalTxPoll);
return NETDEV_TX_OK;
+out_dma_error:
+ kfree_skb(skb);
+ cp->dev->stats.tx_dropped++;
+ goto out_unlock;
}
/* Set or clear the multicast filter for this adaptor.
@@ -1054,6 +1092,10 @@ static int cp_refill_rx(struct cp_private *cp)
mapping = dma_map_single(&cp->pdev->dev, skb->data,
cp->rx_buf_sz, PCI_DMA_FROMDEVICE);
+ if (dma_mapping_error(&cp->pdev->dev, mapping)) {
+ kfree_skb(skb);
+ goto err_out;
+ }
cp->rx_skb[i] = skb;
cp->rx_ring[i].opts2 = 0;
--
1.8.1.4
next prev parent reply other threads:[~2013-07-29 17:05 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-22 18:14 [net PATCH] 8139cp: Add dma_mapping_error checking Neil Horman
2013-07-22 21:48 ` Francois Romieu
2013-07-23 13:00 ` Neil Horman
2013-07-26 14:28 ` [net PATCH v2] " Neil Horman
2013-07-26 20:06 ` Francois Romieu
2013-07-26 20:42 ` Neil Horman
2013-07-26 21:24 ` Francois Romieu
2013-07-28 10:40 ` Neil Horman
2013-07-28 21:34 ` Francois Romieu
2013-07-28 23:34 ` Neil Horman
2013-07-29 17:05 ` Neil Horman [this message]
2013-07-31 1:01 ` [net PATCH v3] " David Miller
2013-07-31 13:03 ` [net PATCH v4] " Neil Horman
2013-08-01 0:02 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375117535-12906-1-git-send-email-nhorman@tuxdriver.com \
--to=nhorman@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).