From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Subject: [PATCHv4 0/5] Add DT support for fixed PHYs Date: Fri, 16 May 2014 16:14:02 +0200 Message-ID: <1400249647-4643-1-git-send-email-thomas.petazzoni@free-electrons.com> Cc: Florian Fainelli , Tawfik Bayouk , Nadav Haklai , Lior Amsalem , Gregory Clement , Ezequiel Garcia , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Grant Likely , Rob Herring , Mark Rutland , Sascha Hauer , Christian Gmeiner , Thomas Petazzoni To: "David S. Miller" , netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: netdev.vger.kernel.org Subject: Add DT support for fixed PHYs Hello, Here is a fourth version of the patch set that adds a Device Tree binding and the related code to support fixed PHYs. I'm hoping to get this merged in 3.16. Changes since v3: * Rebased on top of v3.15-rc5 * In patch "net: phy: decouple PHY id and PHY address in fixed PHY driver", changed the PHY ID of fixed PHYs from 0xdeadbeef to 0x0, as suggested by Grant Likely. * Fixed the !CONFIG_PHY_FIXED case in patch "net: phy: extend fixed driver with fixed_phy_register()". Noticed by Florian Fainelli. * Added Acked-by from Grant Likely and Florian Fainelli on patch "net: phy: extend fixed driver with fixed_phy_register()". * Reworked the new fixed-link DT binding to be just a sub-node of the Ethernet MAC node, and not a node referenced by the 'phy' property. This was requested by Grant Likely. * Reworked the code implementing the new DT binding to also make it accept the old, single property based, DT binding. * Added a patch that actually uses the new fixed link DT binding for the Armada XP Matrix board. Changes since v2: * Rebased on top of v3.14-rc1, and re-tested on hardware. * Removed the RFC tag, since there seems to be some real interest in this feature, and the code has gone through several iterations already. * The error handling in fixed_phy_register() has been fixed. Changes since v1: * Instead of using a 'fixed-link' property inside the Ethernet device DT node, with a fairly cryptic succession of integer values, we now use a PHY subnode under the Ethernet device DT node, with explicit properties to configure the duplex, speed, pause and other PHY properties. * The PHY address is automatically allocated by the kernel and no longer visible in the Device Tree binding. * The PHY device is created directly when the network driver calls of_phy_connect_fixed_link(), and associated to the PHY DT node, which allows the existing of_phy_connect() function to work, without the need to use the deprecated of_phy_connect_fixed_link(). Posts of previous versions: RFCv1: http://www.spinics.net/lists/netdev/msg243253.html RFCv2: http://lists.infradead.org/pipermail/linux-arm-kernel/2013-September/196919.html PATCHv3: http://www.spinics.net/lists/netdev/msg273117.html Thanks, Thomas Thomas Petazzoni (5): net: phy: decouple PHY id and PHY address in fixed PHY driver net: phy: extend fixed driver with fixed_phy_register() of: provide a binding for fixed link PHYs net: mvneta: add support for fixed links ARM: mvebu: use the fixed-link PHY DT binding for the Armada XP Matrix board .../devicetree/bindings/net/fixed-link.txt | 31 +++++++++ arch/arm/boot/dts/armada-xp-matrix.dts | 4 ++ drivers/net/ethernet/marvell/mvneta.c | 19 ++++- drivers/net/phy/fixed.c | 81 +++++++++++++++++++--- drivers/of/of_mdio.c | 67 ++++++++++++++++++ include/linux/of_mdio.h | 15 ++++ include/linux/phy_fixed.h | 11 +++ 7 files changed, 215 insertions(+), 13 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/fixed-link.txt -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html