* [PATCH net-next 1/6] be2net: skip multicast promiscuos setting in already set
2014-05-28 6:30 [PATCH net-next 0/6] be2net: patch set Sathya Perla
@ 2014-05-28 6:31 ` Sathya Perla
2014-05-28 6:31 ` [PATCH net-next 2/6] be2net: fixup TX-rate setting code for Skyhawk-R Sathya Perla
` (5 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Sathya Perla @ 2014-05-28 6:31 UTC (permalink / raw)
To: netdev
From: Kalesh AP <kalesh.purayil@emulex.com>
Set mc-promisc (multicast promiscuous) mode on an interface, only if it is
*not already* in that mode.
Also removed logs that report interface being set to multicast
promiscous mode. In an earlier comment on the netdev list such log messages
were deemed unnecessary as this behaviour is common across most of the
ethernet drivers.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be.h | 1 +
drivers/net/ethernet/emulex/benet/be_main.c | 31 +++++++++++++++-----------
2 files changed, 19 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 31c3766..2e7c555 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -374,6 +374,7 @@ enum vf_state {
#define BE_FLAGS_LINK_STATUS_INIT 1
#define BE_FLAGS_WORKER_SCHEDULED (1 << 3)
#define BE_FLAGS_VLAN_PROMISC (1 << 4)
+#define BE_FLAGS_MCAST_PROMISC (1 << 5)
#define BE_FLAGS_NAPI_ENABLED (1 << 9)
#define BE_FLAGS_QNQ_ASYNC_EVT_RCVD (1 << 11)
#define BE_FLAGS_VXLAN_OFFLOADS (1 << 12)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index e1d445d..9116d5e 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1190,7 +1190,7 @@ ret:
static void be_clear_promisc(struct be_adapter *adapter)
{
adapter->promiscuous = false;
- adapter->flags &= ~BE_FLAGS_VLAN_PROMISC;
+ adapter->flags &= ~(BE_FLAGS_VLAN_PROMISC | BE_FLAGS_MCAST_PROMISC);
be_cmd_rx_filter(adapter, IFF_PROMISC, OFF);
}
@@ -1215,10 +1215,8 @@ static void be_set_rx_mode(struct net_device *netdev)
/* Enable multicast promisc if num configured exceeds what we support */
if (netdev->flags & IFF_ALLMULTI ||
- netdev_mc_count(netdev) > be_max_mc(adapter)) {
- be_cmd_rx_filter(adapter, IFF_ALLMULTI, ON);
- goto done;
- }
+ netdev_mc_count(netdev) > be_max_mc(adapter))
+ goto set_mcast_promisc;
if (netdev_uc_count(netdev) != adapter->uc_macs) {
struct netdev_hw_addr *ha;
@@ -1244,15 +1242,22 @@ static void be_set_rx_mode(struct net_device *netdev)
}
status = be_cmd_rx_filter(adapter, IFF_MULTICAST, ON);
-
- /* Set to MCAST promisc mode if setting MULTICAST address fails */
- if (status) {
- dev_info(&adapter->pdev->dev,
- "Exhausted multicast HW filters.\n");
- dev_info(&adapter->pdev->dev,
- "Disabling HW multicast filtering.\n");
- be_cmd_rx_filter(adapter, IFF_ALLMULTI, ON);
+ if (!status) {
+ if (adapter->flags & BE_FLAGS_MCAST_PROMISC)
+ adapter->flags &= ~BE_FLAGS_MCAST_PROMISC;
+ goto done;
}
+
+set_mcast_promisc:
+ if (adapter->flags & BE_FLAGS_MCAST_PROMISC)
+ return;
+
+ /* Set to MCAST promisc mode if setting MULTICAST address fails
+ * or if num configured exceeds what we support
+ */
+ status = be_cmd_rx_filter(adapter, IFF_ALLMULTI, ON);
+ if (!status)
+ adapter->flags |= BE_FLAGS_MCAST_PROMISC;
done:
return;
}
--
1.7.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH net-next 2/6] be2net: fixup TX-rate setting code for Skyhawk-R
2014-05-28 6:30 [PATCH net-next 0/6] be2net: patch set Sathya Perla
2014-05-28 6:31 ` [PATCH net-next 1/6] be2net: skip multicast promiscuos setting in already set Sathya Perla
@ 2014-05-28 6:31 ` Sathya Perla
2014-05-28 6:31 ` [PATCH net-next 3/6] be2net: support flashing new regions on Skyhawk-R Sathya Perla
` (4 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Sathya Perla @ 2014-05-28 6:31 UTC (permalink / raw)
To: netdev
From: Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com>
Skyhawk-R FW supports TX-rate setting only as a % value of the link
speed, set via the SET_PROFILE_CONFIG cmd.
This patch makes the necessary changes to the FW cmd descriptors to support
the above change and also introduces checks in be_set_vf_tx_rate() to allow
only discrete values (that map to % of the link-speed).
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 40 +++++++++++-----
drivers/net/ethernet/emulex/benet/be_cmds.h | 13 ++++--
drivers/net/ethernet/emulex/benet/be_main.c | 66 ++++++++++++++++++---------
3 files changed, 81 insertions(+), 38 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 476752d..216463b 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -3562,33 +3562,47 @@ void be_reset_nic_desc(struct be_nic_res_desc *nic)
nic->cq_count = 0xFFFF;
nic->toe_conn_count = 0xFFFF;
nic->eq_count = 0xFFFF;
+ nic->iface_count = 0xFFFF;
nic->link_param = 0xFF;
+ nic->channel_id_param = cpu_to_le16(0xF000);
nic->acpi_params = 0xFF;
nic->wol_param = 0x0F;
- nic->bw_min = 0xFFFFFFFF;
+ nic->tunnel_iface_count = 0xFFFF;
+ nic->direct_tenant_iface_count = 0xFFFF;
nic->bw_max = 0xFFFFFFFF;
}
-int be_cmd_config_qos(struct be_adapter *adapter, u32 bps, u8 domain)
+int be_cmd_config_qos(struct be_adapter *adapter, u32 max_rate, u16 link_speed,
+ u8 domain)
{
- if (lancer_chip(adapter)) {
- struct be_nic_res_desc nic_desc;
+ struct be_nic_res_desc nic_desc;
+ u32 bw_percent;
+ u16 version = 0;
+
+ if (BE3_chip(adapter))
+ return be_cmd_set_qos(adapter, max_rate / 10, domain);
- be_reset_nic_desc(&nic_desc);
+ be_reset_nic_desc(&nic_desc);
+ nic_desc.pf_num = adapter->pf_number;
+ nic_desc.vf_num = domain;
+ if (lancer_chip(adapter)) {
nic_desc.hdr.desc_type = NIC_RESOURCE_DESC_TYPE_V0;
nic_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V0;
nic_desc.flags = (1 << QUN_SHIFT) | (1 << IMM_SHIFT) |
(1 << NOSV_SHIFT);
- nic_desc.pf_num = adapter->pf_number;
- nic_desc.vf_num = domain;
- nic_desc.bw_max = cpu_to_le32(bps);
-
- return be_cmd_set_profile_config(adapter, &nic_desc,
- RESOURCE_DESC_SIZE_V0,
- 0, domain);
+ nic_desc.bw_max = cpu_to_le32(max_rate / 10);
} else {
- return be_cmd_set_qos(adapter, bps, domain);
+ version = 1;
+ nic_desc.hdr.desc_type = NIC_RESOURCE_DESC_TYPE_V1;
+ nic_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V1;
+ nic_desc.flags = (1 << IMM_SHIFT) | (1 << NOSV_SHIFT);
+ bw_percent = max_rate ? (max_rate * 100) / link_speed : 100;
+ nic_desc.bw_max = cpu_to_le32(bw_percent);
}
+
+ return be_cmd_set_profile_config(adapter, &nic_desc,
+ nic_desc.hdr.desc_len,
+ version, domain);
}
int be_cmd_manage_iface(struct be_adapter *adapter, u32 iface, u8 op)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 228d4b6..9df9d3b 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1891,16 +1891,20 @@ struct be_nic_res_desc {
u16 cq_count;
u16 toe_conn_count;
u16 eq_count;
- u32 rsvd5;
+ u16 vlan_id;
+ u16 iface_count;
u32 cap_flags;
u8 link_param;
- u8 rsvd6[3];
+ u8 rsvd6;
+ u16 channel_id_param;
u32 bw_min;
u32 bw_max;
u8 acpi_params;
u8 wol_param;
u16 rsvd7;
- u32 rsvd8[7];
+ u16 tunnel_iface_count;
+ u16 direct_tenant_iface_count;
+ u32 rsvd8[6];
} __packed;
/************ Multi-Channel type ***********/
@@ -2101,7 +2105,8 @@ int be_cmd_get_seeprom_data(struct be_adapter *adapter,
int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
u8 loopback_type, u8 enable);
int be_cmd_get_phy_info(struct be_adapter *adapter);
-int be_cmd_config_qos(struct be_adapter *adapter, u32 bps, u8 domain);
+int be_cmd_config_qos(struct be_adapter *adapter, u32 max_rate,
+ u16 link_speed, u8 domain);
void be_detect_error(struct be_adapter *adapter);
int be_cmd_get_die_temperature(struct be_adapter *adapter);
int be_cmd_get_cntl_attributes(struct be_adapter *adapter);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 9116d5e..d39a1c6 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1352,7 +1352,10 @@ static int be_set_vf_tx_rate(struct net_device *netdev, int vf,
int min_tx_rate, int max_tx_rate)
{
struct be_adapter *adapter = netdev_priv(netdev);
- int status = 0;
+ struct device *dev = &adapter->pdev->dev;
+ int percent_rate, status = 0;
+ u16 link_speed = 0;
+ u8 link_status;
if (!sriov_enabled(adapter))
return -EPERM;
@@ -1363,18 +1366,47 @@ static int be_set_vf_tx_rate(struct net_device *netdev, int vf,
if (min_tx_rate)
return -EINVAL;
- if (max_tx_rate < 100 || max_tx_rate > 10000) {
- dev_err(&adapter->pdev->dev,
- "max tx rate must be between 100 and 10000 Mbps\n");
- return -EINVAL;
+ if (!max_tx_rate)
+ goto config_qos;
+
+ status = be_cmd_link_status_query(adapter, &link_speed,
+ &link_status, 0);
+ if (status)
+ goto err;
+
+ if (!link_status) {
+ dev_err(dev, "TX-rate setting not allowed when link is down\n");
+ status = -EPERM;
+ goto err;
+ }
+
+ if (max_tx_rate < 100 || max_tx_rate > link_speed) {
+ dev_err(dev, "TX-rate must be between 100 and %d Mbps\n",
+ link_speed);
+ status = -EINVAL;
+ goto err;
}
- status = be_cmd_config_qos(adapter, max_tx_rate / 10, vf + 1);
+ /* On Skyhawk the QOS setting must be done only as a % value */
+ percent_rate = link_speed / 100;
+ if (skyhawk_chip(adapter) && (max_tx_rate % percent_rate)) {
+ dev_err(dev, "TX-rate must be a multiple of %d Mbps\n",
+ percent_rate);
+ status = -EINVAL;
+ goto err;
+ }
+
+config_qos:
+ status = be_cmd_config_qos(adapter, max_tx_rate, link_speed, vf + 1);
if (status)
- dev_err(&adapter->pdev->dev,
- "max tx rate %d on VF %d failed\n", max_tx_rate, vf);
- else
- adapter->vf_cfg[vf].tx_rate = max_tx_rate;
+ goto err;
+
+ adapter->vf_cfg[vf].tx_rate = max_tx_rate;
+ return 0;
+
+err:
+ dev_err(dev, "TX-rate setting of %dMbps on VF%d failed\n",
+ max_tx_rate, vf);
return status;
}
static int be_set_vf_link_state(struct net_device *netdev, int vf,
@@ -3135,7 +3167,6 @@ static int be_vf_setup(struct be_adapter *adapter)
struct be_vf_cfg *vf_cfg;
int status, old_vfs, vf;
u32 privileges;
- u16 lnk_speed;
old_vfs = pci_num_vf(adapter->pdev);
if (old_vfs) {
@@ -3191,16 +3222,9 @@ static int be_vf_setup(struct be_adapter *adapter)
vf);
}
- /* BE3 FW, by default, caps VF TX-rate to 100mbps.
- * Allow full available bandwidth
- */
- if (BE3_chip(adapter) && !old_vfs)
- be_cmd_config_qos(adapter, 1000, vf + 1);
-
- status = be_cmd_link_status_query(adapter, &lnk_speed,
- NULL, vf + 1);
- if (!status)
- vf_cfg->tx_rate = lnk_speed;
+ /* Allow full available bandwidth */
+ if (!old_vfs)
+ be_cmd_config_qos(adapter, 0, 0, vf + 1);
if (!old_vfs) {
be_cmd_enable_vf(adapter, vf + 1);
--
1.7.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH net-next 3/6] be2net: support flashing new regions on Skyhawk-R
2014-05-28 6:30 [PATCH net-next 0/6] be2net: patch set Sathya Perla
2014-05-28 6:31 ` [PATCH net-next 1/6] be2net: skip multicast promiscuos setting in already set Sathya Perla
2014-05-28 6:31 ` [PATCH net-next 2/6] be2net: fixup TX-rate setting code for Skyhawk-R Sathya Perla
@ 2014-05-28 6:31 ` Sathya Perla
2014-05-28 6:31 ` [PATCH net-next 4/6] be2net: re-factor MCCQ error status handling code Sathya Perla
` (3 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Sathya Perla @ 2014-05-28 6:31 UTC (permalink / raw)
To: netdev
From: Vasundhara Volam <vasundhara.volam@emulex.com>
Certain new flash regions have been added to Skyhawk-R FW image. The newer
FW images specify op_types for each region. A region is flashed only
when it's CRC doesn't match that of the region on the HW flash. While
upgrading to a new FW image the driver is expected to tolerate certain
errors.
This patch re-factors code under be_flash() to support the above scheme.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 25 ++-
drivers/net/ethernet/emulex/benet/be_cmds.h | 6 +-
drivers/net/ethernet/emulex/benet/be_hw.h | 12 +-
drivers/net/ethernet/emulex/benet/be_main.c | 252 +++++++++++++++++----------
4 files changed, 188 insertions(+), 107 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 216463b..f73185b 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -133,6 +133,9 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
CQE_STATUS_COMPL_MASK;
+ extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
+ CQE_STATUS_EXTD_MASK;
+
resp_hdr = be_decode_resp_hdr(compl->tag0, compl->tag1);
if (resp_hdr) {
@@ -172,16 +175,25 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
adapter->be_get_temp_freq = 0;
if (compl_status == MCC_STATUS_NOT_SUPPORTED ||
- compl_status == MCC_STATUS_ILLEGAL_REQUEST)
- goto done;
+ compl_status == MCC_STATUS_ILLEGAL_REQUEST)
+ return compl_status;
+
+ /* Ignore CRC mismatch error during FW download with old FW */
+ if (opcode == OPCODE_COMMON_WRITE_FLASHROM &&
+ compl_status == MCC_STATUS_FAILED &&
+ extd_status == MCC_ADDL_STS_FLASH_IMAGE_CRC_MISMATCH)
+ return compl_status;
+
+ /* Ignore illegal field error during FW download with old FW */
+ if (opcode == OPCODE_COMMON_WRITE_FLASHROM &&
+ compl_status == MCC_STATUS_ILLEGAL_FIELD)
+ return compl_status;
if (compl_status == MCC_STATUS_UNAUTHORIZED_REQUEST) {
dev_warn(&adapter->pdev->dev,
"VF is not privileged to issue opcode %d-%d\n",
opcode, subsystem);
} else {
- extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
- CQE_STATUS_EXTD_MASK;
dev_err(&adapter->pdev->dev,
"opcode %d-%d failed:status %d-%d\n",
opcode, subsystem, compl_status, extd_status);
@@ -190,7 +202,6 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
return extd_status;
}
}
-done:
return compl_status;
}
@@ -2300,7 +2311,7 @@ err_unlock:
}
int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc,
- int offset)
+ u16 optype, int offset)
{
struct be_mcc_wrb *wrb;
struct be_cmd_read_flash_crc *req;
@@ -2319,7 +2330,7 @@ int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc,
OPCODE_COMMON_READ_FLASHROM, sizeof(*req),
wrb, NULL);
- req->params.op_type = cpu_to_le32(OPTYPE_REDBOOT);
+ req->params.op_type = cpu_to_le32(optype);
req->params.op_code = cpu_to_le32(FLASHROM_OPER_REPORT);
req->params.offset = cpu_to_le32(offset);
req->params.data_buf_size = cpu_to_le32(0x4);
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 9df9d3b..070f775 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -61,6 +61,7 @@ enum {
};
#define MCC_ADDL_STS_INSUFFICIENT_RESOURCES 0x16
+#define MCC_ADDL_STS_FLASH_IMAGE_CRC_MISMATCH 0x4d
#define CQE_STATUS_COMPL_MASK 0xFFFF
#define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */
@@ -1186,7 +1187,8 @@ struct be_cmd_read_flash_crc {
struct flashrom_params params;
u8 crc[4];
u8 rsvd[4];
-};
+} __packed;
+
/**************** Lancer Firmware Flash ************/
struct amap_lancer_write_obj_context {
u8 write_length[24];
@@ -2088,7 +2090,7 @@ int lancer_cmd_read_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
u32 data_size, u32 data_offset, const char *obj_name,
u32 *data_read, u32 *eof, u8 *addn_status);
int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc,
- int offset);
+ u16 optype, int offset);
int be_cmd_enable_magic_wol(struct be_adapter *adapter, u8 *mac,
struct be_dma_mem *nonemb_cmd);
int be_cmd_fw_init(struct be_adapter *adapter);
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index 3bd1985..8840c64 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -188,10 +188,14 @@
#define OPTYPE_FCOE_FW_ACTIVE 10
#define OPTYPE_FCOE_FW_BACKUP 11
#define OPTYPE_NCSI_FW 13
+#define OPTYPE_REDBOOT_DIR 18
+#define OPTYPE_REDBOOT_CONFIG 19
+#define OPTYPE_SH_PHY_FW 21
+#define OPTYPE_FLASHISM_JUMPVECTOR 22
+#define OPTYPE_UFI_DIR 23
#define OPTYPE_PHY_FW 99
#define TN_8022 13
-#define ILLEGAL_IOCTL_REQ 2
#define FLASHROM_OPER_PHY_FLASH 9
#define FLASHROM_OPER_PHY_SAVE 10
#define FLASHROM_OPER_FLASH 1
@@ -250,6 +254,9 @@
#define IMAGE_FIRMWARE_BACKUP_FCoE 178
#define IMAGE_FIRMWARE_BACKUP_COMP_FCoE 179
#define IMAGE_FIRMWARE_PHY 192
+#define IMAGE_REDBOOT_DIR 208
+#define IMAGE_REDBOOT_CONFIG 209
+#define IMAGE_UFI_DIR 210
#define IMAGE_BOOT_CODE 224
/************* Rx Packet Type Encoding **************/
@@ -534,7 +541,8 @@ struct flash_section_entry {
u32 image_size;
u32 cksum;
u32 entry_point;
- u32 rsvd0;
+ u16 optype;
+ u16 rsvd0;
u32 rsvd1;
u8 ver_data[32];
} __packed;
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index d39a1c6..d2b4efa 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3630,34 +3630,7 @@ static void be_netpoll(struct net_device *netdev)
}
#endif
-#define FW_FILE_HDR_SIGN "ServerEngines Corp. "
-static char flash_cookie[2][16] = {"*** SE FLAS", "H DIRECTORY *** "};
-
-static bool be_flash_redboot(struct be_adapter *adapter,
- const u8 *p, u32 img_start, int image_size,
- int hdr_size)
-{
- u32 crc_offset;
- u8 flashed_crc[4];
- int status;
-
- crc_offset = hdr_size + img_start + image_size - 4;
-
- p += crc_offset;
-
- status = be_cmd_get_flash_crc(adapter, flashed_crc, (image_size - 4));
- if (status) {
- dev_err(&adapter->pdev->dev,
- "could not get crc from flash, not flashing redboot\n");
- return false;
- }
-
- /*update redboot only if crc does not match*/
- if (!memcmp(flashed_crc, p, 4))
- return false;
- else
- return true;
-}
+static char flash_cookie[2][16] = {"*** SE FLAS", "H DIRECTORY *** "};
static bool phy_flashing_required(struct be_adapter *adapter)
{
@@ -3704,12 +3677,35 @@ static struct flash_section_info *get_fsec_info(struct be_adapter *adapter,
return NULL;
}
+static int be_check_flash_crc(struct be_adapter *adapter, const u8 *p,
+ u32 img_offset, u32 img_size, int hdr_size,
+ u16 img_optype, bool *crc_match)
+{
+ u32 crc_offset;
+ int status;
+ u8 crc[4];
+
+ status = be_cmd_get_flash_crc(adapter, crc, img_optype, img_size - 4);
+ if (status)
+ return status;
+
+ crc_offset = hdr_size + img_offset + img_size - 4;
+
+ /* Skip flashing, if crc of flashed region matches */
+ if (!memcmp(crc, p + crc_offset, 4))
+ *crc_match = true;
+ else
+ *crc_match = false;
+
+ return status;
+}
+
static int be_flash(struct be_adapter *adapter, const u8 *img,
struct be_dma_mem *flash_cmd, int optype, int img_size)
{
- u32 total_bytes = 0, flash_op, num_bytes = 0;
- int status = 0;
struct be_cmd_write_flashrom *req = flash_cmd->va;
+ u32 total_bytes, flash_op, num_bytes;
+ int status;
total_bytes = img_size;
while (total_bytes) {
@@ -3733,14 +3729,11 @@ static int be_flash(struct be_adapter *adapter, const u8 *img,
img += num_bytes;
status = be_cmd_write_flashrom(adapter, flash_cmd, optype,
flash_op, num_bytes);
- if (status) {
- if (status == ILLEGAL_IOCTL_REQ &&
- optype == OPTYPE_PHY_FW)
- break;
- dev_err(&adapter->pdev->dev,
- "cmd to write to flash rom failed.\n");
+ if (status == MCC_STATUS_ILLEGAL_REQUEST &&
+ optype == OPTYPE_PHY_FW)
+ break;
+ else if (status)
return status;
- }
}
return 0;
}
@@ -3750,12 +3743,13 @@ static int be_flash_BEx(struct be_adapter *adapter,
const struct firmware *fw,
struct be_dma_mem *flash_cmd, int num_of_images)
{
- int status = 0, i, filehdr_size = 0;
int img_hdrs_size = (num_of_images * sizeof(struct image_hdr));
- const u8 *p = fw->data;
- const struct flash_comp *pflashcomp;
- int num_comp, redboot;
+ struct device *dev = &adapter->pdev->dev;
struct flash_section_info *fsec = NULL;
+ int status, i, filehdr_size, num_comp;
+ const struct flash_comp *pflashcomp;
+ bool crc_match;
+ const u8 *p;
struct flash_comp gen3_flash_types[] = {
{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, OPTYPE_ISCSI_ACTIVE,
@@ -3812,8 +3806,7 @@ static int be_flash_BEx(struct be_adapter *adapter,
/* Get flash section info*/
fsec = get_fsec_info(adapter, filehdr_size + img_hdrs_size, fw);
if (!fsec) {
- dev_err(&adapter->pdev->dev,
- "Invalid Cookie. UFI corrupted ?\n");
+ dev_err(dev, "Invalid Cookie. FW image may be corrupted\n");
return -1;
}
for (i = 0; i < num_comp; i++) {
@@ -3829,25 +3822,32 @@ static int be_flash_BEx(struct be_adapter *adapter,
continue;
if (pflashcomp[i].optype == OPTYPE_REDBOOT) {
- redboot = be_flash_redboot(adapter, fw->data,
- pflashcomp[i].offset,
- pflashcomp[i].size,
- filehdr_size +
- img_hdrs_size);
- if (!redboot)
+ status = be_check_flash_crc(adapter, fw->data,
+ pflashcomp[i].offset,
+ pflashcomp[i].size,
+ filehdr_size +
+ img_hdrs_size,
+ OPTYPE_REDBOOT, &crc_match);
+ if (status) {
+ dev_err(dev,
+ "Could not get CRC for 0x%x region\n",
+ pflashcomp[i].optype);
+ continue;
+ }
+
+ if (crc_match)
continue;
}
- p = fw->data;
- p += filehdr_size + pflashcomp[i].offset + img_hdrs_size;
+ p = fw->data + filehdr_size + pflashcomp[i].offset +
+ img_hdrs_size;
if (p + pflashcomp[i].size > fw->data + fw->size)
return -1;
status = be_flash(adapter, p, flash_cmd, pflashcomp[i].optype,
pflashcomp[i].size);
if (status) {
- dev_err(&adapter->pdev->dev,
- "Flashing section type %d failed.\n",
+ dev_err(dev, "Flashing section type 0x%x failed\n",
pflashcomp[i].img_type);
return status;
}
@@ -3855,74 +3855,134 @@ static int be_flash_BEx(struct be_adapter *adapter,
return 0;
}
+static u16 be_get_img_optype(struct flash_section_entry fsec_entry)
+{
+ u32 img_type = le32_to_cpu(fsec_entry.type);
+ u16 img_optype = le16_to_cpu(fsec_entry.optype);
+
+ if (img_optype != 0xFFFF)
+ return img_optype;
+
+ switch (img_type) {
+ case IMAGE_FIRMWARE_iSCSI:
+ img_optype = OPTYPE_ISCSI_ACTIVE;
+ break;
+ case IMAGE_BOOT_CODE:
+ img_optype = OPTYPE_REDBOOT;
+ break;
+ case IMAGE_OPTION_ROM_ISCSI:
+ img_optype = OPTYPE_BIOS;
+ break;
+ case IMAGE_OPTION_ROM_PXE:
+ img_optype = OPTYPE_PXE_BIOS;
+ break;
+ case IMAGE_OPTION_ROM_FCoE:
+ img_optype = OPTYPE_FCOE_BIOS;
+ break;
+ case IMAGE_FIRMWARE_BACKUP_iSCSI:
+ img_optype = OPTYPE_ISCSI_BACKUP;
+ break;
+ case IMAGE_NCSI:
+ img_optype = OPTYPE_NCSI_FW;
+ break;
+ case IMAGE_FLASHISM_JUMPVECTOR:
+ img_optype = OPTYPE_FLASHISM_JUMPVECTOR;
+ break;
+ case IMAGE_FIRMWARE_PHY:
+ img_optype = OPTYPE_SH_PHY_FW;
+ break;
+ case IMAGE_REDBOOT_DIR:
+ img_optype = OPTYPE_REDBOOT_DIR;
+ break;
+ case IMAGE_REDBOOT_CONFIG:
+ img_optype = OPTYPE_REDBOOT_CONFIG;
+ break;
+ case IMAGE_UFI_DIR:
+ img_optype = OPTYPE_UFI_DIR;
+ break;
+ default:
+ break;
+ }
+
+ return img_optype;
+}
+
static int be_flash_skyhawk(struct be_adapter *adapter,
const struct firmware *fw,
struct be_dma_mem *flash_cmd, int num_of_images)
{
- int status = 0, i, filehdr_size = 0;
- int img_offset, img_size, img_optype, redboot;
int img_hdrs_size = num_of_images * sizeof(struct image_hdr);
- const u8 *p = fw->data;
+ struct device *dev = &adapter->pdev->dev;
struct flash_section_info *fsec = NULL;
+ u32 img_offset, img_size, img_type;
+ int status, i, filehdr_size;
+ bool crc_match, old_fw_img;
+ u16 img_optype;
+ const u8 *p;
filehdr_size = sizeof(struct flash_file_hdr_g3);
fsec = get_fsec_info(adapter, filehdr_size + img_hdrs_size, fw);
if (!fsec) {
- dev_err(&adapter->pdev->dev,
- "Invalid Cookie. UFI corrupted ?\n");
+ dev_err(dev, "Invalid Cookie. FW image may be corrupted\n");
return -1;
}
for (i = 0; i < le32_to_cpu(fsec->fsec_hdr.num_images); i++) {
img_offset = le32_to_cpu(fsec->fsec_entry[i].offset);
img_size = le32_to_cpu(fsec->fsec_entry[i].pad_size);
+ img_type = le32_to_cpu(fsec->fsec_entry[i].type);
+ img_optype = be_get_img_optype(fsec->fsec_entry[i]);
+ old_fw_img = fsec->fsec_entry[i].optype == 0xFFFF;
- switch (le32_to_cpu(fsec->fsec_entry[i].type)) {
- case IMAGE_FIRMWARE_iSCSI:
- img_optype = OPTYPE_ISCSI_ACTIVE;
- break;
- case IMAGE_BOOT_CODE:
- img_optype = OPTYPE_REDBOOT;
- break;
- case IMAGE_OPTION_ROM_ISCSI:
- img_optype = OPTYPE_BIOS;
- break;
- case IMAGE_OPTION_ROM_PXE:
- img_optype = OPTYPE_PXE_BIOS;
- break;
- case IMAGE_OPTION_ROM_FCoE:
- img_optype = OPTYPE_FCOE_BIOS;
- break;
- case IMAGE_FIRMWARE_BACKUP_iSCSI:
- img_optype = OPTYPE_ISCSI_BACKUP;
- break;
- case IMAGE_NCSI:
- img_optype = OPTYPE_NCSI_FW;
- break;
- default:
+ if (img_optype == 0xFFFF)
continue;
+ /* Don't bother verifying CRC if an old FW image is being
+ * flashed
+ */
+ if (old_fw_img)
+ goto flash;
+
+ status = be_check_flash_crc(adapter, fw->data, img_offset,
+ img_size, filehdr_size +
+ img_hdrs_size, img_optype,
+ &crc_match);
+ /* The current FW image on the card does not recognize the new
+ * FLASH op_type. The FW download is partially complete.
+ * Reboot the server now to enable FW image to recognize the
+ * new FLASH op_type. To complete the remaining process,
+ * download the same FW again after the reboot.
+ */
+ if (status == MCC_STATUS_ILLEGAL_REQUEST ||
+ status == MCC_STATUS_ILLEGAL_FIELD) {
+ dev_err(dev, "Flash incomplete. Reset the server\n");
+ dev_err(dev, "Download FW image again after reset\n");
+ return -EAGAIN;
+ } else if (status) {
+ dev_err(dev, "Could not get CRC for 0x%x region\n",
+ img_optype);
+ return -EFAULT;
}
- if (img_optype == OPTYPE_REDBOOT) {
- redboot = be_flash_redboot(adapter, fw->data,
- img_offset, img_size,
- filehdr_size +
- img_hdrs_size);
- if (!redboot)
- continue;
- }
+ if (crc_match)
+ continue;
- p = fw->data;
- p += filehdr_size + img_offset + img_hdrs_size;
+flash:
+ p = fw->data + filehdr_size + img_offset + img_hdrs_size;
if (p + img_size > fw->data + fw->size)
return -1;
status = be_flash(adapter, p, flash_cmd, img_optype, img_size);
- if (status) {
- dev_err(&adapter->pdev->dev,
- "Flashing section type %d failed.\n",
- fsec->fsec_entry[i].type);
- return status;
+ /* For old FW images ignore ILLEGAL_FIELD error or errors on
+ * UFI_DIR region
+ */
+ if (old_fw_img && (status == MCC_STATUS_ILLEGAL_FIELD ||
+ (img_optype == OPTYPE_UFI_DIR &&
+ status == MCC_STATUS_FAILED))) {
+ continue;
+ } else if (status) {
+ dev_err(dev, "Flashing section type 0x%x failed\n",
+ img_type);
+ return -EFAULT;
}
}
return 0;
--
1.7.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH net-next 4/6] be2net: re-factor MCCQ error status handling code
2014-05-28 6:30 [PATCH net-next 0/6] be2net: patch set Sathya Perla
` (2 preceding siblings ...)
2014-05-28 6:31 ` [PATCH net-next 3/6] be2net: support flashing new regions on Skyhawk-R Sathya Perla
@ 2014-05-28 6:31 ` Sathya Perla
2014-05-28 6:31 ` [PATCH net-next 5/6] be2net: move async cmd processing to a separate routine Sathya Perla
` (2 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Sathya Perla @ 2014-05-28 6:31 UTC (permalink / raw)
To: netdev
From: Kalesh AP <kalesh.purayil@emulex.com>
This patch improves MCCQ error status handling in the following ways:
a) A MCC cmd completion returns a base-status and an addl-status.
So far, the routine be_mcc_compl_process() returned only the "status" value.
Now, embedd both statuses in the return value and let the caller routine access
the value of interest using base_status() and addl_status() macros.
b) Rename variables accordingly (base/addl) to avoid confusion while error
checking.
b) Some of the errors returned by FW are harmless and so an error msg is not
logged for such errors. Capture this logic in a separate routine to make the
code more readable.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 56 +++++++++++++--------------
drivers/net/ethernet/emulex/benet/be_cmds.h | 30 ++++++++++----
drivers/net/ethernet/emulex/benet/be_main.c | 16 ++++---
3 files changed, 57 insertions(+), 45 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index f73185b..a2ecdff 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -119,10 +119,24 @@ static struct be_cmd_resp_hdr *be_decode_resp_hdr(u32 tag0, u32 tag1)
return (void *)addr;
}
+static bool be_skip_err_log(u8 opcode, u16 base_status, u16 addl_status)
+{
+ if (base_status == MCC_STATUS_NOT_SUPPORTED ||
+ base_status == MCC_STATUS_ILLEGAL_REQUEST ||
+ addl_status == MCC_ADDL_STATUS_TOO_MANY_INTERFACES ||
+ (opcode == OPCODE_COMMON_WRITE_FLASHROM &&
+ (base_status == MCC_STATUS_ILLEGAL_FIELD ||
+ addl_status == MCC_ADDL_STATUS_FLASH_IMAGE_CRC_MISMATCH)))
+ return true;
+ else
+ return false;
+}
+
static int be_mcc_compl_process(struct be_adapter *adapter,
struct be_mcc_compl *compl)
{
- u16 compl_status, extd_status;
+ enum mcc_base_status base_status;
+ enum mcc_addl_status addl_status;
struct be_cmd_resp_hdr *resp_hdr;
u8 opcode = 0, subsystem = 0;
@@ -130,11 +144,8 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
* from mcc_wrb */
be_dws_le_to_cpu(compl, 4);
- compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
- CQE_STATUS_COMPL_MASK;
-
- extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
- CQE_STATUS_EXTD_MASK;
+ base_status = base_status(compl->status);
+ addl_status = addl_status(compl->status);
resp_hdr = be_decode_resp_hdr(compl->tag0, compl->tag1);
@@ -152,11 +163,11 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
if (((opcode == OPCODE_COMMON_WRITE_FLASHROM) ||
(opcode == OPCODE_COMMON_WRITE_OBJECT)) &&
(subsystem == CMD_SUBSYSTEM_COMMON)) {
- adapter->flash_status = compl_status;
+ adapter->flash_status = compl->status;
complete(&adapter->et_cmd_compl);
}
- if (compl_status == MCC_STATUS_SUCCESS) {
+ if (base_status == MCC_STATUS_SUCCESS) {
if (((opcode == OPCODE_ETH_GET_STATISTICS) ||
(opcode == OPCODE_ETH_GET_PPORT_STATS)) &&
(subsystem == CMD_SUBSYSTEM_ETH)) {
@@ -174,35 +185,20 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
if (opcode == OPCODE_COMMON_GET_CNTL_ADDITIONAL_ATTRIBUTES)
adapter->be_get_temp_freq = 0;
- if (compl_status == MCC_STATUS_NOT_SUPPORTED ||
- compl_status == MCC_STATUS_ILLEGAL_REQUEST)
- return compl_status;
+ if (be_skip_err_log(opcode, base_status, addl_status))
+ return compl->status;
- /* Ignore CRC mismatch error during FW download with old FW */
- if (opcode == OPCODE_COMMON_WRITE_FLASHROM &&
- compl_status == MCC_STATUS_FAILED &&
- extd_status == MCC_ADDL_STS_FLASH_IMAGE_CRC_MISMATCH)
- return compl_status;
-
- /* Ignore illegal field error during FW download with old FW */
- if (opcode == OPCODE_COMMON_WRITE_FLASHROM &&
- compl_status == MCC_STATUS_ILLEGAL_FIELD)
- return compl_status;
-
- if (compl_status == MCC_STATUS_UNAUTHORIZED_REQUEST) {
+ if (base_status == MCC_STATUS_UNAUTHORIZED_REQUEST) {
dev_warn(&adapter->pdev->dev,
"VF is not privileged to issue opcode %d-%d\n",
opcode, subsystem);
} else {
dev_err(&adapter->pdev->dev,
"opcode %d-%d failed:status %d-%d\n",
- opcode, subsystem, compl_status, extd_status);
-
- if (extd_status == MCC_ADDL_STS_INSUFFICIENT_RESOURCES)
- return extd_status;
+ opcode, subsystem, base_status, addl_status);
}
}
- return compl_status;
+ return compl->status;
}
/* Link state evt is a string of bytes; no need for endian swapping */
@@ -452,7 +448,9 @@ static int be_mcc_notify_wait(struct be_adapter *adapter)
if (status == -EIO)
goto out;
- status = resp->status;
+ status = (resp->base_status |
+ ((resp->addl_status & CQE_ADDL_STATUS_MASK) <<
+ CQE_ADDL_STATUS_SHIFT));
out:
return status;
}
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 070f775..af62403 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -50,7 +50,7 @@ struct be_mcc_wrb {
#define CQE_FLAGS_CONSUMED_MASK (1 << 27)
/* Completion Status */
-enum {
+enum mcc_base_status {
MCC_STATUS_SUCCESS = 0,
MCC_STATUS_FAILED = 1,
MCC_STATUS_ILLEGAL_REQUEST = 2,
@@ -60,13 +60,25 @@ enum {
MCC_STATUS_NOT_SUPPORTED = 66
};
-#define MCC_ADDL_STS_INSUFFICIENT_RESOURCES 0x16
-#define MCC_ADDL_STS_FLASH_IMAGE_CRC_MISMATCH 0x4d
+/* Additional status */
+enum mcc_addl_status {
+ MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES = 0x16,
+ MCC_ADDL_STATUS_FLASH_IMAGE_CRC_MISMATCH = 0x4d,
+ MCC_ADDL_STATUS_TOO_MANY_INTERFACES = 0x4a
+};
+
+#define CQE_BASE_STATUS_MASK 0xFFFF
+#define CQE_BASE_STATUS_SHIFT 0 /* bits 0 - 15 */
+#define CQE_ADDL_STATUS_MASK 0xFF
+#define CQE_ADDL_STATUS_SHIFT 16 /* bits 16 - 31 */
-#define CQE_STATUS_COMPL_MASK 0xFFFF
-#define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */
-#define CQE_STATUS_EXTD_MASK 0xFFFF
-#define CQE_STATUS_EXTD_SHIFT 16 /* bits 16 - 31 */
+#define base_status(status) \
+ ((enum mcc_base_status) \
+ (status > 0 ? (status & CQE_BASE_STATUS_MASK) : 0))
+#define addl_status(status) \
+ ((enum mcc_addl_status) \
+ (status > 0 ? (status >> CQE_ADDL_STATUS_SHIFT) & \
+ CQE_ADDL_STATUS_MASK : 0))
struct be_mcc_compl {
u32 status; /* dword 0 */
@@ -259,8 +271,8 @@ struct be_cmd_resp_hdr {
u8 opcode; /* dword 0 */
u8 subsystem; /* dword 0 */
u8 rsvd[2]; /* dword 0 */
- u8 status; /* dword 1 */
- u8 add_status; /* dword 1 */
+ u8 base_status; /* dword 1 */
+ u8 addl_status; /* dword 1 */
u8 rsvd1[2]; /* dword 1 */
u32 response_length; /* dword 2 */
u32 actual_resp_len; /* dword 3 */
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index d2b4efa..6822b3d 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1111,7 +1111,8 @@ static int be_vid_config(struct be_adapter *adapter)
status = be_cmd_vlan_config(adapter, adapter->if_handle, vids, num);
if (status) {
/* Set to VLAN promisc mode as setting VLAN filter failed */
- if (status == MCC_ADDL_STS_INSUFFICIENT_RESOURCES)
+ if (addl_status(status) ==
+ MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES)
goto set_vlan_promisc;
dev_err(&adapter->pdev->dev,
"Setting HW VLAN filtering failed.\n");
@@ -3729,7 +3730,7 @@ static int be_flash(struct be_adapter *adapter, const u8 *img,
img += num_bytes;
status = be_cmd_write_flashrom(adapter, flash_cmd, optype,
flash_op, num_bytes);
- if (status == MCC_STATUS_ILLEGAL_REQUEST &&
+ if (base_status(status) == MCC_STATUS_ILLEGAL_REQUEST &&
optype == OPTYPE_PHY_FW)
break;
else if (status)
@@ -3952,8 +3953,8 @@ static int be_flash_skyhawk(struct be_adapter *adapter,
* new FLASH op_type. To complete the remaining process,
* download the same FW again after the reboot.
*/
- if (status == MCC_STATUS_ILLEGAL_REQUEST ||
- status == MCC_STATUS_ILLEGAL_FIELD) {
+ if (base_status(status) == MCC_STATUS_ILLEGAL_REQUEST ||
+ base_status(status) == MCC_STATUS_ILLEGAL_FIELD) {
dev_err(dev, "Flash incomplete. Reset the server\n");
dev_err(dev, "Download FW image again after reset\n");
return -EAGAIN;
@@ -3975,9 +3976,10 @@ flash:
/* For old FW images ignore ILLEGAL_FIELD error or errors on
* UFI_DIR region
*/
- if (old_fw_img && (status == MCC_STATUS_ILLEGAL_FIELD ||
- (img_optype == OPTYPE_UFI_DIR &&
- status == MCC_STATUS_FAILED))) {
+ if (old_fw_img &&
+ (base_status(status) == MCC_STATUS_ILLEGAL_FIELD ||
+ (img_optype == OPTYPE_UFI_DIR &&
+ base_status(status) == MCC_STATUS_FAILED))) {
continue;
} else if (status) {
dev_err(dev, "Flashing section type 0x%x failed\n",
--
1.7.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH net-next 5/6] be2net: move async cmd processing to a separate routine
2014-05-28 6:30 [PATCH net-next 0/6] be2net: patch set Sathya Perla
` (3 preceding siblings ...)
2014-05-28 6:31 ` [PATCH net-next 4/6] be2net: re-factor MCCQ error status handling code Sathya Perla
@ 2014-05-28 6:31 ` Sathya Perla
2014-05-30 9:18 ` Sathya Perla
2014-05-28 6:31 ` [PATCH net-next 6/6] be2net: cleanup MCC async event processing code Sathya Perla
2014-05-31 0:28 ` [PATCH net-next 0/6] be2net: patch set David Miller
6 siblings, 1 reply; 9+ messages in thread
From: Sathya Perla @ 2014-05-28 6:31 UTC (permalink / raw)
To: netdev
For some FW cmds, the caller just issues the cmd and doesn't wait for a
response. The response handling is done in the MCCQ compl processing context
only. Move this code into a separate routine to make be_mcc_compl_process()
more manageable.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 92 ++++++++++++++++-----------
1 files changed, 54 insertions(+), 38 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index a2ecdff..de3bd8c 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -132,13 +132,61 @@ static bool be_skip_err_log(u8 opcode, u16 base_status, u16 addl_status)
return false;
}
+/* Place holder for all the async MCC cmds wherein the caller is not in a busy
+ * loop (has not issued be_mcc_notify_wait())
+ */
+static void be_async_cmd_process(struct be_adapter *adapter,
+ struct be_mcc_compl *compl,
+ struct be_cmd_resp_hdr *resp_hdr)
+{
+ enum mcc_base_status base_status = base_status(compl->status);
+ u8 opcode = resp_hdr->opcode;
+ u8 subsystem = resp_hdr->subsystem;
+
+ if (opcode == OPCODE_LOWLEVEL_LOOPBACK_TEST &&
+ subsystem == CMD_SUBSYSTEM_LOWLEVEL) {
+ complete(&adapter->et_cmd_compl);
+ return;
+ }
+
+ if ((opcode == OPCODE_COMMON_WRITE_FLASHROM ||
+ opcode == OPCODE_COMMON_WRITE_OBJECT) &&
+ subsystem == CMD_SUBSYSTEM_COMMON) {
+ adapter->flash_status = compl->status;
+ complete(&adapter->et_cmd_compl);
+ return;
+ }
+
+ if ((opcode == OPCODE_ETH_GET_STATISTICS ||
+ opcode == OPCODE_ETH_GET_PPORT_STATS) &&
+ subsystem == CMD_SUBSYSTEM_ETH &&
+ base_status == MCC_STATUS_SUCCESS) {
+ be_parse_stats(adapter);
+ adapter->stats_cmd_sent = false;
+ return;
+ }
+
+ if (opcode == OPCODE_COMMON_GET_CNTL_ADDITIONAL_ATTRIBUTES &&
+ subsystem == CMD_SUBSYSTEM_COMMON) {
+ if (base_status == MCC_STATUS_SUCCESS) {
+ struct be_cmd_resp_get_cntl_addnl_attribs *resp =
+ (void *)resp_hdr;
+ adapter->drv_stats.be_on_die_temperature =
+ resp->on_die_temperature;
+ } else {
+ adapter->be_get_temp_freq = 0;
+ }
+ return;
+ }
+}
+
static int be_mcc_compl_process(struct be_adapter *adapter,
struct be_mcc_compl *compl)
{
enum mcc_base_status base_status;
enum mcc_addl_status addl_status;
struct be_cmd_resp_hdr *resp_hdr;
- u8 opcode = 0, subsystem = 0;
+ u8 opcode, subsystem;
/* Just swap the status to host endian; mcc tag is opaquely copied
* from mcc_wrb */
@@ -148,45 +196,13 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
addl_status = addl_status(compl->status);
resp_hdr = be_decode_resp_hdr(compl->tag0, compl->tag1);
+ opcode = resp_hdr->opcode;
+ subsystem = resp_hdr->subsystem;
- if (resp_hdr) {
- opcode = resp_hdr->opcode;
- subsystem = resp_hdr->subsystem;
- }
-
- if (opcode == OPCODE_LOWLEVEL_LOOPBACK_TEST &&
- subsystem == CMD_SUBSYSTEM_LOWLEVEL) {
- complete(&adapter->et_cmd_compl);
- return 0;
- }
-
- if (((opcode == OPCODE_COMMON_WRITE_FLASHROM) ||
- (opcode == OPCODE_COMMON_WRITE_OBJECT)) &&
- (subsystem == CMD_SUBSYSTEM_COMMON)) {
- adapter->flash_status = compl->status;
- complete(&adapter->et_cmd_compl);
- }
-
- if (base_status == MCC_STATUS_SUCCESS) {
- if (((opcode == OPCODE_ETH_GET_STATISTICS) ||
- (opcode == OPCODE_ETH_GET_PPORT_STATS)) &&
- (subsystem == CMD_SUBSYSTEM_ETH)) {
- be_parse_stats(adapter);
- adapter->stats_cmd_sent = false;
- }
- if (opcode == OPCODE_COMMON_GET_CNTL_ADDITIONAL_ATTRIBUTES &&
- subsystem == CMD_SUBSYSTEM_COMMON) {
- struct be_cmd_resp_get_cntl_addnl_attribs *resp =
- (void *)resp_hdr;
- adapter->drv_stats.be_on_die_temperature =
- resp->on_die_temperature;
- }
- } else {
- if (opcode == OPCODE_COMMON_GET_CNTL_ADDITIONAL_ATTRIBUTES)
- adapter->be_get_temp_freq = 0;
+ be_async_cmd_process(adapter, compl, resp_hdr);
- if (be_skip_err_log(opcode, base_status, addl_status))
- return compl->status;
+ if (base_status != MCC_STATUS_SUCCESS &&
+ !be_skip_err_log(opcode, base_status, addl_status)) {
if (base_status == MCC_STATUS_UNAUTHORIZED_REQUEST) {
dev_warn(&adapter->pdev->dev,
--
1.7.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* RE: [PATCH net-next 5/6] be2net: move async cmd processing to a separate routine
2014-05-28 6:31 ` [PATCH net-next 5/6] be2net: move async cmd processing to a separate routine Sathya Perla
@ 2014-05-30 9:18 ` Sathya Perla
0 siblings, 0 replies; 9+ messages in thread
From: Sathya Perla @ 2014-05-30 9:18 UTC (permalink / raw)
To: Sathya Perla, netdev
> -----Original Message-----
> From: netdev-owner@vger.kernel.org [mailto:netdev-owner@vger.kernel.org]
> On Behalf Of Sathya Perla
...
>
>
> static int be_mcc_compl_process(struct be_adapter *adapter,
> struct be_mcc_compl *compl)
> {
> enum mcc_base_status base_status;
> enum mcc_addl_status addl_status;
> struct be_cmd_resp_hdr *resp_hdr;
> - u8 opcode = 0, subsystem = 0;
> + u8 opcode, subsystem;
>
> /* Just swap the status to host endian; mcc tag is opaquely copied
> * from mcc_wrb */
> @@ -148,45 +196,13 @@ static int be_mcc_compl_process(struct be_adapter
> *adapter,
> addl_status = addl_status(compl->status);
>
> resp_hdr = be_decode_resp_hdr(compl->tag0, compl->tag1);
> + opcode = resp_hdr->opcode;
> + subsystem = resp_hdr->subsystem;
>
> - if (resp_hdr) {
> - opcode = resp_hdr->opcode;
> - subsystem = resp_hdr->subsystem;
> - }
> -
I missed a NULL check here. I'll fix this up and re-send the patch set.
Thanks!
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH net-next 6/6] be2net: cleanup MCC async event processing code
2014-05-28 6:30 [PATCH net-next 0/6] be2net: patch set Sathya Perla
` (4 preceding siblings ...)
2014-05-28 6:31 ` [PATCH net-next 5/6] be2net: move async cmd processing to a separate routine Sathya Perla
@ 2014-05-28 6:31 ` Sathya Perla
2014-05-31 0:28 ` [PATCH net-next 0/6] be2net: patch set David Miller
6 siblings, 0 replies; 9+ messages in thread
From: Sathya Perla @ 2014-05-28 6:31 UTC (permalink / raw)
To: netdev
The MCC async event processing code has 2 issues:
a) because of long struct names the code indentation is badly broken
b) description and definitions of how an MCC completion is interpreted as
an async event are confusing (for e.g. the last word of an MCC event is
named "code", while "code" is just a sub-field of the last word.)
This patch fixes the structure definitions, comments and re-factors code
as needed.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 103 ++++++++++++++-------------
drivers/net/ethernet/emulex/benet/be_cmds.h | 34 ++++-----
2 files changed, 67 insertions(+), 70 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index de3bd8c..723a513 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -219,8 +219,11 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
/* Link state evt is a string of bytes; no need for endian swapping */
static void be_async_link_state_process(struct be_adapter *adapter,
- struct be_async_event_link_state *evt)
+ struct be_mcc_compl *compl)
{
+ struct be_async_event_link_state *evt =
+ (struct be_async_event_link_state *)compl;
+
/* When link status changes, link speed must be re-queried from FW */
adapter->phy.link_speed = -1;
@@ -243,10 +246,11 @@ static void be_async_link_state_process(struct be_adapter *adapter,
/* Grp5 CoS Priority evt */
static void be_async_grp5_cos_priority_process(struct be_adapter *adapter,
- struct
- be_async_event_grp5_cos_priority
- *evt)
+ struct be_mcc_compl *compl)
{
+ struct be_async_event_grp5_cos_priority *evt =
+ (struct be_async_event_grp5_cos_priority *)compl;
+
if (evt->valid) {
adapter->vlan_prio_bmap = evt->available_priority_bmap;
adapter->recommended_prio &= ~VLAN_PRIO_MASK;
@@ -257,10 +261,11 @@ static void be_async_grp5_cos_priority_process(struct be_adapter *adapter,
/* Grp5 QOS Speed evt: qos_link_speed is in units of 10 Mbps */
static void be_async_grp5_qos_speed_process(struct be_adapter *adapter,
- struct
- be_async_event_grp5_qos_link_speed
- *evt)
+ struct be_mcc_compl *compl)
{
+ struct be_async_event_grp5_qos_link_speed *evt =
+ (struct be_async_event_grp5_qos_link_speed *)compl;
+
if (adapter->phy.link_speed >= 0 &&
evt->physical_port == adapter->port_num)
adapter->phy.link_speed = le16_to_cpu(evt->qos_link_speed) * 10;
@@ -268,10 +273,11 @@ static void be_async_grp5_qos_speed_process(struct be_adapter *adapter,
/*Grp5 PVID evt*/
static void be_async_grp5_pvid_state_process(struct be_adapter *adapter,
- struct
- be_async_event_grp5_pvid_state
- *evt)
+ struct be_mcc_compl *compl)
{
+ struct be_async_event_grp5_pvid_state *evt =
+ (struct be_async_event_grp5_pvid_state *)compl;
+
if (evt->enabled) {
adapter->pvid = le16_to_cpu(evt->tag) & VLAN_VID_MASK;
dev_info(&adapter->pdev->dev, "LPVID: %d\n", adapter->pvid);
@@ -281,26 +287,21 @@ static void be_async_grp5_pvid_state_process(struct be_adapter *adapter,
}
static void be_async_grp5_evt_process(struct be_adapter *adapter,
- u32 trailer, struct be_mcc_compl *evt)
+ struct be_mcc_compl *compl)
{
- u8 event_type = 0;
-
- event_type = (trailer >> ASYNC_TRAILER_EVENT_TYPE_SHIFT) &
- ASYNC_TRAILER_EVENT_TYPE_MASK;
+ u8 event_type = (compl->flags >> ASYNC_EVENT_TYPE_SHIFT) &
+ ASYNC_EVENT_TYPE_MASK;
switch (event_type) {
case ASYNC_EVENT_COS_PRIORITY:
- be_async_grp5_cos_priority_process(adapter,
- (struct be_async_event_grp5_cos_priority *)evt);
- break;
+ be_async_grp5_cos_priority_process(adapter, compl);
+ break;
case ASYNC_EVENT_QOS_SPEED:
- be_async_grp5_qos_speed_process(adapter,
- (struct be_async_event_grp5_qos_link_speed *)evt);
- break;
+ be_async_grp5_qos_speed_process(adapter, compl);
+ break;
case ASYNC_EVENT_PVID_STATE:
- be_async_grp5_pvid_state_process(adapter,
- (struct be_async_event_grp5_pvid_state *)evt);
- break;
+ be_async_grp5_pvid_state_process(adapter, compl);
+ break;
default:
dev_warn(&adapter->pdev->dev, "Unknown grp5 event 0x%x!\n",
event_type);
@@ -309,13 +310,13 @@ static void be_async_grp5_evt_process(struct be_adapter *adapter,
}
static void be_async_dbg_evt_process(struct be_adapter *adapter,
- u32 trailer, struct be_mcc_compl *cmp)
+ struct be_mcc_compl *cmp)
{
u8 event_type = 0;
struct be_async_event_qnq *evt = (struct be_async_event_qnq *) cmp;
- event_type = (trailer >> ASYNC_TRAILER_EVENT_TYPE_SHIFT) &
- ASYNC_TRAILER_EVENT_TYPE_MASK;
+ event_type = (cmp->flags >> ASYNC_EVENT_TYPE_SHIFT) &
+ ASYNC_EVENT_TYPE_MASK;
switch (event_type) {
case ASYNC_DEBUG_EVENT_TYPE_QNQ:
@@ -330,25 +331,33 @@ static void be_async_dbg_evt_process(struct be_adapter *adapter,
}
}
-static inline bool is_link_state_evt(u32 trailer)
+static inline bool is_link_state_evt(u32 flags)
{
- return ((trailer >> ASYNC_TRAILER_EVENT_CODE_SHIFT) &
- ASYNC_TRAILER_EVENT_CODE_MASK) ==
- ASYNC_EVENT_CODE_LINK_STATE;
+ return ((flags >> ASYNC_EVENT_CODE_SHIFT) & ASYNC_EVENT_CODE_MASK) ==
+ ASYNC_EVENT_CODE_LINK_STATE;
}
-static inline bool is_grp5_evt(u32 trailer)
+static inline bool is_grp5_evt(u32 flags)
{
- return (((trailer >> ASYNC_TRAILER_EVENT_CODE_SHIFT) &
- ASYNC_TRAILER_EVENT_CODE_MASK) ==
- ASYNC_EVENT_CODE_GRP_5);
+ return ((flags >> ASYNC_EVENT_CODE_SHIFT) & ASYNC_EVENT_CODE_MASK) ==
+ ASYNC_EVENT_CODE_GRP_5;
}
-static inline bool is_dbg_evt(u32 trailer)
+static inline bool is_dbg_evt(u32 flags)
{
- return (((trailer >> ASYNC_TRAILER_EVENT_CODE_SHIFT) &
- ASYNC_TRAILER_EVENT_CODE_MASK) ==
- ASYNC_EVENT_CODE_QNQ);
+ return ((flags >> ASYNC_EVENT_CODE_SHIFT) & ASYNC_EVENT_CODE_MASK) ==
+ ASYNC_EVENT_CODE_QNQ;
+}
+
+static void be_mcc_event_process(struct be_adapter *adapter,
+ struct be_mcc_compl *compl)
+{
+ if (is_link_state_evt(compl->flags))
+ be_async_link_state_process(adapter, compl);
+ else if (is_grp5_evt(compl->flags))
+ be_async_grp5_evt_process(adapter, compl);
+ else if (is_dbg_evt(compl->flags))
+ be_async_dbg_evt_process(adapter, compl);
}
static struct be_mcc_compl *be_mcc_compl_get(struct be_adapter *adapter)
@@ -390,21 +399,13 @@ int be_process_mcc(struct be_adapter *adapter)
struct be_mcc_obj *mcc_obj = &adapter->mcc_obj;
spin_lock(&adapter->mcc_cq_lock);
+
while ((compl = be_mcc_compl_get(adapter))) {
if (compl->flags & CQE_FLAGS_ASYNC_MASK) {
- /* Interpret flags as an async trailer */
- if (is_link_state_evt(compl->flags))
- be_async_link_state_process(adapter,
- (struct be_async_event_link_state *) compl);
- else if (is_grp5_evt(compl->flags))
- be_async_grp5_evt_process(adapter,
- compl->flags, compl);
- else if (is_dbg_evt(compl->flags))
- be_async_dbg_evt_process(adapter,
- compl->flags, compl);
+ be_mcc_event_process(adapter, compl);
} else if (compl->flags & CQE_FLAGS_COMPLETED_MASK) {
- status = be_mcc_compl_process(adapter, compl);
- atomic_dec(&mcc_obj->q.used);
+ status = be_mcc_compl_process(adapter, compl);
+ atomic_dec(&mcc_obj->q.used);
}
be_mcc_compl_use(compl);
num++;
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index af62403..d4616ff 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -87,13 +87,13 @@ struct be_mcc_compl {
u32 flags; /* dword 3 */
};
-/* When the async bit of mcc_compl is set, the last 4 bytes of
- * mcc_compl is interpreted as follows:
+/* When the async bit of mcc_compl flags is set, flags
+ * is interpreted as follows:
*/
-#define ASYNC_TRAILER_EVENT_CODE_SHIFT 8 /* bits 8 - 15 */
-#define ASYNC_TRAILER_EVENT_CODE_MASK 0xFF
-#define ASYNC_TRAILER_EVENT_TYPE_SHIFT 16
-#define ASYNC_TRAILER_EVENT_TYPE_MASK 0xFF
+#define ASYNC_EVENT_CODE_SHIFT 8 /* bits 8 - 15 */
+#define ASYNC_EVENT_CODE_MASK 0xFF
+#define ASYNC_EVENT_TYPE_SHIFT 16
+#define ASYNC_EVENT_TYPE_MASK 0xFF
#define ASYNC_EVENT_CODE_LINK_STATE 0x1
#define ASYNC_EVENT_CODE_GRP_5 0x5
#define ASYNC_EVENT_QOS_SPEED 0x1
@@ -102,10 +102,6 @@ struct be_mcc_compl {
#define ASYNC_EVENT_CODE_QNQ 0x6
#define ASYNC_DEBUG_EVENT_TYPE_QNQ 1
-struct be_async_event_trailer {
- u32 code;
-};
-
enum {
LINK_DOWN = 0x0,
LINK_UP = 0x1
@@ -113,7 +109,7 @@ enum {
#define LINK_STATUS_MASK 0x1
#define LOGICAL_LINK_STATUS_MASK 0x2
-/* When the event code of an async trailer is link-state, the mcc_compl
+/* When the event code of compl->flags is link-state, the mcc_compl
* must be interpreted as follows
*/
struct be_async_event_link_state {
@@ -123,10 +119,10 @@ struct be_async_event_link_state {
u8 port_speed;
u8 port_fault;
u8 rsvd0[7];
- struct be_async_event_trailer trailer;
+ u32 flags;
} __packed;
-/* When the event code of an async trailer is GRP-5 and event_type is QOS_SPEED
+/* When the event code of compl->flags is GRP-5 and event_type is QOS_SPEED
* the mcc_compl must be interpreted as follows
*/
struct be_async_event_grp5_qos_link_speed {
@@ -134,10 +130,10 @@ struct be_async_event_grp5_qos_link_speed {
u8 rsvd[5];
u16 qos_link_speed;
u32 event_tag;
- struct be_async_event_trailer trailer;
+ u32 flags;
} __packed;
-/* When the event code of an async trailer is GRP5 and event type is
+/* When the event code of compl->flags is GRP5 and event type is
* CoS-Priority, the mcc_compl must be interpreted as follows
*/
struct be_async_event_grp5_cos_priority {
@@ -147,10 +143,10 @@ struct be_async_event_grp5_cos_priority {
u8 valid;
u8 rsvd0;
u8 event_tag;
- struct be_async_event_trailer trailer;
+ u32 flags;
} __packed;
-/* When the event code of an async trailer is GRP5 and event type is
+/* When the event code of compl->flags is GRP5 and event type is
* PVID state, the mcc_compl must be interpreted as follows
*/
struct be_async_event_grp5_pvid_state {
@@ -159,7 +155,7 @@ struct be_async_event_grp5_pvid_state {
u16 tag;
u32 event_tag;
u32 rsvd1;
- struct be_async_event_trailer trailer;
+ u32 flags;
} __packed;
/* async event indicating outer VLAN tag in QnQ */
@@ -169,7 +165,7 @@ struct be_async_event_qnq {
u16 vlan_tag;
u32 event_tag;
u8 rsvd1[4];
- struct be_async_event_trailer trailer;
+ u32 flags;
} __packed;
struct be_mcc_mailbox {
--
1.7.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH net-next 0/6] be2net: patch set
2014-05-28 6:30 [PATCH net-next 0/6] be2net: patch set Sathya Perla
` (5 preceding siblings ...)
2014-05-28 6:31 ` [PATCH net-next 6/6] be2net: cleanup MCC async event processing code Sathya Perla
@ 2014-05-31 0:28 ` David Miller
6 siblings, 0 replies; 9+ messages in thread
From: David Miller @ 2014-05-31 0:28 UTC (permalink / raw)
To: sathya.perla; +Cc: netdev
From: Sathya Perla <sathya.perla@emulex.com>
Date: Wed, 28 May 2014 12:00:59 +0530
> Patch 1 is a minor optimization for issuing multicast promisc FW cmd
> only when the interface is not already in that mode.
>
> Patch 2 provides support for VF TX-rate setting on Skyhawk-R.
>
> Patch 3 provides support for flashing new FW flash regions.
>
> Patches 4, 5, 6 cleanup the MCC processing (for FW cmds) code in be_cmds.c.
> The MCC error reporting and event handling code are areas that needed
> cleanup.
>
> Pls consider applying to the net-next tree. Thanks.
Applied, although you should give a response to Sergei's feedback.
Thank you.
^ permalink raw reply [flat|nested] 9+ messages in thread