From: Michal Schmidt <mschmidt@redhat.com>
To: netdev@vger.kernel.org
Cc: Yuval Mintz <Yuval.Mintz@qlogic.com>,
Ariel Elior <Ariel.Elior@qlogic.com>,
Dmitry Kravkov <Dmitry.Kravkov@qlogic.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 2/3] bnx2x: merge fp->disable_tpa with fp->mode
Date: Tue, 28 Apr 2015 11:34:22 +0200 [thread overview]
Message-ID: <1430213663-5657-3-git-send-email-mschmidt@redhat.com> (raw)
In-Reply-To: <1430213663-5657-1-git-send-email-mschmidt@redhat.com>
It is simpler to have the TPA mode as one three-state variable.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 26 ++++++++++++------------
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 ++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 2 +-
5 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 355d5fea5b..2a41604cdd 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -521,6 +521,7 @@ struct bnx2x_fp_txdata {
};
enum bnx2x_tpa_mode_t {
+ TPA_MODE_DISABLED,
TPA_MODE_LRO,
TPA_MODE_GRO
};
@@ -589,7 +590,6 @@ struct bnx2x_fastpath {
/* TPA related */
struct bnx2x_agg_info *tpa_info;
- u8 disable_tpa;
#ifdef BNX2X_STOP_ON_ERROR
u64 tpa_queue_used;
#endif
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index dcdbd00d02..84612b082b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -947,10 +947,10 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
u16 frag_size, pages;
#ifdef BNX2X_STOP_ON_ERROR
/* sanity check */
- if (fp->disable_tpa &&
+ if (fp->mode == TPA_MODE_DISABLED &&
(CQE_TYPE_START(cqe_fp_type) ||
CQE_TYPE_STOP(cqe_fp_type)))
- BNX2X_ERR("START/STOP packet while disable_tpa type %x\n",
+ BNX2X_ERR("START/STOP packet while TPA disabled, type %x\n",
CQE_TYPE(cqe_fp_type));
#endif
@@ -1396,7 +1396,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
DP(NETIF_MSG_IFUP,
"mtu %d rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size);
- if (!fp->disable_tpa) {
+ if (fp->mode != TPA_MODE_DISABLED) {
/* Fill the per-aggregation pool */
for (i = 0; i < MAX_AGG_QS(bp); i++) {
struct bnx2x_agg_info *tpa_info =
@@ -1410,7 +1410,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
BNX2X_ERR("Failed to allocate TPA skb pool for queue[%d] - disabling TPA on this queue!\n",
j);
bnx2x_free_tpa_pool(bp, fp, i);
- fp->disable_tpa = 1;
+ fp->mode = TPA_MODE_DISABLED;
break;
}
dma_unmap_addr_set(first_buf, mapping, 0);
@@ -1438,7 +1438,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
ring_prod);
bnx2x_free_tpa_pool(bp, fp,
MAX_AGG_QS(bp));
- fp->disable_tpa = 1;
+ fp->mode = TPA_MODE_DISABLED;
ring_prod = 0;
break;
}
@@ -1560,7 +1560,7 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp)
bnx2x_free_rx_bds(fp);
- if (!fp->disable_tpa)
+ if (fp->mode != TPA_MODE_DISABLED)
bnx2x_free_tpa_pool(bp, fp, MAX_AGG_QS(bp));
}
}
@@ -2477,19 +2477,19 @@ static void bnx2x_bz_fp(struct bnx2x *bp, int index)
/* set the tpa flag for each queue. The tpa flag determines the queue
* minimal size so it must be set prior to queue memory allocation
*/
- fp->disable_tpa = !(bp->flags & TPA_ENABLE_FLAG ||
- (bp->flags & GRO_ENABLE_FLAG &&
- bnx2x_mtu_allows_gro(bp->dev->mtu)));
if (bp->flags & TPA_ENABLE_FLAG)
fp->mode = TPA_MODE_LRO;
- else if (bp->flags & GRO_ENABLE_FLAG)
+ else if (bp->flags & GRO_ENABLE_FLAG &&
+ bnx2x_mtu_allows_gro(bp->dev->mtu))
fp->mode = TPA_MODE_GRO;
+ else
+ fp->mode = TPA_MODE_DISABLED;
/* We don't want TPA if it's disabled in bp
* or if this is an FCoE L2 ring.
*/
if (bp->disable_tpa || IS_FCOE_FP(fp))
- fp->disable_tpa = 1;
+ fp->mode = TPA_MODE_DISABLED;
}
int bnx2x_load_cnic(struct bnx2x *bp)
@@ -2610,7 +2610,7 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
/*
* Zero fastpath structures preserving invariants like napi, which are
* allocated only once, fp index, max_cos, bp pointer.
- * Also set fp->disable_tpa and txdata_ptr.
+ * Also set fp->mode and txdata_ptr.
*/
DP(NETIF_MSG_IFUP, "num queues: %d", bp->num_queues);
for_each_queue(bp, i)
@@ -4545,7 +4545,7 @@ alloc_mem_err:
* In these cases we disable the queue
* Min size is different for OOO, TPA and non-TPA queues
*/
- if (ring_size < (fp->disable_tpa ?
+ if (ring_size < (fp->mode == TPA_MODE_DISABLED ?
MIN_RX_SIZE_NONTPA : MIN_RX_SIZE_TPA)) {
/* release memory allocated for this queue */
bnx2x_free_fp_mem_at(bp, index);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index adcacda7af..d7a71758e8 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -969,7 +969,7 @@ static inline void bnx2x_free_rx_sge_range(struct bnx2x *bp,
{
int i;
- if (fp->disable_tpa)
+ if (fp->mode == TPA_MODE_DISABLED)
return;
for (i = 0; i < last; i++)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 2d067c937b..64ea5adf72 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -3128,7 +3128,7 @@ static unsigned long bnx2x_get_q_flags(struct bnx2x *bp,
__set_bit(BNX2X_Q_FLG_FORCE_DEFAULT_PRI, &flags);
}
- if (!fp->disable_tpa) {
+ if (fp->mode != TPA_MODE_DISABLED) {
__set_bit(BNX2X_Q_FLG_TPA, &flags);
__set_bit(BNX2X_Q_FLG_TPA_IPV6, &flags);
if (fp->mode == TPA_MODE_GRO)
@@ -3176,7 +3176,7 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp,
u16 sge_sz = 0;
u16 tpa_agg_size = 0;
- if (!fp->disable_tpa) {
+ if (fp->mode != TPA_MODE_DISABLED) {
pause->sge_th_lo = SGE_TH_LO(bp);
pause->sge_th_hi = SGE_TH_HI(bp);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index 15b2d16475..06b8c0d8fd 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -594,7 +594,7 @@ int bnx2x_vfpf_setup_q(struct bnx2x *bp, struct bnx2x_fastpath *fp,
bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SETUP_Q, sizeof(*req));
/* select tpa mode to request */
- if (!fp->disable_tpa) {
+ if (fp->mode != TPA_MODE_DISABLED) {
flags |= VFPF_QUEUE_FLG_TPA;
flags |= VFPF_QUEUE_FLG_TPA_IPV6;
if (fp->mode == TPA_MODE_GRO)
--
2.1.0
next prev parent reply other threads:[~2015-04-28 9:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-28 9:34 [PATCH 0/3] bnx2x: minor cleanups related to TPA bits Michal Schmidt
2015-04-28 9:34 ` [PATCH 1/3] bnx2x: mark LRO as a fixed disabled feature if disable_tpa is set Michal Schmidt
2015-04-28 9:34 ` Michal Schmidt [this message]
2015-04-28 9:34 ` [PATCH 3/3] bnx2x: remove {TPA,GRO}_ENABLE_FLAG Michal Schmidt
2015-04-28 10:45 ` [PATCH 0/3] bnx2x: minor cleanups related to TPA bits Yuval Mintz
2015-04-29 18:47 ` David Miller
2015-04-29 18:47 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430213663-5657-3-git-send-email-mschmidt@redhat.com \
--to=mschmidt@redhat.com \
--cc=Ariel.Elior@qlogic.com \
--cc=Dmitry.Kravkov@qlogic.com \
--cc=Yuval.Mintz@qlogic.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).