From: John Hurley <john.hurley@netronome.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, jiri@mellanox.com, xiyou.wangcong@gmail.com,
dsahern@gmail.com, simon.horman@netronome.com,
jakub.kicinski@netronome.com, oss-drivers@netronome.com,
John Hurley <john.hurley@netronome.com>
Subject: [PATCH net-next v4 1/5] net: core: move push MPLS functionality from OvS to core helper
Date: Mon, 1 Jul 2019 13:30:53 +0100 [thread overview]
Message-ID: <1561984257-9798-2-git-send-email-john.hurley@netronome.com> (raw)
In-Reply-To: <1561984257-9798-1-git-send-email-john.hurley@netronome.com>
Open vSwitch provides code to push an MPLS header to a packet. In
preparation for supporting this in TC, move the push code to an skb helper
that can be reused.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
---
include/linux/skbuff.h | 1 +
net/core/skbuff.c | 64 +++++++++++++++++++++++++++++++++++++++++++++++
net/openvswitch/actions.c | 31 +++--------------------
3 files changed, 69 insertions(+), 27 deletions(-)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index b5d427b..0112256 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -3446,6 +3446,7 @@ int skb_ensure_writable(struct sk_buff *skb, int write_len);
int __skb_vlan_pop(struct sk_buff *skb, u16 *vlan_tci);
int skb_vlan_pop(struct sk_buff *skb);
int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci);
+int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto);
struct sk_buff *pskb_extract(struct sk_buff *skb, int off, int to_copy,
gfp_t gfp);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 5323441..f1d1e47 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -66,6 +66,7 @@
#include <net/checksum.h>
#include <net/ip6_checksum.h>
#include <net/xfrm.h>
+#include <net/mpls.h>
#include <linux/uaccess.h>
#include <trace/events/skb.h>
@@ -5326,6 +5327,69 @@ int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci)
}
EXPORT_SYMBOL(skb_vlan_push);
+/* Update the ethertype of hdr and the skb csum value if required. */
+static void skb_mod_eth_type(struct sk_buff *skb, struct ethhdr *hdr,
+ __be16 ethertype)
+{
+ if (skb->ip_summed == CHECKSUM_COMPLETE) {
+ __be16 diff[] = { ~hdr->h_proto, ethertype };
+
+ skb->csum = csum_partial((char *)diff, sizeof(diff), skb->csum);
+ }
+
+ hdr->h_proto = ethertype;
+}
+
+/**
+ * skb_mpls_push() - push a new MPLS header after the mac header
+ *
+ * @skb: buffer
+ * @mpls_lse: MPLS label stack entry to push
+ * @mpls_proto: ethertype of the new MPLS header (expects 0x8847 or 0x8848)
+ *
+ * Expects skb->data at mac header.
+ *
+ * Returns 0 on success, -errno otherwise.
+ */
+int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto)
+{
+ struct mpls_shim_hdr *lse;
+ int err;
+
+ if (unlikely(!eth_p_mpls(mpls_proto)))
+ return -EINVAL;
+
+ /* Networking stack does not allow simultaneous Tunnel and MPLS GSO. */
+ if (skb->encapsulation)
+ return -EINVAL;
+
+ err = skb_cow_head(skb, MPLS_HLEN);
+ if (unlikely(err))
+ return err;
+
+ if (!skb->inner_protocol) {
+ skb_set_inner_network_header(skb, skb->mac_len);
+ skb_set_inner_protocol(skb, skb->protocol);
+ }
+
+ skb_push(skb, MPLS_HLEN);
+ memmove(skb_mac_header(skb) - MPLS_HLEN, skb_mac_header(skb),
+ skb->mac_len);
+ skb_reset_mac_header(skb);
+ skb_set_network_header(skb, skb->mac_len);
+
+ lse = mpls_hdr(skb);
+ lse->label_stack_entry = mpls_lse;
+ skb_postpush_rcsum(skb, lse, MPLS_HLEN);
+
+ if (skb->dev && skb->dev->type == ARPHRD_ETHER)
+ skb_mod_eth_type(skb, eth_hdr(skb), mpls_proto);
+ skb->protocol = mpls_proto;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(skb_mpls_push);
+
/**
* alloc_skb_with_frags - allocate skb with page frags
*
diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
index bd13146..a9a6c9c 100644
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -175,34 +175,11 @@ static void update_ethertype(struct sk_buff *skb, struct ethhdr *hdr,
static int push_mpls(struct sk_buff *skb, struct sw_flow_key *key,
const struct ovs_action_push_mpls *mpls)
{
- struct mpls_shim_hdr *new_mpls_lse;
-
- /* Networking stack do not allow simultaneous Tunnel and MPLS GSO. */
- if (skb->encapsulation)
- return -ENOTSUPP;
-
- if (skb_cow_head(skb, MPLS_HLEN) < 0)
- return -ENOMEM;
-
- if (!skb->inner_protocol) {
- skb_set_inner_network_header(skb, skb->mac_len);
- skb_set_inner_protocol(skb, skb->protocol);
- }
-
- skb_push(skb, MPLS_HLEN);
- memmove(skb_mac_header(skb) - MPLS_HLEN, skb_mac_header(skb),
- skb->mac_len);
- skb_reset_mac_header(skb);
- skb_set_network_header(skb, skb->mac_len);
-
- new_mpls_lse = mpls_hdr(skb);
- new_mpls_lse->label_stack_entry = mpls->mpls_lse;
-
- skb_postpush_rcsum(skb, new_mpls_lse, MPLS_HLEN);
+ int err;
- if (ovs_key_mac_proto(key) == MAC_PROTO_ETHERNET)
- update_ethertype(skb, eth_hdr(skb), mpls->mpls_ethertype);
- skb->protocol = mpls->mpls_ethertype;
+ err = skb_mpls_push(skb, mpls->mpls_lse, mpls->mpls_ethertype);
+ if (err)
+ return err;
invalidate_flow_key(key);
return 0;
--
2.7.4
next prev parent reply other threads:[~2019-07-01 12:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-01 12:30 [PATCH net-next v4 0/5] Add MPLS actions to TC John Hurley
2019-07-01 12:30 ` John Hurley [this message]
2019-07-01 12:30 ` [PATCH net-next v4 2/5] net: core: move pop MPLS functionality from OvS to core helper John Hurley
2019-07-01 12:30 ` [PATCH net-next v4 3/5] net: core: add MPLS update core helper and use in OvS John Hurley
2019-07-01 15:28 ` Willem de Bruijn
2019-07-01 12:30 ` [PATCH net-next v4 4/5] net: sched: add mpls manipulation actions to TC John Hurley
2019-07-01 15:47 ` David Ahern
2019-07-01 15:48 ` Willem de Bruijn
2019-07-01 12:30 ` [PATCH net-next v4 5/5] selftests: tc-tests: actions: add MPLS tests John Hurley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1561984257-9798-2-git-send-email-john.hurley@netronome.com \
--to=john.hurley@netronome.com \
--cc=davem@davemloft.net \
--cc=dsahern@gmail.com \
--cc=jakub.kicinski@netronome.com \
--cc=jiri@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=oss-drivers@netronome.com \
--cc=simon.horman@netronome.com \
--cc=xiyou.wangcong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).