netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marco Hartmann <marco.hartmann@nxp.com>
To: Marco Hartmann <marco.hartmann@nxp.com>,
	Andy Duan <fugang.duan@nxp.com>,
	"davem@davemloft.net" <davem@davemloft.net>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Christian Herber <christian.herber@nxp.com>
Subject: [PATCH net-next 1/1] fec: add C45 MDIO read/write support
Date: Mon, 19 Aug 2019 17:11:14 +0000	[thread overview]
Message-ID: <1566234659-7164-2-git-send-email-marco.hartmann@nxp.com> (raw)
In-Reply-To: <1566234659-7164-1-git-send-email-marco.hartmann@nxp.com>

IEEE 802.3ae clause 45 defines a modified MDIO protocol that uses a two
staged access model in order to increase the address space.

This patch adds support for C45 MDIO read and write accesses, which are
used whenever the MII_ADDR_C45 flag in the regnum argument is set.
In case it is not set, C22 accesses are used as before.

Co-developed-by: Christian Herber <christian.herber@nxp.com>
Signed-off-by: Christian Herber <christian.herber@nxp.com>
Signed-off-by: Marco Hartmann <marco.hartmann@nxp.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 65 ++++++++++++++++++++++++++++---
 1 file changed, 59 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index c01d3ec3e9af..73f8f9a149a1 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -208,8 +208,11 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
 
 /* FEC MII MMFR bits definition */
 #define FEC_MMFR_ST		(1 << 30)
+#define FEC_MMFR_ST_C45		(0)
 #define FEC_MMFR_OP_READ	(2 << 28)
+#define FEC_MMFR_OP_READ_C45	(3 << 28)
 #define FEC_MMFR_OP_WRITE	(1 << 28)
+#define FEC_MMFR_OP_ADDR_WRITE	(0)
 #define FEC_MMFR_PA(v)		((v & 0x1f) << 23)
 #define FEC_MMFR_RA(v)		((v & 0x1f) << 18)
 #define FEC_MMFR_TA		(2 << 16)
@@ -1767,7 +1770,7 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 	struct fec_enet_private *fep = bus->priv;
 	struct device *dev = &fep->pdev->dev;
 	unsigned long time_left;
-	int ret = 0;
+	int ret = 0, frame_start, frame_addr, frame_op;
 
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0)
@@ -1775,9 +1778,36 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 
 	reinit_completion(&fep->mdio_done);
 
+	if (MII_ADDR_C45 & regnum) {
+		frame_start = FEC_MMFR_ST_C45;
+
+		/* write address */
+		frame_addr = (regnum >> 16);
+		writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
+		       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
+		       FEC_MMFR_TA | (regnum & 0xFFFF),
+		       fep->hwp + FEC_MII_DATA);
+
+		/* wait for end of transfer */
+		time_left = wait_for_completion_timeout(&fep->mdio_done,
+				usecs_to_jiffies(FEC_MII_TIMEOUT));
+		if (time_left == 0) {
+			netdev_err(fep->netdev, "MDIO address write timeout\n");
+			ret  = -ETIMEDOUT;
+		}
+
+		frame_op = FEC_MMFR_OP_READ_C45;
+
+	} else {
+		/* C22 read */
+		frame_op = FEC_MMFR_OP_READ;
+		frame_start = FEC_MMFR_ST;
+		frame_addr = regnum;
+	}
+
 	/* start a read op */
-	writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
-		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
+	writel(frame_start | frame_op |
+		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
 		FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
 
 	/* wait for end of transfer */
@@ -1804,7 +1834,7 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 	struct fec_enet_private *fep = bus->priv;
 	struct device *dev = &fep->pdev->dev;
 	unsigned long time_left;
-	int ret;
+	int ret, frame_start, frame_addr;
 
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0)
@@ -1814,9 +1844,32 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 
 	reinit_completion(&fep->mdio_done);
 
+	if (MII_ADDR_C45 & regnum) {
+		frame_start = FEC_MMFR_ST_C45;
+
+		/* write address */
+		frame_addr = (regnum >> 16);
+		writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
+		       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
+		       FEC_MMFR_TA | (regnum & 0xFFFF),
+		       fep->hwp + FEC_MII_DATA);
+
+		/* wait for end of transfer */
+		time_left = wait_for_completion_timeout(&fep->mdio_done,
+			usecs_to_jiffies(FEC_MII_TIMEOUT));
+		if (time_left == 0) {
+			netdev_err(fep->netdev, "MDIO address write timeout\n");
+			ret  = -ETIMEDOUT;
+		}
+	} else {
+		/* C22 write */
+		frame_start = FEC_MMFR_ST;
+		frame_addr = regnum;
+	}
+
 	/* start a write op */
-	writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
-		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
+	writel(frame_start | FEC_MMFR_OP_WRITE |
+		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
 		FEC_MMFR_TA | FEC_MMFR_DATA(value),
 		fep->hwp + FEC_MII_DATA);
 
-- 
2.7.4


  reply	other threads:[~2019-08-19 17:11 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-19 17:11 [PATCH net-next 0/1] net: fec: add C45 MDIO read/write support Marco Hartmann
2019-08-19 17:11 ` Marco Hartmann [this message]
2019-08-20  1:35   ` [PATCH net-next 1/1] " David Miller
2019-08-20  2:08   ` Andy Duan
2019-08-21 11:44     ` Marco Hartmann
2019-08-19 22:54 ` [PATCH net-next 0/1] net: " Andrew Lunn
2019-08-20  2:32   ` [EXT] " Andy Duan
2019-08-20 13:04     ` Andrew Lunn
2019-08-21  5:55       ` Andy Duan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566234659-7164-2-git-send-email-marco.hartmann@nxp.com \
    --to=marco.hartmann@nxp.com \
    --cc=christian.herber@nxp.com \
    --cc=davem@davemloft.net \
    --cc=fugang.duan@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).