From: Michal Kubecek <mkubecek@suse.cz>
To: David Miller <davem@davemloft.net>, netdev@vger.kernel.org
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>,
Jiri Pirko <jiri@resnulli.us>, Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
John Linville <linville@tuxdriver.com>,
Stephen Hemminger <stephen@networkplumber.org>,
Johannes Berg <johannes@sipsolutions.net>,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next v7 12/17] ethtool: provide link settings with LINKINFO_GET request
Date: Wed, 9 Oct 2019 22:59:37 +0200 (CEST) [thread overview]
Message-ID: <1568f00bf7275f1a872c177e29d5800cd73e50c8.1570654310.git.mkubecek@suse.cz> (raw)
In-Reply-To: <cover.1570654310.git.mkubecek@suse.cz>
Implement LINKINFO_GET netlink request to get basic link settings provided
by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl commands.
This request provides settings not directly related to autonegotiation and
link mode selection: physical port, phy MDIO address, MDI(-X) status,
MDI(-X) control and transceiver.
LINKINFO_GET request can be used with NLM_F_DUMP (without device
identification) to request the information for all devices in current
network namespace providing the data.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
---
Documentation/networking/ethtool-netlink.rst | 37 +++++++-
include/uapi/linux/ethtool_netlink.h | 20 ++++
net/ethtool/Makefile | 2 +-
net/ethtool/common.c | 48 ++++++++++
net/ethtool/common.h | 4 +
net/ethtool/ioctl.c | 48 ----------
net/ethtool/linkinfo.c | 97 ++++++++++++++++++++
net/ethtool/netlink.c | 8 ++
net/ethtool/netlink.h | 1 +
9 files changed, 214 insertions(+), 51 deletions(-)
create mode 100644 net/ethtool/linkinfo.c
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index d12e0e4f277c..0d21469debec 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -167,12 +167,14 @@ Userspace to kernel:
===================================== ================================
``ETHTOOL_MSG_STRSET_GET`` get string set
+ ``ETHTOOL_MSG_LINKINFO_GET`` get link settings
===================================== ================================
Kernel to userspace:
===================================== ================================
``ETHTOOL_MSG_STRSET_GET_REPLY`` string set contents
+ ``ETHTOOL_MSG_LINKINFO_GET_REPLY`` link settings
===================================== ================================
``GET`` requests are sent by userspace applications to retrieve device
@@ -267,6 +269,37 @@ Flag ``ETHTOOL_A_STRSET_COUNTS`` tells kernel to only return string counts of
the sets, not the actual strings.
+LINKINFO_GET
+============
+
+Requests link settings as provided by ``ETHTOOL_GLINKSETTINGS`` except for
+link modes and autonegotiation related information. The request does not use
+any attributes and does not have any request specific flags.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_LINKINFO_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_LINKINFO_HEADER`` nested reply header
+ ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port
+ ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address
+ ``ETHTOOL_A_LINKINFO_TP_MDIX`` u8 MDI(-X) status
+ ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control
+ ``ETHTOOL_A_LINKINFO_TRANSCEIVER`` u8 transceiver
+ ==================================== ====== ==========================
+
+Attributes and their values have the same meaning as matching members of the
+corresponding ioctl structures.
+
+``LINKINFO_GET`` allows dump requests (kernel returns reply message for all
+devices supporting the request).
+
+
Request translation
===================
@@ -277,7 +310,7 @@ have their netlink replacement yet.
=================================== =====================================
ioctl command netlink command
=================================== =====================================
- ``ETHTOOL_GSET`` n/a
+ ``ETHTOOL_GSET`` ``ETHTOOL_MSG_LINKINFO_GET``
``ETHTOOL_SSET`` n/a
``ETHTOOL_GDRVINFO`` n/a
``ETHTOOL_GREGS`` n/a
@@ -351,7 +384,7 @@ have their netlink replacement yet.
``ETHTOOL_STUNABLE`` n/a
``ETHTOOL_GPHYSTATS`` n/a
``ETHTOOL_PERQUEUE`` n/a
- ``ETHTOOL_GLINKSETTINGS`` n/a
+ ``ETHTOOL_GLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_GET``
``ETHTOOL_SLINKSETTINGS`` n/a
``ETHTOOL_PHY_GTUNABLE`` n/a
``ETHTOOL_PHY_STUNABLE`` n/a
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 751d725866df..56ab2a530d22 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -15,6 +15,7 @@
enum {
ETHTOOL_MSG_USER_NONE,
ETHTOOL_MSG_STRSET_GET,
+ ETHTOOL_MSG_LINKINFO_GET,
/* add new constants above here */
__ETHTOOL_MSG_USER_CNT,
@@ -25,6 +26,7 @@ enum {
enum {
ETHTOOL_MSG_KERNEL_NONE,
ETHTOOL_MSG_STRSET_GET_REPLY,
+ ETHTOOL_MSG_LINKINFO_GET_REPLY,
/* add new constants above here */
__ETHTOOL_MSG_KERNEL_CNT,
@@ -146,6 +148,24 @@ enum {
#define ETHTOOL_RFLAG_STRSET_ALL (ETHTOOL_RFLAG_STRSET_COUNTS_ONLY)
+/* LINKINFO */
+
+enum {
+ ETHTOOL_A_LINKINFO_UNSPEC,
+ ETHTOOL_A_LINKINFO_HEADER, /* nest - _A_HEADER_* */
+ ETHTOOL_A_LINKINFO_PORT, /* u8 */
+ ETHTOOL_A_LINKINFO_PHYADDR, /* u8 */
+ ETHTOOL_A_LINKINFO_TP_MDIX, /* u8 */
+ ETHTOOL_A_LINKINFO_TP_MDIX_CTRL, /* u8 */
+ ETHTOOL_A_LINKINFO_TRANSCEIVER, /* u8 */
+
+ /* add new constants above here */
+ __ETHTOOL_A_LINKINFO_CNT,
+ ETHTOOL_A_LINKINFO_MAX = __ETHTOOL_A_LINKINFO_CNT - 1
+};
+
+#define ETHTOOL_RFLAG_LINKINFO_ALL 0
+
/* generic netlink info */
#define ETHTOOL_GENL_NAME "ethtool"
#define ETHTOOL_GENL_VERSION 1
diff --git a/net/ethtool/Makefile b/net/ethtool/Makefile
index 11ceb00821b3..28666a0eede8 100644
--- a/net/ethtool/Makefile
+++ b/net/ethtool/Makefile
@@ -4,4 +4,4 @@ obj-y += ioctl.o common.o
obj-$(CONFIG_ETHTOOL_NETLINK) += ethtool_nl.o
-ethtool_nl-y := netlink.o bitset.o strset.o
+ethtool_nl-y := netlink.o bitset.o strset.o linkinfo.o
diff --git a/net/ethtool/common.c b/net/ethtool/common.c
index 220d6b539180..84fed2eecb55 100644
--- a/net/ethtool/common.c
+++ b/net/ethtool/common.c
@@ -83,3 +83,51 @@ phy_tunable_strings[__ETHTOOL_PHY_TUNABLE_COUNT][ETH_GSTRING_LEN] = {
[ETHTOOL_PHY_FAST_LINK_DOWN] = "phy-fast-link-down",
[ETHTOOL_PHY_EDPD] = "phy-energy-detect-power-down",
};
+
+/* return false if legacy contained non-0 deprecated fields
+ * maxtxpkt/maxrxpkt. rest of ksettings always updated
+ */
+bool
+convert_legacy_settings_to_link_ksettings(
+ struct ethtool_link_ksettings *link_ksettings,
+ const struct ethtool_cmd *legacy_settings)
+{
+ bool retval = true;
+
+ memset(link_ksettings, 0, sizeof(*link_ksettings));
+
+ /* This is used to tell users that driver is still using these
+ * deprecated legacy fields, and they should not use
+ * %ETHTOOL_GLINKSETTINGS/%ETHTOOL_SLINKSETTINGS
+ */
+ if (legacy_settings->maxtxpkt ||
+ legacy_settings->maxrxpkt)
+ retval = false;
+
+ ethtool_convert_legacy_u32_to_link_mode(
+ link_ksettings->link_modes.supported,
+ legacy_settings->supported);
+ ethtool_convert_legacy_u32_to_link_mode(
+ link_ksettings->link_modes.advertising,
+ legacy_settings->advertising);
+ ethtool_convert_legacy_u32_to_link_mode(
+ link_ksettings->link_modes.lp_advertising,
+ legacy_settings->lp_advertising);
+ link_ksettings->base.speed
+ = ethtool_cmd_speed(legacy_settings);
+ link_ksettings->base.duplex
+ = legacy_settings->duplex;
+ link_ksettings->base.port
+ = legacy_settings->port;
+ link_ksettings->base.phy_address
+ = legacy_settings->phy_address;
+ link_ksettings->base.autoneg
+ = legacy_settings->autoneg;
+ link_ksettings->base.mdio_support
+ = legacy_settings->mdio_support;
+ link_ksettings->base.eth_tp_mdix
+ = legacy_settings->eth_tp_mdix;
+ link_ksettings->base.eth_tp_mdix_ctrl
+ = legacy_settings->eth_tp_mdix_ctrl;
+ return retval;
+}
diff --git a/net/ethtool/common.h b/net/ethtool/common.h
index 41b2efc1e4e1..0381936d8e1e 100644
--- a/net/ethtool/common.h
+++ b/net/ethtool/common.h
@@ -14,4 +14,8 @@ tunable_strings[__ETHTOOL_TUNABLE_COUNT][ETH_GSTRING_LEN];
extern const char
phy_tunable_strings[__ETHTOOL_PHY_TUNABLE_COUNT][ETH_GSTRING_LEN];
+bool convert_legacy_settings_to_link_ksettings(
+ struct ethtool_link_ksettings *link_ksettings,
+ const struct ethtool_cmd *legacy_settings);
+
#endif /* _ETHTOOL_COMMON_H */
diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c
index 94307fbba96b..2cd04cb6b4b9 100644
--- a/net/ethtool/ioctl.c
+++ b/net/ethtool/ioctl.c
@@ -352,54 +352,6 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
}
EXPORT_SYMBOL(ethtool_convert_link_mode_to_legacy_u32);
-/* return false if legacy contained non-0 deprecated fields
- * maxtxpkt/maxrxpkt. rest of ksettings always updated
- */
-static bool
-convert_legacy_settings_to_link_ksettings(
- struct ethtool_link_ksettings *link_ksettings,
- const struct ethtool_cmd *legacy_settings)
-{
- bool retval = true;
-
- memset(link_ksettings, 0, sizeof(*link_ksettings));
-
- /* This is used to tell users that driver is still using these
- * deprecated legacy fields, and they should not use
- * %ETHTOOL_GLINKSETTINGS/%ETHTOOL_SLINKSETTINGS
- */
- if (legacy_settings->maxtxpkt ||
- legacy_settings->maxrxpkt)
- retval = false;
-
- ethtool_convert_legacy_u32_to_link_mode(
- link_ksettings->link_modes.supported,
- legacy_settings->supported);
- ethtool_convert_legacy_u32_to_link_mode(
- link_ksettings->link_modes.advertising,
- legacy_settings->advertising);
- ethtool_convert_legacy_u32_to_link_mode(
- link_ksettings->link_modes.lp_advertising,
- legacy_settings->lp_advertising);
- link_ksettings->base.speed
- = ethtool_cmd_speed(legacy_settings);
- link_ksettings->base.duplex
- = legacy_settings->duplex;
- link_ksettings->base.port
- = legacy_settings->port;
- link_ksettings->base.phy_address
- = legacy_settings->phy_address;
- link_ksettings->base.autoneg
- = legacy_settings->autoneg;
- link_ksettings->base.mdio_support
- = legacy_settings->mdio_support;
- link_ksettings->base.eth_tp_mdix
- = legacy_settings->eth_tp_mdix;
- link_ksettings->base.eth_tp_mdix_ctrl
- = legacy_settings->eth_tp_mdix_ctrl;
- return retval;
-}
-
/* return false if ksettings link modes had higher bits
* set. legacy_settings always updated (best effort)
*/
diff --git a/net/ethtool/linkinfo.c b/net/ethtool/linkinfo.c
new file mode 100644
index 000000000000..c28ca4d9dd2a
--- /dev/null
+++ b/net/ethtool/linkinfo.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
+
+#include "netlink.h"
+#include "common.h"
+
+struct linkinfo_req_info {
+ struct ethnl_req_info base;
+};
+
+struct linkinfo_reply_data {
+ struct ethnl_reply_data base;
+ struct ethtool_link_ksettings ksettings;
+ struct ethtool_link_settings *lsettings;
+};
+
+static const struct nla_policy
+linkinfo_get_policy[ETHTOOL_A_LINKINFO_MAX + 1] = {
+ [ETHTOOL_A_LINKINFO_UNSPEC] = { .type = NLA_REJECT },
+ [ETHTOOL_A_LINKINFO_HEADER] = { .type = NLA_NESTED },
+ [ETHTOOL_A_LINKINFO_PORT] = { .type = NLA_REJECT },
+ [ETHTOOL_A_LINKINFO_PHYADDR] = { .type = NLA_REJECT },
+ [ETHTOOL_A_LINKINFO_TP_MDIX] = { .type = NLA_REJECT },
+ [ETHTOOL_A_LINKINFO_TP_MDIX_CTRL] = { .type = NLA_REJECT },
+ [ETHTOOL_A_LINKINFO_TRANSCEIVER] = { .type = NLA_REJECT },
+};
+
+/* prepare_data() handler */
+static int linkinfo_prepare(const struct ethnl_req_info *req_base,
+ struct ethnl_reply_data *reply_base,
+ struct genl_info *info)
+{
+ struct linkinfo_reply_data *data =
+ container_of(reply_base, struct linkinfo_reply_data, base);
+ struct net_device *dev = reply_base->dev;
+ int ret;
+
+ data->lsettings = &data->ksettings.base;
+
+ ret = ethnl_before_ops(dev);
+ if (ret < 0)
+ return ret;
+ ret = __ethtool_get_link_ksettings(dev, &data->ksettings);
+ if (ret < 0 && info)
+ GENL_SET_ERR_MSG(info, "failed to retrieve link settings");
+ ethnl_after_ops(dev);
+
+ return ret;
+}
+
+/* reply_size() handler */
+static int linkinfo_size(const struct ethnl_req_info *req_base,
+ const struct ethnl_reply_data *reply_base)
+{
+ return nla_total_size(sizeof(u8)) /* LINKINFO_PORT */
+ + nla_total_size(sizeof(u8)) /* LINKINFO_PHYADDR */
+ + nla_total_size(sizeof(u8)) /* LINKINFO_TP_MDIX */
+ + nla_total_size(sizeof(u8)) /* LINKINFO_TP_MDIX_CTRL */
+ + nla_total_size(sizeof(u8)) /* LINKINFO_TRANSCEIVER */
+ + 0;
+}
+
+/* fill_reply() handler */
+static int linkinfo_fill(struct sk_buff *skb,
+ const struct ethnl_req_info *req_base,
+ const struct ethnl_reply_data *reply_base)
+{
+ const struct linkinfo_reply_data *data =
+ container_of(reply_base, struct linkinfo_reply_data, base);
+
+ if (nla_put_u8(skb, ETHTOOL_A_LINKINFO_PORT, data->lsettings->port) ||
+ nla_put_u8(skb, ETHTOOL_A_LINKINFO_PHYADDR,
+ data->lsettings->phy_address) ||
+ nla_put_u8(skb, ETHTOOL_A_LINKINFO_TP_MDIX,
+ data->lsettings->eth_tp_mdix) ||
+ nla_put_u8(skb, ETHTOOL_A_LINKINFO_TP_MDIX_CTRL,
+ data->lsettings->eth_tp_mdix_ctrl) ||
+ nla_put_u8(skb, ETHTOOL_A_LINKINFO_TRANSCEIVER,
+ data->lsettings->transceiver))
+ return -EMSGSIZE;
+
+ return 0;
+}
+
+const struct get_request_ops linkinfo_request_ops = {
+ .request_cmd = ETHTOOL_MSG_LINKINFO_GET,
+ .reply_cmd = ETHTOOL_MSG_LINKINFO_GET_REPLY,
+ .hdr_attr = ETHTOOL_A_LINKINFO_HEADER,
+ .max_attr = ETHTOOL_A_LINKINFO_MAX,
+ .req_info_size = sizeof(struct linkinfo_req_info),
+ .reply_data_size = sizeof(struct linkinfo_reply_data),
+ .request_policy = linkinfo_get_policy,
+ .all_reqflags = ETHTOOL_RFLAG_LINKINFO_ALL,
+
+ .prepare_data = linkinfo_prepare,
+ .reply_size = linkinfo_size,
+ .fill_reply = linkinfo_fill,
+};
diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
index bc042502115f..47b6aefa0bf9 100644
--- a/net/ethtool/netlink.c
+++ b/net/ethtool/netlink.c
@@ -280,6 +280,7 @@ struct ethnl_dump_ctx {
static const struct get_request_ops *get_requests[__ETHTOOL_MSG_USER_CNT] = {
[ETHTOOL_MSG_STRSET_GET] = &strset_request_ops,
+ [ETHTOOL_MSG_LINKINFO_GET] = &linkinfo_request_ops,
};
static struct ethnl_dump_ctx *ethnl_dump_context(struct netlink_callback *cb)
@@ -620,6 +621,13 @@ static const struct genl_ops ethtool_genl_ops[] = {
.dumpit = ethnl_get_dumpit,
.done = ethnl_get_done,
},
+ {
+ .cmd = ETHTOOL_MSG_LINKINFO_GET,
+ .doit = ethnl_get_doit,
+ .start = ethnl_get_start,
+ .dumpit = ethnl_get_dumpit,
+ .done = ethnl_get_done,
+ },
};
static const struct genl_multicast_group ethtool_nl_mcgrps[] = {
diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
index 07268c916518..a0ae47bebe51 100644
--- a/net/ethtool/netlink.h
+++ b/net/ethtool/netlink.h
@@ -347,5 +347,6 @@ struct get_request_ops {
/* request handlers */
extern const struct get_request_ops strset_request_ops;
+extern const struct get_request_ops linkinfo_request_ops;
#endif /* _NET_ETHTOOL_NETLINK_H */
--
2.23.0
next prev parent reply other threads:[~2019-10-09 21:00 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 20:59 [PATCH net-next v7 00/17] ethtool netlink interface, part 1 Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 01/17] rtnetlink: provide permanent hardware address in RTM_NEWLINK Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 02/17] netlink: rename nl80211_validate_nested() to nla_validate_nested() Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 03/17] ethtool: move to its own directory Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 04/17] ethtool: introduce ethtool netlink interface Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 05/17] ethtool: helper functions for " Michal Kubecek
2019-10-10 13:42 ` Jiri Pirko
2019-10-10 17:13 ` Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 06/17] ethtool: netlink bitset handling Michal Kubecek
2019-10-11 13:34 ` Jiri Pirko
2019-10-14 11:18 ` Michal Kubecek
2019-10-14 13:02 ` Jiri Pirko
2019-10-21 7:18 ` Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 07/17] ethtool: support for netlink notifications Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 08/17] ethtool: move string arrays into common file Michal Kubecek
2019-10-10 13:27 ` Jiri Pirko
2019-10-09 20:59 ` [PATCH net-next v7 09/17] ethtool: generic handlers for GET requests Michal Kubecek
2019-10-10 13:56 ` Jiri Pirko
2019-10-10 18:04 ` Michal Kubecek
2019-10-10 18:18 ` Johannes Berg
2019-10-10 20:00 ` Michal Kubecek
2019-10-11 8:08 ` Johannes Berg
2019-10-11 6:06 ` Jiri Pirko
2019-10-10 15:23 ` Jiri Pirko
2019-10-09 20:59 ` [PATCH net-next v7 10/17] ethtool: provide string sets with STRSET_GET request Michal Kubecek
2019-10-10 13:59 ` Jiri Pirko
2019-10-10 18:05 ` Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 11/17] ethtool: provide link mode names as a string set Michal Kubecek
2019-10-09 20:59 ` Michal Kubecek [this message]
2019-10-10 15:59 ` [PATCH net-next v7 12/17] ethtool: provide link settings with LINKINFO_GET request Jiri Pirko
2019-10-10 20:15 ` Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 13/17] ethtool: add standard notification handler Michal Kubecek
2019-10-10 15:25 ` Jiri Pirko
2019-10-10 18:17 ` Michal Kubecek
2019-10-11 5:56 ` Jiri Pirko
2019-10-11 5:59 ` Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 14/17] ethtool: set link settings with LINKINFO_SET request Michal Kubecek
2019-10-10 15:37 ` Jiri Pirko
2019-10-10 19:30 ` Michal Kubecek
2019-10-11 5:59 ` Jiri Pirko
2019-10-12 16:33 ` Jiri Pirko
2019-10-14 8:48 ` Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 15/17] ethtool: provide link mode information with LINKMODES_GET request Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 16/17] ethtool: set link modes related data with LINKMODES_SET request Michal Kubecek
2019-10-09 20:59 ` [PATCH net-next v7 17/17] ethtool: provide link state with LINKSTATE_GET request Michal Kubecek
2019-10-11 0:48 ` [PATCH net-next v7 00/17] ethtool netlink interface, part 1 Jakub Kicinski
2019-10-11 6:46 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1568f00bf7275f1a872c177e29d5800cd73e50c8.1570654310.git.mkubecek@suse.cz \
--to=mkubecek@suse.cz \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=jakub.kicinski@netronome.com \
--cc=jiri@resnulli.us \
--cc=johannes@sipsolutions.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).