netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: sunil.kovvuri@gmail.com
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kubakici@wp.pl,
	Sunil Goutham <sgoutham@marvell.com>
Subject: [PATCH v2 01/17] octeontx2-pf: Add Marvell OcteonTX2 NIC driver
Date: Tue, 14 Jan 2020 12:32:04 +0530	[thread overview]
Message-ID: <1578985340-28775-2-git-send-email-sunil.kovvuri@gmail.com> (raw)
In-Reply-To: <1578985340-28775-1-git-send-email-sunil.kovvuri@gmail.com>

From: Sunil Goutham <sgoutham@marvell.com>

This patch adds template for the Marvell's OcteonTX2 network
controller's physical function driver. Just the probe, PCI
specific initialization and netdev registration.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/Kconfig     |   8 +
 drivers/net/ethernet/marvell/octeontx2/Makefile    |   2 +
 .../net/ethernet/marvell/octeontx2/nic/Makefile    |  10 +
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |  77 ++++++++
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   | 220 +++++++++++++++++++++
 .../net/ethernet/marvell/octeontx2/nic/otx2_reg.h  |  51 +++++
 6 files changed, 368 insertions(+)
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/Makefile
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h

diff --git a/drivers/net/ethernet/marvell/octeontx2/Kconfig b/drivers/net/ethernet/marvell/octeontx2/Kconfig
index fb34fbd..ced514c 100644
--- a/drivers/net/ethernet/marvell/octeontx2/Kconfig
+++ b/drivers/net/ethernet/marvell/octeontx2/Kconfig
@@ -25,3 +25,11 @@ config NDC_DIS_DYNAMIC_CACHING
 	  This config option disables caching of dynamic entries such as NIX SQEs
 	  , NPA stack pages etc in NDC. Also locks down NIX SQ/CQ/RQ/RSS and
 	  NPA Aura/Pool contexts.
+
+config OCTEONTX2_PF
+	tristate "Marvell OcteonTX2 NIC Physical Function driver"
+	select OCTEONTX2_MBOX
+	depends on (64BIT && COMPILE_TEST) || ARM64
+	depends on PCI
+	help
+	  This driver supports Marvell's OcteonTX2 NIC physical function.
diff --git a/drivers/net/ethernet/marvell/octeontx2/Makefile b/drivers/net/ethernet/marvell/octeontx2/Makefile
index e579dcd..0064a69 100644
--- a/drivers/net/ethernet/marvell/octeontx2/Makefile
+++ b/drivers/net/ethernet/marvell/octeontx2/Makefile
@@ -3,4 +3,6 @@
 # Makefile for Marvell OcteonTX2 device drivers.
 #
 
+obj-$(CONFIG_OCTEONTX2_MBOX) += af/
 obj-$(CONFIG_OCTEONTX2_AF) += af/
+obj-$(CONFIG_OCTEONTX2_PF) += nic/
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/Makefile b/drivers/net/ethernet/marvell/octeontx2/nic/Makefile
new file mode 100644
index 0000000..622b803
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Marvell's OcteonTX2 ethernet device drivers
+#
+
+obj-$(CONFIG_OCTEONTX2_PF) += octeontx2_nicpf.o
+
+octeontx2_nicpf-y := otx2_pf.o
+
+ccflags-y += -I$(srctree)/drivers/net/ethernet/marvell/octeontx2/af
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
new file mode 100644
index 0000000..9d52ab3
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell OcteonTx2 RVU Ethernet driver
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef OTX2_COMMON_H
+#define OTX2_COMMON_H
+
+#include <linux/pci.h>
+
+#include "otx2_reg.h"
+
+/* PCI device IDs */
+#define PCI_DEVID_OCTEONTX2_RVU_PF              0xA063
+
+/* PCI BAR nos */
+#define PCI_CFG_REG_BAR_NUM                     2
+
+struct otx2_hw {
+	struct pci_dev		*pdev;
+	u16                     rx_queues;
+	u16                     tx_queues;
+	u16			max_queues;
+};
+
+struct otx2_nic {
+	void __iomem		*reg_base;
+	struct net_device	*netdev;
+
+	struct otx2_hw		hw;
+	struct pci_dev		*pdev;
+	struct device		*dev;
+};
+
+/* Register read/write APIs */
+static inline void __iomem *otx2_get_regaddr(struct otx2_nic *nic, u64 offset)
+{
+	u64 blkaddr;
+
+	switch ((offset >> RVU_FUNC_BLKADDR_SHIFT) & RVU_FUNC_BLKADDR_MASK) {
+	case BLKTYPE_NIX:
+		blkaddr = BLKADDR_NIX0;
+		break;
+	case BLKTYPE_NPA:
+		blkaddr = BLKADDR_NPA;
+		break;
+	default:
+		blkaddr = BLKADDR_RVUM;
+		break;
+	};
+
+	offset &= ~(RVU_FUNC_BLKADDR_MASK << RVU_FUNC_BLKADDR_SHIFT);
+	offset |= (blkaddr << RVU_FUNC_BLKADDR_SHIFT);
+
+	return nic->reg_base + offset;
+}
+
+static inline void otx2_write64(struct otx2_nic *nic, u64 offset, u64 val)
+{
+	void __iomem *addr = otx2_get_regaddr(nic, offset);
+
+	writeq(val, addr);
+}
+
+static inline u64 otx2_read64(struct otx2_nic *nic, u64 offset)
+{
+	void __iomem *addr = otx2_get_regaddr(nic, offset);
+
+	return readq(addr);
+}
+
+#endif /* OTX2_COMMON_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
new file mode 100644
index 0000000..cf60efa
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell OcteonTx2 RVU Physcial Function ethernet driver
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+#include <linux/of.h>
+#include <linux/if_vlan.h>
+#include <linux/iommu.h>
+#include <net/ip.h>
+
+#include "otx2_common.h"
+
+#define DRV_NAME	"octeontx2-nicpf"
+#define DRV_STRING	"Marvell OcteonTX2 NIC Physical Function Driver"
+#define DRV_VERSION	"1.0"
+
+/* Supported devices */
+static const struct pci_device_id otx2_pf_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_RVU_PF) },
+	{ 0, }  /* end of table */
+};
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION(DRV_STRING);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, otx2_pf_id_table);
+
+static int otx2_set_real_num_queues(struct net_device *netdev,
+				    int tx_queues, int rx_queues)
+{
+	int err;
+
+	err = netif_set_real_num_tx_queues(netdev, tx_queues);
+	if (err) {
+		netdev_err(netdev,
+			   "Failed to set no of Tx queues: %d\n", tx_queues);
+		return err;
+	}
+
+	err = netif_set_real_num_rx_queues(netdev, rx_queues);
+	if (err)
+		netdev_err(netdev,
+			   "Failed to set no of Rx queues: %d\n", rx_queues);
+	return err;
+}
+
+static int otx2_open(struct net_device *netdev)
+{
+	netif_carrier_off(netdev);
+
+	return 0;
+}
+
+static int otx2_stop(struct net_device *netdev)
+{
+	return 0;
+}
+
+static const struct net_device_ops otx2_netdev_ops = {
+	.ndo_open		= otx2_open,
+	.ndo_stop		= otx2_stop,
+};
+
+static int otx2_check_pf_usable(struct otx2_nic *nic)
+{
+	u64 rev;
+
+	rev = otx2_read64(nic, RVU_PF_BLOCK_ADDRX_DISC(BLKADDR_RVUM));
+	rev = (rev >> 12) & 0xFF;
+	/* Check if AF has setup revision for RVUM block,
+	 * otherwise this driver probe should be deferred
+	 * until AF driver comes up.
+	 */
+	if (!rev) {
+		dev_warn(nic->dev,
+			 "AF is not initialized, deferring probe\n");
+		return -EPROBE_DEFER;
+	}
+	return 0;
+}
+
+static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct device *dev = &pdev->dev;
+	struct net_device *netdev;
+	struct otx2_nic *pf;
+	struct otx2_hw *hw;
+	int err, qcount;
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(dev, "Failed to enable PCI device\n");
+		return err;
+	}
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err) {
+		dev_err(dev, "PCI request regions failed 0x%x\n", err);
+		return err;
+	}
+
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(48));
+	if (err) {
+		dev_err(dev, "Unable to set DMA mask\n");
+		goto err_release_regions;
+	}
+
+	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(48));
+	if (err) {
+		dev_err(dev, "Unable to set consistent DMA mask\n");
+		goto err_release_regions;
+	}
+
+	pci_set_master(pdev);
+
+	/* Set number of queues */
+	qcount = min_t(int, num_online_cpus(), num_online_cpus());
+
+	netdev = alloc_etherdev_mqs(sizeof(*pf), qcount, qcount);
+	if (!netdev) {
+		err = -ENOMEM;
+		goto err_release_regions;
+	}
+
+	pci_set_drvdata(pdev, netdev);
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+	pf = netdev_priv(netdev);
+	pf->netdev = netdev;
+	pf->pdev = pdev;
+	pf->dev = dev;
+
+	hw = &pf->hw;
+	hw->pdev = pdev;
+	hw->rx_queues = qcount;
+	hw->tx_queues = qcount;
+	hw->max_queues = qcount;
+
+	/* Map CSRs */
+	pf->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0);
+	if (!pf->reg_base) {
+		dev_err(dev, "Unable to map physical function CSRs, aborting\n");
+		err = -ENOMEM;
+		goto err_free_netdev;
+	}
+
+	err = otx2_check_pf_usable(pf);
+	if (err)
+		goto err_free_netdev;
+
+	err = otx2_set_real_num_queues(netdev, hw->tx_queues, hw->rx_queues);
+	if (err)
+		goto err_free_netdev;
+
+	netdev->netdev_ops = &otx2_netdev_ops;
+
+	err = register_netdev(netdev);
+	if (err) {
+		dev_err(dev, "Failed to register netdevice\n");
+		goto err_free_netdev;
+	}
+
+	return 0;
+
+err_free_netdev:
+	pci_set_drvdata(pdev, NULL);
+	free_netdev(netdev);
+err_release_regions:
+	pci_release_regions(pdev);
+	return err;
+}
+
+static void otx2_remove(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct otx2_nic *pf;
+
+	if (!netdev)
+		return;
+
+	pf = netdev_priv(netdev);
+
+	unregister_netdev(netdev);
+	pci_free_irq_vectors(pf->pdev);
+	pci_set_drvdata(pdev, NULL);
+	free_netdev(netdev);
+	pci_release_regions(pdev);
+}
+
+static struct pci_driver otx2_pf_driver = {
+	.name = DRV_NAME,
+	.id_table = otx2_pf_id_table,
+	.probe = otx2_probe,
+	.shutdown = otx2_remove,
+	.remove = otx2_remove,
+};
+
+static int __init otx2_rvupf_init_module(void)
+{
+	pr_info("%s: %s\n", DRV_NAME, DRV_STRING);
+
+	return pci_register_driver(&otx2_pf_driver);
+}
+
+static void __exit otx2_rvupf_cleanup_module(void)
+{
+	pci_unregister_driver(&otx2_pf_driver);
+}
+
+module_init(otx2_rvupf_init_module);
+module_exit(otx2_rvupf_cleanup_module);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h
new file mode 100644
index 0000000..d0bd64a
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell OcteonTx2 RVU Ethernet driver
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef OTX2_REG_H
+#define OTX2_REG_H
+
+#include <rvu_struct.h>
+
+/* RVU PF registers */
+#define	RVU_PF_VFX_PFVF_MBOX0		    (0x00000)
+#define	RVU_PF_VFX_PFVF_MBOX1		    (0x00008)
+#define RVU_PF_VFX_PFVF_MBOXX(a, b)         (0x0 | (a) << 12 | (b) << 3)
+#define RVU_PF_VF_BAR4_ADDR                 (0x10)
+#define RVU_PF_BLOCK_ADDRX_DISC(a)          (0x200 | (a) << 3)
+#define RVU_PF_VFME_STATUSX(a)              (0x800 | (a) << 3)
+#define RVU_PF_VFTRPENDX(a)                 (0x820 | (a) << 3)
+#define RVU_PF_VFTRPEND_W1SX(a)             (0x840 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INTX(a)            (0x880 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_W1SX(a)        (0x8A0 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_ENA_W1SX(a)    (0x8C0 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_ENA_W1CX(a)    (0x8E0 | (a) << 3)
+#define RVU_PF_VFFLR_INTX(a)                (0x900 | (a) << 3)
+#define RVU_PF_VFFLR_INT_W1SX(a)            (0x920 | (a) << 3)
+#define RVU_PF_VFFLR_INT_ENA_W1SX(a)        (0x940 | (a) << 3)
+#define RVU_PF_VFFLR_INT_ENA_W1CX(a)        (0x960 | (a) << 3)
+#define RVU_PF_VFME_INTX(a)                 (0x980 | (a) << 3)
+#define RVU_PF_VFME_INT_W1SX(a)             (0x9A0 | (a) << 3)
+#define RVU_PF_VFME_INT_ENA_W1SX(a)         (0x9C0 | (a) << 3)
+#define RVU_PF_VFME_INT_ENA_W1CX(a)         (0x9E0 | (a) << 3)
+#define RVU_PF_PFAF_MBOX0                   (0xC00)
+#define RVU_PF_PFAF_MBOX1                   (0xC08)
+#define RVU_PF_PFAF_MBOXX(a)                (0xC00 | (a) << 3)
+#define RVU_PF_INT                          (0xc20)
+#define RVU_PF_INT_W1S                      (0xc28)
+#define RVU_PF_INT_ENA_W1S                  (0xc30)
+#define RVU_PF_INT_ENA_W1C                  (0xc38)
+#define RVU_PF_MSIX_VECX_ADDR(a)            (0x000 | (a) << 4)
+#define RVU_PF_MSIX_VECX_CTL(a)             (0x008 | (a) << 4)
+#define RVU_PF_MSIX_PBAX(a)                 (0xF0000 | (a) << 3)
+
+#define RVU_FUNC_BLKADDR_SHIFT		20
+#define RVU_FUNC_BLKADDR_MASK		0x1FULL
+
+#endif /* OTX2_REG_H */
-- 
2.7.4


  reply	other threads:[~2020-01-14  7:02 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-14  7:02 [PATCH v2 00/17] octeontx2-pf: Add network driver for physical function sunil.kovvuri
2020-01-14  7:02 ` sunil.kovvuri [this message]
2020-01-14  7:02 ` [PATCH v2 02/17] octeontx2-pf: Mailbox communication with AF sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 03/17] octeontx2-pf: Attach NIX and NPA block LFs sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 04/17] octeontx2-pf: Initialize and config queues sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 05/17] octeontx2-pf: Setup interrupts and NAPI handler sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 06/17] octeontx2-pf: Receive packet handling support sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 07/17] octeontx2-pf: Add packet transmission support sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 08/17] octeontx2-pf: Register and handle link notifications sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 09/17] octeontx2-pf: MTU, MAC and RX mode config support sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 10/17] octeontx2-pf: Error handling support sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 11/17] octeontx2-pf: Receive side scaling support sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 12/17] octeontx2-pf: TCP segmentation offload support sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 13/17] octeontx2-pf: Add ndo_get_stats64 sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 14/17] octeontx2-pf: Add basic ethtool support sunil.kovvuri
2020-01-14 10:08   ` Michal Kubecek
2020-01-14 10:26     ` Sunil Kovvuri
2020-01-14 13:17   ` Jakub Kicinski
2020-01-14  7:02 ` [PATCH v2 15/17] octeontx2-pf: ethtool RSS config support sunil.kovvuri
2020-01-14 10:19   ` Michal Kubecek
2020-01-14 10:29     ` Sunil Kovvuri
2020-01-14  7:02 ` [PATCH v2 16/17] Documentation: net: octeontx2: Add RVU HW and drivers overview sunil.kovvuri
2020-01-14  7:02 ` [PATCH v2 17/17] MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver sunil.kovvuri

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1578985340-28775-2-git-send-email-sunil.kovvuri@gmail.com \
    --to=sunil.kovvuri@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kubakici@wp.pl \
    --cc=netdev@vger.kernel.org \
    --cc=sgoutham@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).