From: Moshe Shemesh <moshe@mellanox.com>
To: "David S. Miller" <davem@davemloft.net>,
Jiri Pirko <jiri@mellanox.com>,
Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Moshe Shemesh <moshe@mellanox.com>
Subject: [PATCH net-next RFC 09/13] devlink: Add enable_remote_dev_reset generic parameter
Date: Mon, 27 Jul 2020 14:02:29 +0300 [thread overview]
Message-ID: <1595847753-2234-10-git-send-email-moshe@mellanox.com> (raw)
In-Reply-To: <1595847753-2234-1-git-send-email-moshe@mellanox.com>
The enable_remote_dev_reset devlink param flags that the host admin
allows device resets that can be initiated by other hosts. This
parameter is useful for setups where a device is shared by different
hosts, such as multi-host setup. Once the user set this parameter to
false, the driver should NACK any attempt to reset the device while the
driver is loaded.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
---
Documentation/networking/devlink/devlink-params.rst | 6 ++++++
include/net/devlink.h | 4 ++++
net/core/devlink.c | 5 +++++
3 files changed, 15 insertions(+)
diff --git a/Documentation/networking/devlink/devlink-params.rst b/Documentation/networking/devlink/devlink-params.rst
index d075fd090b3d..54c9f107c4b0 100644
--- a/Documentation/networking/devlink/devlink-params.rst
+++ b/Documentation/networking/devlink/devlink-params.rst
@@ -108,3 +108,9 @@ own name.
* - ``region_snapshot_enable``
- Boolean
- Enable capture of ``devlink-region`` snapshots.
+ * - ``enable_remote_dev_reset``
+ - Boolean
+ - Enable device reset by remote host. When cleared, the device driver
+ will NACK any attempt of other host to reset the device. This parameter
+ is useful for setups where a device is shared by different hosts, such
+ as multi-host setup.
diff --git a/include/net/devlink.h b/include/net/devlink.h
index b291cd8d6be6..125e7bb9bb82 100644
--- a/include/net/devlink.h
+++ b/include/net/devlink.h
@@ -420,6 +420,7 @@ enum devlink_param_generic_id {
DEVLINK_PARAM_GENERIC_ID_FW_LOAD_POLICY,
DEVLINK_PARAM_GENERIC_ID_RESET_DEV_ON_DRV_PROBE,
DEVLINK_PARAM_GENERIC_ID_ENABLE_ROCE,
+ DEVLINK_PARAM_GENERIC_ID_ENABLE_REMOTE_DEV_RESET,
/* add new param generic ids above here*/
__DEVLINK_PARAM_GENERIC_ID_MAX,
@@ -457,6 +458,9 @@ enum devlink_param_generic_id {
#define DEVLINK_PARAM_GENERIC_ENABLE_ROCE_NAME "enable_roce"
#define DEVLINK_PARAM_GENERIC_ENABLE_ROCE_TYPE DEVLINK_PARAM_TYPE_BOOL
+#define DEVLINK_PARAM_GENERIC_ENABLE_REMOTE_DEV_RESET_NAME "enable_remote_dev_reset"
+#define DEVLINK_PARAM_GENERIC_ENABLE_REMOTE_DEV_RESET_TYPE DEVLINK_PARAM_TYPE_BOOL
+
#define DEVLINK_PARAM_GENERIC(_id, _cmodes, _get, _set, _validate) \
{ \
.id = DEVLINK_PARAM_GENERIC_ID_##_id, \
diff --git a/net/core/devlink.c b/net/core/devlink.c
index f1812fc620d4..4d7b0f2a6f7b 100644
--- a/net/core/devlink.c
+++ b/net/core/devlink.c
@@ -3230,6 +3230,11 @@ static const struct devlink_param devlink_param_generic[] = {
.name = DEVLINK_PARAM_GENERIC_ENABLE_ROCE_NAME,
.type = DEVLINK_PARAM_GENERIC_ENABLE_ROCE_TYPE,
},
+ {
+ .id = DEVLINK_PARAM_GENERIC_ID_ENABLE_REMOTE_DEV_RESET,
+ .name = DEVLINK_PARAM_GENERIC_ENABLE_REMOTE_DEV_RESET_NAME,
+ .type = DEVLINK_PARAM_GENERIC_ENABLE_REMOTE_DEV_RESET_TYPE,
+ },
};
static int devlink_param_generic_verify(const struct devlink_param *param)
--
2.17.1
next prev parent reply other threads:[~2020-07-27 11:07 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-27 11:02 [PATCH net-next RFC 00/13] Add devlink reload level option Moshe Shemesh
2020-07-27 11:02 ` [PATCH net-next RFC 01/13] devlink: Add reload level option to devlink reload command Moshe Shemesh
2020-07-28 0:58 ` Jakub Kicinski
2020-07-28 13:58 ` Jiri Pirko
2020-07-28 16:47 ` Jacob Keller
2020-07-28 18:44 ` Jakub Kicinski
2020-07-28 19:18 ` Jacob Keller
2020-07-28 20:06 ` Jakub Kicinski
2020-07-29 14:54 ` Moshe Shemesh
2020-07-29 21:07 ` Jakub Kicinski
2020-07-30 12:30 ` Moshe Shemesh
2020-07-30 23:11 ` Jakub Kicinski
2020-08-01 21:32 ` Moshe Shemesh
2020-08-03 14:14 ` Jiri Pirko
2020-08-03 20:57 ` Jakub Kicinski
2020-08-04 10:04 ` Jiri Pirko
2020-08-04 20:39 ` Jakub Kicinski
2020-08-05 11:02 ` Jiri Pirko
2020-08-06 18:25 ` Jakub Kicinski
2020-08-06 22:56 ` Jacob Keller
2020-08-09 13:21 ` Moshe Shemesh
2020-08-10 16:53 ` Jakub Kicinski
2020-08-10 17:09 ` Jacob Keller
2020-08-10 18:17 ` Jakub Kicinski
2020-08-11 5:46 ` Jiri Pirko
2020-07-27 11:02 ` [PATCH net-next RFC 02/13] devlink: Add reload levels data to dev get Moshe Shemesh
2020-07-28 0:58 ` Jakub Kicinski
2020-07-29 14:37 ` Moshe Shemesh
2020-07-29 21:11 ` Jakub Kicinski
2020-07-30 12:05 ` Moshe Shemesh
2020-07-27 11:02 ` [PATCH net-next RFC 03/13] net/mlx5: Add functions to set/query MFRL register Moshe Shemesh
2020-07-27 11:02 ` [PATCH net-next RFC 04/13] net/mlx5: Set cap for pci sync for fw update event Moshe Shemesh
2020-07-27 11:02 ` [PATCH net-next RFC 05/13] net/mlx5: Handle sync reset request event Moshe Shemesh
2020-07-27 11:02 ` [PATCH net-next RFC 06/13] net/mlx5: Handle sync reset now event Moshe Shemesh
2020-07-27 11:02 ` [PATCH net-next RFC 07/13] net/mlx5: Handle sync reset abort event Moshe Shemesh
2020-07-27 11:02 ` [PATCH net-next RFC 08/13] net/mlx5: Add support for devlink reload level fw reset Moshe Shemesh
2020-07-27 11:02 ` Moshe Shemesh [this message]
2020-07-28 0:59 ` [PATCH net-next RFC 09/13] devlink: Add enable_remote_dev_reset generic parameter Jakub Kicinski
2020-07-29 14:42 ` Moshe Shemesh
2020-07-29 20:57 ` Jakub Kicinski
2020-07-30 12:08 ` Moshe Shemesh
2020-07-27 11:02 ` [PATCH net-next RFC 10/13] net/mlx5: Add devlink param enable_remote_dev_reset support Moshe Shemesh
2020-07-28 0:59 ` Jakub Kicinski
2020-07-27 11:02 ` [PATCH net-next RFC 11/13] net/mlx5: Add support for fw live patch event Moshe Shemesh
2020-07-27 11:02 ` [PATCH net-next RFC 12/13] net/mlx5: Add support for devlink reload level live patch Moshe Shemesh
2020-07-27 11:02 ` [PATCH net-next RFC 13/13] devlink: Add Documentation/networking/devlink/devlink-reload.rst Moshe Shemesh
2020-07-28 5:25 ` [PATCH net-next RFC 00/13] Add devlink reload level option Vasundhara Volam
2020-07-28 16:43 ` Jacob Keller
2020-08-03 10:24 ` Vasundhara Volam
2020-08-03 12:17 ` Moshe Shemesh
2020-08-03 12:47 ` Vasundhara Volam
2020-08-03 13:52 ` Moshe Shemesh
2020-08-04 10:13 ` Vasundhara Volam
2020-08-05 6:32 ` Moshe Shemesh
2020-08-05 6:55 ` Vasundhara Volam
2020-08-05 8:20 ` Moshe Shemesh
2020-08-12 9:34 ` Vasundhara Volam
2020-07-28 16:37 ` Jacob Keller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1595847753-2234-10-git-send-email-moshe@mellanox.com \
--to=moshe@mellanox.com \
--cc=davem@davemloft.net \
--cc=jiri@mellanox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vasundhara-v.volam@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).