From: Willy Liu <willy.liu@realtek.com>
To: <andrew@lunn.ch>
Cc: <hkallweit1@gmail.com>, <linux@armlinux.org.uk>,
<davem@davemloft.net>, <kuba@kernel.org>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<ryankao@realtek.com>, Willy Liu <willy.liu@realtek.com>
Subject: [PATCH net v1] net: phy: realtek: Modify 2.5G PHY name to RTL8226
Date: Wed, 30 Sep 2020 14:48:58 +0800 [thread overview]
Message-ID: <1601448538-18004-1-git-send-email-willy.liu@realtek.com> (raw)
Realtek single-chip Ethernet PHY solutions can be separated as below:
10M/100Mbps: RTL8201X
1Gbps: RTL8211X
2.5Gbps: RTL8226/RTL8221X
RTL8226 is the first version for realtek that compatible 2.5Gbps single PHY.
Since RTL8226 is single port only, realtek changes its name to RTL8221B from
the second version.
PHY ID for RTL8226 is 0x001cc800 and RTL8226B/RTL8221B is 0x001cc840.
RTL8125 is not a single PHY solution, it integrates PHY/MAC/PCIE bus
controller and embedded memory.
Signed-off-by: Willy Liu <willy.liu@realtek.com>
---
drivers/net/phy/realtek.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 0f09609..f207607 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -401,7 +401,7 @@ static int rtlgen_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
return ret;
}
-static int rtl8125_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
+static int rtl822x_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
{
int ret = rtlgen_read_mmd(phydev, devnum, regnum);
@@ -425,7 +425,7 @@ static int rtl8125_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
return ret;
}
-static int rtl8125_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
+static int rtl822x_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
u16 val)
{
int ret = rtlgen_write_mmd(phydev, devnum, regnum, val);
@@ -442,7 +442,7 @@ static int rtl8125_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
return ret;
}
-static int rtl8125_get_features(struct phy_device *phydev)
+static int rtl822x_get_features(struct phy_device *phydev)
{
int val;
@@ -460,7 +460,7 @@ static int rtl8125_get_features(struct phy_device *phydev)
return genphy_read_abilities(phydev);
}
-static int rtl8125_config_aneg(struct phy_device *phydev)
+static int rtl822x_config_aneg(struct phy_device *phydev)
{
int ret = 0;
@@ -480,7 +480,7 @@ static int rtl8125_config_aneg(struct phy_device *phydev)
return __genphy_config_aneg(phydev, ret);
}
-static int rtl8125_read_status(struct phy_device *phydev)
+static int rtl822x_read_status(struct phy_device *phydev)
{
int ret;
@@ -522,7 +522,7 @@ static int rtlgen_match_phy_device(struct phy_device *phydev)
!rtlgen_supports_2_5gbps(phydev);
}
-static int rtl8125_match_phy_device(struct phy_device *phydev)
+static int rtl8226_match_phy_device(struct phy_device *phydev)
{
return phydev->phy_id == RTL_GENERIC_PHYID &&
rtlgen_supports_2_5gbps(phydev);
@@ -627,29 +627,29 @@ static int rtlgen_resume(struct phy_device *phydev)
.read_mmd = rtlgen_read_mmd,
.write_mmd = rtlgen_write_mmd,
}, {
- .name = "RTL8125 2.5Gbps internal",
- .match_phy_device = rtl8125_match_phy_device,
- .get_features = rtl8125_get_features,
- .config_aneg = rtl8125_config_aneg,
- .read_status = rtl8125_read_status,
+ .name = "RTL8226 2.5Gbps PHY",
+ .match_phy_device = rtl8226_match_phy_device,
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
- .read_mmd = rtl8125_read_mmd,
- .write_mmd = rtl8125_write_mmd,
+ .read_mmd = rtl822x_read_mmd,
+ .write_mmd = rtl822x_write_mmd,
}, {
PHY_ID_MATCH_EXACT(0x001cc840),
- .name = "RTL8125B 2.5Gbps internal",
- .get_features = rtl8125_get_features,
- .config_aneg = rtl8125_config_aneg,
- .read_status = rtl8125_read_status,
+ .name = "RTL8226B_RTL8221B 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
- .read_mmd = rtl8125_read_mmd,
- .write_mmd = rtl8125_write_mmd,
+ .read_mmd = rtl822x_read_mmd,
+ .write_mmd = rtl822x_write_mmd,
}, {
PHY_ID_MATCH_EXACT(0x001cc961),
.name = "RTL8366RB Gigabit Ethernet",
--
1.9.1
next reply other threads:[~2020-09-30 6:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-30 6:48 Willy Liu [this message]
2020-10-02 1:50 ` [PATCH net v1] net: phy: realtek: Modify 2.5G PHY name to RTL8226 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1601448538-18004-1-git-send-email-willy.liu@realtek.com \
--to=willy.liu@realtek.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=ryankao@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).