From: Peng Li <lipeng321@huawei.com>
To: <davem@davemloft.net>, <kuba@kernel.org>, <xie.he.0141@gmail.com>,
<ms@dev.tdt.de>, <willemb@google.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<huangguangbin2@huawei.com>
Subject: [PATCH net-next 4/6] net: pci200syn: add some required spaces
Date: Tue, 15 Jun 2021 21:54:21 +0800 [thread overview]
Message-ID: <1623765263-36775-5-git-send-email-lipeng321@huawei.com> (raw)
In-Reply-To: <1623765263-36775-1-git-send-email-lipeng321@huawei.com>
Add spaces required after that close brace '}'.
Add spaces required before the open parenthesis '('.
Add spaces required after that ','.
Signed-off-by: Peng Li <lipeng321@huawei.com>
---
drivers/net/wan/pci200syn.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index cee3d65..ac4a599 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -56,7 +56,7 @@ typedef struct {
u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */
u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */
u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */
-}plx9052;
+} plx9052;
typedef struct port_s {
struct napi_struct napi;
@@ -72,7 +72,7 @@ typedef struct port_s {
u16 txlast;
u8 rxs, txs, tmc; /* SCA registers */
u8 chan; /* physical port # - 0 or 1 */
-}port_t;
+} port_t;
typedef struct card_s {
u8 __iomem *rambase; /* buffer memory base (virtual) */
@@ -84,7 +84,7 @@ typedef struct card_s {
u8 irq; /* interrupt request level */
port_t ports[2];
-}card_t;
+} card_t;
#define get_port(card, port) (&card->ports[port])
#define sca_flush(card) (sca_in(IER0, card))
@@ -117,7 +117,7 @@ static void pci200_set_iface(port_t *port)
sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
port->card);
- switch(port->settings.clock_type) {
+ switch (port->settings.clock_type) {
case CLOCK_INT:
rxs |= CLK_BRG; /* BRG output */
txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
@@ -184,7 +184,7 @@ static int pci200_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
if (cmd != SIOCWANDEV)
return hdlc_ioctl(dev, ifr, cmd);
- switch(ifr->ifr_settings.type) {
+ switch (ifr->ifr_settings.type) {
case IF_GET_IFACE:
ifr->ifr_settings.type = IF_IFACE_V35;
if (ifr->ifr_settings.size < size) {
@@ -301,13 +301,13 @@ static int pci200_pci_init_one(struct pci_dev *pdev,
return -EFAULT;
}
- plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK;
+ plxphys = pci_resource_start(pdev, 0) & PCI_BASE_ADDRESS_MEM_MASK;
card->plxbase = ioremap(plxphys, PCI200SYN_PLX_SIZE);
- scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK;
+ scaphys = pci_resource_start(pdev, 2) & PCI_BASE_ADDRESS_MEM_MASK;
card->scabase = ioremap(scaphys, PCI200SYN_SCA_SIZE);
- ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
+ ramphys = pci_resource_start(pdev, 3) & PCI_BASE_ADDRESS_MEM_MASK;
card->rambase = pci_ioremap_bar(pdev, 3);
if (!card->plxbase || !card->scabase || !card->rambase) {
--
2.8.1
next prev parent reply other threads:[~2021-06-15 13:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-15 13:54 [PATCH net-next 0/6] net: pci200syn: clean up some code style issues Peng Li
2021-06-15 13:54 ` [PATCH net-next 1/6] net: pci200syn: remove redundant blank lines Peng Li
2021-06-15 13:54 ` [PATCH net-next 2/6] net: pci200syn: add blank line after declarations Peng Li
2021-06-15 13:54 ` [PATCH net-next 3/6] net: pci200syn: replace comparison to NULL with "!card" Peng Li
2021-06-15 13:54 ` Peng Li [this message]
2021-06-15 13:54 ` [PATCH net-next 5/6] net: pci200syn: add necessary () to macro argument Peng Li
2021-06-15 13:54 ` [PATCH net-next 6/6] net: pci200syn: fix the comments style issue Peng Li
2021-06-15 18:20 ` [PATCH net-next 0/6] net: pci200syn: clean up some code style issues patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1623765263-36775-5-git-send-email-lipeng321@huawei.com \
--to=lipeng321@huawei.com \
--cc=davem@davemloft.net \
--cc=huangguangbin2@huawei.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ms@dev.tdt.de \
--cc=netdev@vger.kernel.org \
--cc=willemb@google.com \
--cc=xie.he.0141@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).