netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jesper Dangaard Brouer <brouer@redhat.com>
To: bpf@vger.kernel.org
Cc: Jesper Dangaard Brouer <brouer@redhat.com>,
	netdev@vger.kernel.org, Stanislav Fomichev <sdf@google.com>,
	martin.lau@kernel.org, ast@kernel.org, daniel@iogearbox.net,
	alexandr.lobakin@intel.com, larysa.zaremba@intel.com,
	xdp-hints@xdp-project.net, anthony.l.nguyen@intel.com,
	yoong.siang.song@intel.com, boon.leong.ong@intel.com,
	intel-wired-lan@lists.osuosl.org, pabeni@redhat.com,
	jesse.brandeburg@intel.com, kuba@kernel.org, edumazet@google.com,
	john.fastabend@gmail.com, hawk@kernel.org, davem@davemloft.net
Subject: [PATCH bpf-next V2 1/6] igc: enable and fix RX hash usage by netstack
Date: Tue, 21 Mar 2023 14:47:06 +0100	[thread overview]
Message-ID: <167940642654.2718137.17525286673186723091.stgit@firesoul> (raw)
In-Reply-To: <167940634187.2718137.10209374282891218398.stgit@firesoul>

When function igc_rx_hash() was introduced in v4.20 via commit 0507ef8a0372
("igc: Add transmit and receive fastpath and interrupt handlers"), the
hardware wasn't configured to provide RSS hash, thus it made sense to not
enable net_device NETIF_F_RXHASH feature bit.

The NIC hardware was configured to enable RSS hash info in v5.2 via commit
2121c2712f82 ("igc: Add multiple receive queues control supporting"), but
forgot to set the NETIF_F_RXHASH feature bit.

The original implementation of igc_rx_hash() didn't extract the associated
pkt_hash_type, but statically set PKT_HASH_TYPE_L3. The largest portions of
this patch are about extracting the RSS Type from the hardware and mapping
this to enum pkt_hash_types. This was based on Foxville i225 software user
manual rev-1.3.1 and tested on Intel Ethernet Controller I225-LM (rev 03).

For UDP it's worth noting that RSS (type) hashing have been disabled both for
IPv4 and IPv6 (see IGC_MRQC_RSS_FIELD_IPV4_UDP + IGC_MRQC_RSS_FIELD_IPV6_UDP)
because hardware RSS doesn't handle fragmented pkts well when enabled (can
cause out-of-order). This results in PKT_HASH_TYPE_L3 for UDP packets, and
hash value doesn't include UDP port numbers. Not being PKT_HASH_TYPE_L4, have
the effect that netstack will do a software based hash calc calling into
flow_dissect, but only when code calls skb_get_hash(), which doesn't
necessary happen for local delivery.

Fixes: 2121c2712f82 ("igc: Add multiple receive queues control supporting")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
---
 drivers/net/ethernet/intel/igc/igc.h      |   28 ++++++++++++++++++++++++++
 drivers/net/ethernet/intel/igc/igc_main.c |   31 +++++++++++++++++++++++++----
 2 files changed, 55 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index df3e26c0cf01..f83cbc4a1afa 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -13,6 +13,7 @@
 #include <linux/ptp_clock_kernel.h>
 #include <linux/timecounter.h>
 #include <linux/net_tstamp.h>
+#include <linux/bitfield.h>
 
 #include "igc_hw.h"
 
@@ -311,6 +312,33 @@ extern char igc_driver_name[];
 #define IGC_MRQC_RSS_FIELD_IPV4_UDP	0x00400000
 #define IGC_MRQC_RSS_FIELD_IPV6_UDP	0x00800000
 
+/* RX-desc Write-Back format RSS Type's */
+enum igc_rss_type_num {
+	IGC_RSS_TYPE_NO_HASH		= 0,
+	IGC_RSS_TYPE_HASH_TCP_IPV4	= 1,
+	IGC_RSS_TYPE_HASH_IPV4		= 2,
+	IGC_RSS_TYPE_HASH_TCP_IPV6	= 3,
+	IGC_RSS_TYPE_HASH_IPV6_EX	= 4,
+	IGC_RSS_TYPE_HASH_IPV6		= 5,
+	IGC_RSS_TYPE_HASH_TCP_IPV6_EX	= 6,
+	IGC_RSS_TYPE_HASH_UDP_IPV4	= 7,
+	IGC_RSS_TYPE_HASH_UDP_IPV6	= 8,
+	IGC_RSS_TYPE_HASH_UDP_IPV6_EX	= 9,
+	IGC_RSS_TYPE_MAX		= 10,
+};
+#define IGC_RSS_TYPE_MAX_TABLE		16
+#define IGC_RSS_TYPE_MASK		GENMASK(3,0) /* 4-bits (3:0) = mask 0x0F */
+
+/* igc_rss_type - Rx descriptor RSS type field */
+static inline u32 igc_rss_type(const union igc_adv_rx_desc *rx_desc)
+{
+	/* RSS Type 4-bits (3:0) number: 0-9 (above 9 is reserved)
+	 * Accessing the same bits via u16 (wb.lower.lo_dword.hs_rss.pkt_info)
+	 * is slightly slower than via u32 (wb.lower.lo_dword.data)
+	 */
+	return le32_get_bits(rx_desc->wb.lower.lo_dword.data, IGC_RSS_TYPE_MASK);
+}
+
 /* Interrupt defines */
 #define IGC_START_ITR			648 /* ~6000 ints/sec */
 #define IGC_4K_ITR			980
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 2928a6c73692..f6a54feec011 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -1677,14 +1677,36 @@ static void igc_rx_checksum(struct igc_ring *ring,
 		   le32_to_cpu(rx_desc->wb.upper.status_error));
 }
 
+/* Mapping HW RSS Type to enum pkt_hash_types */
+enum pkt_hash_types igc_rss_type_table[IGC_RSS_TYPE_MAX_TABLE] = {
+	[IGC_RSS_TYPE_NO_HASH]		= PKT_HASH_TYPE_L2,
+	[IGC_RSS_TYPE_HASH_TCP_IPV4]	= PKT_HASH_TYPE_L4,
+	[IGC_RSS_TYPE_HASH_IPV4]	= PKT_HASH_TYPE_L3,
+	[IGC_RSS_TYPE_HASH_TCP_IPV6]	= PKT_HASH_TYPE_L4,
+	[IGC_RSS_TYPE_HASH_IPV6_EX]	= PKT_HASH_TYPE_L3,
+	[IGC_RSS_TYPE_HASH_IPV6]	= PKT_HASH_TYPE_L3,
+	[IGC_RSS_TYPE_HASH_TCP_IPV6_EX] = PKT_HASH_TYPE_L4,
+	[IGC_RSS_TYPE_HASH_UDP_IPV4]	= PKT_HASH_TYPE_L4,
+	[IGC_RSS_TYPE_HASH_UDP_IPV6]	= PKT_HASH_TYPE_L4,
+	[IGC_RSS_TYPE_HASH_UDP_IPV6_EX] = PKT_HASH_TYPE_L4,
+	[10] = PKT_HASH_TYPE_NONE, /* RSS Type above 9 "Reserved" by HW  */
+	[11] = PKT_HASH_TYPE_NONE, /* keep array sized for SW bit-mask   */
+	[12] = PKT_HASH_TYPE_NONE, /* to handle future HW revisons       */
+	[13] = PKT_HASH_TYPE_NONE,
+	[14] = PKT_HASH_TYPE_NONE,
+	[15] = PKT_HASH_TYPE_NONE,
+};
+
 static inline void igc_rx_hash(struct igc_ring *ring,
 			       union igc_adv_rx_desc *rx_desc,
 			       struct sk_buff *skb)
 {
-	if (ring->netdev->features & NETIF_F_RXHASH)
-		skb_set_hash(skb,
-			     le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
-			     PKT_HASH_TYPE_L3);
+	if (ring->netdev->features & NETIF_F_RXHASH) {
+		u32 rss_hash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+		u32 rss_type = igc_rss_type(rx_desc);
+
+		skb_set_hash(skb, rss_hash, igc_rss_type_table[rss_type]);
+	}
 }
 
 static void igc_rx_vlan(struct igc_ring *rx_ring,
@@ -6543,6 +6565,7 @@ static int igc_probe(struct pci_dev *pdev,
 	netdev->features |= NETIF_F_TSO;
 	netdev->features |= NETIF_F_TSO6;
 	netdev->features |= NETIF_F_TSO_ECN;
+	netdev->features |= NETIF_F_RXHASH;
 	netdev->features |= NETIF_F_RXCSUM;
 	netdev->features |= NETIF_F_HW_CSUM;
 	netdev->features |= NETIF_F_SCTP_CRC;



  reply	other threads:[~2023-03-21 13:48 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-21 13:47 [PATCH bpf-next V2 0/6] XDP-hints kfuncs for Intel driver igc Jesper Dangaard Brouer
2023-03-21 13:47 ` Jesper Dangaard Brouer [this message]
2023-03-21 13:47 ` [PATCH bpf-next V2 2/6] selftests/bpf: xdp_hw_metadata track more timestamps Jesper Dangaard Brouer
2023-03-21 13:47 ` [PATCH bpf-next V2 3/6] selftests/bpf: xdp_hw_metadata RX hash return code info Jesper Dangaard Brouer
2023-03-21 18:47   ` Stanislav Fomichev
2023-03-22 16:05     ` Jesper Dangaard Brouer
2023-03-22 16:07       ` Alexei Starovoitov
2023-03-22 19:00         ` Stanislav Fomichev
2023-03-22 19:17           ` Alexei Starovoitov
2023-03-22 19:22             ` Stanislav Fomichev
2023-03-22 19:30               ` Alexei Starovoitov
2023-03-22 19:33                 ` Stanislav Fomichev
2023-03-23  8:51                   ` Jesper Dangaard Brouer
2023-03-23 17:35                     ` Alexei Starovoitov
2023-03-23 17:47                       ` Stanislav Fomichev
2023-03-24 12:14                         ` Jesper Dangaard Brouer
2023-03-24 19:40                           ` Stanislav Fomichev
2023-03-21 13:47 ` [PATCH bpf-next V2 4/6] igc: add igc_xdp_buff wrapper for xdp_buff in driver Jesper Dangaard Brouer
2023-03-21 13:47 ` [PATCH bpf-next V2 5/6] igc: add XDP hints kfuncs for RX timestamp Jesper Dangaard Brouer
2023-03-21 13:47 ` [PATCH bpf-next V2 6/6] igc: add XDP hints kfuncs for RX hash Jesper Dangaard Brouer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=167940642654.2718137.17525286673186723091.stgit@firesoul \
    --to=brouer@redhat.com \
    --cc=alexandr.lobakin@intel.com \
    --cc=anthony.l.nguyen@intel.com \
    --cc=ast@kernel.org \
    --cc=boon.leong.ong@intel.com \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hawk@kernel.org \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jesse.brandeburg@intel.com \
    --cc=john.fastabend@gmail.com \
    --cc=kuba@kernel.org \
    --cc=larysa.zaremba@intel.com \
    --cc=martin.lau@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sdf@google.com \
    --cc=xdp-hints@xdp-project.net \
    --cc=yoong.siang.song@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).