Re: [PATCH v2] net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset

[Heiner Kallweit <hkallweit1@gmail.com>]

On 14.01.2020 17:45, Michael Grzeschik wrote:
> According to the Datasheet this bit should be 0 (Normal operation) in
> default. With the FORCE_LINK_GOOD bit set, it is not possible to get a
> link. This patch sets FORCE_LINK_GOOD to the default value after
> resetting the phy.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
> v1 -> v2: - fixed typo in subject line
>           - used phy_modify instead of read/write
> 
>  drivers/net/phy/dp83867.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
> index adda0d0eab800..68855177d92cc 100644
> --- a/drivers/net/phy/dp83867.c
> +++ b/drivers/net/phy/dp83867.c
> @@ -99,6 +99,7 @@
>  #define DP83867_PHYCR_TX_FIFO_DEPTH_MASK	GENMASK(15, 14)
>  #define DP83867_PHYCR_RX_FIFO_DEPTH_MASK	GENMASK(13, 12)
>  #define DP83867_PHYCR_RESERVED_MASK		BIT(11)
> +#define DP83867_PHYCR_FORCE_LINK_GOOD		BIT(10)
>  
>  /* RGMIIDCTL bits */
>  #define DP83867_RGMII_TX_CLK_DELAY_MAX		0xf
> @@ -635,6 +636,15 @@ static int dp83867_phy_reset(struct phy_device *phydev)
>  
>  	usleep_range(10, 20);
>  
> +	/* After reset FORCE_LINK_GOOD bit is set. Although the
> +	 * default value should be unset. Disable FORCE_LINK_GOOD
> +	 * for the phy to work properly.
> +	 */
> +	err = phy_modify(phydev, MII_DP83867_PHYCTRL,
> +			 DP83867_PHYCR_FORCE_LINK_GOOD, 0);
> +	if (err < 0)
> +		return err;
> +
>  	return 0;

You can simply do "return phy_modify();" here.

>  }
>  
>