Netdev Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH iproute2-next v2 0/4] Add devlink-trap support
@ 2019-08-13  8:31 Ido Schimmel
  2019-08-13  8:31 ` [PATCH iproute2-next v2 1/4] devlink: Increase number of supported options Ido Schimmel
                   ` (4 more replies)
  0 siblings, 5 replies; 11+ messages in thread
From: Ido Schimmel @ 2019-08-13  8:31 UTC (permalink / raw)
  To: netdev; +Cc: dsahern, stephen, jiri, mlxsw, Ido Schimmel

From: Ido Schimmel <idosch@mellanox.com>

This patchset adds devlink-trap support in iproute2.

Patch #1 increases the number of options devlink can handle.

Patches #2-#3 gradually add support for all devlink-trap commands.

Patch #4 adds a man page for devlink-trap.

See individual commit messages for example usage and output.

Changes in v2:
* Remove report option and monitor command since monitoring is done
  using drop monitor

Ido Schimmel (4):
  devlink: Increase number of supported options
  devlink: Add devlink trap set and show commands
  devlink: Add devlink trap group set and show commands
  devlink: Add man page for devlink-trap

 devlink/devlink.c          | 448 +++++++++++++++++++++++++++++++++++--
 man/man8/devlink-monitor.8 |   3 +-
 man/man8/devlink-trap.8    | 138 ++++++++++++
 man/man8/devlink.8         |  11 +-
 4 files changed, 581 insertions(+), 19 deletions(-)
 create mode 100644 man/man8/devlink-trap.8

-- 
2.21.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH iproute2-next v2 1/4] devlink: Increase number of supported options
  2019-08-13  8:31 [PATCH iproute2-next v2 0/4] Add devlink-trap support Ido Schimmel
@ 2019-08-13  8:31 ` Ido Schimmel
  2019-08-13  8:31 ` [PATCH iproute2-next v2 2/4] devlink: Add devlink trap set and show commands Ido Schimmel
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 11+ messages in thread
From: Ido Schimmel @ 2019-08-13  8:31 UTC (permalink / raw)
  To: netdev; +Cc: dsahern, stephen, jiri, mlxsw, Ido Schimmel

From: Ido Schimmel <idosch@mellanox.com>

Currently, the number of supported options is capped at 32 which is a
problem given we are about to add a few more and go over the limit.

Increase the limit to 64 options.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
---
 devlink/devlink.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/devlink/devlink.c b/devlink/devlink.c
index 91c85dc1de73..4ed240e251f5 100644
--- a/devlink/devlink.c
+++ b/devlink/devlink.c
@@ -235,7 +235,7 @@ static void ifname_map_free(struct ifname_map *ifname_map)
 #define DL_OPT_HEALTH_REPORTER_AUTO_RECOVER	BIT(28)
 
 struct dl_opts {
-	uint32_t present; /* flags of present items */
+	uint64_t present; /* flags of present items */
 	char *bus_name;
 	char *dev_name;
 	uint32_t port_index;
@@ -735,7 +735,7 @@ static int dl_argv_handle_port(struct dl *dl, char **p_bus_name,
 
 static int dl_argv_handle_both(struct dl *dl, char **p_bus_name,
 			       char **p_dev_name, uint32_t *p_port_index,
-			       uint32_t *p_handle_bit)
+			       uint64_t *p_handle_bit)
 {
 	char *str = dl_argv_next(dl);
 	unsigned int slash_count;
@@ -1015,7 +1015,7 @@ static int param_cmode_get(const char *cmodestr,
 }
 
 struct dl_args_metadata {
-	uint32_t o_flag;
+	uint64_t o_flag;
 	char err_msg[DL_ARGS_REQUIRED_MAX_ERR_LEN];
 };
 
@@ -1042,10 +1042,10 @@ static const struct dl_args_metadata dl_args_required[] = {
 	{DL_OPT_HEALTH_REPORTER_NAME, "Reporter's name is expected."},
 };
 
-static int dl_args_finding_required_validate(uint32_t o_required,
-					     uint32_t o_found)
+static int dl_args_finding_required_validate(uint64_t o_required,
+					     uint64_t o_found)
 {
-	uint32_t o_flag;
+	uint64_t o_flag;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(dl_args_required); i++) {
@@ -1058,16 +1058,16 @@ static int dl_args_finding_required_validate(uint32_t o_required,
 	return 0;
 }
 
-static int dl_argv_parse(struct dl *dl, uint32_t o_required,
-			 uint32_t o_optional)
+static int dl_argv_parse(struct dl *dl, uint64_t o_required,
+			 uint64_t o_optional)
 {
 	struct dl_opts *opts = &dl->opts;
-	uint32_t o_all = o_required | o_optional;
-	uint32_t o_found = 0;
+	uint64_t o_all = o_required | o_optional;
+	uint64_t o_found = 0;
 	int err;
 
 	if (o_required & DL_OPT_HANDLE && o_required & DL_OPT_HANDLEP) {
-		uint32_t handle_bit;
+		uint64_t handle_bit;
 
 		err = dl_argv_handle_both(dl, &opts->bus_name, &opts->dev_name,
 					  &opts->port_index, &handle_bit);
@@ -1446,7 +1446,7 @@ static void dl_opts_put(struct nlmsghdr *nlh, struct dl *dl)
 }
 
 static int dl_argv_parse_put(struct nlmsghdr *nlh, struct dl *dl,
-			     uint32_t o_required, uint32_t o_optional)
+			     uint64_t o_required, uint64_t o_optional)
 {
 	int err;
 
-- 
2.21.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH iproute2-next v2 2/4] devlink: Add devlink trap set and show commands
  2019-08-13  8:31 [PATCH iproute2-next v2 0/4] Add devlink-trap support Ido Schimmel
  2019-08-13  8:31 ` [PATCH iproute2-next v2 1/4] devlink: Increase number of supported options Ido Schimmel
@ 2019-08-13  8:31 ` Ido Schimmel
  2019-08-13  8:44   ` Jiri Pirko
  2019-08-13  8:31 ` [PATCH iproute2-next v2 3/4] devlink: Add devlink trap group " Ido Schimmel
                   ` (2 subsequent siblings)
  4 siblings, 1 reply; 11+ messages in thread
From: Ido Schimmel @ 2019-08-13  8:31 UTC (permalink / raw)
  To: netdev; +Cc: dsahern, stephen, jiri, mlxsw, Ido Schimmel

From: Ido Schimmel <idosch@mellanox.com>

The trap set command allows the user to set the action of an individual
trap. Example:

# devlink trap set netdevsim/netdevsim10 trap blackhole_route action trap

The trap show command allows the user to get the current status of an
individual trap or a dump of all traps in case one is not specified.
When '-s' is specified the trap's statistics are shown. When '-v' is
specified the metadata types the trap can provide are shown. Example:

# devlink -jvps trap show netdevsim/netdevsim10 trap blackhole_route
{
    "trap": {
        "netdevsim/netdevsim10": [ {
                "name": "blackhole_route",
                "type": "drop",
                "generic": true,
                "action": "trap",
                "group": "l3_drops",
                "metadata": [ "input_port" ],
                "stats": {
                    "rx": {
                        "bytes": 0,
                        "packets": 0
                    }
                }
            } ]
    }
}

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
 devlink/devlink.c | 293 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 288 insertions(+), 5 deletions(-)

diff --git a/devlink/devlink.c b/devlink/devlink.c
index 4ed240e251f5..81fff4429841 100644
--- a/devlink/devlink.c
+++ b/devlink/devlink.c
@@ -233,6 +233,8 @@ static void ifname_map_free(struct ifname_map *ifname_map)
 #define DL_OPT_HEALTH_REPORTER_NAME	BIT(27)
 #define DL_OPT_HEALTH_REPORTER_GRACEFUL_PERIOD	BIT(27)
 #define DL_OPT_HEALTH_REPORTER_AUTO_RECOVER	BIT(28)
+#define DL_OPT_TRAP_NAME		BIT(29)
+#define DL_OPT_TRAP_ACTION		BIT(30)
 
 struct dl_opts {
 	uint64_t present; /* flags of present items */
@@ -269,6 +271,8 @@ struct dl_opts {
 	const char *reporter_name;
 	uint64_t reporter_graceful_period;
 	bool reporter_auto_recover;
+	const char *trap_name;
+	enum devlink_trap_action trap_action;
 };
 
 struct dl {
@@ -282,6 +286,7 @@ struct dl {
 	bool json_output;
 	bool pretty_output;
 	bool verbose;
+	bool stats;
 	struct {
 		bool present;
 		char *bus_name;
@@ -436,6 +441,19 @@ static const enum mnl_attr_data_type devlink_policy[DEVLINK_ATTR_MAX + 1] = {
 	[DEVLINK_ATTR_HEALTH_REPORTER_RECOVER_COUNT] = MNL_TYPE_U64,
 	[DEVLINK_ATTR_HEALTH_REPORTER_DUMP_TS] = MNL_TYPE_U64,
 	[DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD] = MNL_TYPE_U64,
+	[DEVLINK_ATTR_STATS] = MNL_TYPE_NESTED,
+	[DEVLINK_ATTR_TRAP_NAME] = MNL_TYPE_STRING,
+	[DEVLINK_ATTR_TRAP_ACTION] = MNL_TYPE_U8,
+	[DEVLINK_ATTR_TRAP_TYPE] = MNL_TYPE_U8,
+	[DEVLINK_ATTR_TRAP_GENERIC] = MNL_TYPE_FLAG,
+	[DEVLINK_ATTR_TRAP_METADATA] = MNL_TYPE_NESTED,
+	[DEVLINK_ATTR_TRAP_GROUP_NAME] = MNL_TYPE_STRING,
+};
+
+static const enum mnl_attr_data_type
+devlink_stats_policy[DEVLINK_ATTR_STATS_MAX + 1] = {
+	[DEVLINK_ATTR_STATS_RX_PACKETS] = MNL_TYPE_U64,
+	[DEVLINK_ATTR_STATS_RX_BYTES] = MNL_TYPE_U64,
 };
 
 static int attr_cb(const struct nlattr *attr, void *data)
@@ -454,6 +472,25 @@ static int attr_cb(const struct nlattr *attr, void *data)
 	return MNL_CB_OK;
 }
 
+static int attr_stats_cb(const struct nlattr *attr, void *data)
+{
+	const struct nlattr **tb = data;
+	int type;
+
+	/* Allow the tool to work on top of newer kernels that might contain
+	 * more attributes.
+	 */
+	if (mnl_attr_type_valid(attr, DEVLINK_ATTR_STATS_MAX) < 0)
+		return MNL_CB_OK;
+
+	type = mnl_attr_get_type(attr);
+	if (mnl_attr_validate(attr, devlink_stats_policy[type]) < 0)
+		return MNL_CB_ERROR;
+
+	tb[type] = attr;
+	return MNL_CB_OK;
+}
+
 static int ifname_map_cb(const struct nlmsghdr *nlh, void *data)
 {
 	struct nlattr *tb[DEVLINK_ATTR_MAX + 1] = {};
@@ -1014,6 +1051,20 @@ static int param_cmode_get(const char *cmodestr,
 	return 0;
 }
 
+static int trap_action_get(const char *actionstr,
+			   enum devlink_trap_action *p_action)
+{
+	if (strcmp(actionstr, "drop") == 0) {
+		*p_action = DEVLINK_TRAP_ACTION_DROP;
+	} else if (strcmp(actionstr, "trap") == 0) {
+		*p_action = DEVLINK_TRAP_ACTION_TRAP;
+	} else {
+		pr_err("Unknown trap action \"%s\"\n", actionstr);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 struct dl_args_metadata {
 	uint64_t o_flag;
 	char err_msg[DL_ARGS_REQUIRED_MAX_ERR_LEN];
@@ -1040,6 +1091,7 @@ static const struct dl_args_metadata dl_args_required[] = {
 	{DL_OPT_REGION_ADDRESS,	      "Region address value expected."},
 	{DL_OPT_REGION_LENGTH,	      "Region length value expected."},
 	{DL_OPT_HEALTH_REPORTER_NAME, "Reporter's name is expected."},
+	{DL_OPT_TRAP_NAME,            "Trap's name is expected."},
 };
 
 static int dl_args_finding_required_validate(uint64_t o_required,
@@ -1329,6 +1381,25 @@ static int dl_argv_parse(struct dl *dl, uint64_t o_required,
 			if (err)
 				return err;
 			o_found |= DL_OPT_HEALTH_REPORTER_AUTO_RECOVER;
+		} else if (dl_argv_match(dl, "trap") &&
+			   (o_all & DL_OPT_TRAP_NAME)) {
+			dl_arg_inc(dl);
+			err = dl_argv_str(dl, &opts->trap_name);
+			if (err)
+				return err;
+			o_found |= DL_OPT_TRAP_NAME;
+		} else if (dl_argv_match(dl, "action") &&
+			   (o_all & DL_OPT_TRAP_ACTION)) {
+			const char *actionstr;
+
+			dl_arg_inc(dl);
+			err = dl_argv_str(dl, &actionstr);
+			if (err)
+				return err;
+			err = trap_action_get(actionstr, &opts->trap_action);
+			if (err)
+				return err;
+			o_found |= DL_OPT_TRAP_ACTION;
 		} else {
 			pr_err("Unknown option \"%s\"\n", dl_argv(dl));
 			return -EINVAL;
@@ -1442,6 +1513,12 @@ static void dl_opts_put(struct nlmsghdr *nlh, struct dl *dl)
 	if (opts->present & DL_OPT_HEALTH_REPORTER_AUTO_RECOVER)
 		mnl_attr_put_u8(nlh, DEVLINK_ATTR_HEALTH_REPORTER_AUTO_RECOVER,
 				opts->reporter_auto_recover);
+	if (opts->present & DL_OPT_TRAP_NAME)
+		mnl_attr_put_strz(nlh, DEVLINK_ATTR_TRAP_NAME,
+				  opts->trap_name);
+	if (opts->present & DL_OPT_TRAP_ACTION)
+		mnl_attr_put_u8(nlh, DEVLINK_ATTR_TRAP_ACTION,
+				opts->trap_action);
 
 }
 
@@ -1945,6 +2022,30 @@ static void pr_out_entry_end(struct dl *dl)
 		__pr_out_newline();
 }
 
+static void pr_out_stats(struct dl *dl, struct nlattr *nla_stats)
+{
+	struct nlattr *tb[DEVLINK_ATTR_STATS_MAX + 1] = {};
+	int err;
+
+	if (!dl->stats)
+		return;
+
+	err = mnl_attr_parse_nested(nla_stats, attr_stats_cb, tb);
+	if (err != MNL_CB_OK)
+		return;
+
+	pr_out_object_start(dl, "stats");
+	pr_out_object_start(dl, "rx");
+	if (tb[DEVLINK_ATTR_STATS_RX_BYTES])
+		pr_out_u64(dl, "bytes",
+			   mnl_attr_get_u64(tb[DEVLINK_ATTR_STATS_RX_BYTES]));
+	if (tb[DEVLINK_ATTR_STATS_RX_PACKETS])
+		pr_out_u64(dl, "packets",
+			   mnl_attr_get_u64(tb[DEVLINK_ATTR_STATS_RX_PACKETS]));
+	pr_out_object_end(dl);
+	pr_out_object_end(dl);
+}
+
 static const char *param_cmode_name(uint8_t cmode)
 {
 	switch (cmode) {
@@ -3764,6 +3865,10 @@ static const char *cmd_name(uint8_t cmd)
 	case DEVLINK_CMD_REGION_SET: return "set";
 	case DEVLINK_CMD_REGION_NEW: return "new";
 	case DEVLINK_CMD_REGION_DEL: return "del";
+	case DEVLINK_CMD_TRAP_GET: return "get";
+	case DEVLINK_CMD_TRAP_SET: return "set";
+	case DEVLINK_CMD_TRAP_NEW: return "new";
+	case DEVLINK_CMD_TRAP_DEL: return "del";
 	default: return "<unknown cmd>";
 	}
 }
@@ -3792,6 +3897,11 @@ static const char *cmd_obj(uint8_t cmd)
 	case DEVLINK_CMD_REGION_NEW:
 	case DEVLINK_CMD_REGION_DEL:
 		return "region";
+	case DEVLINK_CMD_TRAP_GET:
+	case DEVLINK_CMD_TRAP_SET:
+	case DEVLINK_CMD_TRAP_NEW:
+	case DEVLINK_CMD_TRAP_DEL:
+		return "trap";
 	default: return "<unknown obj>";
 	}
 }
@@ -3817,6 +3927,7 @@ static bool cmd_filter_check(struct dl *dl, uint8_t cmd)
 }
 
 static void pr_out_region(struct dl *dl, struct nlattr **tb);
+static void pr_out_trap(struct dl *dl, struct nlattr **tb, bool array);
 
 static int cmd_mon_show_cb(const struct nlmsghdr *nlh, void *data)
 {
@@ -3872,6 +3983,22 @@ static int cmd_mon_show_cb(const struct nlmsghdr *nlh, void *data)
 		pr_out_mon_header(genl->cmd);
 		pr_out_region(dl, tb);
 		break;
+	case DEVLINK_CMD_TRAP_GET: /* fall through */
+	case DEVLINK_CMD_TRAP_SET: /* fall through */
+	case DEVLINK_CMD_TRAP_NEW: /* fall through */
+	case DEVLINK_CMD_TRAP_DEL:
+		mnl_attr_parse(nlh, sizeof(*genl), attr_cb, tb);
+		if (!tb[DEVLINK_ATTR_BUS_NAME] || !tb[DEVLINK_ATTR_DEV_NAME] ||
+		    !tb[DEVLINK_ATTR_TRAP_NAME] ||
+		    !tb[DEVLINK_ATTR_TRAP_TYPE] ||
+		    !tb[DEVLINK_ATTR_TRAP_ACTION] ||
+		    !tb[DEVLINK_ATTR_TRAP_GROUP_NAME] ||
+		    !tb[DEVLINK_ATTR_TRAP_METADATA] ||
+		    !tb[DEVLINK_ATTR_STATS])
+			return MNL_CB_ERROR;
+		pr_out_mon_header(genl->cmd);
+		pr_out_trap(dl, tb, false);
+		break;
 	}
 	return MNL_CB_OK;
 }
@@ -3885,7 +4012,8 @@ static int cmd_mon_show(struct dl *dl)
 	while ((cur_obj = dl_argv_index(dl, index++))) {
 		if (strcmp(cur_obj, "all") != 0 &&
 		    strcmp(cur_obj, "dev") != 0 &&
-		    strcmp(cur_obj, "port") != 0) {
+		    strcmp(cur_obj, "port") != 0 &&
+		    strcmp(cur_obj, "trap") != 0) {
 			pr_err("Unknown object \"%s\"\n", cur_obj);
 			return -EINVAL;
 		}
@@ -3902,7 +4030,7 @@ static int cmd_mon_show(struct dl *dl)
 static void cmd_mon_help(void)
 {
 	pr_err("Usage: devlink monitor [ all | OBJECT-LIST ]\n"
-	       "where  OBJECT-LIST := { dev | port }\n");
+	       "where  OBJECT-LIST := { dev | port | trap }\n");
 }
 
 static int cmd_mon(struct dl *dl)
@@ -6330,12 +6458,160 @@ static int cmd_health(struct dl *dl)
 	return -ENOENT;
 }
 
+static const char *trap_type_name(uint8_t type)
+{
+	switch (type) {
+	case DEVLINK_TRAP_TYPE_DROP:
+		return "drop";
+	case DEVLINK_TRAP_TYPE_EXCEPTION:
+		return "exception";
+	default:
+		return "<unknown type>";
+	}
+}
+
+static const char *trap_action_name(uint8_t action)
+{
+	switch (action) {
+	case DEVLINK_TRAP_ACTION_DROP:
+		return "drop";
+	case DEVLINK_TRAP_ACTION_TRAP:
+		return "trap";
+	default:
+		return "<unknown action>";
+	}
+}
+
+static const char *trap_metadata_name(const struct nlattr *attr)
+{
+	switch (attr->nla_type) {
+	case DEVLINK_ATTR_TRAP_METADATA_TYPE_IN_PORT:
+		return "input_port";
+	default:
+		return "<unknown metadata type>";
+	}
+}
+static void pr_out_trap_metadata(struct dl *dl, struct nlattr *attr)
+{
+	struct nlattr *attr_metadata;
+
+	pr_out_array_start(dl, "metadata");
+	mnl_attr_for_each_nested(attr_metadata, attr)
+		pr_out_str_value(dl, trap_metadata_name(attr_metadata));
+	pr_out_array_end(dl);
+}
+
+static void pr_out_trap(struct dl *dl, struct nlattr **tb, bool array)
+{
+	uint8_t action = mnl_attr_get_u8(tb[DEVLINK_ATTR_TRAP_ACTION]);
+	uint8_t type = mnl_attr_get_u8(tb[DEVLINK_ATTR_TRAP_TYPE]);
+
+	if (array)
+		pr_out_handle_start_arr(dl, tb);
+	else
+		__pr_out_handle_start(dl, tb, true, false);
+
+	pr_out_str(dl, "name", mnl_attr_get_str(tb[DEVLINK_ATTR_TRAP_NAME]));
+	pr_out_str(dl, "type", trap_type_name(type));
+	pr_out_bool(dl, "generic", !!tb[DEVLINK_ATTR_TRAP_GENERIC]);
+	pr_out_str(dl, "action", trap_action_name(action));
+	pr_out_str(dl, "group",
+		   mnl_attr_get_str(tb[DEVLINK_ATTR_TRAP_GROUP_NAME]));
+	if (dl->verbose)
+		pr_out_trap_metadata(dl, tb[DEVLINK_ATTR_TRAP_METADATA]);
+	pr_out_stats(dl, tb[DEVLINK_ATTR_STATS]);
+	pr_out_handle_end(dl);
+}
+
+static int cmd_trap_show_cb(const struct nlmsghdr *nlh, void *data)
+{
+	struct genlmsghdr *genl = mnl_nlmsg_get_payload(nlh);
+	struct nlattr *tb[DEVLINK_ATTR_MAX + 1] = {};
+	struct dl *dl = data;
+
+	mnl_attr_parse(nlh, sizeof(*genl), attr_cb, tb);
+	if (!tb[DEVLINK_ATTR_BUS_NAME] || !tb[DEVLINK_ATTR_DEV_NAME] ||
+	    !tb[DEVLINK_ATTR_TRAP_NAME] || !tb[DEVLINK_ATTR_TRAP_TYPE] ||
+	    !tb[DEVLINK_ATTR_TRAP_ACTION] ||
+	    !tb[DEVLINK_ATTR_TRAP_GROUP_NAME] ||
+	    !tb[DEVLINK_ATTR_TRAP_METADATA] || !tb[DEVLINK_ATTR_STATS])
+		return MNL_CB_ERROR;
+
+	pr_out_trap(dl, tb, true);
+
+	return MNL_CB_OK;
+}
+
+static void cmd_trap_help(void)
+{
+	pr_err("Usage: devlink trap set DEV trap TRAP [ action { trap | drop } ]\n");
+	pr_err("       devlink trap show [ DEV trap TRAP ]\n");
+}
+
+static int cmd_trap_show(struct dl *dl)
+{
+	uint16_t flags = NLM_F_REQUEST | NLM_F_ACK;
+	struct nlmsghdr *nlh;
+	int err;
+
+	if (dl_argc(dl) == 0)
+		flags |= NLM_F_DUMP;
+
+	nlh = mnlg_msg_prepare(dl->nlg, DEVLINK_CMD_TRAP_GET, flags);
+
+	if (dl_argc(dl) > 0) {
+		err = dl_argv_parse_put(nlh, dl,
+					DL_OPT_HANDLE | DL_OPT_TRAP_NAME, 0);
+		if (err)
+			return err;
+	}
+
+	pr_out_section_start(dl, "trap");
+	err = _mnlg_socket_sndrcv(dl->nlg, nlh, cmd_trap_show_cb, dl);
+	pr_out_section_end(dl);
+
+	return err;
+}
+
+static int cmd_trap_set(struct dl *dl)
+{
+	struct nlmsghdr *nlh;
+	int err;
+
+	nlh = mnlg_msg_prepare(dl->nlg, DEVLINK_CMD_TRAP_SET,
+			       NLM_F_REQUEST | NLM_F_ACK);
+
+	err = dl_argv_parse_put(nlh, dl, DL_OPT_HANDLE | DL_OPT_TRAP_NAME,
+				DL_OPT_TRAP_ACTION);
+	if (err)
+		return err;
+
+	return _mnlg_socket_sndrcv(dl->nlg, nlh, NULL, NULL);
+}
+
+static int cmd_trap(struct dl *dl)
+{
+	if (dl_argv_match(dl, "help")) {
+		cmd_trap_help();
+		return 0;
+	} else if (dl_argv_match(dl, "show") ||
+		   dl_argv_match(dl, "list") || dl_no_arg(dl)) {
+		dl_arg_inc(dl);
+		return cmd_trap_show(dl);
+	} else if (dl_argv_match(dl, "set")) {
+		dl_arg_inc(dl);
+		return cmd_trap_set(dl);
+	}
+	pr_err("Command \"%s\" not found\n", dl_argv(dl));
+	return -ENOENT;
+}
+
 static void help(void)
 {
 	pr_err("Usage: devlink [ OPTIONS ] OBJECT { COMMAND | help }\n"
 	       "       devlink [ -f[orce] ] -b[atch] filename\n"
-	       "where  OBJECT := { dev | port | sb | monitor | dpipe | resource | region | health }\n"
-	       "       OPTIONS := { -V[ersion] | -n[o-nice-names] | -j[son] | -p[retty] | -v[erbose] }\n");
+	       "where  OBJECT := { dev | port | sb | monitor | dpipe | resource | region | health | trap }\n"
+	       "       OPTIONS := { -V[ersion] | -n[o-nice-names] | -j[son] | -p[retty] | -v[erbose] -s[tatistics] }\n");
 }
 
 static int dl_cmd(struct dl *dl, int argc, char **argv)
@@ -6370,6 +6646,9 @@ static int dl_cmd(struct dl *dl, int argc, char **argv)
 	} else if (dl_argv_match(dl, "health")) {
 		dl_arg_inc(dl);
 		return cmd_health(dl);
+	} else if (dl_argv_match(dl, "trap")) {
+		dl_arg_inc(dl);
+		return cmd_trap(dl);
 	}
 	pr_err("Object \"%s\" not found\n", dl_argv(dl));
 	return -ENOENT;
@@ -6479,6 +6758,7 @@ int main(int argc, char **argv)
 		{ "json",		no_argument,		NULL, 'j' },
 		{ "pretty",		no_argument,		NULL, 'p' },
 		{ "verbose",		no_argument,		NULL, 'v' },
+		{ "statistics",		no_argument,		NULL, 's' },
 		{ NULL, 0, NULL, 0 }
 	};
 	const char *batch_file = NULL;
@@ -6494,7 +6774,7 @@ int main(int argc, char **argv)
 		return EXIT_FAILURE;
 	}
 
-	while ((opt = getopt_long(argc, argv, "Vfb:njpv",
+	while ((opt = getopt_long(argc, argv, "Vfb:njpvs",
 				  long_options, NULL)) >= 0) {
 
 		switch (opt) {
@@ -6520,6 +6800,9 @@ int main(int argc, char **argv)
 		case 'v':
 			dl->verbose = true;
 			break;
+		case 's':
+			dl->stats = true;
+			break;
 		default:
 			pr_err("Unknown option.\n");
 			help();
-- 
2.21.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH iproute2-next v2 3/4] devlink: Add devlink trap group set and show commands
  2019-08-13  8:31 [PATCH iproute2-next v2 0/4] Add devlink-trap support Ido Schimmel
  2019-08-13  8:31 ` [PATCH iproute2-next v2 1/4] devlink: Increase number of supported options Ido Schimmel
  2019-08-13  8:31 ` [PATCH iproute2-next v2 2/4] devlink: Add devlink trap set and show commands Ido Schimmel
@ 2019-08-13  8:31 ` " Ido Schimmel
  2019-08-13 10:15   ` Jiri Pirko
  2019-08-13  8:31 ` [PATCH iproute2-next v2 4/4] devlink: Add man page for devlink-trap Ido Schimmel
  2019-08-18 18:51 ` [PATCH iproute2-next v2 0/4] Add devlink-trap support David Ahern
  4 siblings, 1 reply; 11+ messages in thread
From: Ido Schimmel @ 2019-08-13  8:31 UTC (permalink / raw)
  To: netdev; +Cc: dsahern, stephen, jiri, mlxsw, Ido Schimmel

From: Ido Schimmel <idosch@mellanox.com>

These commands are similar to the trap set and show commands, but
operate on a trap group and not individual traps. Example:

# devlink trap group set netdevsim/netdevsim10 group l3_drops action trap
# devlink -jps trap group show netdevsim/netdevsim10 group l3_drops
{
    "trap_group": {
        "netdevsim/netdevsim10": [ {
                "name": "l3_drops",
                "generic": true,
                "stats": {
                    "rx": {
                        "bytes": 0,
                        "packets": 0
                    }
                }
            } ]
    }
}

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
 devlink/devlink.c | 135 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 133 insertions(+), 2 deletions(-)

diff --git a/devlink/devlink.c b/devlink/devlink.c
index 81fff4429841..2f084c020765 100644
--- a/devlink/devlink.c
+++ b/devlink/devlink.c
@@ -235,6 +235,7 @@ static void ifname_map_free(struct ifname_map *ifname_map)
 #define DL_OPT_HEALTH_REPORTER_AUTO_RECOVER	BIT(28)
 #define DL_OPT_TRAP_NAME		BIT(29)
 #define DL_OPT_TRAP_ACTION		BIT(30)
+#define DL_OPT_TRAP_GROUP_NAME		BIT(31)
 
 struct dl_opts {
 	uint64_t present; /* flags of present items */
@@ -272,6 +273,7 @@ struct dl_opts {
 	uint64_t reporter_graceful_period;
 	bool reporter_auto_recover;
 	const char *trap_name;
+	const char *trap_group_name;
 	enum devlink_trap_action trap_action;
 };
 
@@ -1092,6 +1094,7 @@ static const struct dl_args_metadata dl_args_required[] = {
 	{DL_OPT_REGION_LENGTH,	      "Region length value expected."},
 	{DL_OPT_HEALTH_REPORTER_NAME, "Reporter's name is expected."},
 	{DL_OPT_TRAP_NAME,            "Trap's name is expected."},
+	{DL_OPT_TRAP_GROUP_NAME,      "Trap group's name is expected."},
 };
 
 static int dl_args_finding_required_validate(uint64_t o_required,
@@ -1388,6 +1391,13 @@ static int dl_argv_parse(struct dl *dl, uint64_t o_required,
 			if (err)
 				return err;
 			o_found |= DL_OPT_TRAP_NAME;
+		} else if (dl_argv_match(dl, "group") &&
+			   (o_all & DL_OPT_TRAP_GROUP_NAME)) {
+			dl_arg_inc(dl);
+			err = dl_argv_str(dl, &opts->trap_group_name);
+			if (err)
+				return err;
+			o_found |= DL_OPT_TRAP_GROUP_NAME;
 		} else if (dl_argv_match(dl, "action") &&
 			   (o_all & DL_OPT_TRAP_ACTION)) {
 			const char *actionstr;
@@ -1516,6 +1526,9 @@ static void dl_opts_put(struct nlmsghdr *nlh, struct dl *dl)
 	if (opts->present & DL_OPT_TRAP_NAME)
 		mnl_attr_put_strz(nlh, DEVLINK_ATTR_TRAP_NAME,
 				  opts->trap_name);
+	if (opts->present & DL_OPT_TRAP_GROUP_NAME)
+		mnl_attr_put_strz(nlh, DEVLINK_ATTR_TRAP_GROUP_NAME,
+				  opts->trap_group_name);
 	if (opts->present & DL_OPT_TRAP_ACTION)
 		mnl_attr_put_u8(nlh, DEVLINK_ATTR_TRAP_ACTION,
 				opts->trap_action);
@@ -3869,6 +3882,10 @@ static const char *cmd_name(uint8_t cmd)
 	case DEVLINK_CMD_TRAP_SET: return "set";
 	case DEVLINK_CMD_TRAP_NEW: return "new";
 	case DEVLINK_CMD_TRAP_DEL: return "del";
+	case DEVLINK_CMD_TRAP_GROUP_GET: return "get";
+	case DEVLINK_CMD_TRAP_GROUP_SET: return "set";
+	case DEVLINK_CMD_TRAP_GROUP_NEW: return "new";
+	case DEVLINK_CMD_TRAP_GROUP_DEL: return "del";
 	default: return "<unknown cmd>";
 	}
 }
@@ -3902,6 +3919,11 @@ static const char *cmd_obj(uint8_t cmd)
 	case DEVLINK_CMD_TRAP_NEW:
 	case DEVLINK_CMD_TRAP_DEL:
 		return "trap";
+	case DEVLINK_CMD_TRAP_GROUP_GET:
+	case DEVLINK_CMD_TRAP_GROUP_SET:
+	case DEVLINK_CMD_TRAP_GROUP_NEW:
+	case DEVLINK_CMD_TRAP_GROUP_DEL:
+		return "trap-group";
 	default: return "<unknown obj>";
 	}
 }
@@ -3928,6 +3950,7 @@ static bool cmd_filter_check(struct dl *dl, uint8_t cmd)
 
 static void pr_out_region(struct dl *dl, struct nlattr **tb);
 static void pr_out_trap(struct dl *dl, struct nlattr **tb, bool array);
+static void pr_out_trap_group(struct dl *dl, struct nlattr **tb, bool array);
 
 static int cmd_mon_show_cb(const struct nlmsghdr *nlh, void *data)
 {
@@ -3999,6 +4022,18 @@ static int cmd_mon_show_cb(const struct nlmsghdr *nlh, void *data)
 		pr_out_mon_header(genl->cmd);
 		pr_out_trap(dl, tb, false);
 		break;
+	case DEVLINK_CMD_TRAP_GROUP_GET: /* fall through */
+	case DEVLINK_CMD_TRAP_GROUP_SET: /* fall through */
+	case DEVLINK_CMD_TRAP_GROUP_NEW: /* fall through */
+	case DEVLINK_CMD_TRAP_GROUP_DEL:
+		mnl_attr_parse(nlh, sizeof(*genl), attr_cb, tb);
+		if (!tb[DEVLINK_ATTR_BUS_NAME] || !tb[DEVLINK_ATTR_DEV_NAME] ||
+		    !tb[DEVLINK_ATTR_TRAP_GROUP_NAME] ||
+		    !tb[DEVLINK_ATTR_STATS])
+			return MNL_CB_ERROR;
+		pr_out_mon_header(genl->cmd);
+		pr_out_trap_group(dl, tb, false);
+		break;
 	}
 	return MNL_CB_OK;
 }
@@ -4013,7 +4048,8 @@ static int cmd_mon_show(struct dl *dl)
 		if (strcmp(cur_obj, "all") != 0 &&
 		    strcmp(cur_obj, "dev") != 0 &&
 		    strcmp(cur_obj, "port") != 0 &&
-		    strcmp(cur_obj, "trap") != 0) {
+		    strcmp(cur_obj, "trap") != 0 &&
+		    strcmp(cur_obj, "trap-group") != 0) {
 			pr_err("Unknown object \"%s\"\n", cur_obj);
 			return -EINVAL;
 		}
@@ -4030,7 +4066,7 @@ static int cmd_mon_show(struct dl *dl)
 static void cmd_mon_help(void)
 {
 	pr_err("Usage: devlink monitor [ all | OBJECT-LIST ]\n"
-	       "where  OBJECT-LIST := { dev | port | trap }\n");
+	       "where  OBJECT-LIST := { dev | port | trap | trap-group }\n");
 }
 
 static int cmd_mon(struct dl *dl)
@@ -6546,6 +6582,8 @@ static void cmd_trap_help(void)
 {
 	pr_err("Usage: devlink trap set DEV trap TRAP [ action { trap | drop } ]\n");
 	pr_err("       devlink trap show [ DEV trap TRAP ]\n");
+	pr_err("       devlink trap group set DEV group GROUP [ action { trap | drop } ]\n");
+	pr_err("       devlink trap group show [ DEV group GROUP ]\n");
 }
 
 static int cmd_trap_show(struct dl *dl)
@@ -6589,6 +6627,96 @@ static int cmd_trap_set(struct dl *dl)
 	return _mnlg_socket_sndrcv(dl->nlg, nlh, NULL, NULL);
 }
 
+static void pr_out_trap_group(struct dl *dl, struct nlattr **tb, bool array)
+{
+	if (array)
+		pr_out_handle_start_arr(dl, tb);
+	else
+		__pr_out_handle_start(dl, tb, true, false);
+
+	pr_out_str(dl, "name",
+		   mnl_attr_get_str(tb[DEVLINK_ATTR_TRAP_GROUP_NAME]));
+	pr_out_bool(dl, "generic", !!tb[DEVLINK_ATTR_TRAP_GENERIC]);
+	pr_out_stats(dl, tb[DEVLINK_ATTR_STATS]);
+	pr_out_handle_end(dl);
+}
+
+static int cmd_trap_group_show_cb(const struct nlmsghdr *nlh, void *data)
+{
+	struct genlmsghdr *genl = mnl_nlmsg_get_payload(nlh);
+	struct nlattr *tb[DEVLINK_ATTR_MAX + 1] = {};
+	struct dl *dl = data;
+
+	mnl_attr_parse(nlh, sizeof(*genl), attr_cb, tb);
+	if (!tb[DEVLINK_ATTR_BUS_NAME] || !tb[DEVLINK_ATTR_DEV_NAME] ||
+	    !tb[DEVLINK_ATTR_TRAP_GROUP_NAME] || !tb[DEVLINK_ATTR_STATS])
+		return MNL_CB_ERROR;
+
+	pr_out_trap_group(dl, tb, true);
+
+	return MNL_CB_OK;
+}
+
+static int cmd_trap_group_show(struct dl *dl)
+{
+	uint16_t flags = NLM_F_REQUEST | NLM_F_ACK;
+	struct nlmsghdr *nlh;
+	int err;
+
+	if (dl_argc(dl) == 0)
+		flags |= NLM_F_DUMP;
+
+	nlh = mnlg_msg_prepare(dl->nlg, DEVLINK_CMD_TRAP_GROUP_GET, flags);
+
+	if (dl_argc(dl) > 0) {
+		err = dl_argv_parse_put(nlh, dl,
+					DL_OPT_HANDLE | DL_OPT_TRAP_GROUP_NAME,
+					0);
+		if (err)
+			return err;
+	}
+
+	pr_out_section_start(dl, "trap_group");
+	err = _mnlg_socket_sndrcv(dl->nlg, nlh, cmd_trap_group_show_cb, dl);
+	pr_out_section_end(dl);
+
+	return err;
+}
+
+static int cmd_trap_group_set(struct dl *dl)
+{
+	struct nlmsghdr *nlh;
+	int err;
+
+	nlh = mnlg_msg_prepare(dl->nlg, DEVLINK_CMD_TRAP_GROUP_SET,
+			       NLM_F_REQUEST | NLM_F_ACK);
+
+	err = dl_argv_parse_put(nlh, dl,
+				DL_OPT_HANDLE | DL_OPT_TRAP_GROUP_NAME,
+				DL_OPT_TRAP_ACTION);
+	if (err)
+		return err;
+
+	return _mnlg_socket_sndrcv(dl->nlg, nlh, NULL, NULL);
+}
+
+static int cmd_trap_group(struct dl *dl)
+{
+	if (dl_argv_match(dl, "help")) {
+		cmd_trap_help();
+		return 0;
+	} else if (dl_argv_match(dl, "show") ||
+		   dl_argv_match(dl, "list") || dl_no_arg(dl)) {
+		dl_arg_inc(dl);
+		return cmd_trap_group_show(dl);
+	} else if (dl_argv_match(dl, "set")) {
+		dl_arg_inc(dl);
+		return cmd_trap_group_set(dl);
+	}
+	pr_err("Command \"%s\" not found\n", dl_argv(dl));
+	return -ENOENT;
+}
+
 static int cmd_trap(struct dl *dl)
 {
 	if (dl_argv_match(dl, "help")) {
@@ -6601,6 +6729,9 @@ static int cmd_trap(struct dl *dl)
 	} else if (dl_argv_match(dl, "set")) {
 		dl_arg_inc(dl);
 		return cmd_trap_set(dl);
+	} else if (dl_argv_match(dl, "group")) {
+		dl_arg_inc(dl);
+		return cmd_trap_group(dl);
 	}
 	pr_err("Command \"%s\" not found\n", dl_argv(dl));
 	return -ENOENT;
-- 
2.21.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH iproute2-next v2 4/4] devlink: Add man page for devlink-trap
  2019-08-13  8:31 [PATCH iproute2-next v2 0/4] Add devlink-trap support Ido Schimmel
                   ` (2 preceding siblings ...)
  2019-08-13  8:31 ` [PATCH iproute2-next v2 3/4] devlink: Add devlink trap group " Ido Schimmel
@ 2019-08-13  8:31 ` Ido Schimmel
  2019-08-13 10:20   ` Jiri Pirko
  2019-08-18 18:51 ` [PATCH iproute2-next v2 0/4] Add devlink-trap support David Ahern
  4 siblings, 1 reply; 11+ messages in thread
From: Ido Schimmel @ 2019-08-13  8:31 UTC (permalink / raw)
  To: netdev; +Cc: dsahern, stephen, jiri, mlxsw, Ido Schimmel

From: Ido Schimmel <idosch@mellanox.com>

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
 man/man8/devlink-monitor.8 |   3 +-
 man/man8/devlink-trap.8    | 138 +++++++++++++++++++++++++++++++++++++
 man/man8/devlink.8         |  11 ++-
 3 files changed, 150 insertions(+), 2 deletions(-)
 create mode 100644 man/man8/devlink-trap.8

diff --git a/man/man8/devlink-monitor.8 b/man/man8/devlink-monitor.8
index 13fe641dc8f5..fffab3a4ce88 100644
--- a/man/man8/devlink-monitor.8
+++ b/man/man8/devlink-monitor.8
@@ -21,7 +21,7 @@ command is the first in the command line and then the object list.
 .I OBJECT-LIST
 is the list of object types that we want to monitor.
 It may contain
-.BR dev ", " port ".
+.BR dev ", " port ", " trap ", " trap-group .
 
 .B devlink
 opens Devlink Netlink socket, listens on it and dumps state changes.
@@ -31,6 +31,7 @@ opens Devlink Netlink socket, listens on it and dumps state changes.
 .BR devlink-dev (8),
 .BR devlink-sb (8),
 .BR devlink-port (8),
+.BR devlink-trap (8),
 .br
 
 .SH AUTHOR
diff --git a/man/man8/devlink-trap.8 b/man/man8/devlink-trap.8
new file mode 100644
index 000000000000..4f079eb86d7b
--- /dev/null
+++ b/man/man8/devlink-trap.8
@@ -0,0 +1,138 @@
+.TH DEVLINK\-TRAP 8 "2 August 2019" "iproute2" "Linux"
+.SH NAME
+devlink-trap \- devlink trap configuration
+.SH SYNOPSIS
+.sp
+.ad l
+.in +8
+.ti -8
+.B devlink
+.RI "[ " OPTIONS " ]"
+.B trap
+.RI "{ " COMMAND " |"
+.BR help " }"
+.sp
+
+.ti -8
+.IR OPTIONS " := { "
+\fB\-v\fR[\fIerbose\fR] |
+\fB\-s\fR[\fItatistics\fR] }
+
+.ti -8
+.B "devlink trap show"
+.RI "[ " DEV
+.B trap
+.IR TRAP " ]"
+
+.ti -8
+.BI "devlink trap set " DEV " trap " TRAP
+.RB "[ " action " { " trap " | " drop " } ]"
+
+.ti -8
+.B "devlink trap group show"
+.RI "[ " DEV
+.B group
+.IR GROUP " ]"
+
+.ti -8
+.BI "devlink trap group set " DEV " group " GROUP
+.RB "[ " action " { " trap " | " drop " } ]"
+
+.ti -8
+.B devlink trap help
+
+.SH "DESCRIPTION"
+.SS devlink trap show - display available packet traps and their attributes
+
+.PP
+.I "DEV"
+- specifies the devlink device from which to show packet traps.
+If this argument is omitted all packet traps of all devices are listed.
+
+.PP
+.BI "trap " TRAP
+- specifies the packet trap.
+Only applicable if a devlink device is also specified.
+
+.SS devlink trap set - set attributes of a packet trap
+
+.PP
+.I "DEV"
+- specifies the devlink device the packet trap belongs to.
+
+.PP
+.BI "trap " TRAP
+- specifies the packet trap.
+
+.TP
+.BR action " { " trap " | " drop " } "
+packet trap action.
+
+.I trap
+- the sole copy of the packet is sent to the CPU.
+
+.I drop
+- the packet is dropped by the underlying device and a copy is not sent to the CPU.
+
+.SS devlink trap group show - display available packet trap groups and their attributes
+
+.PP
+.I "DEV"
+- specifies the devlink device from which to show packet trap groups.
+If this argument is omitted all packet trap groups of all devices are listed.
+
+.PP
+.BI "group " GROUP
+- specifies the packet trap group.
+Only applicable if a devlink device is also specified.
+
+.SS devlink trap group set - set attributes of a packet trap group
+
+.PP
+.I "DEV"
+- specifies the devlink device the packet trap group belongs to.
+
+.PP
+.BI "group " GROUP
+- specifies the packet trap group.
+
+.TP
+.BR action " { " trap " | " drop " } "
+packet trap action. The action is set for all the packet traps member in the
+trap group. The actions of non-drop traps cannot be changed and are thus
+skipped.
+
+.SH "EXAMPLES"
+.PP
+devlink trap show
+.RS 4
+List available packet traps.
+.RE
+.PP
+devlink trap group show
+.RS 4
+List available packet trap groups.
+.RE
+.PP
+devlink -vs trap show pci/0000:01:00.0 trap source_mac_is_multicast
+.RS 4
+Show attributes and statistics of a specific packet trap.
+.RE
+.PP
+devlink -s trap group show pci/0000:01:00.0 group l2_drops
+.RS 4
+Show attributes and statistics of a specific packet trap group.
+.RE
+.PP
+devlink trap set pci/0000:01:00.0 trap source_mac_is_multicast action trap
+.RS 4
+Set the action of a specific packet trap to 'trap'.
+
+.SH SEE ALSO
+.BR devlink (8),
+.BR devlink-dev (8),
+.BR devlink-monitor (8),
+.br
+
+.SH AUTHOR
+Ido Schimmel <idosch@mellanox.com>
diff --git a/man/man8/devlink.8 b/man/man8/devlink.8
index 13d4dcd908b3..12d489440a3d 100644
--- a/man/man8/devlink.8
+++ b/man/man8/devlink.8
@@ -7,7 +7,7 @@ devlink \- Devlink tool
 .in +8
 .ti -8
 .B devlink
-.RI "[ " OPTIONS " ] { " dev | port | monitor | sb | resource | region | health " } { " COMMAND " | "
+.RI "[ " OPTIONS " ] { " dev | port | monitor | sb | resource | region | health | trap " } { " COMMAND " | "
 .BR help " }"
 .sp
 
@@ -51,6 +51,10 @@ When combined with -j generate a pretty JSON output.
 .BR "\-v" , " --verbose"
 Turn on verbose output.
 
+.TP
+.BR "\-s" , " --statistics"
+Output statistics.
+
 .SS
 .I OBJECT
 
@@ -82,6 +86,10 @@ Turn on verbose output.
 .B health
 - devlink reporting and recovery
 
+.TP
+.B trap
+- devlink trap configuration
+
 .SS
 .I COMMAND
 
@@ -114,6 +122,7 @@ Exit status is 0 if command was successful or a positive integer upon failure.
 .BR devlink-resource (8),
 .BR devlink-region (8),
 .BR devlink-health (8),
+.BR devlink-trap (8),
 .br
 
 .SH REPORTING BUGS
-- 
2.21.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH iproute2-next v2 2/4] devlink: Add devlink trap set and show commands
  2019-08-13  8:31 ` [PATCH iproute2-next v2 2/4] devlink: Add devlink trap set and show commands Ido Schimmel
@ 2019-08-13  8:44   ` Jiri Pirko
  0 siblings, 0 replies; 11+ messages in thread
From: Jiri Pirko @ 2019-08-13  8:44 UTC (permalink / raw)
  To: Ido Schimmel; +Cc: netdev, dsahern, stephen, jiri, mlxsw, Ido Schimmel

Tue, Aug 13, 2019 at 10:31:41AM CEST, idosch@idosch.org wrote:
>From: Ido Schimmel <idosch@mellanox.com>
>
>The trap set command allows the user to set the action of an individual
>trap. Example:
>
># devlink trap set netdevsim/netdevsim10 trap blackhole_route action trap
>
>The trap show command allows the user to get the current status of an
>individual trap or a dump of all traps in case one is not specified.
>When '-s' is specified the trap's statistics are shown. When '-v' is
>specified the metadata types the trap can provide are shown. Example:
>
># devlink -jvps trap show netdevsim/netdevsim10 trap blackhole_route
>{
>    "trap": {
>        "netdevsim/netdevsim10": [ {
>                "name": "blackhole_route",
>                "type": "drop",
>                "generic": true,
>                "action": "trap",
>                "group": "l3_drops",
>                "metadata": [ "input_port" ],
>                "stats": {
>                    "rx": {
>                        "bytes": 0,
>                        "packets": 0
>                    }
>                }
>            } ]
>    }
>}
>
>Signed-off-by: Ido Schimmel <idosch@mellanox.com>

Acked-by: Jiri Pirko <jiri@mellanox.com>

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH iproute2-next v2 3/4] devlink: Add devlink trap group set and show commands
  2019-08-13  8:31 ` [PATCH iproute2-next v2 3/4] devlink: Add devlink trap group " Ido Schimmel
@ 2019-08-13 10:15   ` Jiri Pirko
  0 siblings, 0 replies; 11+ messages in thread
From: Jiri Pirko @ 2019-08-13 10:15 UTC (permalink / raw)
  To: Ido Schimmel; +Cc: netdev, dsahern, stephen, jiri, mlxsw, Ido Schimmel

Tue, Aug 13, 2019 at 10:31:42AM CEST, idosch@idosch.org wrote:
>From: Ido Schimmel <idosch@mellanox.com>
>
>These commands are similar to the trap set and show commands, but
>operate on a trap group and not individual traps. Example:
>
># devlink trap group set netdevsim/netdevsim10 group l3_drops action trap
># devlink -jps trap group show netdevsim/netdevsim10 group l3_drops
>{
>    "trap_group": {
>        "netdevsim/netdevsim10": [ {
>                "name": "l3_drops",
>                "generic": true,
>                "stats": {
>                    "rx": {
>                        "bytes": 0,
>                        "packets": 0
>                    }
>                }
>            } ]
>    }
>}
>
>Signed-off-by: Ido Schimmel <idosch@mellanox.com>

Acked-by: Jiri Pirko <jiri@mellanox.com>

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH iproute2-next v2 4/4] devlink: Add man page for devlink-trap
  2019-08-13  8:31 ` [PATCH iproute2-next v2 4/4] devlink: Add man page for devlink-trap Ido Schimmel
@ 2019-08-13 10:20   ` Jiri Pirko
  2019-08-13 10:39     ` Ido Schimmel
  0 siblings, 1 reply; 11+ messages in thread
From: Jiri Pirko @ 2019-08-13 10:20 UTC (permalink / raw)
  To: Ido Schimmel; +Cc: netdev, dsahern, stephen, jiri, mlxsw, Ido Schimmel

Tue, Aug 13, 2019 at 10:31:43AM CEST, idosch@idosch.org wrote:
>From: Ido Schimmel <idosch@mellanox.com>
>
>Signed-off-by: Ido Schimmel <idosch@mellanox.com>
>---
> man/man8/devlink-monitor.8 |   3 +-
> man/man8/devlink-trap.8    | 138 +++++++++++++++++++++++++++++++++++++
> man/man8/devlink.8         |  11 ++-
> 3 files changed, 150 insertions(+), 2 deletions(-)
> create mode 100644 man/man8/devlink-trap.8
>
>diff --git a/man/man8/devlink-monitor.8 b/man/man8/devlink-monitor.8
>index 13fe641dc8f5..fffab3a4ce88 100644
>--- a/man/man8/devlink-monitor.8
>+++ b/man/man8/devlink-monitor.8
>@@ -21,7 +21,7 @@ command is the first in the command line and then the object list.
> .I OBJECT-LIST
> is the list of object types that we want to monitor.
> It may contain
>-.BR dev ", " port ".
>+.BR dev ", " port ", " trap ", " trap-group .

Looks like "trap-group" is a leftover here, isn't it?


> 
> .B devlink
> opens Devlink Netlink socket, listens on it and dumps state changes.
>@@ -31,6 +31,7 @@ opens Devlink Netlink socket, listens on it and dumps state changes.
> .BR devlink-dev (8),
> .BR devlink-sb (8),
> .BR devlink-port (8),
>+.BR devlink-trap (8),
> .br
> 
> .SH AUTHOR
>diff --git a/man/man8/devlink-trap.8 b/man/man8/devlink-trap.8
>new file mode 100644
>index 000000000000..4f079eb86d7b
>--- /dev/null
>+++ b/man/man8/devlink-trap.8
>@@ -0,0 +1,138 @@
>+.TH DEVLINK\-TRAP 8 "2 August 2019" "iproute2" "Linux"
>+.SH NAME
>+devlink-trap \- devlink trap configuration
>+.SH SYNOPSIS
>+.sp
>+.ad l
>+.in +8
>+.ti -8
>+.B devlink
>+.RI "[ " OPTIONS " ]"
>+.B trap
>+.RI "{ " COMMAND " |"
>+.BR help " }"
>+.sp
>+
>+.ti -8
>+.IR OPTIONS " := { "
>+\fB\-v\fR[\fIerbose\fR] |
>+\fB\-s\fR[\fItatistics\fR] }

Not sure you need to put generic option here. But I don't mind much.

Otherwise this looks fine.
Acked-by: Jiri Pirko <jiri@mellanox.com>

[...]

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH iproute2-next v2 4/4] devlink: Add man page for devlink-trap
  2019-08-13 10:20   ` Jiri Pirko
@ 2019-08-13 10:39     ` Ido Schimmel
  2019-08-13 10:52       ` Jiri Pirko
  0 siblings, 1 reply; 11+ messages in thread
From: Ido Schimmel @ 2019-08-13 10:39 UTC (permalink / raw)
  To: Jiri Pirko; +Cc: netdev, dsahern, stephen, jiri, mlxsw, Ido Schimmel

On Tue, Aug 13, 2019 at 12:20:37PM +0200, Jiri Pirko wrote:
> Tue, Aug 13, 2019 at 10:31:43AM CEST, idosch@idosch.org wrote:
> >From: Ido Schimmel <idosch@mellanox.com>
> >
> >Signed-off-by: Ido Schimmel <idosch@mellanox.com>
> >---
> > man/man8/devlink-monitor.8 |   3 +-
> > man/man8/devlink-trap.8    | 138 +++++++++++++++++++++++++++++++++++++
> > man/man8/devlink.8         |  11 ++-
> > 3 files changed, 150 insertions(+), 2 deletions(-)
> > create mode 100644 man/man8/devlink-trap.8
> >
> >diff --git a/man/man8/devlink-monitor.8 b/man/man8/devlink-monitor.8
> >index 13fe641dc8f5..fffab3a4ce88 100644
> >--- a/man/man8/devlink-monitor.8
> >+++ b/man/man8/devlink-monitor.8
> >@@ -21,7 +21,7 @@ command is the first in the command line and then the object list.
> > .I OBJECT-LIST
> > is the list of object types that we want to monitor.
> > It may contain
> >-.BR dev ", " port ".
> >+.BR dev ", " port ", " trap ", " trap-group .
> 
> Looks like "trap-group" is a leftover here, isn't it?

You get events when traps and groups are created / destroyed. See below output
when creating a new netdevsim device:

$ devlink mon trap-group
[trap-group,new] netdevsim/netdevsim20: name l2_drops generic true
[trap-group,new] netdevsim/netdevsim20: name l3_drops generic true
[trap-group,new] netdevsim/netdevsim20: name buffer_drops generic true

$ devlink mon trap
[trap,new] netdevsim/netdevsim10: name source_mac_is_multicast type drop generic true action drop group l2_drops
[trap,new] netdevsim/netdevsim10: name vlan_tag_mismatch type drop generic true action drop group l2_drops
[trap,new] netdevsim/netdevsim10: name ingress_vlan_filter type drop generic true action drop group l2_drops
[trap,new] netdevsim/netdevsim10: name ingress_spanning_tree_filter type drop generic true action drop group l2_drops
[trap,new] netdevsim/netdevsim10: name port_list_is_empty type drop generic true action drop group l2_drops
[trap,new] netdevsim/netdevsim10: name port_loopback_filter type drop generic true action drop group l2_drops
[trap,new] netdevsim/netdevsim10: name fid_miss type exception generic false action trap group l2_drops
[trap,new] netdevsim/netdevsim10: name blackhole_route type drop generic true action drop group l3_drops
[trap,new] netdevsim/netdevsim10: name ttl_value_is_too_small type exception generic true action trap group l3_drops
[trap,new] netdevsim/netdevsim10: name tail_drop type drop generic true action drop group buffer_drops

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH iproute2-next v2 4/4] devlink: Add man page for devlink-trap
  2019-08-13 10:39     ` Ido Schimmel
@ 2019-08-13 10:52       ` Jiri Pirko
  0 siblings, 0 replies; 11+ messages in thread
From: Jiri Pirko @ 2019-08-13 10:52 UTC (permalink / raw)
  To: Ido Schimmel; +Cc: netdev, dsahern, stephen, jiri, mlxsw, Ido Schimmel

Tue, Aug 13, 2019 at 12:39:04PM CEST, idosch@idosch.org wrote:
>On Tue, Aug 13, 2019 at 12:20:37PM +0200, Jiri Pirko wrote:
>> Tue, Aug 13, 2019 at 10:31:43AM CEST, idosch@idosch.org wrote:
>> >From: Ido Schimmel <idosch@mellanox.com>
>> >
>> >Signed-off-by: Ido Schimmel <idosch@mellanox.com>
>> >---
>> > man/man8/devlink-monitor.8 |   3 +-
>> > man/man8/devlink-trap.8    | 138 +++++++++++++++++++++++++++++++++++++
>> > man/man8/devlink.8         |  11 ++-
>> > 3 files changed, 150 insertions(+), 2 deletions(-)
>> > create mode 100644 man/man8/devlink-trap.8
>> >
>> >diff --git a/man/man8/devlink-monitor.8 b/man/man8/devlink-monitor.8
>> >index 13fe641dc8f5..fffab3a4ce88 100644
>> >--- a/man/man8/devlink-monitor.8
>> >+++ b/man/man8/devlink-monitor.8
>> >@@ -21,7 +21,7 @@ command is the first in the command line and then the object list.
>> > .I OBJECT-LIST
>> > is the list of object types that we want to monitor.
>> > It may contain
>> >-.BR dev ", " port ".
>> >+.BR dev ", " port ", " trap ", " trap-group .
>> 
>> Looks like "trap-group" is a leftover here, isn't it?
>
>You get events when traps and groups are created / destroyed. See below output
>when creating a new netdevsim device:

Ah! Makes sense. Thanks!

>
>$ devlink mon trap-group
>[trap-group,new] netdevsim/netdevsim20: name l2_drops generic true
>[trap-group,new] netdevsim/netdevsim20: name l3_drops generic true
>[trap-group,new] netdevsim/netdevsim20: name buffer_drops generic true
>
>$ devlink mon trap
>[trap,new] netdevsim/netdevsim10: name source_mac_is_multicast type drop generic true action drop group l2_drops
>[trap,new] netdevsim/netdevsim10: name vlan_tag_mismatch type drop generic true action drop group l2_drops
>[trap,new] netdevsim/netdevsim10: name ingress_vlan_filter type drop generic true action drop group l2_drops
>[trap,new] netdevsim/netdevsim10: name ingress_spanning_tree_filter type drop generic true action drop group l2_drops
>[trap,new] netdevsim/netdevsim10: name port_list_is_empty type drop generic true action drop group l2_drops
>[trap,new] netdevsim/netdevsim10: name port_loopback_filter type drop generic true action drop group l2_drops
>[trap,new] netdevsim/netdevsim10: name fid_miss type exception generic false action trap group l2_drops
>[trap,new] netdevsim/netdevsim10: name blackhole_route type drop generic true action drop group l3_drops
>[trap,new] netdevsim/netdevsim10: name ttl_value_is_too_small type exception generic true action trap group l3_drops
>[trap,new] netdevsim/netdevsim10: name tail_drop type drop generic true action drop group buffer_drops

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH iproute2-next v2 0/4] Add devlink-trap support
  2019-08-13  8:31 [PATCH iproute2-next v2 0/4] Add devlink-trap support Ido Schimmel
                   ` (3 preceding siblings ...)
  2019-08-13  8:31 ` [PATCH iproute2-next v2 4/4] devlink: Add man page for devlink-trap Ido Schimmel
@ 2019-08-18 18:51 ` David Ahern
  4 siblings, 0 replies; 11+ messages in thread
From: David Ahern @ 2019-08-18 18:51 UTC (permalink / raw)
  To: Ido Schimmel, netdev; +Cc: stephen, jiri, mlxsw, Ido Schimmel

On 8/13/19 2:31 AM, Ido Schimmel wrote:
> From: Ido Schimmel <idosch@mellanox.com>
> 
> This patchset adds devlink-trap support in iproute2.
> 
> Patch #1 increases the number of options devlink can handle.
> 
> Patches #2-#3 gradually add support for all devlink-trap commands.
> 
> Patch #4 adds a man page for devlink-trap.
> 
> See individual commit messages for example usage and output.
> 
> Changes in v2:
> * Remove report option and monitor command since monitoring is done
>   using drop monitor
> 
> Ido Schimmel (4):
>   devlink: Increase number of supported options
>   devlink: Add devlink trap set and show commands
>   devlink: Add devlink trap group set and show commands
>   devlink: Add man page for devlink-trap
> 
>  devlink/devlink.c          | 448 +++++++++++++++++++++++++++++++++++--
>  man/man8/devlink-monitor.8 |   3 +-
>  man/man8/devlink-trap.8    | 138 ++++++++++++
>  man/man8/devlink.8         |  11 +-
>  4 files changed, 581 insertions(+), 19 deletions(-)
>  create mode 100644 man/man8/devlink-trap.8
> 

applied to iproute2-next. Thanks


^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-13  8:31 [PATCH iproute2-next v2 0/4] Add devlink-trap support Ido Schimmel
2019-08-13  8:31 ` [PATCH iproute2-next v2 1/4] devlink: Increase number of supported options Ido Schimmel
2019-08-13  8:31 ` [PATCH iproute2-next v2 2/4] devlink: Add devlink trap set and show commands Ido Schimmel
2019-08-13  8:44   ` Jiri Pirko
2019-08-13  8:31 ` [PATCH iproute2-next v2 3/4] devlink: Add devlink trap group " Ido Schimmel
2019-08-13 10:15   ` Jiri Pirko
2019-08-13  8:31 ` [PATCH iproute2-next v2 4/4] devlink: Add man page for devlink-trap Ido Schimmel
2019-08-13 10:20   ` Jiri Pirko
2019-08-13 10:39     ` Ido Schimmel
2019-08-13 10:52       ` Jiri Pirko
2019-08-18 18:51 ` [PATCH iproute2-next v2 0/4] Add devlink-trap support David Ahern

Netdev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netdev/0 netdev/git/0.git
	git clone --mirror https://lore.kernel.org/netdev/1 netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ https://lore.kernel.org/netdev \
		netdev@vger.kernel.org netdev@archiver.kernel.org
	public-inbox-index netdev


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netdev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox