From: "Damien Thébault" <damien.thebault@vitec.com>
To: "vivien.didelot@savoirfairelinux.com"
<vivien.didelot@savoirfairelinux.com>,
"f.fainelli@gmail.com" <f.fainelli@gmail.com>,
"andrew@lunn.ch" <andrew@lunn.ch>
Cc: "davem@davemloft.net" <davem@davemloft.net>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>
Subject: [PATCH v2] net: dsa: b53: Add BCM5389 support
Date: Thu, 31 May 2018 07:04:01 +0000 [thread overview]
Message-ID: <1ce940f7dc9c2d57c53e93341629e1981755689a.camel@vitec.com> (raw)
This patch adds support for the BCM5389 switch connected through MDIO.
Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
---
Documentation/devicetree/bindings/net/dsa/b53.txt | 1 +
drivers/net/dsa/b53/b53_common.c | 13 +++++++++++++
drivers/net/dsa/b53/b53_mdio.c | 5 ++++-
drivers/net/dsa/b53/b53_priv.h | 1 +
4 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
index 8acf51a4dfa8..47a6a7fe0b86 100644
--- a/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ b/Documentation/devicetree/bindings/net/dsa/b53.txt
@@ -10,6 +10,7 @@ Required properties:
"brcm,bcm53128"
"brcm,bcm5365"
"brcm,bcm5395"
+ "brcm,bcm5389"
"brcm,bcm5397"
"brcm,bcm5398"
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 78616787f2a3..3da5fca77cbd 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1711,6 +1711,18 @@ static const struct b53_chip_data b53_switch_chips[] = {
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
+ {
+ .chip_id = BCM5389_DEVICE_ID,
+ .dev_name = "BCM5389",
+ .vlans = 4096,
+ .enabled_ports = 0x1f,
+ .arl_entries = 4,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
{
.chip_id = BCM5395_DEVICE_ID,
.dev_name = "BCM5395",
@@ -2034,6 +2046,7 @@ int b53_switch_detect(struct b53_device *dev)
else
dev->chip_id = BCM5365_DEVICE_ID;
break;
+ case BCM5389_DEVICE_ID:
case BCM5395_DEVICE_ID:
case BCM5397_DEVICE_ID:
case BCM5398_DEVICE_ID:
diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c
index fa7556f5d4fb..a533a90e3904 100644
--- a/drivers/net/dsa/b53/b53_mdio.c
+++ b/drivers/net/dsa/b53/b53_mdio.c
@@ -285,6 +285,7 @@ static const struct b53_io_ops b53_mdio_ops = {
#define B53_BRCM_OUI_1 0x0143bc00
#define B53_BRCM_OUI_2 0x03625c00
#define B53_BRCM_OUI_3 0x00406000
+#define B53_BRCM_OUI_4 0x01410c00
static int b53_mdio_probe(struct mdio_device *mdiodev)
{
@@ -311,7 +312,8 @@ static int b53_mdio_probe(struct mdio_device *mdiodev)
*/
if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 &&
(phy_id & 0xfffffc00) != B53_BRCM_OUI_2 &&
- (phy_id & 0xfffffc00) != B53_BRCM_OUI_3) {
+ (phy_id & 0xfffffc00) != B53_BRCM_OUI_3 &&
+ (phy_id & 0xfffffc00) != B53_BRCM_OUI_4) {
dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id);
return -ENODEV;
}
@@ -360,6 +362,7 @@ static const struct of_device_id b53_of_match[] = {
{ .compatible = "brcm,bcm53125" },
{ .compatible = "brcm,bcm53128" },
{ .compatible = "brcm,bcm5365" },
+ { .compatible = "brcm,bcm5389" },
{ .compatible = "brcm,bcm5395" },
{ .compatible = "brcm,bcm5397" },
{ .compatible = "brcm,bcm5398" },
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 1187ebd79287..3b57f47d0e79 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -48,6 +48,7 @@ struct b53_io_ops {
enum {
BCM5325_DEVICE_ID = 0x25,
BCM5365_DEVICE_ID = 0x65,
+ BCM5389_DEVICE_ID = 0x89,
BCM5395_DEVICE_ID = 0x95,
BCM5397_DEVICE_ID = 0x97,
BCM5398_DEVICE_ID = 0x98,
--
2.17.0
next reply other threads:[~2018-05-31 7:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-31 7:04 Damien Thébault [this message]
2018-05-31 14:14 ` [PATCH v2] net: dsa: b53: Add BCM5389 support Florian Fainelli
2018-06-01 15:16 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1ce940f7dc9c2d57c53e93341629e1981755689a.camel@vitec.com \
--to=damien.thebault@vitec.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).