From: Martin Varghese <martinvarghesenokia@gmail.com>
To: netdev@vger.kernel.org, davem@davemloft.net, corbet@lwn.net,
scott.drennan@nokia.com, jbenc@redhat.com,
martin.varghese@nokia.com
Cc: Martin Varghese <martinvarghesenokia@gmail.com>
Subject: [PATCH net-next 2/2] Special handling for IP & MPLS.
Date: Tue, 8 Oct 2019 15:19:40 +0530 [thread overview]
Message-ID: <1da8fb9d3af8dcee1948903ae816438578365e51.1570455278.git.martinvarghesenokia@gmail.com> (raw)
In-Reply-To: <cover.1570455278.git.martinvarghesenokia@gmail.com>
From: Martin <martin.varghese@nokia.com>
Signed-off-by: Martin Varghese <martinvarghesenokia@gmail.com>
Signed-off-by: Martin Varghese <martinvarghesenokia@gmail.com>
---
Documentation/networking/bareudp.txt | 18 ++++++++
drivers/net/bareudp.c | 82 +++++++++++++++++++++++++++++++++---
include/net/bareudp.h | 1 +
include/uapi/linux/if_link.h | 1 +
4 files changed, 95 insertions(+), 7 deletions(-)
diff --git a/Documentation/networking/bareudp.txt b/Documentation/networking/bareudp.txt
index d2530e2..4de1022 100644
--- a/Documentation/networking/bareudp.txt
+++ b/Documentation/networking/bareudp.txt
@@ -9,6 +9,15 @@ The Bareudp tunnel module provides a generic L3 encapsulation tunnelling
support for tunnelling different L3 protocols like MPLS, IP, NSH etc. inside
a UDP tunnel.
+Special Handling
+----------------
+The bareudp device supports special handling for MPLS & IP as they can have
+multiple ethertypes.
+MPLS procotcol can have ethertypes 0x8847 (unicast) & 0x8847 (multicast).
+IP proctocol can have ethertypes 0x0800 (v4) & 0x866 (v6).
+This special handling can be enabled only for ethertype 0x0800 & 0x88847 with a
+flag called extended mode.
+
Usage
------
@@ -21,3 +30,12 @@ This creates a bareudp tunnel device which tunnels L3 traffic with ethertype
The device will listen on UDP port 6635 to receive traffic.
b. ip link delete bareudp0
+
+2. Device creation with extended mode enabled
+
+There are two ways to create a bareudp device for MPLS & IP with extended mode
+enabled
+
+a. ip link add dev bareudp0 type bareudp dstport 6635 ethertype 0x8847 extmode 1
+
+b. ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls
diff --git a/drivers/net/bareudp.c b/drivers/net/bareudp.c
index 7e6813a..2a688da 100644
--- a/drivers/net/bareudp.c
+++ b/drivers/net/bareudp.c
@@ -48,6 +48,7 @@ struct bareudp_dev {
struct net_device *dev; /* netdev for bareudp tunnel */
__be16 ethertype;
u16 sport_min;
+ bool ext_mode;
struct bareudp_conf conf;
struct bareudp_sock __rcu *sock4; /* IPv4 socket for bareudp tunnel */
#if IS_ENABLED(CONFIG_IPV6)
@@ -82,15 +83,64 @@ static int bareudp_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
goto drop;
bareudp = bs->bareudp;
- proto = bareudp->ethertype;
+ if (!bareudp)
+ goto drop;
+
+ if (bareudp->ethertype == htons(ETH_P_IP)) {
+ struct iphdr *iphdr;
+
+ iphdr = (struct iphdr *)(skb->data + BAREUDP_BASE_HLEN);
+ if (iphdr->version == 4) {
+ proto = bareudp->ethertype;
+ } else if (bareudp->ext_mode && (iphdr->version == 6)) {
+ proto = htons(ETH_P_IPV6);
+ } else {
+ bareudp->dev->stats.rx_dropped++;
+ goto drop;
+ }
+ } else if (bareudp->ethertype == htons(ETH_P_MPLS_UC)) {
+ struct iphdr *tunnel_hdr;
+
+ tunnel_hdr = (struct iphdr *)skb_network_header(skb);
+ if (tunnel_hdr->version == 4) {
+ if (!ipv4_is_multicast(tunnel_hdr->daddr)) {
+ proto = bareudp->ethertype;
+ } else if (bareudp->ext_mode &&
+ ipv4_is_multicast(tunnel_hdr->daddr)) {
+ proto = htons(ETH_P_MPLS_MC);
+ } else {
+ bareudp->dev->stats.rx_dropped++;
+ goto drop;
+ }
+ } else {
+ int addr_type;
+ struct ipv6hdr *tunnel_hdr_v6;
+
+ tunnel_hdr_v6 = (struct ipv6hdr *)skb_network_header(skb);
+ addr_type =
+ ipv6_addr_type((struct in6_addr *)&tunnel_hdr_v6->daddr);
+ if (!(addr_type & IPV6_ADDR_MULTICAST)) {
+ proto = bareudp->ethertype;
+ } else if (bareudp->ext_mode &&
+ (addr_type & IPV6_ADDR_MULTICAST)) {
+ proto = htons(ETH_P_MPLS_MC);
+ } else {
+ bareudp->dev->stats.rx_dropped++;
+ goto drop;
+ }
+ }
+ } else {
+ proto = bareudp->ethertype;
+ }
if (iptunnel_pull_header(skb, BAREUDP_BASE_HLEN,
- proto,
- !net_eq(bareudp->net,
- dev_net(bareudp->dev)))) {
+ proto,
+ !net_eq(bareudp->net,
+ dev_net(bareudp->dev)))) {
bareudp->dev->stats.rx_dropped++;
goto drop;
}
+
tun_dst = udp_tun_rx_dst(skb, bareudp_get_sk_family(bs), TUNNEL_KEY,
0, 0);
if (!tun_dst) {
@@ -522,10 +572,13 @@ static netdev_tx_t bareudp_xmit(struct sk_buff *skb, struct net_device *dev)
int err;
if (skb->protocol != bareudp->ethertype) {
- err = -EINVAL;
- goto tx_error;
+ if (!bareudp->ext_mode ||
+ (skb->protocol != htons(ETH_P_MPLS_MC) &&
+ skb->protocol != htons(ETH_P_IPV6))) {
+ err = -EINVAL;
+ goto tx_error;
+ }
}
-
info = skb_tunnel_info(skb);
if (unlikely(!info || !(info->mode & IP_TUNNEL_INFO_TX))) {
err = -EINVAL;
@@ -630,6 +683,7 @@ static int bareudp_change_mtu(struct net_device *dev, int new_mtu)
[IFLA_BAREUDP_PORT] = { .type = NLA_U16 },
[IFLA_BAREUDP_ETHERTYPE] = { .type = NLA_U16 },
[IFLA_BAREUDP_SRCPORT_MIN] = { .type = NLA_U16 },
+ [IFLA_BAREUDP_EXTMODE] = { .type = NLA_FLAG },
};
static int bareudp_validate(struct nlattr *tb[], struct nlattr *data[],
@@ -712,9 +766,15 @@ static int bareudp_configure(struct net *net, struct net_device *dev,
if (t)
return -EBUSY;
+ if (conf->ext_mode &&
+ (conf->ethertype != htons(ETH_P_MPLS_UC) &&
+ conf->ethertype != htons(ETH_P_IP)))
+ return -EINVAL;
+
bareudp->conf = *conf;
bareudp->ethertype = conf->ethertype;
bareudp->sport_min = conf->sport_min;
+ bareudp->ext_mode = conf->ext_mode;
err = register_netdevice(dev);
if (err)
return err;
@@ -737,6 +797,11 @@ static int bareudp2info(struct nlattr *data[], struct bareudp_conf *conf)
if (data[IFLA_BAREUDP_SRCPORT_MIN])
conf->sport_min = nla_get_u16(data[IFLA_BAREUDP_SRCPORT_MIN]);
+ if (data[IFLA_BAREUDP_EXTMODE])
+ conf->ext_mode = true;
+ else
+ conf->ext_mode = false;
+
return 0;
}
@@ -779,6 +844,7 @@ static size_t bareudp_get_size(const struct net_device *dev)
return nla_total_size(sizeof(__be16)) + /* IFLA_BAREUDP_PORT */
nla_total_size(sizeof(__be16)) + /* IFLA_BAREUDP_ETHERTYPE */
nla_total_size(sizeof(__u16)) + /* IFLA_BAREUDP_SRCPORT_MIN */
+ nla_total_size(0) + /* IFLA_BAREUDP_EXTMODE */
0;
}
@@ -792,6 +858,8 @@ static int bareudp_fill_info(struct sk_buff *skb, const struct net_device *dev)
goto nla_put_failure;
if (nla_put_u16(skb, IFLA_BAREUDP_SRCPORT_MIN, bareudp->conf.sport_min))
goto nla_put_failure;
+ if (bareudp->ext_mode && nla_put_flag(skb, IFLA_BAREUDP_EXTMODE))
+ goto nla_put_failure;
return 0;
diff --git a/include/net/bareudp.h b/include/net/bareudp.h
index 513fae6..2c121d8 100644
--- a/include/net/bareudp.h
+++ b/include/net/bareudp.h
@@ -10,6 +10,7 @@ struct bareudp_conf {
__be16 ethertype;
__be16 port;
u16 sport_min;
+ bool ext_mode;
};
struct net_device *bareudp_dev_create(struct net *net, const char *name,
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 012f7e8..2b91c872 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -586,6 +586,7 @@ enum {
IFLA_BAREUDP_PORT,
IFLA_BAREUDP_ETHERTYPE,
IFLA_BAREUDP_SRCPORT_MIN,
+ IFLA_BAREUDP_EXTMODE,
__IFLA_BAREUDP_MAX
};
--
1.8.3.1
next prev parent reply other threads:[~2019-10-08 9:52 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-08 9:48 [PATCH net-next 0/2] Bareudp Tunnel Module Martin Varghese
2019-10-08 9:48 ` [PATCH net-next 1/2] UDP tunnel encapsulation module for tunnelling different protocols like MPLS,IP,NSH etc Martin Varghese
2019-10-08 14:06 ` Jonathan Corbet
2019-10-08 14:57 ` Randy Dunlap
2019-10-08 16:04 ` Stephen Hemminger
2019-10-08 16:05 ` Stephen Hemminger
2019-10-08 16:28 ` Willem de Bruijn
2019-10-09 12:48 ` Martin Varghese
2019-10-09 14:58 ` Willem de Bruijn
2019-10-09 15:21 ` Willem de Bruijn
2019-10-09 15:42 ` Jiri Benc
2019-10-09 16:15 ` Willem de Bruijn
2019-10-18 20:03 ` Tom Herbert
2019-10-21 17:18 ` Jiri Benc
2019-10-17 13:20 ` Martin Varghese
2019-10-17 20:48 ` Willem de Bruijn
2019-10-18 8:20 ` Martin Varghese
2019-10-18 14:59 ` Willem de Bruijn
2019-10-23 2:40 ` Martin Varghese
2019-11-07 13:38 ` Martin Varghese
2019-11-07 15:53 ` Willem de Bruijn
2019-11-07 16:12 ` Martin Varghese
2019-11-07 16:35 ` Willem de Bruijn
2019-11-07 17:31 ` Jiri Benc
2019-11-07 18:59 ` Willem de Bruijn
2019-11-07 19:05 ` Jiri Benc
2019-11-07 19:13 ` Willem de Bruijn
2019-11-11 16:02 ` Martin Varghese
2019-11-11 21:45 ` Willem de Bruijn
2019-11-14 13:17 ` Martin Varghese
2019-10-08 9:49 ` Martin Varghese [this message]
2019-10-08 14:58 ` [PATCH net-next 2/2] Special handling for IP & MPLS Randy Dunlap
2019-10-08 16:09 ` Willem de Bruijn
2019-10-09 13:38 ` Martin Varghese
2019-10-09 15:06 ` Willem de Bruijn
2019-10-09 15:19 ` Willem de Bruijn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1da8fb9d3af8dcee1948903ae816438578365e51.1570455278.git.martinvarghesenokia@gmail.com \
--to=martinvarghesenokia@gmail.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=jbenc@redhat.com \
--cc=martin.varghese@nokia.com \
--cc=netdev@vger.kernel.org \
--cc=scott.drennan@nokia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).