Re: [PATCH v11 4/5] powerpc: Add flexcan device support for p1010rdb.

[Robin Holt <holt-sJ/iWh9BUns@public.gmane.org>]

On Wed, Aug 10, 2011 at 08:16:33PM +0200, Wolfgang Grandegger wrote:
> On 08/10/2011 07:01 PM, Kumar Gala wrote:
> > 
> > On Aug 10, 2011, at 11:27 AM, Robin Holt wrote:
> > 
> >> I added a simple clock source for the p1010rdb so the flexcan driver
> >> could determine a clock frequency.  The p1010 flexcan device only has
> >> an oscillator of system bus frequency divided by 2.
> >>
> >> Signed-off-by: Robin Holt <holt-sJ/iWh9BUns@public.gmane.org>
> >> Acked-by: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
> >> Acked-by: Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>,
> >> Cc: U Bhaskar-B22300 <B22300-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> >> Cc: socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org,
> >> Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
> >> Cc: PPC list <linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>
> >> Cc: Kumar Gala <galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
> >> ---
> >> arch/powerpc/platforms/85xx/Kconfig    |    2 +
> >> arch/powerpc/platforms/85xx/Makefile   |    2 +
> >> arch/powerpc/platforms/85xx/clock.c    |   52 ++++++++++++++++++++++++++++++++
> >> arch/powerpc/platforms/85xx/p1010rdb.c |    8 +++++
> >> 4 files changed, 64 insertions(+), 0 deletions(-)
> >> create mode 100644 arch/powerpc/platforms/85xx/clock.c
> > 
> > I dont understand how mpc85xx_clk_functions() ends up being associated with the frequency the flexcan is running at.
> 
> The function mpc85xx_clk_get_rate() returns "fsl_get_sys_freq() / 2" for
> Flexcan devices.
> 
> > This either seems to global or I'm missing something.
> 
> This patch extends the existing Flexcan platform driver for ARM for the
> PowerPC using the device tree. Due to the nice integration of the device
> tree (of-platform) into the platform driver and devices, the difference
> are quite small (see patches 1..3). Apart from the endianess issue, only
> the clock needs to be handled in a common way. As ARM already uses the
> clk interface, we found it straight-forward to implement it for the
> P1010, or more general for the 85xx, as well, instead of using an
> additional helper function.
> 
> > I still think the clk / freq info should be in the device tree and handled in the driver and NOT arch/powerpc platform code.
> 
> If I understand you correctly, you want the boot-loader to provide the
> relevant information by fixing up the device tree, which then can be
> handled arch-independently by the driver, right?

Marc and Wolfgang,

This is a very early swag at this which I worked up while driving home from dinner
this evening.  It works with my current config, but that includes at least one
bogus patch.  I will have to do more testing tomorrow.  For now, it is something
to ponder.

Thanks,
Robin
------------------------------------------------------------------------

flexcan: Prefer device tree clock frequency if available.

If our CAN device's device tree node has a clock-frequency property,
then use that value for the can devices clock frequency.  If not, fall
back to asking the platform/mach code for the clock frequency associated
with the flexcan device.

Too-early-to-be-signed-off-by: Robin Holt <holt-sJ/iWh9BUns@public.gmane.org>

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 662f832..d6a87c9 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -33,6 +33,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 
 #define DRV_NAME			"flexcan"
@@ -929,12 +930,25 @@ static int __devinit flexcan_probe(struct platform_device *pdev)
 	void __iomem *base;
 	resource_size_t mem_size;
 	int err, irq;
+	u32 clock_freq = 0;
 
-	clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "no clock defined\n");
-		err = PTR_ERR(clk);
-		goto failed_clock;
+	if (pdev->dev.of_node) {
+		u32 *clock_freq_p;
+
+		clk = NULL;
+		clock_freq_p = (u32 *)of_get_property(pdev->dev.of_node, "clock-frequency", NULL);
+		if (clock_freq_p)
+			clock_freq = *clock_freq_p;
+	}
+
+	if (clock_freq) {
+		clk = clk_get(&pdev->dev, NULL);
+		if (IS_ERR(clk)) {
+			dev_err(&pdev->dev, "no clock defined\n");
+			err = PTR_ERR(clk);
+			goto failed_clock;
+		}
+		clock_freq = clk_get_rate(clk);
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -967,7 +981,7 @@ static int __devinit flexcan_probe(struct platform_device *pdev)
 	dev->flags |= IFF_ECHO; /* we support local echo in hardware */
 
 	priv = netdev_priv(dev);
-	priv->can.clock.freq = clk_get_rate(clk);
+	priv->can.clock.freq = clock_freq;
 	priv->can.bittiming_const = &flexcan_bittiming_const;
 	priv->can.do_set_mode = flexcan_set_mode;
 	priv->can.do_get_berr_counter = flexcan_get_berr_counter;
@@ -1002,7 +1016,8 @@ static int __devinit flexcan_probe(struct platform_device *pdev)
  failed_map:
 	release_mem_region(mem->start, mem_size);
  failed_get:
-	clk_put(clk);
+	if (clk)
+		clk_put(clk);
  failed_clock:
 	return err;
 }
@@ -1020,7 +1035,8 @@ static int __devexit flexcan_remove(struct platform_device *pdev)
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(mem->start, resource_size(mem));
 
-	clk_put(priv->clk);
+	if (priv->clk)
+		clk_put(priv->clk);
 
 	free_candev(dev);