[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-10) ) #1 SMP Debian 3.12.6-2 (2013-12-29) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12-1-amd64 root=UUID=a273d5f8-984b-4ce4-87dd-d6885f488b80 ro quiet [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be866fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000be867000-0x00000000bea3efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bea3f000-0x00000000bee33fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bee34000-0x00000000bf15efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf15f000-0x00000000bf15ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf160000-0x00000000bf365fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf366000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970A-D3P, BIOS F3 05/24/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000043f000000 aka 17392M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd820-0x000fd82f] mapped at [ffff8800000fd820] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a91000, 0x01a91fff] PGTABLE [ 0.000000] BRK [0x01a92000, 0x01a92fff] PGTABLE [ 0.000000] BRK [0x01a93000, 0x01a93fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43ee00000-0x43effffff] [ 0.000000] [mem 0x43ee00000-0x43effffff] page 2M [ 0.000000] BRK [0x01a94000, 0x01a94fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43edfffff] [ 0.000000] [mem 0x43c000000-0x43edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff] [ 0.000000] [mem 0x400000000-0x43bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbe866fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xbe7fffff] page 2M [ 0.000000] [mem 0xbe800000-0xbe866fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbf15f000-0xbf15ffff] [ 0.000000] [mem 0xbf15f000-0xbf15ffff] page 4k [ 0.000000] BRK [0x01a95000, 0x01a95fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbf366000-0xbf7fffff] [ 0.000000] [mem 0xbf366000-0xbf3fffff] page 4k [ 0.000000] [mem 0xbf400000-0xbf7fffff] page 2M [ 0.000000] BRK [0x01a96000, 0x01a96fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100001000-0x3ffffffff] [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M [ 0.000000] [mem 0x140000000-0x3ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x363bc000-0x371d5fff] [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000bee19068 00054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000bee1eba0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130725/tbfadt-603) [ 0.000000] ACPI: DSDT 00000000bee19158 05A42 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bee2ef80 00040 [ 0.000000] ACPI: APIC 00000000bee1ec98 0008E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000bee1ed28 00044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000bee1ed70 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 00000000bee1edb0 00038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: SSDT 00000000bee1ede8 01158 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43effffff] [ 0.000000] NODE_DATA [mem 0x43eff8000-0x43effbfff] [ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042e600000-ffff88043c5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x43effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xbe866fff] [ 0.000000] node 0: [mem 0xbf15f000-0xbf15ffff] [ 0.000000] node 0: [mem 0xbf366000-0xbf7fffff] [ 0.000000] node 0: [mem 0x100001000-0x43effffff] [ 0.000000] On node 0 totalpages: 4185246 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10630 pages used for memmap [ 0.000000] DMA32 zone: 777474 pages, LIFO batch:31 [ 0.000000] Normal zone: 46536 pages used for memmap [ 0.000000] Normal zone: 3403775 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe867000-0xbea3efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbea3f000-0xbee33fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbee34000-0xbf15efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf160000-0xbf365fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043ec00000 s85888 r8192 d20608 u262144 [ 0.000000] pcpu-alloc: s85888 r8192 d20608 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128003 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-1-amd64 root=UUID=a273d5f8-984b-4ce4-87dd-d6885f488b80 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ f8000000 size 64 MB [ 0.000000] Memory: 16419228K/16740984K available (4726K kernel code, 679K rwdata, 1596K rodata, 972K init, 944K bss, 321756K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6. [ 0.000000] NR_IRQS:33024 nr_irqs:1272 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3516.208 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7032.41 BogoMIPS (lpj=14064832) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000028] Security Framework initialized [ 0.000032] AppArmor: AppArmor disabled by boot time parameter [ 0.000033] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000936] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.005763] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.007979] Mount-cache hash table entries: 256 [ 0.008135] Initializing cgroup subsys memory [ 0.008150] Initializing cgroup subsys devices [ 0.008151] Initializing cgroup subsys freezer [ 0.008153] Initializing cgroup subsys net_cls [ 0.008154] Initializing cgroup subsys blkio [ 0.008156] Initializing cgroup subsys perf_event [ 0.008175] tseg: 00bf800000 [ 0.008176] CPU: Physical Processor ID: 0 [ 0.008177] CPU: Processor Core ID: 0 [ 0.008179] mce: CPU supports 7 MCE banks [ 0.008185] LVT offset 1 assigned for vector 0xf9 [ 0.008190] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.008190] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.008190] tlb_flushall_shift: 5 [ 0.008255] Freeing SMP alternatives memory: 20K (ffffffff8199e000 - ffffffff819a3000) [ 0.008909] ACPI: Core revision 20130725 [ 0.010692] ACPI: All ACPI Tables successfully acquired [ 0.011266] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.050920] smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (fam: 15, model: 02, stepping: 00) [ 0.155558] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.155562] ... version: 0 [ 0.155563] ... bit width: 48 [ 0.155564] ... generic registers: 6 [ 0.155565] ... value mask: 0000ffffffffffff [ 0.155566] ... max period: 00007fffffffffff [ 0.155567] ... fixed-purpose events: 0 [ 0.155568] ... event mask: 000000000000003f [ 0.155769] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.155852] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 OK [ 0.222129] Brought up 6 CPUs [ 0.222132] smpboot: Total of 6 processors activated (42194.49 BogoMIPS) [ 0.229791] devtmpfs: initialized [ 0.233032] PM: Registering ACPI NVS region [mem 0xbea3f000-0xbee33fff] (4149248 bytes) [ 0.233103] PM: Registering ACPI NVS region [mem 0xbf160000-0xbf365fff] (2121728 bytes) [ 0.233298] NET: Registered protocol family 16 [ 0.233372] cpuidle: using governor ladder [ 0.233373] cpuidle: using governor menu [ 0.233406] ACPI: bus type PCI registered [ 0.233408] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.233450] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.233452] PCI: not using MMCONFIG [ 0.233453] PCI: Using configuration type 1 for base access [ 0.233454] PCI: Using configuration type 1 for extended access [ 0.233712] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.233713] mtrr: probably your BIOS does not setup all CPUs. [ 0.233713] mtrr: corrected configuration. [ 0.234147] bio: create slab at 0 [ 0.234289] ACPI: Added _OSI(Module Device) [ 0.234290] ACPI: Added _OSI(Processor Device) [ 0.234291] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.234292] ACPI: Added _OSI(Processor Aggregator Device) [ 0.234779] ACPI: EC: Look up EC in DSDT [ 0.235592] ACPI: Executed 3 blocks of module-level executable AML code [ 0.243903] ACPI: Interpreter enabled [ 0.243910] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.243914] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.243925] ACPI: (supports S0 S3 S4 S5) [ 0.243926] ACPI: Using IOAPIC for interrupt routing [ 0.244039] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.244072] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.256483] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.256559] ACPI: No dock devices found. [ 0.269107] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.269112] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.269113] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.269344] ACPI: \_SB_.PCI0.AMDN: can't evaluate _ADR (0x5) [ 0.269412] ACPI: \_SB_.PCI0.UMEM: can't evaluate _ADR (0x5) [ 0.269460] ACPI: \_SB_.PCI0.ITPM: can't evaluate _ADR (0x5) [ 0.269462] PCI host bridge to bus 0000:00 [ 0.269464] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.269465] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 0.269467] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 0.269468] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] [ 0.269470] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.269471] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.269472] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.269474] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] [ 0.269483] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.269610] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.269640] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.269680] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.269705] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.269733] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.269779] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.269806] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.269834] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.269873] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.269896] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.269924] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.269964] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.269995] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.270010] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 0.270017] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 0.270024] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 0.270031] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 0.270038] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 0.270045] pci 0000:00:11.0: reg 0x24: [mem 0xfd10b000-0xfd10b3ff] [ 0.270135] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.270145] pci 0000:00:12.0: reg 0x10: [mem 0xfd10a000-0xfd10afff] [ 0.270219] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.270246] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.270260] pci 0000:00:12.2: reg 0x10: [mem 0xfd109000-0xfd1090ff] [ 0.270319] pci 0000:00:12.2: supports D1 D2 [ 0.270321] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.270361] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.270386] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.270396] pci 0000:00:13.0: reg 0x10: [mem 0xfd108000-0xfd108fff] [ 0.270470] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.270497] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.270510] pci 0000:00:13.2: reg 0x10: [mem 0xfd107000-0xfd1070ff] [ 0.270570] pci 0000:00:13.2: supports D1 D2 [ 0.270571] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.270612] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.270638] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.270737] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.270753] pci 0000:00:14.2: reg 0x10: [mem 0xfd100000-0xfd103fff 64bit] [ 0.270828] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.270867] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.270888] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.270987] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.271046] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.271067] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.271077] pci 0000:00:14.5: reg 0x10: [mem 0xfd106000-0xfd106fff] [ 0.271152] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.271176] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.271186] pci 0000:00:16.0: reg 0x10: [mem 0xfd105000-0xfd105fff] [ 0.271261] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.271288] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.271302] pci 0000:00:16.2: reg 0x10: [mem 0xfd104000-0xfd1040ff] [ 0.271362] pci 0000:00:16.2: supports D1 D2 [ 0.271363] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.271403] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.271428] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.271487] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.271541] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.271596] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.271654] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.271709] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.271806] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000 [ 0.271814] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff] [ 0.271823] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.271831] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.271837] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.271843] pci 0000:01:00.0: reg 0x30: [mem 0xfd000000-0xfd07ffff pref] [ 0.271910] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300 [ 0.271918] pci 0000:01:00.1: reg 0x10: [mem 0xfd080000-0xfd083fff] [ 0.281011] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.281015] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.281017] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfd0fffff] [ 0.281020] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.281060] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.281072] pci 0000:02:00.0: reg 0x10: [mem 0xfde00000-0xfde00fff 64bit] [ 0.281122] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.289027] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.289031] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.289086] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.289099] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.289117] pci 0000:03:00.0: reg 0x18: [mem 0xfdd00000-0xfdd00fff 64bit] [ 0.289129] pci 0000:03:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref] [ 0.289179] pci 0000:03:00.0: supports D1 D2 [ 0.289180] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.289206] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.296996] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.296999] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.297002] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.297005] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.297051] pci 0000:04:00.0: [1131:7164] type 00 class 0x048000 [ 0.297070] pci 0000:04:00.0: reg 0x10: [mem 0xfd800000-0xfdbfffff 64bit] [ 0.297085] pci 0000:04:00.0: reg 0x18: [mem 0xfd400000-0xfd7fffff 64bit] [ 0.297161] pci 0000:04:00.0: supports D1 D2 [ 0.297163] pci 0000:04:00.0: PME# supported from D0 D1 D2 [ 0.304990] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.304994] pci 0000:00:0a.0: bridge window [mem 0xfd400000-0xfdbfffff] [ 0.305036] pci 0000:05:07.0: [1113:1211] type 00 class 0x020000 [ 0.305053] pci 0000:05:07.0: reg 0x10: [io 0xc000-0xc0ff] [ 0.305063] pci 0000:05:07.0: reg 0x14: [mem 0xfdc10000-0xfdc100ff] [ 0.305105] pci 0000:05:07.0: reg 0x30: [mem 0xfdc00000-0xfdc0ffff pref] [ 0.305134] pci 0000:05:07.0: supports D1 D2 [ 0.305135] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305190] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 0.305193] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.305196] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.305199] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) [ 0.305200] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 0.305202] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) [ 0.305203] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.305205] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.305206] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.305207] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.305522] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.305573] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.305625] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.305676] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0 [ 0.305717] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0 [ 0.305750] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0 [ 0.305782] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0 [ 0.305815] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0 [ 0.305881] ACPI: \_SB_.PCI0: notify handler is installed [ 0.305902] Found 1 acpi root devices [ 0.305975] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.305977] vgaarb: loaded [ 0.305978] vgaarb: bridge control possible 0000:01:00.0 [ 0.306009] PCI: Using ACPI for IRQ routing [ 0.312306] PCI: pci_cache_line_size set to 64 bytes [ 0.312355] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.312356] e820: reserve RAM buffer [mem 0xbe867000-0xbfffffff] [ 0.312357] e820: reserve RAM buffer [mem 0xbf160000-0xbfffffff] [ 0.312358] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.312359] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff] [ 0.312432] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.312435] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.314477] Switched to clocksource hpet [ 0.315829] pnp: PnP ACPI init [ 0.315837] ACPI: bus type PNP registered [ 0.315898] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.315901] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.316107] system 00:01: [io 0x040b] has been reserved [ 0.316109] system 00:01: [io 0x04d6] has been reserved [ 0.316111] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.316112] system 00:01: [io 0x0c14] has been reserved [ 0.316114] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 0.316115] system 00:01: [io 0x0c52] has been reserved [ 0.316117] system 00:01: [io 0x0c6c] has been reserved [ 0.316118] system 00:01: [io 0x0c6f] has been reserved [ 0.316120] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.316121] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.316123] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 0.316124] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 0.316125] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 0.316127] system 00:01: [io 0x0800-0x089f] could not be reserved [ 0.316129] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.316130] system 00:01: [io 0x0900-0x090f] has been reserved [ 0.316132] system 00:01: [io 0x0910-0x091f] has been reserved [ 0.316134] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 0.316136] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.316138] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.316139] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.316141] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.316144] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.316145] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.316147] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved [ 0.316149] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.316264] system 00:02: [io 0x0220-0x0227] has been reserved [ 0.316266] system 00:02: [io 0x0228-0x0237] has been reserved [ 0.316267] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.316269] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.316465] pnp 00:03: [dma 0 disabled] [ 0.316498] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.316507] pnp 00:04: [dma 4] [ 0.316520] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.316539] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.316557] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.316595] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.316597] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.316616] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.316642] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.316742] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.316830] system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.316832] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.316936] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.316938] pnp: PnP ACPI: found 13 devices [ 0.316939] ACPI: bus type PNP unregistered [ 0.323035] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.323038] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.323040] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfd0fffff] [ 0.323043] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.323045] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.323048] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.323051] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.323053] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.323055] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.323057] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.323060] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.323062] pci 0000:00:0a.0: bridge window [mem 0xfd400000-0xfdbfffff] [ 0.323065] pci 0000:00:14.4: PCI bridge to [bus 05] [ 0.323067] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.323071] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.323077] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 0.323079] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 0.323080] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 0.323081] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 0.323083] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 0.323084] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 0.323086] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff] [ 0.323087] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.323088] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfd0fffff] [ 0.323090] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.323091] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.323092] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.323094] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.323095] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.323096] pci_bus 0000:04: resource 1 [mem 0xfd400000-0xfdbfffff] [ 0.323098] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.323099] pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.323100] pci_bus 0000:05: resource 4 [io 0x0000-0x03af] [ 0.323102] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7] [ 0.323103] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df] [ 0.323104] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff] [ 0.323105] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff] [ 0.323107] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff] [ 0.323108] pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff] [ 0.323188] NET: Registered protocol family 2 [ 0.323466] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.323874] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.324041] TCP: Hash tables configured (established 131072 bind 65536) [ 0.324065] TCP: reno registered [ 0.324083] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.324144] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.324292] NET: Registered protocol family 1 [ 0.646409] pci 0000:01:00.0: Boot video device [ 0.646625] PCI: CLS 64 bytes, default 64 [ 0.646654] Unpacking initramfs... [ 0.863943] Freeing initrd memory: 14440K (ffff8800363bc000 - ffff8800371d6000) [ 0.864306] PCI-DMA: Disabling AGP. [ 0.864374] PCI-DMA: aperture base @ f8000000 size 65536 KB [ 0.864375] init_memory_mapping: [mem 0xf8000000-0xfbffffff] [ 0.864377] [mem 0xf8000000-0xfbffffff] page 2M [ 0.864384] PCI-DMA: using GART IOMMU. [ 0.864386] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.868899] perf: AMD NB counters detected [ 0.868922] LVT offset 0 assigned for vector 0x400 [ 0.868941] perf: AMD IBS detected (0x000000ff) [ 0.868975] microcode: CPU0: patch_level=0x06000822 [ 0.868982] microcode: CPU1: patch_level=0x06000822 [ 0.868990] microcode: CPU2: patch_level=0x06000822 [ 0.868997] microcode: CPU3: patch_level=0x06000822 [ 0.869001] microcode: CPU4: patch_level=0x06000822 [ 0.869006] microcode: CPU5: patch_level=0x06000822 [ 0.869069] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.869301] audit: initializing netlink socket (disabled) [ 0.869315] type=2000 audit(1390461592.756:1): initialized [ 0.878684] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.879658] VFS: Disk quotas dquot_6.5.2 [ 0.879681] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.879744] msgmni has been set to 32225 [ 0.879999] alg: No test for stdrng (krng) [ 0.880023] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.880062] io scheduler noop registered [ 0.880064] io scheduler deadline registered [ 0.880086] io scheduler cfq registered (default) [ 0.880360] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.880371] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.880406] GHES: HEST is not enabled! [ 0.880444] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.900773] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.901061] Linux agpgart interface v0.103 [ 0.901123] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.901470] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.901476] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.901588] mousedev: PS/2 mouse device common for all mice [ 0.901614] rtc_cmos 00:05: RTC can wake from S4 [ 0.901704] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.901724] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.901733] AMD IOMMUv2 driver by Joerg Roedel [ 0.901734] AMD IOMMUv2 functionality not available on this system [ 0.901795] TCP: cubic registered [ 0.901860] NET: Registered protocol family 10 [ 0.902003] mip6: Mobile IPv6 [ 0.902004] NET: Registered protocol family 17 [ 0.902007] mpls_gso: MPLS GSO support [ 0.902382] registered taskstats version 1 [ 0.903410] rtc_cmos 00:05: setting system clock to 2014-01-23 07:19:53 UTC (1390461593) [ 0.903443] PM: Hibernation image not present or could not be loaded. [ 0.904021] Freeing unused kernel memory: 972K (ffffffff818ab000 - ffffffff8199e000) [ 0.904023] Write protecting the kernel read-only data: 8192k [ 0.906309] Freeing unused kernel memory: 1408K (ffff8800014a0000 - ffff880001600000) [ 0.907026] Freeing unused kernel memory: 452K (ffff88000178f000 - ffff880001800000) [ 0.915094] systemd-udevd[78]: starting version 204 [ 0.927238] ACPI: bus type USB registered [ 0.927265] usbcore: registered new interface driver usbfs [ 0.927275] usbcore: registered new interface driver hub [ 0.928722] SCSI subsystem initialized [ 0.932320] libata version 3.00 loaded. [ 0.932522] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.932535] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.932541] pcieport 0000:00:09.0: driver skip pci_set_master, fix it! [ 0.932808] r8169 0000:03:00.0: irq 72 for MSI/MSI-X [ 0.932985] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90001820000, 94:de:80:bf:e9:8b, XID 0c900800 IRQ 72 [ 0.932988] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.933068] usbcore: registered new device driver usb [ 0.933167] ahci 0000:00:11.0: version 3.0 [ 0.933343] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.933346] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 0.933759] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.933768] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 0.933857] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X [ 0.933914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.934155] ehci-pci: EHCI PCI platform driver [ 0.934322] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.934492] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.934494] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.934496] usb usb1: Product: xHCI Host Controller [ 0.934498] usb usb1: Manufacturer: Linux 3.12-1-amd64 xhci_hcd [ 0.934500] usb usb1: SerialNumber: 0000:02:00.0 [ 0.934570] ohci-pci: OHCI PCI platform driver [ 0.934648] hub 1-0:1.0: USB hub found [ 0.934657] hub 1-0:1.0: 1 port detected [ 0.934758] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.934761] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 0.934806] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.934808] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.934810] usb usb2: Product: xHCI Host Controller [ 0.934812] usb usb2: Manufacturer: Linux 3.12-1-amd64 xhci_hcd [ 0.934814] usb usb2: SerialNumber: 0000:02:00.0 [ 0.934935] hub 2-0:1.0: USB hub found [ 0.934944] hub 2-0:1.0: 4 ports detected [ 0.935295] scsi0 : ahci [ 0.935596] scsi1 : ahci [ 0.935667] scsi2 : ahci [ 0.935744] scsi3 : ahci [ 0.935807] scsi4 : ahci [ 0.935897] scsi5 : ahci [ 0.935941] ata1: SATA max UDMA/133 abar m1024@0xfd10b000 port 0xfd10b100 irq 19 [ 0.935944] ata2: SATA max UDMA/133 abar m1024@0xfd10b000 port 0xfd10b180 irq 19 [ 0.935946] ata3: SATA max UDMA/133 abar m1024@0xfd10b000 port 0xfd10b200 irq 19 [ 0.935949] ata4: SATA max UDMA/133 abar m1024@0xfd10b000 port 0xfd10b280 irq 19 [ 0.935951] ata5: SATA max UDMA/133 abar m1024@0xfd10b000 port 0xfd10b300 irq 19 [ 0.935954] ata6: SATA max UDMA/133 abar m1024@0xfd10b000 port 0xfd10b380 irq 19 [ 0.936069] ehci-pci 0000:00:12.2: EHCI Host Controller [ 0.936076] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 0.936087] QUIRK: Enable AMD PLL fix [ 0.936089] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.936099] ehci-pci 0000:00:12.2: debug port 1 [ 0.936131] ehci-pci 0000:00:12.2: irq 17, io mem 0xfd109000 [ 0.940175] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 0.940761] 8139too 0000:05:07.0 eth1: RealTek RTL8139 at 0xffffc90011bcc000, 00:04:e2:12:1c:ea, IRQ 21 [ 0.946006] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.946050] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.946052] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.946054] usb usb3: Product: EHCI Host Controller [ 0.946056] usb usb3: Manufacturer: Linux 3.12-1-amd64 ehci_hcd [ 0.946058] usb usb3: SerialNumber: 0000:00:12.2 [ 0.946218] hub 3-0:1.0: USB hub found [ 0.946227] hub 3-0:1.0: 5 ports detected [ 0.946495] ehci-pci 0000:00:13.2: EHCI Host Controller [ 0.946507] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 0.946511] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.946521] ehci-pci 0000:00:13.2: debug port 1 [ 0.946543] ehci-pci 0000:00:13.2: irq 17, io mem 0xfd107000 [ 0.958033] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.958134] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.958137] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.958139] usb usb4: Product: EHCI Host Controller [ 0.958140] usb usb4: Manufacturer: Linux 3.12-1-amd64 ehci_hcd [ 0.958141] usb usb4: SerialNumber: 0000:00:13.2 [ 0.958238] hub 4-0:1.0: USB hub found [ 0.958252] hub 4-0:1.0: 5 ports detected [ 0.958465] ehci-pci 0000:00:16.2: EHCI Host Controller [ 0.958469] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 0.958472] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.958480] ehci-pci 0000:00:16.2: debug port 1 [ 0.958500] ehci-pci 0000:00:16.2: irq 17, io mem 0xfd104000 [ 0.970058] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 0.970137] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.970139] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.970141] usb usb5: Product: EHCI Host Controller [ 0.970142] usb usb5: Manufacturer: Linux 3.12-1-amd64 ehci_hcd [ 0.970143] usb usb5: SerialNumber: 0000:00:16.2 [ 0.970233] hub 5-0:1.0: USB hub found [ 0.970245] hub 5-0:1.0: 4 ports detected [ 0.970448] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 0.970453] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 0.970476] ohci-pci 0000:00:12.0: irq 18, io mem 0xfd10a000 [ 1.029982] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.029984] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.029986] usb usb6: Product: OHCI PCI host controller [ 1.029987] usb usb6: Manufacturer: Linux 3.12-1-amd64 ohci_hcd [ 1.029988] usb usb6: SerialNumber: 0000:00:12.0 [ 1.030076] hub 6-0:1.0: USB hub found [ 1.030084] hub 6-0:1.0: 5 ports detected [ 1.030222] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.030227] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 1.030239] ohci-pci 0000:00:13.0: irq 18, io mem 0xfd108000 [ 1.089918] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.089920] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.089921] usb usb7: Product: OHCI PCI host controller [ 1.089923] usb usb7: Manufacturer: Linux 3.12-1-amd64 ohci_hcd [ 1.089924] usb usb7: SerialNumber: 0000:00:13.0 [ 1.090009] hub 7-0:1.0: USB hub found [ 1.090016] hub 7-0:1.0: 5 ports detected [ 1.090145] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.090149] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 1.090160] ohci-pci 0000:00:14.5: irq 18, io mem 0xfd106000 [ 1.149873] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.149875] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.149876] usb usb8: Product: OHCI PCI host controller [ 1.149877] usb usb8: Manufacturer: Linux 3.12-1-amd64 ohci_hcd [ 1.149879] usb usb8: SerialNumber: 0000:00:14.5 [ 1.149961] hub 8-0:1.0: USB hub found [ 1.149967] hub 8-0:1.0: 2 ports detected [ 1.150078] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.150082] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 1.150092] ohci-pci 0000:00:16.0: irq 18, io mem 0xfd105000 [ 1.209844] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.209847] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.209849] usb usb9: Product: OHCI PCI host controller [ 1.209850] usb usb9: Manufacturer: Linux 3.12-1-amd64 ohci_hcd [ 1.209851] usb usb9: SerialNumber: 0000:00:16.0 [ 1.209936] hub 9-0:1.0: USB hub found [ 1.209944] hub 9-0:1.0: 4 ports detected [ 1.245819] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.253828] ata5: SATA link down (SStatus 0 SControl 300) [ 1.253868] ata6: SATA link down (SStatus 0 SControl 300) [ 1.262996] usb 1-1: New USB device found, idVendor=2109, idProduct=3431 [ 1.262999] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.263001] usb 1-1: Product: USB2.0 Hub [ 1.263429] hub 1-1:1.0: USB hub found [ 1.263524] hub 1-1:1.0: 4 ports detected [ 1.425671] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.425691] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.425708] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.425725] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.426210] ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 1.426212] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.426285] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 1.426288] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.426539] ata1.00: ATA-8: SanDisk SDSSDHP128G, X2306RL, max UDMA/133 [ 1.426541] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.426793] ata3.00: configured for UDMA/133 [ 1.426839] ata2.00: configured for UDMA/133 [ 1.427276] ata4.00: ATAPI: ATAPI iHAS324 Y, BL1Y, max UDMA/100 [ 1.427430] ata1.00: configured for UDMA/133 [ 1.427557] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDHP1 X230 PQ: 0 ANSI: 5 [ 1.427744] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 80.0 PQ: 0 ANSI: 5 [ 1.427879] scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 80.0 PQ: 0 ANSI: 5 [ 1.429123] ata4.00: configured for UDMA/100 [ 1.430910] scsi 3:0:0:0: CD-ROM ATAPI iHAS324 Y BL1Y PQ: 0 ANSI: 5 [ 1.434995] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.435025] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 1.435029] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 1.435040] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 1.435042] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.435101] sd 0:0:0:0: [sda] Write Protect is off [ 1.435104] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.435114] sd 2:0:0:0: [sdc] Write Protect is off [ 1.435116] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.435126] sd 1:0:0:0: [sdb] Write Protect is off [ 1.435128] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.435133] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.435148] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.435159] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.435675] sda: sda1 [ 1.435795] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.435797] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.435882] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.435918] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.437160] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.437201] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.437237] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.437274] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 1.490606] sdc: sdc1 sdc2 [ 1.490896] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.492053] sdb: sdb1 sdb2 [ 1.492299] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.541695] usb 1-1.1: new low-speed USB device number 3 using xhci_hcd [ 1.623456] platform microcode: firmware: direct-loading firmware amd-ucode/microcode_amd_fam15h.bin [ 1.626436] device-mapper: uevent: version 1.0.3 [ 1.626502] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 1.632063] PM: Starting manual resume from disk [ 1.632065] PM: Hibernation image partition 8:17 present [ 1.632066] PM: Looking for hibernation image. [ 1.632182] PM: Image not found (code -22) [ 1.632184] PM: Hibernation image not present or could not be loaded. [ 1.639695] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.809802] systemd-udevd[411]: starting version 204 [ 1.862820] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 1.862827] ACPI: Power Button [PWRB] [ 1.862993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.862996] ACPI: Power Button [PWRF] [ 1.863781] ACPI: acpi_idle registered with cpuidle [ 1.865297] tsc: Refined TSC clocksource calibration: 3516.188 MHz [ 1.868024] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.869655] media: Linux media interface: v0.10 [ 1.871791] Linux video capture interface: v2.00 [ 1.879732] [drm] Initialized drm 1.1.0 20060810 [ 1.879905] saa7164 driver loaded [ 1.879987] pcieport 0000:00:0a.0: driver skip pci_set_master, fix it! [ 1.880578] CORE saa7164[0]: subsystem: 0070:8940, board: Hauppauge WinTV-HVR2200 [card=9,autodetected] [ 1.880583] saa7164[0]/0: found at 0000:04:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfd800000 [ 1.885771] wmi: Mapper loaded [ 1.890877] systemd-udevd[450]: renamed network interface eth0 to eth6 [ 1.895100] EDAC MC: Ver: 3.0.0 [ 1.895900] MCE: In-kernel MCE decoding enabled. [ 1.897849] AMD64 EDAC driver v3.4.0 [ 1.898460] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 1.898850] pcieport 0000:00:02.0: driver skip pci_set_master, fix it! [ 1.899182] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8280b1 [ 1.899185] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8) [ 1.899187] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 1.900135] Error: Driver 'pcspkr' is already registered, aborting... [ 1.900572] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 1.906763] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 1.906798] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 1.906821] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 1.906846] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 1.906869] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 1.906893] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 1.906915] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 1.906939] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 1.907238] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.907276] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb20 [ 1.909335] EDAC amd64: DRAM ECC disabled. [ 1.909386] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 1.909386] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 1.909386] (Note that use of the override may cause unknown side effects.) [ 1.909746] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 1.909788] sp5100_tco: PCI Revision ID: 0x42 [ 1.909832] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 1.909852] sp5100_tco: Last reboot was not triggered by watchdog. [ 1.909882] sp5100_tco: initialized (0xffffc90001872b00). heartbeat=60 sec (nowayout=0) [ 1.927727] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 1.932359] alg: No test for crc32 (crc32-pclmul) [ 1.940239] kvm: Nested Virtualization enabled [ 1.940244] kvm: Nested Paging enabled [ 1.941607] md: bind [ 1.964425] md: bind [ 1.966264] md: raid1 personality registered for level 1 [ 1.966533] md/raid1:md0: active with 2 out of 2 mirrors [ 1.966613] created bitmap (22 pages) for device md0 [ 1.966977] md0: bitmap initialized from disk: read 2 pages, set 0 of 44583 bits [ 1.978680] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 1.978682] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN [ 1.978778] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 1.978780] nouveau [ VBIOS][0000:01:00.0] version 70.18.5f.00.06 [ 1.979013] nouveau [ PFB][0000:01:00.0] RAM type: DDR3 [ 1.979015] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB [ 1.979016] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags [ 1.979685] md0: detected capacity change from 0 to 2991867756544 [ 1.985049] md0: unknown partition table [ 1.999120] systemd-udevd[453]: renamed network interface eth1 to eth5 [ 2.045224] saa7164_downloadfirmware() no first image [ 2.045303] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 2.056245] saa7164 0000:04:00.0: firmware: direct-loading firmware NXP7164-2010-03-10.1.fw [ 2.056254] saa7164_downloadfirmware() firmware read 4019072 bytes. [ 2.056257] saa7164_downloadfirmware() firmware loaded. [ 2.056259] Firmware file header part 1: [ 2.056261] .FirmwareSize = 0x0 [ 2.056263] .BSLSize = 0x0 [ 2.056265] .Reserved = 0x3d538 [ 2.056267] .Version = 0x3 [ 2.056270] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 [ 2.056277] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 [ 2.056279] saa7164_downloadfirmware() BSLSize = 0x0 [ 2.056281] saa7164_downloadfirmware() Reserved = 0x0 [ 2.056283] saa7164_downloadfirmware() Version = 0x1661c00 [ 2.876553] Switched to clocksource tsc [ 3.260222] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 3.260228] nouveau [ PTHERM][0000:01:00.0] fan management: disabled [ 3.260231] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 3.260398] [TTM] Zone kernel: Available graphics memory: 8251236 kiB [ 3.260400] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.260401] [TTM] Initializing pool allocator [ 3.260404] [TTM] Initializing DMA pool allocator [ 18.669471] it87: Found IT8728F chip at 0x228, revision 1 [ 18.669486] it87: Beeping is supported [ 19.975949] 8139too 0000:05:07.0 eth5: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 83.447039] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw [ 83.564436] r8169 0000:03:00.0 eth6: link down [ 83.564468] r8169 0000:03:00.0 eth6: link down [ 83.564484] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready [ 86.701238] r8169 0000:03:00.0 eth6: link up [ 86.701249] IPv6: ADDRCONF(NETDEV_CHANGE): eth6: link becomes ready [ 866.212244] ------------[ cut here ]------------ [ 866.212258] WARNING: CPU: 5 PID: 0 at /build/linux-xS3nxO/linux-3.12.6/net/sched/sch_generic.c:264 dev_watchdog+0x226/0x230() [ 866.212262] NETDEV WATCHDOG: eth6 (r8169): transmit queue 0 timed out [ 866.212264] Modules linked in: bnep rfcomm bluetooth rfkill vhost_net vhost macvtap macvlan tun xt_multiport ipt_MASQUERADE xt_CHECKSUM iptable_mangle bridge stp llc ebtable_nat ebtables parport_pc ppdev lp parport binfmt_misc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_REDIRECT iptable_nat nf_nat_ipv4 nf_nat ipt_REJECT xt_tcpudp xt_LOG xt_mac nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables x_tables fuse it87 hwmon_vid loop tda18271 tda10048 joydev hid_generic snd_hda_codec_hdmi usbhid hid raid1 evdev kvm_amd md_mod kvm crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 ablk_helper cryptd lrw sp5100_tco gf128mul glue_helper fam15h_power k10temp psmouse pcspkr serio_raw nouveau edac_mce_amd edac_core i2c_piix4 snd_hda_codec_via mxm_wmi wmi video ttm drm_kms_helper saa7164 snd_hda_intel tveeprom dvb_core drm snd_hda_codec v4l2_common videodev snd_hwdep media snd_pcm i2c_algo_bit acpi_cpufreq snd_page_alloc i2c_core snd_timer snd processor soundcore button thermal_sys ext4 crc16 mbcache jbd2 dm_mod sg sd_mod sr_mod cdrom crc_t10dif crct10dif_common 8139too ohci_pci ohci_hcd ehci_pci ehci_hcd xhci_hcd ahci libahci r8169 mii libata scsi_mod usbcore usb_common [ 866.212380] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 3.12-1-amd64 #1 Debian 3.12.6-2 [ 866.212383] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970A-D3P, BIOS F3 05/24/2013 [ 866.212386] 0000000000000009 ffffffff8148c9d5 ffff88043ed43df0 ffffffff8105b572 [ 866.212392] 0000000000000000 ffff88043ed43e40 0000000000000001 0000000000000005 [ 866.212397] ffff88042a4d4000 ffffffff8105b5d7 ffffffff81742f20 ffff880400000030 [ 866.212402] Call Trace: [ 866.212405] [] ? dump_stack+0x41/0x51 [ 866.212419] [] ? warn_slowpath_common+0x72/0x90 [ 866.212425] [] ? warn_slowpath_fmt+0x47/0x50 [ 866.212437] [] ? dev_watchdog+0x226/0x230 [ 866.212442] [] ? dev_graft_qdisc+0x70/0x70 [ 866.212447] [] ? call_timer_fn+0x2c/0x100 [ 866.212452] [] ? dev_graft_qdisc+0x70/0x70 [ 866.212457] [] ? run_timer_softirq+0x1f9/0x2b0 [ 866.212466] [] ? __do_softirq+0xed/0x230 [ 866.212476] [] ? call_softirq+0x1c/0x30 [ 866.212482] [] ? do_softirq+0x55/0x90 [ 866.212487] [] ? irq_exit+0x95/0xa0 [ 866.212493] [] ? smp_apic_timer_interrupt+0x3b/0x50 [ 866.212498] [] ? apic_timer_interrupt+0x6d/0x80 [ 866.212500] [] ? cpuidle_enter_state+0x4a/0xc0 [ 866.212514] [] ? cpuidle_idle_call+0xb6/0x1f0 [ 866.212520] [] ? arch_cpu_idle+0x5/0x30 [ 866.212525] [] ? cpu_startup_entry+0xde/0x270 [ 866.212531] [] ? start_secondary+0x1d4/0x230 [ 866.212534] ---[ end trace cd522523d6e120ac ]--- [ 866.230696] r8169 0000:03:00.0 eth6: link up [ 1729.580858] r8169 0000:03:00.0 eth6: link up