From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
Mugunthan V N <mugunthanvnm@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>,
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH 7/7] Documentation: DT: net: cpsw: remove no_bd_ram property
Date: Thu, 1 Dec 2016 17:34:32 -0600 [thread overview]
Message-ID: <20161201233432.6182-8-grygorii.strashko@ti.com> (raw)
In-Reply-To: <20161201233432.6182-1-grygorii.strashko@ti.com>
Even if no_bd_ram property is described in TI CPSW bindings the
support for it has never been introduced in CPSW driver, so there are
no real users of it. Hence, remove no_bd_ram property.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
Documentation/devicetree/bindings/net/cpsw.txt | 3 ---
arch/arm/boot/dts/am33xx.dtsi | 1 -
arch/arm/boot/dts/am4372.dtsi | 1 -
arch/arm/boot/dts/dm814x.dtsi | 1 -
arch/arm/boot/dts/dra7.dtsi | 1 -
5 files changed, 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index b99d196..4e8b673 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -25,7 +25,6 @@ Required properties:
Optional properties:
- ti,hwmods : Must be "cpgmac0"
-- no_bd_ram : Must be 0 or 1
- dual_emac : Specifies Switch to act as Dual EMAC
- syscon : Phandle to the system control device node, which is
the control module device of the am33x
@@ -73,7 +72,6 @@ Examples:
cpdma_channels = <8>;
ale_entries = <1024>;
bd_ram_size = <0x2000>;
- no_bd_ram = <0>;
rx_descs = <64>;
mac_control = <0x20>;
slaves = <2>;
@@ -102,7 +100,6 @@ Examples:
cpdma_channels = <8>;
ale_entries = <1024>;
bd_ram_size = <0x2000>;
- no_bd_ram = <0>;
rx_descs = <64>;
mac_control = <0x20>;
slaves = <2>;
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 194d884..7af5520 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -777,7 +777,6 @@
cpdma_channels = <8>;
ale_entries = <1024>;
bd_ram_size = <0x2000>;
- no_bd_ram = <0>;
mac_control = <0x20>;
slaves = <2>;
active_slave = <0>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index a275fa9..4f651be 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -668,7 +668,6 @@
cpdma_channels = <8>;
ale_entries = <1024>;
bd_ram_size = <0x2000>;
- no_bd_ram = <0>;
mac_control = <0x20>;
slaves = <2>;
active_slave = <0>;
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index ff90a6c..614a4ba 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -508,7 +508,6 @@
cpdma_channels = <8>;
ale_entries = <1024>;
bd_ram_size = <0x2000>;
- no_bd_ram = <0>;
mac_control = <0x20>;
slaves = <2>;
active_slave = <0>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d4fcd68..cf7325d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1706,7 +1706,6 @@
cpdma_channels = <8>;
ale_entries = <1024>;
bd_ram_size = <0x2000>;
- no_bd_ram = <0>;
mac_control = <0x20>;
slaves = <2>;
active_slave = <0>;
--
2.10.1
prev parent reply other threads:[~2016-12-01 23:34 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-01 23:34 [PATCH 0/7] net: ethernet: ti: cpsw: support placing CPDMA descriptors into DDR Grygorii Strashko
2016-12-01 23:34 ` [PATCH 1/7] net: ethernet: ti: cpdma: am437x: allow descs to be plased in ddr Grygorii Strashko
2016-12-03 20:34 ` David Miller
2016-12-05 17:57 ` Grygorii Strashko
2016-12-01 23:34 ` [PATCH 2/7] net: ethernet: ti: cpdma: fix desc re-queuing Grygorii Strashko
2016-12-02 11:03 ` Ivan Khoronzhuk
2016-12-02 16:45 ` Grygorii Strashko
2016-12-02 23:28 ` Ivan Khoronzhuk
2016-12-05 18:22 ` Grygorii Strashko
2016-12-01 23:34 ` [PATCH 3/7] net: ethernet: ti: cpdma: minimize number of parameters in cpdma_desc_pool_create/destroy() Grygorii Strashko
2016-12-01 23:34 ` [PATCH 4/7] net: ethernet: ti: cpdma: use devm_ioremap Grygorii Strashko
2016-12-01 23:34 ` [PATCH 5/7] Documentation: DT: net: cpsw: allow to specify descriptors pool size Grygorii Strashko
2016-12-02 11:28 ` Ivan Khoronzhuk
2016-12-02 17:21 ` Grygorii Strashko
2016-12-07 19:41 ` Grygorii Strashko
2016-12-02 17:22 ` Grygorii Strashko
2016-12-03 0:37 ` Ivan Khoronzhuk
2016-12-01 23:34 ` [PATCH 6/7] net: ethernet: ti: cpsw: add support for descs_pool_size dt property Grygorii Strashko
2016-12-01 23:34 ` Grygorii Strashko [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161201233432.6182-8-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=davem@davemloft.net \
--cc=ivan.khoronzhuk@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).