From mboxrd@z Thu Jan 1 00:00:00 1970 From: Antoine Tenart Subject: [PATCH net-next 0/3] net: mvpp2: optional PHYs and GoP link irq Date: Thu, 31 Aug 2017 09:12:53 +0200 Message-ID: <20170831071256.18416-1-antoine.tenart@free-electrons.com> Cc: Antoine Tenart , andrew@lunn.ch, gregory.clement@free-electrons.com, thomas.petazzoni@free-electrons.com, nadavh@marvell.com, linux@armlinux.org.uk, linux-kernel@vger.kernel.org, mw@semihalf.com, stefanc@marvell.com, miquel.raynal@free-electrons.com, netdev@vger.kernel.org To: davem@davemloft.net Return-path: Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org Hi all, This series aims at make the driver work when no PHY is connected between a port and the physical layer and not described as a fixed-phy. This is useful for some usecases such as when a switch is connected directly to the serdes lanes. It can also be used for SFP ports on the 7k-db and 8k-db while waiting for the phylink support to land in (which should be part of another series). This series makes the phy optional in the PPv2 driver, and then adds the support for the GoP port link interrupt to handle link status changes on such ports. This was tested using the SFP ports on the 7k-db and 8k-db boards. Thanks! Antoine Antoine Tenart (3): net: mvpp2: make the phy optional net: mvpp2: use the GoP interrupt for link status changes Documentation/bindings: net: marvell-pp2: add the link interrupt .../devicetree/bindings/net/marvell-pp2.txt | 2 +- drivers/net/ethernet/marvell/mvpp2.c | 208 +++++++++++++++++++-- 2 files changed, 196 insertions(+), 14 deletions(-) -- 2.13.5