netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiri Pirko <jiri@resnulli.us>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, idosch@mellanox.com, mlxsw@mellanox.com
Subject: [patch net] mlxsw: reg: Add high and low temperature thresholds
Date: Mon, 30 Oct 2017 10:51:18 +0100	[thread overview]
Message-ID: <20171030095118.9098-1-jiri@resnulli.us> (raw)

From: Ido Schimmel <idosch@mellanox.com>

The ASIC has the ability to generate events whenever a sensor indicates
the temperature goes above or below its high or low thresholds,
respectively.

In new firmware versions the firmware enforces a minimum of 5
degrees Celsius difference between both thresholds. Make the driver
conform to this requirement.

Note that this is required even when the events are disabled, as in
certain systems interrupts are generated via GPIO based on these
thresholds.

Fixes: 85926f877040 ("mlxsw: reg: Add definition of temperature management registers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 4afc848..5acfbe5 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -5827,6 +5827,29 @@ MLXSW_ITEM32(reg, mtmp, mtr, 0x08, 30, 1);
  */
 MLXSW_ITEM32(reg, mtmp, max_temperature, 0x08, 0, 16);
 
+/* reg_mtmp_tee
+ * Temperature Event Enable.
+ * 0 - Do not generate event
+ * 1 - Generate event
+ * 2 - Generate single event
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtmp, tee, 0x0C, 30, 2);
+
+#define MLXSW_REG_MTMP_THRESH_HI 0x348	/* 105 Celsius */
+
+/* reg_mtmp_temperature_threshold_hi
+ * High threshold for Temperature Warning Event. In 0.125 Celsius.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtmp, temperature_threshold_hi, 0x0C, 0, 16);
+
+/* reg_mtmp_temperature_threshold_lo
+ * Low threshold for Temperature Warning Event. In 0.125 Celsius.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtmp, temperature_threshold_lo, 0x10, 0, 16);
+
 #define MLXSW_REG_MTMP_SENSOR_NAME_SIZE 8
 
 /* reg_mtmp_sensor_name
@@ -5843,6 +5866,8 @@ static inline void mlxsw_reg_mtmp_pack(char *payload, u8 sensor_index,
 	mlxsw_reg_mtmp_sensor_index_set(payload, sensor_index);
 	mlxsw_reg_mtmp_mte_set(payload, max_temp_enable);
 	mlxsw_reg_mtmp_mtr_set(payload, max_temp_reset);
+	mlxsw_reg_mtmp_temperature_threshold_hi_set(payload,
+						    MLXSW_REG_MTMP_THRESH_HI);
 }
 
 static inline void mlxsw_reg_mtmp_unpack(char *payload, unsigned int *p_temp,
-- 
2.9.5

             reply	other threads:[~2017-10-30  9:51 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-30  9:51 Jiri Pirko [this message]
2017-11-01  3:26 ` [patch net] mlxsw: reg: Add high and low temperature thresholds David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171030095118.9098-1-jiri@resnulli.us \
    --to=jiri@resnulli.us \
    --cc=davem@davemloft.net \
    --cc=idosch@mellanox.com \
    --cc=mlxsw@mellanox.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).