Re: [PATCH net-next 2/3] net: mscc: ocelot: Implement port policers via tc command

[Joergen Andreasen <joergen.andreasen@microchip.com>]

Hi Jiri,

The 05/02/2019 22:36, Jiri Pirko wrote:
> External E-Mail
> 
> 
> Thu, May 02, 2019 at 11:40:28AM CEST, joergen.andreasen@microchip.com wrote:
> >Hardware offload of port policers are now supported via the tc command.
> >Supported police parameters are: rate, burst and overhead.
> 
> Interesting, you offload matchall cls, yet you don't mention it at all.
> Please, do it.
>

I will mention that we also offload matchall cls in v2.

> 
> >
> >Example:
> >
> >Add:
> >tc qdisc add dev eth3 handle ffff: ingress
> >tc filter add dev eth3 parent ffff: prio 1 handle 2		\
> >	matchall skip_sw					\
> >	action police rate 100Mbit burst 10000 overhead 20
> >
> >Show:
> >tc -s -d qdisc show dev eth3
> >tc -s -d filter show dev eth3 ingress
> >
> >Delete:
> >tc filter del dev eth3 parent ffff: prio 1
> >tc qdisc del dev eth3 handle ffff: ingress
> >
> >Signed-off-by: Joergen Andreasen <joergen.andreasen@microchip.com>
> >---
> > drivers/net/ethernet/mscc/Makefile        |   2 +-
> > drivers/net/ethernet/mscc/ocelot.c        |   6 +-
> > drivers/net/ethernet/mscc/ocelot.h        |   3 +
> > drivers/net/ethernet/mscc/ocelot_police.c | 289 ++++++++++++++++++++++
> > drivers/net/ethernet/mscc/ocelot_police.h |  16 ++
> > drivers/net/ethernet/mscc/ocelot_tc.c     | 151 +++++++++++
> > drivers/net/ethernet/mscc/ocelot_tc.h     |  19 ++
> > 7 files changed, 483 insertions(+), 3 deletions(-)
> > create mode 100644 drivers/net/ethernet/mscc/ocelot_police.c
> > create mode 100644 drivers/net/ethernet/mscc/ocelot_police.h
> > create mode 100644 drivers/net/ethernet/mscc/ocelot_tc.c
> > create mode 100644 drivers/net/ethernet/mscc/ocelot_tc.h
> >
> >diff --git a/drivers/net/ethernet/mscc/Makefile b/drivers/net/ethernet/mscc/Makefile
> >index cb52a3b128ae..5e694dc1f7f8 100644
> >--- a/drivers/net/ethernet/mscc/Makefile
> >+++ b/drivers/net/ethernet/mscc/Makefile
> >@@ -1,5 +1,5 @@
> > # SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > obj-$(CONFIG_MSCC_OCELOT_SWITCH) += mscc_ocelot_common.o
> > mscc_ocelot_common-y := ocelot.o ocelot_io.o
> >-mscc_ocelot_common-y += ocelot_regs.o
> >+mscc_ocelot_common-y += ocelot_regs.o ocelot_tc.o ocelot_police.o
> > obj-$(CONFIG_MSCC_OCELOT_SWITCH_OCELOT) += ocelot_board.o
> >diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
> >index d715ef4fc92f..3ec7864d9dc8 100644
> >--- a/drivers/net/ethernet/mscc/ocelot.c
> >+++ b/drivers/net/ethernet/mscc/ocelot.c
> >@@ -943,6 +943,7 @@ static const struct net_device_ops ocelot_port_netdev_ops = {
> > 	.ndo_vlan_rx_kill_vid		= ocelot_vlan_rx_kill_vid,
> > 	.ndo_set_features		= ocelot_set_features,
> > 	.ndo_get_port_parent_id		= ocelot_get_port_parent_id,
> >+	.ndo_setup_tc			= ocelot_setup_tc,
> > };
> > 
> > static void ocelot_get_strings(struct net_device *netdev, u32 sset, u8 *data)
> >@@ -1663,8 +1664,9 @@ int ocelot_probe_port(struct ocelot *ocelot, u8 port,
> > 	dev->netdev_ops = &ocelot_port_netdev_ops;
> > 	dev->ethtool_ops = &ocelot_ethtool_ops;
> > 
> >-	dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_RXFCS;
> >-	dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
> >+	dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_RXFCS |
> >+		NETIF_F_HW_TC;
> >+	dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_TC;
> > 
> > 	memcpy(dev->dev_addr, ocelot->base_mac, ETH_ALEN);
> > 	dev->dev_addr[ETH_ALEN - 1] += port;
> >diff --git a/drivers/net/ethernet/mscc/ocelot.h b/drivers/net/ethernet/mscc/ocelot.h
> >index ba3b3380b4d0..9514979fa075 100644
> >--- a/drivers/net/ethernet/mscc/ocelot.h
> >+++ b/drivers/net/ethernet/mscc/ocelot.h
> >@@ -22,6 +22,7 @@
> > #include "ocelot_rew.h"
> > #include "ocelot_sys.h"
> > #include "ocelot_qs.h"
> >+#include "ocelot_tc.h"
> > 
> > #define PGID_AGGR    64
> > #define PGID_SRC     80
> >@@ -458,6 +459,8 @@ struct ocelot_port {
> > 
> > 	phy_interface_t phy_mode;
> > 	struct phy *serdes;
> >+
> >+	struct ocelot_port_tc tc;
> > };
> > 
> > u32 __ocelot_read_ix(struct ocelot *ocelot, u32 reg, u32 offset);
> >diff --git a/drivers/net/ethernet/mscc/ocelot_police.c b/drivers/net/ethernet/mscc/ocelot_police.c
> >new file mode 100644
> >index 000000000000..b40382dcc748
> >--- /dev/null
> >+++ b/drivers/net/ethernet/mscc/ocelot_police.c
> >@@ -0,0 +1,289 @@
> >+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >+/* Microsemi Ocelot Switch TC driver
> 
> "TC driver" ? That sounds quite odd...
>

I will change it to "Microsemi Ocelot Switch driver" in v2.

> 
> >+ *
> >+ * Copyright (c) 2019 Microsemi Corporation
> >+ */
> >+
> >+#include "ocelot_police.h"
> >+
> >+#define MSCC_RC(expr)				\
> >+	do {					\
> >+		int __rc__ = (expr);		\
> >+		if (__rc__ < 0)			\
> >+			return __rc__;		\
> >+	}					\
> >+	while (0)
> 
> Please don't use macros like this.
>

This macro will be removed in v2.

> 
> >+
> >+/* The following two functions do the same as in iproute2 */
> >+#define TIME_UNITS_PER_SEC	1000000
> >+static unsigned int tc_core_tick2time(unsigned int tick)
> >+{
> >+	return (tick * (u32)PSCHED_TICKS2NS(1)) / 1000;
> >+}
> >+
> >+static unsigned int tc_calc_xmitsize(u64 rate, unsigned int ticks)
> >+{
> >+	return div_u64(rate * tc_core_tick2time(ticks), TIME_UNITS_PER_SEC);
> >+}
> >+
> >+enum mscc_qos_rate_mode {
> >+	MSCC_QOS_RATE_MODE_DISABLED, /* Policer/shaper disabled */
> >+	MSCC_QOS_RATE_MODE_LINE, /* Measure line rate in kbps incl. IPG */
> >+	MSCC_QOS_RATE_MODE_DATA, /* Measures data rate in kbps excl. IPG */
> >+	MSCC_QOS_RATE_MODE_FRAME, /* Measures frame rate in fps */
> >+	__MSCC_QOS_RATE_MODE_END,
> >+	NUM_MSCC_QOS_RATE_MODE = __MSCC_QOS_RATE_MODE_END,
> >+	MSCC_QOS_RATE_MODE_MAX = __MSCC_QOS_RATE_MODE_END - 1,
> >+};
> >+
> >+/* Round x divided by y to nearest integer. x and y are integers */
> >+#define MSCC_ROUNDING_DIVISION(x, y) (((x) + ((y) / 2)) / (y))
> >+
> >+/* Round x divided by y to nearest higher integer. x and y are integers */
> >+#define MSCC_DIV_ROUND_UP(x, y) (((x) + (y) - 1) / (y))
> >+
> >+/* Types for ANA:POL[0-192]:POL_MODE_CFG.FRM_MODE */
> >+#define POL_MODE_LINERATE   0 /* Incl IPG. Unit: 33 1/3 kbps, 4096 bytes */
> >+#define POL_MODE_DATARATE   1 /* Excl IPG. Unit: 33 1/3 kbps, 4096 bytes  */
> >+#define POL_MODE_FRMRATE_HI 2 /* Unit: 33 1/3 fps, 32.8 frames */
> >+#define POL_MODE_FRMRATE_LO 3 /* Unit: 1/3 fps, 0.3 frames */
> >+
> >+/* Policer indexes */
> >+#define POL_IX_PORT    0    /* 0-11    : Port policers */
> >+#define POL_IX_QUEUE   32   /* 32-127  : Queue policers  */
> >+
> >+/* Default policer order */
> >+#define POL_ORDER 0x1d3 /* Ocelot policer order: Serial (QoS -> Port -> VCAP) */
> >+
> >+struct qos_policer_conf {
> >+	enum mscc_qos_rate_mode mode;
> >+	bool dlb; /* Enable DLB (dual leaky bucket mode */
> >+	bool cf;  /* Coupling flag (ignored in SLB mode) */
> >+	u32  cir; /* CIR in kbps/fps (ignored in SLB mode) */
> >+	u32  cbs; /* CBS in bytes/frames (ignored in SLB mode) */
> >+	u32  pir; /* PIR in kbps/fps */
> >+	u32  pbs; /* PBS in bytes/frames */
> >+	u8   ipg; /* Size of IPG when MSCC_QOS_RATE_MODE_LINE is chosen */
> >+};
> >+
> >+static int qos_policer_conf_set(struct ocelot_port *port,
> >+				u32 pol_ix,
> >+				struct qos_policer_conf *conf)
> >+{
> >+	struct ocelot *ocelot = port->ocelot;
> >+	u32 cir = 0, cbs = 0, pir = 0, pbs = 0;
> >+	u32 cf = 0, cir_ena = 0, frm_mode = 0;
> >+	u32 pbs_max = 0, cbs_max = 0;
> >+	bool cir_discard = 0, pir_discard = 0;
> >+	u8 ipg = 20;
> >+	u32 value;
> >+
> >+	pir = conf->pir;
> >+	pbs = conf->pbs;
> >+
> >+	switch (conf->mode) {
> >+	case MSCC_QOS_RATE_MODE_LINE:
> >+	case MSCC_QOS_RATE_MODE_DATA:
> >+		if (conf->mode == MSCC_QOS_RATE_MODE_LINE) {
> >+			frm_mode = POL_MODE_LINERATE;
> >+			ipg = min_t(u8, GENMASK(4, 0), conf->ipg);
> >+		} else {
> >+			frm_mode = POL_MODE_DATARATE;
> >+		}
> >+		if (conf->dlb) {
> >+			cir_ena = 1;
> >+			cir = conf->cir;
> >+			cbs = conf->cbs;
> >+			if (cir == 0 && cbs == 0) {
> >+				/* Discard cir frames */
> >+				cir_discard = 1;
> >+			} else {
> >+				cir = MSCC_DIV_ROUND_UP(cir, 100);
> >+				cir *= 3; /* 33 1/3 kbps */
> >+				cbs = MSCC_DIV_ROUND_UP(cbs, 4096);
> >+				cbs = (cbs ? cbs : 1); /* No zero burst size */
> >+				cbs_max = 60; /* Limit burst size */
> >+				cf = conf->cf;
> >+				if (cf)
> >+					pir += conf->cir;
> >+			}
> >+		}
> >+		if (pir == 0 && pbs == 0) {
> >+			/* Discard PIR frames */
> >+			pir_discard = 1;
> >+		} else {
> >+			pir = MSCC_DIV_ROUND_UP(pir, 100);
> >+			pir *= 3;  /* 33 1/3 kbps */
> >+			pbs = MSCC_DIV_ROUND_UP(pbs, 4096);
> >+			pbs = (pbs ? pbs : 1); /* No zero burst size */
> >+			pbs_max = 60; /* Limit burst size */
> >+		}
> >+		break;
> >+	case MSCC_QOS_RATE_MODE_FRAME:
> >+		if (pir >= 100) {
> >+			frm_mode = POL_MODE_FRMRATE_HI;
> >+			pir = MSCC_DIV_ROUND_UP(pir, 100);
> >+			pir *= 3;  /* 33 1/3 fps */
> >+			pbs = (pbs * 10) / 328; /* 32.8 frames */
> >+			pbs = (pbs ? pbs : 1); /* No zero burst size */
> >+			pbs_max = GENMASK(6, 0); /* Limit burst size */
> >+		} else {
> >+			frm_mode = POL_MODE_FRMRATE_LO;
> >+			if (pir == 0 && pbs == 0) {
> >+				/* Discard all frames */
> >+				pir_discard = 1;
> >+				cir_discard = 1;
> >+			} else {
> >+				pir *= 3; /* 1/3 fps */
> >+				pbs = (pbs * 10) / 3; /* 0.3 frames */
> >+				pbs = (pbs ? pbs : 1); /* No zero burst size */
> >+				pbs_max = 61; /* Limit burst size */
> >+			}
> >+		}
> >+		break;
> >+	default: /* MSCC_QOS_RATE_MODE_DISABLED */
> >+		/* Disable policer using maximum rate and zero burst */
> >+		pir = GENMASK(15, 0);
> >+		pbs = 0;
> >+		break;
> >+	}
> >+
> >+	/* Limit to maximum values */
> >+	pir = min_t(u32, GENMASK(15, 0), pir);
> >+	cir = min_t(u32, GENMASK(15, 0), cir);
> >+	pbs = min_t(u32, pbs_max, pbs);
> >+	cbs = min_t(u32, cbs_max, cbs);
> >+
> >+	value = (ANA_POL_MODE_CFG_IPG_SIZE(ipg) |
> >+		 ANA_POL_MODE_CFG_FRM_MODE(frm_mode) |
> >+		 (cf ? ANA_POL_MODE_CFG_DLB_COUPLED : 0) |
> >+		 (cir_ena ? ANA_POL_MODE_CFG_CIR_ENA : 0) |
> >+		 ANA_POL_MODE_CFG_OVERSHOOT_ENA);
> >+
> >+	ocelot_write_gix(ocelot,
> >+			 value,
> >+			 ANA_POL_MODE_CFG,
> >+			 pol_ix);
> >+
> >+	ocelot_write_gix(ocelot,
> >+			 ANA_POL_PIR_CFG_PIR_RATE(pir) |
> >+			 ANA_POL_PIR_CFG_PIR_BURST(pbs),
> >+			 ANA_POL_PIR_CFG,
> >+			 pol_ix);
> >+
> >+	ocelot_write_gix(ocelot,
> >+			 (pir_discard ? GENMASK(22, 0) : 0),
> >+			 ANA_POL_PIR_STATE,
> >+			 pol_ix);
> >+
> >+	ocelot_write_gix(ocelot,
> >+			 ANA_POL_CIR_CFG_CIR_RATE(cir) |
> >+			 ANA_POL_CIR_CFG_CIR_BURST(cbs),
> >+			 ANA_POL_CIR_CFG,
> >+			 pol_ix);
> >+
> >+	ocelot_write_gix(ocelot,
> >+			 (cir_discard ? GENMASK(22, 0) : 0),
> >+			 ANA_POL_CIR_STATE,
> >+			 pol_ix);
> 
> I understand that you want to wrap all 5 calls in the same way. But
> still, pol_ix does not have to be on a separate line.
>

I will fix this and the folloeing unnecessary line wraps in v2.

> 
> >+
> >+	return 0;
> >+}
> >+
> >+int ocelot_port_policer_add(struct ocelot_port *port,
> >+			    struct tcf_police *p)
> >+{
> >+	struct ocelot *ocelot = port->ocelot;
> >+	struct qos_policer_conf pp;
> >+
> >+	if (!p)
> >+		return -EINVAL;
> >+
> >+	netdev_dbg(port->dev,
> 
> Unnecessary line wrap.
> 
> 
> >+		   "result %d ewma_rate %u burst %lld mtu %u mtu_pktoks %lld\n",
> >+		   p->params->tcfp_result,
> >+		   p->params->tcfp_ewma_rate,
> >+		   p->params->tcfp_burst,
> >+		   p->params->tcfp_mtu,
> >+		   p->params->tcfp_mtu_ptoks);
> >+
> >+	if (p->params->rate_present)
> >+		netdev_dbg(port->dev,
> 
> Again, no need to wrap.
> 
> 
> >+			   "rate: rate %llu mult %u over %u link %u shift %u\n",
> >+			   p->params->rate.rate_bytes_ps,
> >+			   p->params->rate.mult,
> >+			   p->params->rate.overhead,
> >+			   p->params->rate.linklayer,
> >+			   p->params->rate.shift);
> >+
> >+	if (p->params->peak_present)
> >+		netdev_dbg(port->dev,
> 
> Again, no need to wrap.
> 
> 
> >+			   "peak: rate %llu mult %u over %u link %u shift %u\n",
> >+			   p->params->peak.rate_bytes_ps,
> >+			   p->params->peak.mult,
> >+			   p->params->peak.overhead,
> >+			   p->params->peak.linklayer,
> >+			   p->params->peak.shift);
> >+
> >+	memset(&pp, 0, sizeof(pp));
> >+
> >+	if (p->params->tcfp_ewma_rate) {
> >+		netdev_err(port->dev, "tcfp_ewma_rate is not supported\n");
> >+		return -EOPNOTSUPP;
> >+	}
> >+	if (p->params->peak_present) {
> >+		netdev_err(port->dev, "peakrate is not supported\n");
> >+		return -EOPNOTSUPP;
> >+	}
> >+	if (!p->params->rate_present) {
> >+		netdev_err(port->dev, "rate not specified\n");
> >+		return -EINVAL;
> >+	}
> >+	if (p->params->rate.overhead) {
> >+		pp.mode = MSCC_QOS_RATE_MODE_LINE;
> >+		pp.ipg = p->params->rate.overhead;
> >+	} else {
> >+		pp.mode = MSCC_QOS_RATE_MODE_DATA;
> >+	}
> >+
> >+	pp.pir = (u32)div_u64(p->params->rate.rate_bytes_ps, 1000) * 8;
> >+	pp.pbs = tc_calc_xmitsize(p->params->rate.rate_bytes_ps,
> >+				  PSCHED_NS2TICKS(p->params->tcfp_burst));
> >+	netdev_dbg(port->dev,
> 
> Again, no need to wrap.
> 
> 
> >+		   "%s: port %u pir %u kbps, pbs %u bytes, ipg %u bytes\n",
> >+		   __func__, port->chip_port, pp.pir, pp.pbs, pp.ipg);
> >+
> >+	MSCC_RC(qos_policer_conf_set(port, POL_IX_PORT + port->chip_port, &pp));
> >+
> >+	ocelot_rmw_gix(ocelot,
> >+		       ANA_PORT_POL_CFG_PORT_POL_ENA |
> >+		       ANA_PORT_POL_CFG_POL_ORDER(POL_ORDER),
> >+		       ANA_PORT_POL_CFG_PORT_POL_ENA |
> >+		       ANA_PORT_POL_CFG_POL_ORDER_M,
> >+		       ANA_PORT_POL_CFG,
> >+		       port->chip_port);
> >+
> >+	return 0;
> >+}
> >+
> >+int ocelot_port_policer_del(struct ocelot_port *port)
> >+{
> >+	struct ocelot *ocelot = port->ocelot;
> >+	struct qos_policer_conf pp;
> >+
> >+	netdev_dbg(port->dev, "%s: port %u\n", __func__, port->chip_port);
> >+
> >+	memset(&pp, 0, sizeof(pp));
> >+	pp.mode = MSCC_QOS_RATE_MODE_DISABLED;
> >+
> >+	MSCC_RC(qos_policer_conf_set(port, POL_IX_PORT + port->chip_port, &pp));
> >+
> >+	ocelot_rmw_gix(ocelot, 0 |
> >+		       ANA_PORT_POL_CFG_POL_ORDER(POL_ORDER),
> >+		       ANA_PORT_POL_CFG_PORT_POL_ENA |
> >+		       ANA_PORT_POL_CFG_POL_ORDER_M,
> >+		       ANA_PORT_POL_CFG,
> >+		       port->chip_port);
> >+
> >+	return 0;
> >+}
> >diff --git a/drivers/net/ethernet/mscc/ocelot_police.h b/drivers/net/ethernet/mscc/ocelot_police.h
> >new file mode 100644
> >index 000000000000..bc4dc34c684e
> >--- /dev/null
> >+++ b/drivers/net/ethernet/mscc/ocelot_police.h
> >@@ -0,0 +1,16 @@
> >+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> >+/* Microsemi Ocelot Switch driver
> >+ *
> >+ * Copyright (c) 2019 Microsemi Corporation
> >+ */
> >+
> >+#ifndef _MSCC_OCELOT_POLICE_H_
> >+#define _MSCC_OCELOT_POLICE_H_
> >+
> >+#include <net/tc_act/tc_police.h>
> >+#include "ocelot.h"
> >+
> >+int ocelot_port_policer_add(struct ocelot_port *port, struct tcf_police *p);
> >+int ocelot_port_policer_del(struct ocelot_port *port);
> >+
> >+#endif /* _MSCC_OCELOT_POLICE_H_ */
> >diff --git a/drivers/net/ethernet/mscc/ocelot_tc.c b/drivers/net/ethernet/mscc/ocelot_tc.c
> >new file mode 100644
> >index 000000000000..97b0a7bf5d06
> >--- /dev/null
> >+++ b/drivers/net/ethernet/mscc/ocelot_tc.c
> >@@ -0,0 +1,151 @@
> >+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >+/* Microsemi Ocelot Switch TC driver
> >+ *
> >+ * Copyright (c) 2019 Microsemi Corporation
> >+ */
> >+
> >+#include "ocelot_tc.h"
> >+#include "ocelot_police.h"
> >+#include <net/pkt_cls.h>
> >+
> >+static int ocelot_setup_tc_cls_matchall(struct ocelot_port *port,
> >+					struct tc_cls_matchall_offload *f,
> >+					bool ingress)
> >+{
> >+	const struct tc_action *a;
> >+	int err;
> >+
> >+	netdev_dbg(port->dev,
> 
> Again, no need to wrap.
> 
> 
> >+		   "%s: port %u cookie %lu\n",
> >+		   __func__, port->chip_port, f->cookie);
> >+	switch (f->command) {
> >+	case TC_CLSMATCHALL_REPLACE:
> >+		if (!tcf_exts_has_one_action(f->exts)) {
> >+			netdev_err(port->dev, "only one action is supported\n");
> >+			return -EOPNOTSUPP;
> >+		}
> >+
> >+		a = tcf_exts_first_action(f->exts);
> >+
> >+		if (is_tcf_police(a)) {
> >+			if (!ingress)
> >+				return -EOPNOTSUPP;
> >+
> >+			if (port->tc.police_id &&
> >+			    port->tc.police_id != f->cookie) {
> >+				netdev_warn(port->dev,
> 
> Again, no need to wrap.
> 
> 
> >+					    "Only one policer per port is supported\n");
> >+				return -EEXIST;
> >+			}
> >+
> >+			err = ocelot_port_policer_add(port, to_police(a));
> >+			if (err) {
> >+				netdev_err(port->dev, "Could not add policer\n");
> >+				return err;
> >+			}
> >+			port->tc.police_id = f->cookie;
> >+			return 0;
> >+		} else {
> >+			return -EOPNOTSUPP;
> >+		}
> >+	case TC_CLSMATCHALL_DESTROY:
> >+		if (port->tc.police_id != f->cookie)
> >+			return -ENOENT;
> >+
> >+		err = ocelot_port_policer_del(port);
> >+		if (err) {
> >+			netdev_err(port->dev, "Could not delete policer\n");
> >+			return err;
> >+		}
> >+		port->tc.police_id = 0;
> >+		return 0;
> >+	default:
> >+		return -EOPNOTSUPP;
> >+	}
> >+}
> >+
> >+static int ocelot_setup_tc_block_cb(enum tc_setup_type type,
> >+				    void *type_data,
> >+				    void *cb_priv, bool ingress)
> >+{
> >+	struct ocelot_port *port = cb_priv;
> >+
> >+	if (!tc_cls_can_offload_and_chain0(port->dev, type_data))
> >+		return -EOPNOTSUPP;
> >+
> >+	switch (type) {
> >+	case TC_SETUP_CLSMATCHALL:
> >+		netdev_dbg(port->dev, "tc_block_cb: TC_SETUP_CLSMATCHALL %s\n",
> >+			   ingress ? "ingress" : "egress");
> >+
> >+		return ocelot_setup_tc_cls_matchall(port, type_data, ingress);
> >+	case TC_SETUP_CLSFLOWER:
> >+		netdev_dbg(port->dev, "tc_block_cb: TC_SETUP_CLSFLOWER %s\n",
> >+			   ingress ? "ingress" : "egress");
> >+
> >+		return -EOPNOTSUPP;
> >+	default:
> >+		netdev_dbg(port->dev, "tc_block_cb: type %d %s\n",
> >+			   type,
> >+			   ingress ? "ingress" : "egress");
> >+
> >+		return -EOPNOTSUPP;
> >+	}
> >+}
> >+
> >+static int ocelot_setup_tc_block_cb_ig(enum tc_setup_type type,
> >+				       void *type_data,
> >+				       void *cb_priv)
> >+{
> >+	return ocelot_setup_tc_block_cb(type, type_data,
> 
> Again, no need to wrap.
> 
> 
> >+					cb_priv, true);
> >+}
> >+
> >+static int ocelot_setup_tc_block_cb_eg(enum tc_setup_type type,
> >+				       void *type_data,
> >+				       void *cb_priv)
> >+{
> >+	return ocelot_setup_tc_block_cb(type, type_data,
> 
> Again, no need to wrap.
> 
> 
> >+					cb_priv, false);
> >+}
> >+
> >+static int ocelot_setup_tc_block(struct ocelot_port *port,
> >+				 struct tc_block_offload *f)
> >+{
> >+	tc_setup_cb_t *cb;
> >+
> >+	netdev_dbg(port->dev, "tc_block command %d, binder_type %d\n",
> >+		   f->command, f->binder_type);
> >+
> >+	if (f->binder_type == TCF_BLOCK_BINDER_TYPE_CLSACT_INGRESS)
> >+		cb = ocelot_setup_tc_block_cb_ig;
> >+	else if (f->binder_type == TCF_BLOCK_BINDER_TYPE_CLSACT_EGRESS)
> >+		cb = ocelot_setup_tc_block_cb_eg;
> >+	else
> >+		return -EOPNOTSUPP;
> >+
> >+	switch (f->command) {
> >+	case TC_BLOCK_BIND:
> >+		return tcf_block_cb_register(f->block, cb, port,
> >+					     port, f->extack);
> >+	case TC_BLOCK_UNBIND:
> >+		tcf_block_cb_unregister(f->block, cb, port);
> >+		return 0;
> >+	default:
> >+		return -EOPNOTSUPP;
> >+	}
> >+}
> >+
> >+int ocelot_setup_tc(struct net_device *dev, enum tc_setup_type type,
> >+		    void *type_data)
> >+{
> >+	struct ocelot_port *port = netdev_priv(dev);
> >+
> >+	switch (type) {
> >+	case TC_SETUP_BLOCK:
> >+		return ocelot_setup_tc_block(port, type_data);
> >+	default:
> >+		return -EOPNOTSUPP;
> >+	}
> >+	return 0;
> >+}
> >diff --git a/drivers/net/ethernet/mscc/ocelot_tc.h b/drivers/net/ethernet/mscc/ocelot_tc.h
> >new file mode 100644
> >index 000000000000..c905b98b6b4c
> >--- /dev/null
> >+++ b/drivers/net/ethernet/mscc/ocelot_tc.h
> >@@ -0,0 +1,19 @@
> >+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> >+/* Microsemi Ocelot Switch driver
> >+ *
> >+ * Copyright (c) 2019 Microsemi Corporation
> >+ */
> >+
> >+#ifndef _MSCC_OCELOT_TC_H_
> >+#define _MSCC_OCELOT_TC_H_
> >+
> >+#include <linux/netdevice.h>
> >+
> >+struct ocelot_port_tc {
> >+	unsigned long police_id;
> >+};
> >+
> >+int ocelot_setup_tc(struct net_device *dev, enum tc_setup_type type,
> >+		    void *type_data);
> >+
> >+#endif /* _MSCC_OCELOT_TC_H_ */
> >-- 
> >2.17.1
> >
> 

-- 
Joergen Andreasen, Microchip