Commit "net: phy: Add detection of 1000BaseX link mode support" added support for not filtering out 1000BaseX mode from the PHY's supported modes in genphy_config_init, but we have to make a similar change in genphy_read_abilities in order to actually detect it as a supported mode in the first place. Add this in. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> --- drivers/net/phy/phy_device.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 03c885e..5387890 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1984,6 +1984,8 @@ int genphy_read_abilities(struct phy_device *phydev) phydev->supported, val & ESTATUS_1000_TFULL); linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, phydev->supported, val & ESTATUS_1000_THALF); + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->supported, val & ESTATUS_1000_XFULL); } return 0; -- 1.8.3.1
On 6/11/19 3:06 PM, Robert Hancock wrote:
> Commit "net: phy: Add detection of 1000BaseX link mode support" added
> support for not filtering out 1000BaseX mode from the PHY's supported
> modes in genphy_config_init, but we have to make a similar change in
> genphy_read_abilities in order to actually detect it as a supported mode
> in the first place. Add this in.
>
> Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian
From: Robert Hancock <hancock@sedsystems.ca>
Date: Tue, 11 Jun 2019 16:06:09 -0600
> Commit "net: phy: Add detection of 1000BaseX link mode support" added
> support for not filtering out 1000BaseX mode from the PHY's supported
> modes in genphy_config_init, but we have to make a similar change in
> genphy_read_abilities in order to actually detect it as a supported mode
> in the first place. Add this in.
>
> Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Applied.