Netdev Archive on lore.kernel.org
 help / color / Atom feed
From: Saeed Mahameed <saeedm@mellanox.com>
To: Saeed Mahameed <saeedm@mellanox.com>,
	Leon Romanovsky <leonro@mellanox.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-rdma@vger.kernel.org" <linux-rdma@vger.kernel.org>,
	Jianbo Liu <jianbol@mellanox.com>,
	Eli Britstein <elibr@mellanox.com>, Roi Dayan <roid@mellanox.com>,
	Mark Bloch <markb@mellanox.com>
Subject: [PATCH mlx5-next 07/15] net/mlx5: E-Switch, Add match on vport metadata for rule in fast path
Date: Mon, 17 Jun 2019 19:23:21 +0000
Message-ID: <20190617192247.25107-8-saeedm@mellanox.com> (raw)
In-Reply-To: <20190617192247.25107-1-saeedm@mellanox.com>

From: Jianbo Liu <jianbol@mellanox.com>

If FW's capabilities and configurations meet the requirement of vport
metadata matching, this feature will be used. As the information
about vport number and vhca_id related to packet is already stored to
its metadata register, which is used as an indicator for perticular
vport, now we can change to match on this metadata for all the
offloading rules in fast path.

Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 .../mellanox/mlx5/core/eswitch_offloads.c     | 85 +++++++++++--------
 1 file changed, 51 insertions(+), 34 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 871ae44dc132..ee18896dfd46 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -88,6 +88,53 @@ u16 mlx5_eswitch_get_prio_range(struct mlx5_eswitch *esw)
 	return 1;
 }
 
+static void
+mlx5_eswitch_set_rule_source_port(struct mlx5_eswitch *esw,
+				  struct mlx5_flow_spec *spec,
+				  struct mlx5_esw_flow_attr *attr)
+{
+	void *misc2;
+	void *misc;
+
+	/* Use metadata matching because vport is not represented by single
+	 * VHCA in dual-port RoCE mode, and matching on source vport may fail.
+	 */
+	if (mlx5_eswitch_vport_match_metadata_enabled(esw)) {
+		misc2 = MLX5_ADDR_OF(fte_match_param, spec->match_value, misc_parameters_2);
+		MLX5_SET(fte_match_set_misc2, misc2, metadata_reg_c_0,
+			 mlx5_eswitch_get_vport_metadata_for_match(attr->in_mdev->priv.eswitch,
+								   attr->in_rep->vport));
+
+		misc2 = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters_2);
+		MLX5_SET_TO_ONES(fte_match_set_misc2, misc2, metadata_reg_c_0);
+
+		spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS_2;
+		misc = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters);
+		if (memchr_inv(misc, 0, MLX5_ST_SZ_BYTES(fte_match_set_misc)))
+			spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS;
+	} else {
+		misc = MLX5_ADDR_OF(fte_match_param, spec->match_value, misc_parameters);
+		MLX5_SET(fte_match_set_misc, misc, source_port, attr->in_rep->vport);
+
+		if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
+			MLX5_SET(fte_match_set_misc, misc,
+				 source_eswitch_owner_vhca_id,
+				 MLX5_CAP_GEN(attr->in_mdev, vhca_id));
+
+		misc = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters);
+		MLX5_SET_TO_ONES(fte_match_set_misc, misc, source_port);
+		if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
+			MLX5_SET_TO_ONES(fte_match_set_misc, misc,
+					 source_eswitch_owner_vhca_id);
+
+		spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS;
+	}
+
+	if (MLX5_CAP_ESW_FLOWTABLE(esw->dev, flow_source) &&
+	    attr->in_rep->vport == MLX5_VPORT_UPLINK)
+		spec->flow_context.flow_source = MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK;
+}
+
 struct mlx5_flow_handle *
 mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
 				struct mlx5_flow_spec *spec,
@@ -99,7 +146,6 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
 	struct mlx5_flow_handle *rule;
 	struct mlx5_flow_table *fdb;
 	int j, i = 0;
-	void *misc;
 
 	if (esw->mode != SRIOV_OFFLOADS)
 		return ERR_PTR(-EOPNOTSUPP);
@@ -159,21 +205,8 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
 		i++;
 	}
 
-	misc = MLX5_ADDR_OF(fte_match_param, spec->match_value, misc_parameters);
-	MLX5_SET(fte_match_set_misc, misc, source_port, attr->in_rep->vport);
-
-	if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
-		MLX5_SET(fte_match_set_misc, misc,
-			 source_eswitch_owner_vhca_id,
-			 MLX5_CAP_GEN(attr->in_mdev, vhca_id));
+	mlx5_eswitch_set_rule_source_port(esw, spec, attr);
 
-	misc = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters);
-	MLX5_SET_TO_ONES(fte_match_set_misc, misc, source_port);
-	if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
-		MLX5_SET_TO_ONES(fte_match_set_misc, misc,
-				 source_eswitch_owner_vhca_id);
-
-	spec->match_criteria_enable = MLX5_MATCH_MISC_PARAMETERS;
 	if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_DECAP) {
 		if (attr->tunnel_match_level != MLX5_MATCH_NONE)
 			spec->match_criteria_enable |= MLX5_MATCH_OUTER_HEADERS;
@@ -219,7 +252,6 @@ mlx5_eswitch_add_fwd_rule(struct mlx5_eswitch *esw,
 	struct mlx5_flow_table *fast_fdb;
 	struct mlx5_flow_table *fwd_fdb;
 	struct mlx5_flow_handle *rule;
-	void *misc;
 	int i;
 
 	fast_fdb = esw_get_prio_table(esw, attr->chain, attr->prio, 0);
@@ -251,25 +283,10 @@ mlx5_eswitch_add_fwd_rule(struct mlx5_eswitch *esw,
 	dest[i].ft = fwd_fdb,
 	i++;
 
-	misc = MLX5_ADDR_OF(fte_match_param, spec->match_value, misc_parameters);
-	MLX5_SET(fte_match_set_misc, misc, source_port, attr->in_rep->vport);
-
-	if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
-		MLX5_SET(fte_match_set_misc, misc,
-			 source_eswitch_owner_vhca_id,
-			 MLX5_CAP_GEN(attr->in_mdev, vhca_id));
-
-	misc = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters);
-	MLX5_SET_TO_ONES(fte_match_set_misc, misc, source_port);
-	if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
-		MLX5_SET_TO_ONES(fte_match_set_misc, misc,
-				 source_eswitch_owner_vhca_id);
+	mlx5_eswitch_set_rule_source_port(esw, spec, attr);
 
-	if (attr->match_level == MLX5_MATCH_NONE)
-		spec->match_criteria_enable = MLX5_MATCH_MISC_PARAMETERS;
-	else
-		spec->match_criteria_enable = MLX5_MATCH_OUTER_HEADERS |
-					      MLX5_MATCH_MISC_PARAMETERS;
+	if (attr->match_level != MLX5_MATCH_NONE)
+		spec->match_criteria_enable |= MLX5_MATCH_OUTER_HEADERS;
 
 	rule = mlx5_add_flow_rules(fast_fdb, spec, &flow_act, dest, i);
 
-- 
2.21.0


  parent reply index

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-17 19:23 [PATCH mlx5-next 00/15] Mellanox, mlx5 vport metadata matching Saeed Mahameed
2019-06-17 19:23 ` [PATCH mlx5-next 01/15] net/mlx5: Introduce vport metadata matching bits and enum constants Saeed Mahameed
2019-06-17 19:23 ` [PATCH mlx5-next 02/15] net/mlx5: Get vport ACL namespace by vport index Saeed Mahameed
2019-06-17 19:23 ` [PATCH mlx5-next 03/15] net/mlx5: Support allocating modify header context from ingress ACL Saeed Mahameed
2019-06-17 19:23 ` [PATCH mlx5-next 04/15] net/mlx5: Add flow context for flow tag Saeed Mahameed
2019-06-17 19:23 ` [PATCH mlx5-next 05/15] net/mlx5: E-Switch, Tag packet with vport number in VF vports and uplink ingress ACLs Saeed Mahameed
2019-06-18 10:31   ` Parav Pandit
2019-06-19  5:12     ` Jianbo Liu
2019-06-19  5:42       ` Parav Pandit
2019-06-19  6:45         ` Jianbo Liu
2019-06-19 12:52     ` Jianbo Liu
2019-06-18 11:00   ` Parav Pandit
2019-06-17 19:23 ` [PATCH mlx5-next 06/15] net/mlx5e: Specifying known origin of packets matching the flow Saeed Mahameed
2019-06-17 19:23 ` Saeed Mahameed [this message]
2019-06-17 19:23 ` [PATCH mlx5-next 08/15] net/mlx5: E-Switch, Add query and modify esw vport context functions Saeed Mahameed
2019-06-17 19:23 ` [PATCH mlx5-next 09/15] net/mlx5: E-Switch, Pass metadata from FDB to eswitch manager Saeed Mahameed
2019-06-17 19:23 ` [PATCH mlx5-next 10/15] net/mlx5: E-Switch, Add match on vport metadata for rule in slow path Saeed Mahameed
2019-06-17 19:23 ` [PATCH mlx5-next 11/15] RDMA/mlx5: Add vport metadata matching for IB representors Saeed Mahameed
2019-06-18 10:19   ` Leon Romanovsky
2019-06-19  4:44     ` Jianbo Liu
2019-06-19  5:04       ` Leon Romanovsky
2019-06-19  6:40         ` Jianbo Liu
2019-06-19  6:51           ` Leon Romanovsky
2019-06-19  7:26             ` Mark Bloch
2019-06-19  7:43               ` Leon Romanovsky
2019-06-19  7:58                 ` Mark Bloch
2019-06-19  8:12                   ` Leon Romanovsky
2019-06-19 17:52                     ` Mark Bloch
2019-06-17 19:23 ` [PATCH mlx5-next 12/15] net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it Saeed Mahameed
2019-06-18 10:24   ` Parav Pandit
2019-06-18 10:35     ` Leon Romanovsky
2019-06-17 19:23 ` [PATCH mlx5-next 13/15] net/mlx5: E-Switch, Use vport index when init rep Saeed Mahameed
2019-06-17 19:23 ` [PATCH mlx5-next 14/15] {IB, net}/mlx5: E-Switch, Use index of rep for vport to IB port mapping Saeed Mahameed
2019-06-18 10:42   ` Leon Romanovsky
2019-06-18 10:47     ` Parav Pandit
2019-06-18 18:25       ` Saeed Mahameed
2019-06-19  5:00         ` Leon Romanovsky
2019-06-17 19:23 ` [PATCH mlx5-next 15/15] RDMA/mlx5: Cleanup rep when doing unload Saeed Mahameed
2019-06-18 10:38   ` Leon Romanovsky

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190617192247.25107-8-saeedm@mellanox.com \
    --to=saeedm@mellanox.com \
    --cc=elibr@mellanox.com \
    --cc=jianbol@mellanox.com \
    --cc=leonro@mellanox.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=markb@mellanox.com \
    --cc=netdev@vger.kernel.org \
    --cc=roid@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Netdev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netdev/0 netdev/git/0.git
	git clone --mirror https://lore.kernel.org/netdev/1 netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ https://lore.kernel.org/netdev \
		netdev@vger.kernel.org netdev@archiver.kernel.org
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netdev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox