netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Luke Nelson <lukenels@cs.washington.edu>
To: unlisted-recipients:; (no To-header on input)
Cc: "Luke Nelson" <luke.r.nels@gmail.com>,
	"Xi Wang" <xi.wang@gmail.com>,
	"Palmer Dabbelt" <palmer@sifive.com>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Alexei Starovoitov" <ast@kernel.org>,
	"Daniel Borkmann" <daniel@iogearbox.net>,
	"Martin KaFai Lau" <kafai@fb.com>,
	"Song Liu" <songliubraving@fb.com>, "Yonghong Song" <yhs@fb.com>,
	"Björn Töpel" <bjorn.topel@gmail.com>,
	linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	netdev@vger.kernel.org, bpf@vger.kernel.org
Subject: [RFC PATCH bpf-next] RV32G eBPF JIT
Date: Fri, 21 Jun 2019 15:59:30 -0700	[thread overview]
Message-ID: <20190621225938.27030-1-lukenels@cs.washington.edu> (raw)

From: Luke Nelson <luke.r.nels@gmail.com>

This is an eBPF JIT for RV32G, adapted from the JIT for RV64G.
Any feedback would be greatly appreciated.

It passes 359 out of 378 tests in test_bpf.ko. The failing tests are
features that are not supported right now:
  - ALU64 DIV/MOD:
      These require loops to emulate on 32-bit hardware,
      and are not supported on other 32-bit JITs like
      ARM32.
  - BPF_XADD | BPF_DW:
      RV32G does not have atomic instructions for operating
      on double words. This is similar to ARM32.
  - Tail calls:
      I'm working on adding support for these now, but couldn't
      find any test cases that use them. What's the best way
      of testing tail call code?
  - Far branches
      These are not supported in RV64G either.

There are two main changes required for this to work compared to the
RV64 JIT.

First, eBPF registers are 64-bit, while RV32G registers are 32-bit.
I take an approach similar to ARM32: most BPF registers map directly to
2 RISC-V registers, while some reside in stack scratch space and must
be saved / restored when used.

Second, many 64-bit ALU operations do not trivially map to 32-bit
operations. Operations that move bits between high and low words, such
as ADD, LSH, MUL, and others must emulate the 64-bit behavior in terms
of 32-bit instructions.

Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Cc: Xi Wang <xi.wang@gmail.com>
---
 arch/riscv/Kconfig              |    2 +-
 arch/riscv/net/Makefile         |    7 +-
 arch/riscv/net/bpf_jit_comp32.c | 1460 +++++++++++++++++++++++++++++++
 3 files changed, 1467 insertions(+), 2 deletions(-)
 create mode 100644 arch/riscv/net/bpf_jit_comp32.c

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 0c4b12205632..153ff9ee6e6c 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -49,7 +49,7 @@ config RISCV
 	select GENERIC_IRQ_MULTI_HANDLER
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_MMIOWB
-	select HAVE_EBPF_JIT if 64BIT
+	select HAVE_EBPF_JIT
 
 config MMU
 	def_bool y
diff --git a/arch/riscv/net/Makefile b/arch/riscv/net/Makefile
index ec5b14763316..5511fb1dd40e 100644
--- a/arch/riscv/net/Makefile
+++ b/arch/riscv/net/Makefile
@@ -1,2 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o
+
+ifeq ($(CONFIG_ARCH_RV64I),y)
+	obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o
+else
+	obj-$(CONFIG_BPF_JIT) += bpf_jit_comp32.o
+endif
diff --git a/arch/riscv/net/bpf_jit_comp32.c b/arch/riscv/net/bpf_jit_comp32.c
new file mode 100644
index 000000000000..8790fd931aed
--- /dev/null
+++ b/arch/riscv/net/bpf_jit_comp32.c
@@ -0,0 +1,1460 @@
+// SPDX-License-Identifier: GPL-2.0
+/* BPF JIT compiler for RV32G
+ *
+ * Copyright(c) 2019 Luke Nelson <luke.r.nels@gmail.com>
+ * This code is based on the code and ideas from
+ * Björn Töpel <bjorn.topel@gmail.com>,
+ * who wrote the rv64g BPF JIT, and
+ * Shubham Bansal <illusionist.neo@gmail.com> and
+ * Mircea Gherzan <mgherzan@gmail.com>,
+ * who wrote the 32-bit ARM BPF JIT.
+ */
+
+#include <linux/bpf.h>
+#include <linux/filter.h>
+#include <asm/cacheflush.h>
+
+enum {
+	RV_REG_ZERO =	0,	/* The constant value 0 */
+	RV_REG_RA =	1,	/* Return address */
+	RV_REG_SP =	2,	/* Stack pointer */
+	RV_REG_GP =	3,	/* Global pointer */
+	RV_REG_TP =	4,	/* Thread pointer */
+	RV_REG_T0 =	5,	/* Temporaries */
+	RV_REG_T1 =	6,
+	RV_REG_T2 =	7,
+	RV_REG_FP =	8,
+	RV_REG_S1 =	9,	/* Saved registers */
+	RV_REG_A0 =	10,	/* Function argument/return values */
+	RV_REG_A1 =	11,	/* Function arguments */
+	RV_REG_A2 =	12,
+	RV_REG_A3 =	13,
+	RV_REG_A4 =	14,
+	RV_REG_A5 =	15,
+	RV_REG_A6 =	16,
+	RV_REG_A7 =	17,
+	RV_REG_S2 =	18,	/* Saved registers */
+	RV_REG_S3 =	19,
+	RV_REG_S4 =	20,
+	RV_REG_S5 =	21,
+	RV_REG_S6 =	22,
+	RV_REG_S7 =	23,
+	RV_REG_S8 =	24,
+	RV_REG_S9 =	25,
+	RV_REG_S10 =	26,
+	RV_REG_S11 =	27,
+	RV_REG_T3 =	28,	/* Temporaries */
+	RV_REG_T4 =	29,
+	RV_REG_T5 =	30,
+	RV_REG_T6 =	31,
+};
+
+enum {
+	/* Stack layout - these are offsets from (top of stack - 4) */
+	BPF_R6_HI,
+	BPF_R6_LO,
+	BPF_R7_HI,
+	BPF_R7_LO,
+	BPF_R8_HI,
+	BPF_R8_LO,
+	BPF_R9_HI,
+	BPF_R9_LO,
+	BPF_TC_HI,
+	BPF_TC_LO,
+	BPF_AX_HI,
+	BPF_AX_LO,
+	/* Stack space for BPF_REG_6, BPF_REG_7, BPF_REG_8, BPF_REG_9,
+	 * BPF_REG_AX and tail call counts.
+	 */
+	BPF_JIT_SCRATCH_REGS,
+};
+
+#define STACK_OFFSET(k) (-4 - ((k) * 4))
+
+#define TMP_REG_1	(MAX_BPF_JIT_REG + 0)	/* TEMP Register 1 */
+#define TMP_REG_2	(MAX_BPF_JIT_REG + 1)	/* TEMP Register 2 */
+#define TCALL_CNT	(MAX_BPF_JIT_REG + 2)	/* Tail Call Count */
+
+static const s8 bpf2rv32[][2] = {
+	/* Return value from in-kernel function, and exit value from eBPF */
+	[BPF_REG_0] = {RV_REG_S2, RV_REG_S1},
+	/* Arguments from eBPF program to in-kernel function */
+	[BPF_REG_1] = {RV_REG_A1, RV_REG_A0},
+	[BPF_REG_2] = {RV_REG_A3, RV_REG_A2},
+	[BPF_REG_3] = {RV_REG_A5, RV_REG_A4},
+	[BPF_REG_4] = {RV_REG_A7, RV_REG_A6},
+	[BPF_REG_5] = {RV_REG_S4, RV_REG_S3},
+	/* Callee saved registers that in-kernel function will preserve */
+	/* Stored on stack scratch space */
+	[BPF_REG_6] = {STACK_OFFSET(BPF_R6_HI), STACK_OFFSET(BPF_R6_LO)},
+	[BPF_REG_7] = {STACK_OFFSET(BPF_R7_HI), STACK_OFFSET(BPF_R7_LO)},
+	[BPF_REG_8] = {STACK_OFFSET(BPF_R8_HI), STACK_OFFSET(BPF_R8_LO)},
+	[BPF_REG_9] = {STACK_OFFSET(BPF_R9_HI), STACK_OFFSET(BPF_R9_LO)},
+	/* Read only Frame Pointer to access Stack */
+	[BPF_REG_FP] = {RV_REG_S6, RV_REG_S5},
+	/* Temporary Register for internal BPF JIT, can be used
+	 * for constant blindings and others. Save T0 and T1
+	 * for use internal to one instruction.
+	 */
+	[TMP_REG_1] = {RV_REG_T3, RV_REG_T2},
+	[TMP_REG_2] = {RV_REG_T5, RV_REG_T4},
+	/* Tail call count. Stored on stack scratch space. */
+	[TCALL_CNT] = {STACK_OFFSET(BPF_TC_HI), STACK_OFFSET(BPF_TC_LO)},
+	/* Temporary register for blinding constants.
+	 * Stored on stack scratch space.
+	 */
+	[BPF_REG_AX] = {STACK_OFFSET(BPF_AX_HI), STACK_OFFSET(BPF_AX_LO)},
+};
+
+struct rv_jit_context {
+	struct bpf_prog *prog;
+	u32 *insns; /* RV insns */
+	int ninsns;
+	int epilogue_offset;
+	int *offset; /* BPF to RV */
+	unsigned long flags;
+	int stack_size;
+};
+
+struct rv_jit_data {
+	struct bpf_binary_header *header;
+	u8 *image;
+	struct rv_jit_context ctx;
+};
+
+static void emit(const u32 insn, struct rv_jit_context *ctx)
+{
+	if (ctx->insns)
+		ctx->insns[ctx->ninsns] = insn;
+
+	ctx->ninsns++;
+}
+
+static u32 rv_r_insn(u8 funct7, u8 rs2, u8 rs1, u8 funct3, u8 rd, u8 opcode)
+{
+	return (funct7 << 25) | (rs2 << 20) | (rs1 << 15) | (funct3 << 12) |
+		(rd << 7) | opcode;
+}
+
+static u32 rv_i_insn(u16 imm11_0, u8 rs1, u8 funct3, u8 rd, u8 opcode)
+{
+	return (imm11_0 << 20) | (rs1 << 15) | (funct3 << 12) | (rd << 7) |
+		opcode;
+}
+
+static u32 rv_s_insn(u16 imm11_0, u8 rs2, u8 rs1, u8 funct3, u8 opcode)
+{
+	u8 imm11_5 = imm11_0 >> 5, imm4_0 = imm11_0 & 0x1f;
+
+	return (imm11_5 << 25) | (rs2 << 20) | (rs1 << 15) | (funct3 << 12) |
+		(imm4_0 << 7) | opcode;
+}
+
+static u32 rv_sb_insn(u16 imm12_1, u8 rs2, u8 rs1, u8 funct3, u8 opcode)
+{
+	u8 imm12 = ((imm12_1 & 0x800) >> 5) | ((imm12_1 & 0x3f0) >> 4);
+	u8 imm4_1 = ((imm12_1 & 0xf) << 1) | ((imm12_1 & 0x400) >> 10);
+
+	return (imm12 << 25) | (rs2 << 20) | (rs1 << 15) | (funct3 << 12) |
+		(imm4_1 << 7) | opcode;
+}
+
+static u32 rv_u_insn(u32 imm31_12, u8 rd, u8 opcode)
+{
+	return (imm31_12 << 12) | (rd << 7) | opcode;
+}
+
+static u32 rv_uj_insn(u32 imm20_1, u8 rd, u8 opcode)
+{
+	u32 imm;
+
+	imm = (imm20_1 & 0x80000) |  ((imm20_1 & 0x3ff) << 9) |
+		  ((imm20_1 & 0x400) >> 2) | ((imm20_1 & 0x7f800) >> 11);
+
+	return (imm << 12) | (rd << 7) | opcode;
+}
+
+static u32 rv_amo_insn(u8 funct5, u8 aq, u8 rl, u8 rs2, u8 rs1,
+			   u8 funct3, u8 rd, u8 opcode)
+{
+	u8 funct7 = (funct5 << 2) | (aq << 1) | rl;
+
+	return rv_r_insn(funct7, rs2, rs1, funct3, rd, opcode);
+}
+
+static u32 rv_addi(u8 rd, u8 rs1, u16 imm11_0)
+{
+	return rv_i_insn(imm11_0, rs1, 0, rd, 0x13);
+}
+
+static u32 rv_add(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(0, rs2, rs1, 0, rd, 0x33);
+}
+
+static u32 rv_sub(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(0x20, rs2, rs1, 0, rd, 0x33);
+}
+
+static u32 rv_and(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(0, rs2, rs1, 7, rd, 0x33);
+}
+
+static u32 rv_or(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(0, rs2, rs1, 6, rd, 0x33);
+}
+
+static u32 rv_xor(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(0, rs2, rs1, 4, rd, 0x33);
+}
+
+static u32 rv_mul(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(1, rs2, rs1, 0, rd, 0x33);
+}
+
+static u32 rv_mulhu(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(1, rs2, rs1, 3, rd, 0x33);
+}
+
+static u32 rv_divu(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(1, rs2, rs1, 5, rd, 0x33);
+}
+
+static u32 rv_remu(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(1, rs2, rs1, 7, rd, 0x33);
+}
+
+static u32 rv_sll(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(0, rs2, rs1, 1, rd, 0x33);
+}
+
+static u32 rv_srl(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(0, rs2, rs1, 5, rd, 0x33);
+}
+
+static u32 rv_sra(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(0x20, rs2, rs1, 5, rd, 0x33);
+}
+
+static u32 rv_sltu(u8 rd, u8 rs1, u8 rs2)
+{
+	return rv_r_insn(0, rs2, rs1, 3, rd, 0x33);
+}
+
+static u32 rv_lui(u8 rd, u32 imm31_12)
+{
+	return rv_u_insn(imm31_12, rd, 0x37);
+}
+
+static u32 rv_slli(u8 rd, u8 rs1, u16 imm11_0)
+{
+	return rv_i_insn(imm11_0, rs1, 1, rd, 0x13);
+}
+
+static u32 rv_srli(u8 rd, u8 rs1, u16 imm11_0)
+{
+	return rv_i_insn(imm11_0, rs1, 5, rd, 0x13);
+}
+
+static u32 rv_srai(u8 rd, u8 rs1, u16 imm11_0)
+{
+	return rv_i_insn(0x400 | imm11_0, rs1, 5, rd, 0x13);
+}
+
+static u32 rv_andi(u8 rd, u8 rs1, u16 imm11_0)
+{
+	return rv_i_insn(imm11_0, rs1, 7, rd, 0x13);
+}
+
+static u32 rv_jal(u8 rd, u32 imm20_1)
+{
+	return rv_uj_insn(imm20_1, rd, 0x6f);
+}
+
+static u32 rv_jalr(u8 rd, u8 rs1, u16 imm11_0)
+{
+	return rv_i_insn(imm11_0, rs1, 0, rd, 0x67);
+}
+
+static u32 rv_beq(u8 rs1, u8 rs2, u16 imm12_1)
+{
+	return rv_sb_insn(imm12_1, rs2, rs1, 0, 0x63);
+}
+
+static u32 rv_bltu(u8 rs1, u8 rs2, u16 imm12_1)
+{
+	return rv_sb_insn(imm12_1, rs2, rs1, 6, 0x63);
+}
+
+static u32 rv_bgeu(u8 rs1, u8 rs2, u16 imm12_1)
+{
+	return rv_sb_insn(imm12_1, rs2, rs1, 7, 0x63);
+}
+
+static u32 rv_bne(u8 rs1, u8 rs2, u16 imm12_1)
+{
+	return rv_sb_insn(imm12_1, rs2, rs1, 1, 0x63);
+}
+
+static u32 rv_blt(u8 rs1, u8 rs2, u16 imm12_1)
+{
+	return rv_sb_insn(imm12_1, rs2, rs1, 4, 0x63);
+}
+
+static u32 rv_bge(u8 rs1, u8 rs2, u16 imm12_1)
+{
+	return rv_sb_insn(imm12_1, rs2, rs1, 5, 0x63);
+}
+
+static u32 rv_sb(u8 rs1, u16 imm11_0, u8 rs2)
+{
+	return rv_s_insn(imm11_0, rs2, rs1, 0, 0x23);
+}
+
+static u32 rv_sh(u8 rs1, u16 imm11_0, u8 rs2)
+{
+	return rv_s_insn(imm11_0, rs2, rs1, 1, 0x23);
+}
+
+static u32 rv_sw(u8 rs1, u16 imm11_0, u8 rs2)
+{
+	return rv_s_insn(imm11_0, rs2, rs1, 2, 0x23);
+}
+
+static u32 rv_lbu(u8 rd, u16 imm11_0, u8 rs1)
+{
+	return rv_i_insn(imm11_0, rs1, 4, rd, 0x03);
+}
+
+static u32 rv_lhu(u8 rd, u16 imm11_0, u8 rs1)
+{
+	return rv_i_insn(imm11_0, rs1, 5, rd, 0x03);
+}
+
+static u32 rv_lw(u8 rd, u16 imm11_0, u8 rs1)
+{
+	return rv_i_insn(imm11_0, rs1, 2, rd, 0x03);
+}
+
+static u32 rv_amoadd_w(u8 rd, u8 rs2, u8 rs1, u8 aq, u8 rl)
+{
+	return rv_amo_insn(0, aq, rl, rs2, rs1, 2, rd, 0x2f);
+}
+
+static bool is_13b_int(s32 val)
+{
+	return -(1 << 12) <= val && val < (1 << 12);
+}
+
+static bool is_21b_int(s32 val)
+{
+	return -(1L << 20) <= val && val < (1L << 20);
+}
+
+static int is_13b_check(int off, int insn)
+{
+	if (!is_13b_int(off)) {
+		pr_err("bpf-jit: insn=%d offset=%d not supported yet!\n",
+		       insn, off);
+		return -1;
+	}
+	return 0;
+}
+
+static int is_21b_check(int off, int insn)
+{
+	if (!is_21b_int(off)) {
+		pr_err("bpf-jit: insn=%d offset=%d not supported yet!\n",
+		       insn, off);
+		return -1;
+	}
+	return 0;
+}
+
+static void emit_imm(const s8 rd, s32 imm, struct rv_jit_context *ctx)
+{
+	u32 upper = (imm + (1 << 11)) >> 12;
+	u32 lower = imm & 0xfff;
+
+	if (upper) {
+		emit(rv_lui(rd, upper), ctx);
+		emit(rv_addi(rd, rd, lower), ctx);
+	} else {
+		emit(rv_addi(rd, RV_REG_ZERO, lower), ctx);
+	}
+}
+
+static void emit_imm32(const s8 *rd, s32 imm, struct rv_jit_context *ctx)
+{
+	/* Emit immediate into lower bits */
+	emit_imm(rd[1], imm, ctx);
+
+	/* Sign-extend into upper bits */
+	emit(rv_addi(rd[0], rd[1], 0), ctx);
+	emit(rv_srai(rd[0], rd[0], 31), ctx);
+}
+
+static void emit_imm64(const s8 *rd, s32 imm_hi, s32 imm_lo,
+		       struct rv_jit_context *ctx)
+{
+	emit_imm(rd[1], imm_lo, ctx);
+	emit_imm(rd[0], imm_hi, ctx);
+}
+
+static int rv_offset(int bpf_to, int bpf_from, struct rv_jit_context *ctx)
+{
+	int from = ctx->offset[bpf_from] - 1, to = ctx->offset[bpf_to];
+
+	return (to - from) << 2;
+}
+
+static int epilogue_offset(struct rv_jit_context *ctx)
+{
+	int to = ctx->epilogue_offset, from = ctx->ninsns;
+
+	return (to - from) << 2;
+}
+
+static void build_epilogue(struct rv_jit_context *ctx)
+{
+	int stack_adjust = ctx->stack_size, store_offset = stack_adjust - 8;
+	const s8 *r0 = bpf2rv32[BPF_REG_0];
+
+	store_offset -= 4 * BPF_JIT_SCRATCH_REGS;
+
+	/* Set return value. */
+	emit(rv_addi(RV_REG_A0, r0[1], 0), ctx);
+	emit(rv_addi(RV_REG_A1, r0[0], 0), ctx);
+
+	/* Restore callee-saved registers. */
+	emit(rv_lw(RV_REG_RA, store_offset - 0, RV_REG_SP), ctx);
+	emit(rv_lw(RV_REG_FP, store_offset - 4, RV_REG_SP), ctx);
+	emit(rv_lw(RV_REG_S1, store_offset - 8, RV_REG_SP), ctx);
+	emit(rv_lw(RV_REG_S2, store_offset - 12, RV_REG_SP), ctx);
+	emit(rv_lw(RV_REG_S3, store_offset - 16, RV_REG_SP), ctx);
+	emit(rv_lw(RV_REG_S4, store_offset - 20, RV_REG_SP), ctx);
+	emit(rv_lw(RV_REG_S5, store_offset - 24, RV_REG_SP), ctx);
+	emit(rv_lw(RV_REG_S6, store_offset - 28, RV_REG_SP), ctx);
+
+	emit(rv_addi(RV_REG_SP, RV_REG_SP, stack_adjust), ctx);
+	emit(rv_jalr(RV_REG_ZERO, RV_REG_RA, 0), ctx);
+}
+
+static int rv_offset_check(int *rvoff, s16 off, int insn,
+			   struct rv_jit_context *ctx)
+{
+	*rvoff = rv_offset(insn + off, insn, ctx);
+	return is_13b_check(*rvoff, insn);
+}
+
+static bool is_stacked(s8 reg)
+{
+	return reg < 0;
+}
+
+static const s8 *rv32_bpf_get_reg64(const s8 *reg, const s8 *tmp,
+				    struct rv_jit_context *ctx)
+{
+	if (is_stacked(reg[0])) {
+		emit(rv_lw(tmp[0], reg[0], RV_REG_FP), ctx);
+		emit(rv_lw(tmp[1], reg[1], RV_REG_FP), ctx);
+		reg = tmp;
+	}
+	return reg;
+}
+
+static void rv32_bpf_put_reg64(const s8 *reg, const s8 *src,
+			       struct rv_jit_context *ctx)
+{
+	if (is_stacked(reg[0])) {
+		emit(rv_sw(RV_REG_FP, reg[0], src[0]), ctx);
+		emit(rv_sw(RV_REG_FP, reg[1], src[1]), ctx);
+	}
+}
+
+static const s8 *rv32_bpf_get_reg32(const s8 *reg, const s8 *tmp,
+				    struct rv_jit_context *ctx)
+{
+	if (is_stacked(reg[1])) {
+		emit(rv_lw(tmp[1], reg[1], RV_REG_FP), ctx);
+		reg = tmp;
+	}
+	return reg;
+}
+
+static void rv32_bpf_put_reg32(const s8 *reg, const s8 *src,
+			       struct rv_jit_context *ctx)
+{
+	if (is_stacked(reg[1])) {
+		emit(rv_sw(RV_REG_FP, reg[1], src[1]), ctx);
+		emit(rv_sw(RV_REG_FP, reg[0], RV_REG_ZERO), ctx);
+	} else {
+		emit(rv_addi(reg[0], RV_REG_ZERO, 0), ctx);
+	}
+}
+
+static void emit_rv32_alu_i64(const s8 dst[], s32 imm,
+			      struct rv_jit_context *ctx,
+			      const u8 op)
+{
+	const s8 *tmp1 = bpf2rv32[TMP_REG_1];
+	const s8 *rd = rv32_bpf_get_reg64(dst, tmp1, ctx);
+
+	switch (op) {
+	case BPF_MOV:
+		emit_imm32(rd, imm, ctx);
+		break;
+	}
+
+	rv32_bpf_put_reg64(dst, rd, ctx);
+}
+
+static void emit_rv32_alu_i32(const s8 dst[], s32 imm,
+			      struct rv_jit_context *ctx,
+			      const u8 op)
+{
+	const s8 *tmp1 = bpf2rv32[TMP_REG_1];
+	const s8 *rd = rv32_bpf_get_reg32(dst, tmp1, ctx);
+
+	switch (op) {
+	case BPF_MOV:
+		emit_imm32(rd, imm, ctx);
+		break;
+	}
+
+	rv32_bpf_put_reg32(dst, rd, ctx);
+}
+
+static void emit_rv32_alu_r64(const s8 dst[], const s8 src[],
+			      struct rv_jit_context *ctx,
+			      const u8 op)
+{
+	const s8 *tmp1 = bpf2rv32[TMP_REG_1];
+	const s8 *tmp2 = bpf2rv32[TMP_REG_2];
+	const s8 *rd = rv32_bpf_get_reg64(dst, tmp1, ctx);
+	const s8 *rs = rv32_bpf_get_reg64(src, tmp2, ctx);
+
+	switch (op) {
+	case BPF_MOV:
+		emit(rv_addi(rd[0], rs[0], 0), ctx);
+		emit(rv_addi(rd[1], rs[1], 0), ctx);
+		break;
+	case BPF_ADD:
+		emit(rv_addi(RV_REG_T0, rd[1], 0), ctx);
+		emit(rv_add(rd[1], rd[1], rs[1]), ctx);
+		emit(rv_sltu(RV_REG_T0, rd[1], RV_REG_T0), ctx);
+		emit(rv_add(rd[0], rd[0], rs[0]), ctx);
+		emit(rv_add(rd[0], rd[0], RV_REG_T0), ctx);
+		break;
+	case BPF_SUB:
+		emit(rv_addi(RV_REG_T0, rd[1], 0), ctx);
+		emit(rv_sub(rd[1], rd[1], rs[1]), ctx);
+		emit(rv_sltu(RV_REG_T0, RV_REG_T0, rd[1]), ctx);
+		emit(rv_sub(rd[0], rd[0], rs[0]), ctx);
+		emit(rv_sub(rd[0], rd[0], RV_REG_T0), ctx);
+		break;
+	case BPF_AND:
+		emit(rv_and(rd[0], rd[0], rs[0]), ctx);
+		emit(rv_and(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_OR:
+		emit(rv_or(rd[0], rd[0], rs[0]), ctx);
+		emit(rv_or(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_XOR:
+		emit(rv_xor(rd[0], rd[0], rs[0]), ctx);
+		emit(rv_xor(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_MUL:
+		emit(rv_mul(RV_REG_T0, rs[0], rd[1]), ctx);
+		emit(rv_mul(rd[0], rd[0], rs[1]), ctx);
+		emit(rv_mulhu(RV_REG_T1, rd[1], rs[1]), ctx);
+		emit(rv_add(rd[0], rd[0], RV_REG_T0), ctx);
+		emit(rv_mul(rd[1], rd[1], rs[1]), ctx);
+		emit(rv_add(rd[0], rd[0], RV_REG_T1), ctx);
+		break;
+	case BPF_LSH:
+		emit(rv_addi(RV_REG_T0, rs[1], -32), ctx);
+		emit(rv_blt(RV_REG_T0, RV_REG_ZERO, 16 >> 1), ctx);
+
+		emit(rv_sll(rd[0], rd[1], RV_REG_T0), ctx);
+		emit(rv_addi(rd[1], RV_REG_ZERO, 0), ctx);
+		emit(rv_jal(RV_REG_ZERO, 32 >> 1), ctx);
+
+		emit(rv_addi(RV_REG_T1, RV_REG_ZERO, 31), ctx);
+		emit(rv_srli(RV_REG_T0, rd[1], 1), ctx);
+		emit(rv_sub(RV_REG_T1, RV_REG_T1, rs[1]), ctx);
+		emit(rv_srl(RV_REG_T0, RV_REG_T0, RV_REG_T1), ctx);
+		emit(rv_sll(rd[0], rd[0], rs[1]), ctx);
+		emit(rv_or(rd[0], RV_REG_T0, rd[0]), ctx);
+		emit(rv_sll(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_RSH:
+		emit(rv_addi(RV_REG_T0, rs[1], -32), ctx);
+		emit(rv_blt(RV_REG_T0, RV_REG_ZERO, 16 >> 1), ctx);
+
+		emit(rv_srl(rd[1], rd[0], RV_REG_T0), ctx);
+		emit(rv_addi(rd[0], RV_REG_ZERO, 0), ctx);
+		emit(rv_jal(RV_REG_ZERO, 32 >> 1), ctx);
+
+		emit(rv_addi(RV_REG_T1, RV_REG_ZERO, 31), ctx);
+		emit(rv_slli(RV_REG_T0, rd[0], 1), ctx);
+		emit(rv_sub(RV_REG_T1, RV_REG_T1, rs[1]), ctx);
+		emit(rv_sll(RV_REG_T0, RV_REG_T0, RV_REG_T1), ctx);
+		emit(rv_srl(rd[1], rd[1], rs[1]), ctx);
+		emit(rv_or(rd[1], RV_REG_T0, rd[1]), ctx);
+		emit(rv_srl(rd[0], rd[0], rs[1]), ctx);
+		break;
+	case BPF_ARSH:
+		emit(rv_addi(RV_REG_T0, rs[1], -32), ctx);
+		emit(rv_blt(RV_REG_T0, RV_REG_ZERO, 16 >> 1), ctx);
+
+		emit(rv_sra(rd[1], rd[0], RV_REG_T0), ctx);
+		emit(rv_srai(rd[0], rd[0], 0x1f), ctx);
+		emit(rv_jal(RV_REG_ZERO, 32 >> 1), ctx);
+
+		emit(rv_addi(RV_REG_T1, RV_REG_ZERO, 31), ctx);
+		emit(rv_slli(RV_REG_T0, rd[0], 1), ctx);
+		emit(rv_sub(RV_REG_T1, RV_REG_T1, rs[1]), ctx);
+		emit(rv_sll(RV_REG_T0, RV_REG_T0, RV_REG_T1), ctx);
+		emit(rv_srl(rd[1], rd[1], rs[1]), ctx);
+		emit(rv_or(rd[1], RV_REG_T0, rd[1]), ctx);
+		emit(rv_sra(rd[0], rd[0], rs[1]), ctx);
+		break;
+	case BPF_NEG:
+		emit(rv_sub(rd[1], RV_REG_ZERO, rd[1]), ctx);
+		emit(rv_sltu(RV_REG_T0, RV_REG_ZERO, rd[1]), ctx);
+		emit(rv_sub(rd[0], RV_REG_ZERO, rd[0]), ctx);
+		emit(rv_sub(rd[0], rd[0], RV_REG_T0), ctx);
+		break;
+	}
+
+	rv32_bpf_put_reg64(dst, rd, ctx);
+}
+
+static void emit_rv32_alu_r32(const s8 dst[], const s8 src[],
+			      struct rv_jit_context *ctx,
+			      const u8 op)
+{
+	const s8 *tmp1 = bpf2rv32[TMP_REG_1];
+	const s8 *tmp2 = bpf2rv32[TMP_REG_2];
+	const s8 *rd = rv32_bpf_get_reg32(dst, tmp1, ctx);
+	const s8 *rs = rv32_bpf_get_reg32(src, tmp2, ctx);
+
+	switch (op) {
+	case BPF_MOV:
+		emit(rv_addi(rd[1], rs[1], 0), ctx);
+		break;
+	case BPF_ADD:
+		emit(rv_add(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_SUB:
+		emit(rv_sub(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_AND:
+		emit(rv_and(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_OR:
+		emit(rv_or(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_XOR:
+		emit(rv_xor(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_MUL:
+		emit(rv_mul(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_DIV:
+		emit(rv_divu(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_MOD:
+		emit(rv_remu(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_LSH:
+		emit(rv_sll(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_RSH:
+		emit(rv_srl(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_ARSH:
+		emit(rv_sra(rd[1], rd[1], rs[1]), ctx);
+		break;
+	case BPF_NEG:
+		emit(rv_sub(rd[1], RV_REG_ZERO, rd[1]), ctx);
+		break;
+	}
+
+	rv32_bpf_put_reg32(dst, rd, ctx);
+}
+
+static int emit_rv32_jump_r64(const s8 src1[], const s8 src2[],
+			      s16 off, int insn,
+			      struct rv_jit_context *ctx,
+			      const u8 op)
+{
+	int rvoff;
+	const s8 *tmp1 = bpf2rv32[TMP_REG_1];
+	const s8 *tmp2 = bpf2rv32[TMP_REG_2];
+	const s8 *rs1 = rv32_bpf_get_reg64(src1, tmp1, ctx);
+	const s8 *rs2 = rv32_bpf_get_reg64(src2, tmp2, ctx);
+
+	if (rv_offset_check(&rvoff, off, insn, ctx))
+		return -1;
+
+	switch (op) {
+	case BPF_JEQ:
+		emit(rv_bne(rs1[0], rs2[0], 8 >> 1), ctx);
+		emit(rv_beq(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JNE:
+		emit(rv_bne(rs1[0], rs2[0], (rvoff + 4) >> 1), ctx);
+		emit(rv_bne(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JLE:
+		emit(rv_bltu(rs1[0], rs2[0], (rvoff + 8) >> 1), ctx);
+		emit(rv_bltu(rs2[0], rs1[0], 8 >> 1), ctx);
+		emit(rv_bgeu(rs2[1], rs1[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JLT:
+		emit(rv_bltu(rs1[0], rs2[0], (rvoff + 8) >> 1), ctx);
+		emit(rv_bltu(rs2[0], rs1[0], 8 >> 1), ctx);
+		emit(rv_bltu(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JGE:
+		emit(rv_bltu(rs2[0], rs1[0], (rvoff + 8) >> 1), ctx);
+		emit(rv_bltu(rs1[0], rs2[0], 8 >> 1), ctx);
+		emit(rv_bgeu(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JGT:
+		emit(rv_bltu(rs2[0], rs1[0], (rvoff + 8) >> 1), ctx);
+		emit(rv_bltu(rs1[0], rs2[0], 8 >> 1), ctx);
+		emit(rv_bltu(rs2[1], rs1[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JSLE:
+		emit(rv_blt(rs1[0], rs2[0], (rvoff + 8) >> 1), ctx);
+		emit(rv_bne(rs2[0], rs1[0], 8 >> 1), ctx);
+		emit(rv_bgeu(rs2[1], rs1[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JSLT:
+		emit(rv_blt(rs1[0], rs2[0], (rvoff + 8) >> 1), ctx);
+		emit(rv_bne(rs2[0], rs1[0], 8 >> 1), ctx);
+		emit(rv_bltu(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JSGE:
+		emit(rv_blt(rs2[0], rs1[0], (rvoff + 8) >> 1), ctx);
+		emit(rv_bne(rs1[0], rs2[0], 8 >> 1), ctx);
+		emit(rv_bgeu(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JSGT:
+		emit(rv_blt(rs2[0], rs1[0], (rvoff + 8) >> 1), ctx);
+		emit(rv_bne(rs1[0], rs2[0], 8 >> 1), ctx);
+		emit(rv_bltu(rs2[1], rs1[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JSET:
+		emit(rv_and(RV_REG_T0, rs1[0], rs2[0]), ctx);
+		emit(rv_bne(RV_REG_T0, RV_REG_ZERO, (rvoff + 8) >> 1), ctx);
+		emit(rv_and(RV_REG_T0, rs1[1], rs2[1]), ctx);
+		emit(rv_bne(RV_REG_T0, RV_REG_ZERO, rvoff >> 1), ctx);
+		break;
+	}
+
+	return 0;
+}
+
+static int emit_rv32_jump_r32(const s8 src1[], const s8 src2[],
+			      s16 off, int insn,
+			      struct rv_jit_context *ctx,
+			      const u8 op)
+{
+	int rvoff;
+	const s8 *tmp1 = bpf2rv32[TMP_REG_1];
+	const s8 *tmp2 = bpf2rv32[TMP_REG_2];
+	const s8 *rs1 = rv32_bpf_get_reg32(src1, tmp1, ctx);
+	const s8 *rs2 = rv32_bpf_get_reg32(src2, tmp2, ctx);
+
+	if (rv_offset_check(&rvoff, off, insn, ctx))
+		return -1;
+
+	switch (op) {
+	case BPF_JEQ:
+		emit(rv_beq(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JNE:
+		emit(rv_bne(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JLE:
+		emit(rv_bgeu(rs2[1], rs1[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JLT:
+		emit(rv_bltu(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JGE:
+		emit(rv_bgeu(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JGT:
+		emit(rv_bltu(rs2[1], rs1[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JSLE:
+		emit(rv_bge(rs2[1], rs1[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JSLT:
+		emit(rv_blt(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JSGE:
+		emit(rv_bge(rs1[1], rs2[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JSGT:
+		emit(rv_blt(rs2[1], rs1[1], rvoff >> 1), ctx);
+		break;
+	case BPF_JSET:
+		emit(rv_and(RV_REG_T0, rs1[1], rs2[1]), ctx);
+		emit(rv_bne(RV_REG_T0, RV_REG_ZERO, rvoff >> 1), ctx);
+		break;
+	}
+
+	return 0;
+}
+
+static int emit_rv32_load_r64(const s8 dst[], const s8 src[],
+			      s16 off,
+			      struct rv_jit_context *ctx,
+			      const u8 size)
+{
+	const s8 *tmp1 = bpf2rv32[TMP_REG_1];
+	const s8 *tmp2 = bpf2rv32[TMP_REG_2];
+	const s8 *rd = rv32_bpf_get_reg64(dst, tmp1, ctx);
+	const s8 *rs = rv32_bpf_get_reg64(src, tmp2, ctx);
+
+	emit_imm(RV_REG_T0, off, ctx);
+	emit(rv_add(RV_REG_T0, RV_REG_T0, rs[1]), ctx);
+
+	switch (size) {
+	case BPF_B:
+		emit(rv_lbu(rd[1], 0, RV_REG_T0), ctx);
+		emit(rv_addi(rd[0], RV_REG_ZERO, 0), ctx);
+		break;
+	case BPF_H:
+		emit(rv_lhu(rd[1], 0, RV_REG_T0), ctx);
+		emit(rv_addi(rd[0], RV_REG_ZERO, 0), ctx);
+		break;
+	case BPF_W:
+		emit(rv_lw(rd[1], 0, RV_REG_T0), ctx);
+		emit(rv_addi(rd[0], RV_REG_ZERO, 0), ctx);
+		break;
+	case BPF_DW:
+		emit(rv_lw(rd[1], 0, RV_REG_T0), ctx);
+		emit(rv_lw(rd[0], 4, RV_REG_T0), ctx);
+		break;
+	}
+
+	rv32_bpf_put_reg64(dst, rd, ctx);
+	return 0;
+}
+
+static int emit_rv32_store_r64(const s8 dst[], const s8 src[],
+			       s16 off,
+			       struct rv_jit_context *ctx,
+			       const u8 size, const u8 mode)
+{
+	const s8 *tmp1 = bpf2rv32[TMP_REG_1];
+	const s8 *tmp2 = bpf2rv32[TMP_REG_2];
+	const s8 *rd = rv32_bpf_get_reg64(dst, tmp1, ctx);
+	const s8 *rs = rv32_bpf_get_reg64(src, tmp2, ctx);
+
+	if (mode == BPF_XADD && size != BPF_W)
+		return -1;
+
+	emit_imm(RV_REG_T0, off, ctx);
+	emit(rv_add(RV_REG_T0, RV_REG_T0, rd[1]), ctx);
+
+	switch (size) {
+	case BPF_B:
+		emit(rv_sb(RV_REG_T0, 0, rs[1]), ctx);
+		break;
+	case BPF_H:
+		emit(rv_sh(RV_REG_T0, 0, rs[1]), ctx);
+		break;
+	case BPF_W:
+		switch (mode) {
+		case BPF_MEM:
+			emit(rv_sw(RV_REG_T0, 0, rs[1]), ctx);
+			break;
+		case BPF_XADD:
+			emit(rv_amoadd_w(RV_REG_ZERO, rs[1], RV_REG_T0, 0, 0), ctx);
+			break;
+		}
+		break;
+	case BPF_DW:
+		emit(rv_sw(RV_REG_T0, 0, rs[1]), ctx);
+		emit(rv_sw(RV_REG_T0, 4, rs[0]), ctx);
+		break;
+	}
+
+	return 0;
+}
+
+static void emit_rv32_rev16(const s8 rd, struct rv_jit_context *ctx)
+{
+	emit(rv_addi(RV_REG_T1, RV_REG_ZERO, 0), ctx);
+
+	emit(rv_andi(RV_REG_T0, rd, 0xff), ctx);
+	emit(rv_add(RV_REG_T1, RV_REG_T1, RV_REG_T0), ctx);
+	emit(rv_slli(RV_REG_T1, RV_REG_T1, 8), ctx);
+	emit(rv_srli(rd, rd, 8), ctx);
+
+	emit(rv_andi(RV_REG_T0, rd, 0xff), ctx);
+	emit(rv_add(RV_REG_T1, RV_REG_T1, RV_REG_T0), ctx);
+
+	emit(rv_addi(rd, RV_REG_T1, 0), ctx);
+}
+
+static void emit_rv32_rev32(const s8 rd, struct rv_jit_context *ctx)
+{
+	emit(rv_addi(RV_REG_T1, RV_REG_ZERO, 0), ctx);
+
+	emit(rv_andi(RV_REG_T0, rd, 0xff), ctx);
+	emit(rv_add(RV_REG_T1, RV_REG_T1, RV_REG_T0), ctx);
+	emit(rv_slli(RV_REG_T1, RV_REG_T1, 8), ctx);
+	emit(rv_srli(rd, rd, 8), ctx);
+
+	emit(rv_andi(RV_REG_T0, rd, 0xff), ctx);
+	emit(rv_add(RV_REG_T1, RV_REG_T1, RV_REG_T0), ctx);
+	emit(rv_slli(RV_REG_T1, RV_REG_T1, 8), ctx);
+	emit(rv_srli(rd, rd, 8), ctx);
+
+	emit(rv_andi(RV_REG_T0, rd, 0xff), ctx);
+	emit(rv_add(RV_REG_T1, RV_REG_T1, RV_REG_T0), ctx);
+	emit(rv_slli(RV_REG_T1, RV_REG_T1, 8), ctx);
+	emit(rv_srli(rd, rd, 8), ctx);
+	emit(rv_andi(RV_REG_T0, rd, 0xff), ctx);
+	emit(rv_add(RV_REG_T1, RV_REG_T1, RV_REG_T0), ctx);
+
+	emit(rv_addi(rd, RV_REG_T1, 0), ctx);
+}
+
+static int emit_insn(const struct bpf_insn *insn,
+		     struct rv_jit_context *ctx,
+		     bool extra_pass)
+{
+	int rvoff, i = insn - ctx->prog->insnsi;
+	u8 code = insn->code;
+	s16 off = insn->off;
+	s32 imm = insn->imm;
+
+	const s8 *dst = bpf2rv32[insn->dst_reg];
+	const s8 *src = bpf2rv32[insn->src_reg];
+	const s8 *tmp1 = bpf2rv32[TMP_REG_1];
+	const s8 *tmp2 = bpf2rv32[TMP_REG_2];
+
+	switch (code) {
+	case BPF_ALU64 | BPF_MOV | BPF_X:
+
+	case BPF_ALU64 | BPF_ADD | BPF_X:
+	case BPF_ALU64 | BPF_ADD | BPF_K:
+
+	case BPF_ALU64 | BPF_SUB | BPF_X:
+	case BPF_ALU64 | BPF_SUB | BPF_K:
+
+	case BPF_ALU64 | BPF_AND | BPF_X:
+	case BPF_ALU64 | BPF_AND | BPF_K:
+
+	case BPF_ALU64 | BPF_OR | BPF_X:
+	case BPF_ALU64 | BPF_OR | BPF_K:
+
+	case BPF_ALU64 | BPF_XOR | BPF_X:
+	case BPF_ALU64 | BPF_XOR | BPF_K:
+
+	case BPF_ALU64 | BPF_MUL | BPF_X:
+	case BPF_ALU64 | BPF_MUL | BPF_K:
+
+	case BPF_ALU64 | BPF_LSH | BPF_X:
+	case BPF_ALU64 | BPF_LSH | BPF_K:
+
+	case BPF_ALU64 | BPF_RSH | BPF_X:
+	case BPF_ALU64 | BPF_RSH | BPF_K:
+
+	case BPF_ALU64 | BPF_ARSH | BPF_X:
+	case BPF_ALU64 | BPF_ARSH | BPF_K:
+		if (BPF_SRC(code) == BPF_K) {
+			emit_imm32(tmp2, imm, ctx);
+			src = tmp2;
+		}
+		emit_rv32_alu_r64(dst, src, ctx, BPF_OP(code));
+		break;
+
+	case BPF_ALU64 | BPF_NEG:
+		emit_rv32_alu_r64(dst, tmp2, ctx, BPF_OP(code));
+		break;
+
+	case BPF_ALU64 | BPF_DIV | BPF_X:
+	case BPF_ALU64 | BPF_DIV | BPF_K:
+	case BPF_ALU64 | BPF_MOD | BPF_X:
+	case BPF_ALU64 | BPF_MOD | BPF_K:
+		goto notsupported;
+
+	case BPF_ALU64 | BPF_MOV | BPF_K:
+		emit_rv32_alu_i64(dst, imm, ctx, BPF_OP(code));
+		break;
+
+	case BPF_ALU | BPF_MOV | BPF_X:
+
+	case BPF_ALU | BPF_ADD | BPF_X:
+	case BPF_ALU | BPF_ADD | BPF_K:
+
+	case BPF_ALU | BPF_SUB | BPF_X:
+	case BPF_ALU | BPF_SUB | BPF_K:
+
+	case BPF_ALU | BPF_AND | BPF_X:
+	case BPF_ALU | BPF_AND | BPF_K:
+
+	case BPF_ALU | BPF_OR | BPF_X:
+	case BPF_ALU | BPF_OR | BPF_K:
+
+	case BPF_ALU | BPF_XOR | BPF_X:
+	case BPF_ALU | BPF_XOR | BPF_K:
+
+	case BPF_ALU | BPF_MUL | BPF_X:
+	case BPF_ALU | BPF_MUL | BPF_K:
+
+	case BPF_ALU | BPF_DIV | BPF_X:
+	case BPF_ALU | BPF_DIV | BPF_K:
+
+	case BPF_ALU | BPF_MOD | BPF_X:
+	case BPF_ALU | BPF_MOD | BPF_K:
+
+	case BPF_ALU | BPF_LSH | BPF_X:
+	case BPF_ALU | BPF_LSH | BPF_K:
+
+	case BPF_ALU | BPF_RSH | BPF_X:
+	case BPF_ALU | BPF_RSH | BPF_K:
+
+	case BPF_ALU | BPF_ARSH | BPF_X:
+	case BPF_ALU | BPF_ARSH | BPF_K:
+		if (BPF_SRC(code) == BPF_K) {
+			emit_imm32(tmp2, imm, ctx);
+			src = tmp2;
+		}
+		emit_rv32_alu_r32(dst, src, ctx, BPF_OP(code));
+		break;
+
+	case BPF_ALU | BPF_MOV | BPF_K:
+		emit_rv32_alu_i32(dst, imm, ctx, BPF_OP(code));
+		break;
+
+	case BPF_ALU | BPF_NEG:
+		/* src is ignored---choose a register known not to be stacked */
+		emit_rv32_alu_r32(dst, tmp2, ctx, BPF_OP(code));
+		break;
+
+	case BPF_ALU | BPF_END | BPF_FROM_LE:
+	{
+		const s8 *rd = rv32_bpf_get_reg64(dst, tmp1, ctx);
+
+		switch (imm) {
+		case 16:
+			emit(rv_slli(rd[1], rd[1], 16), ctx);
+			emit(rv_srli(rd[1], rd[1], 16), ctx);
+			/* Fallthrough to clear high bits. */
+		case 32:
+			emit(rv_addi(rd[0], RV_REG_ZERO, 0), ctx);
+			break;
+		case 64:
+			/* Do nothing. */
+			break;
+		default:
+			pr_err("bpf-jit: BPF_END imm %d invalid\n", imm);
+			return -1;
+		}
+
+		rv32_bpf_put_reg64(dst, rd, ctx);
+		break;
+	}
+
+	case BPF_ALU | BPF_END | BPF_FROM_BE:
+	{
+		const s8 *rd = rv32_bpf_get_reg64(dst, tmp1, ctx);
+
+		switch (imm) {
+		case 16:
+			emit_rv32_rev16(rd[1], ctx);
+			emit(rv_addi(rd[0], RV_REG_ZERO, 0), ctx);
+			break;
+		case 32:
+			emit_rv32_rev32(rd[1], ctx);
+			emit(rv_addi(rd[0], RV_REG_ZERO, 0), ctx);
+			break;
+		case 64:
+			/* Swap upper and lower halves. */
+			emit(rv_addi(RV_REG_T0, rd[1], 0), ctx);
+			emit(rv_addi(rd[1], rd[0], 0), ctx);
+			emit(rv_addi(rd[0], RV_REG_T0, 0), ctx);
+
+			/* Swap each half. */
+			emit_rv32_rev32(rd[1], ctx);
+			emit_rv32_rev32(rd[0], ctx);
+			break;
+		default:
+			pr_err("bpf-jit: BPF_END imm %d invalid\n", imm);
+			return -1;
+		}
+
+		rv32_bpf_put_reg64(dst, rd, ctx);
+		break;
+	}
+
+	case BPF_JMP | BPF_JA:
+		rvoff = rv_offset(i + off, i, ctx);
+		if (!is_21b_int(rvoff)) {
+			pr_err("bpf-jit: insn=%d offset=%d not supported yet!\n",
+			       i, rvoff);
+			return -1;
+		}
+		emit(rv_jal(RV_REG_ZERO, rvoff >> 1), ctx);
+		break;
+
+	case BPF_JMP | BPF_CALL:
+	{
+		bool fixed;
+		int ret;
+		u64 addr;
+		const s8 *r0 = bpf2rv32[BPF_REG_0];
+		const s8 *r5 = bpf2rv32[BPF_REG_5];
+
+		ret = bpf_jit_get_func_addr(ctx->prog, insn, extra_pass, &addr,
+					    &fixed);
+		if (ret < 0)
+			return ret;
+		if (fixed) {
+			emit_imm(RV_REG_T0, (u32) addr, ctx);
+		} else {
+			pr_err("bpf-jit: pseudocall call not supported yet!\n");
+			return -1;
+		}
+
+		/* R1-R4 already in correct reigsters---need to push R5 to stack */
+		emit(rv_addi(RV_REG_SP, RV_REG_SP, -8), ctx);
+		emit(rv_sw(RV_REG_SP, 0, r5[1]), ctx);
+		emit(rv_sw(RV_REG_SP, 4, r5[0]), ctx);
+
+		emit(rv_jalr(RV_REG_RA, RV_REG_T0, 0), ctx);
+
+		/* Set return value */
+		emit(rv_addi(r0[1], RV_REG_A0, 0), ctx);
+		emit(rv_addi(r0[0], RV_REG_A1, 0), ctx);
+		emit(rv_addi(RV_REG_SP, RV_REG_SP, 8), ctx);
+		break;
+	}
+
+	case BPF_JMP | BPF_JEQ | BPF_X:
+	case BPF_JMP | BPF_JEQ | BPF_K:
+	case BPF_JMP32 | BPF_JEQ | BPF_X:
+	case BPF_JMP32 | BPF_JEQ | BPF_K:
+
+	case BPF_JMP | BPF_JNE | BPF_X:
+	case BPF_JMP | BPF_JNE | BPF_K:
+	case BPF_JMP32 | BPF_JNE | BPF_X:
+	case BPF_JMP32 | BPF_JNE | BPF_K:
+
+	case BPF_JMP | BPF_JLE | BPF_X:
+	case BPF_JMP | BPF_JLE | BPF_K:
+	case BPF_JMP32 | BPF_JLE | BPF_X:
+	case BPF_JMP32 | BPF_JLE | BPF_K:
+
+	case BPF_JMP | BPF_JLT | BPF_X:
+	case BPF_JMP | BPF_JLT | BPF_K:
+	case BPF_JMP32 | BPF_JLT | BPF_X:
+	case BPF_JMP32 | BPF_JLT | BPF_K:
+
+	case BPF_JMP | BPF_JGE | BPF_X:
+	case BPF_JMP | BPF_JGE | BPF_K:
+	case BPF_JMP32 | BPF_JGE | BPF_X:
+	case BPF_JMP32 | BPF_JGE | BPF_K:
+
+	case BPF_JMP | BPF_JGT | BPF_X:
+	case BPF_JMP | BPF_JGT | BPF_K:
+	case BPF_JMP32 | BPF_JGT | BPF_X:
+	case BPF_JMP32 | BPF_JGT | BPF_K:
+
+	case BPF_JMP | BPF_JSLE | BPF_X:
+	case BPF_JMP | BPF_JSLE | BPF_K:
+	case BPF_JMP32 | BPF_JSLE | BPF_X:
+	case BPF_JMP32 | BPF_JSLE | BPF_K:
+
+	case BPF_JMP | BPF_JSLT | BPF_X:
+	case BPF_JMP | BPF_JSLT | BPF_K:
+	case BPF_JMP32 | BPF_JSLT | BPF_X:
+	case BPF_JMP32 | BPF_JSLT | BPF_K:
+
+	case BPF_JMP | BPF_JSGE | BPF_X:
+	case BPF_JMP | BPF_JSGE | BPF_K:
+	case BPF_JMP32 | BPF_JSGE | BPF_X:
+	case BPF_JMP32 | BPF_JSGE | BPF_K:
+
+	case BPF_JMP | BPF_JSGT | BPF_X:
+	case BPF_JMP | BPF_JSGT | BPF_K:
+	case BPF_JMP32 | BPF_JSGT | BPF_X:
+	case BPF_JMP32 | BPF_JSGT | BPF_K:
+
+	case BPF_JMP | BPF_JSET | BPF_X:
+	case BPF_JMP | BPF_JSET | BPF_K:
+	case BPF_JMP32 | BPF_JSET | BPF_X:
+	case BPF_JMP32 | BPF_JSET | BPF_K:
+		if (BPF_SRC(code) == BPF_K) {
+			emit_imm32(tmp2, imm, ctx);
+			src = tmp2;
+		}
+		switch (BPF_CLASS(code)) {
+		case BPF_JMP:
+			if (emit_rv32_jump_r64(dst, src, off, i, ctx, BPF_OP(code)))
+				return -1;
+			break;
+		case BPF_JMP32:
+			if (emit_rv32_jump_r32(dst, src, off, i, ctx, BPF_OP(code)))
+				return -1;
+			break;
+		}
+		break;
+
+	case BPF_JMP | BPF_EXIT:
+		if (i == ctx->prog->len - 1)
+			break;
+
+		rvoff = epilogue_offset(ctx);
+		if (is_21b_check(rvoff, i))
+			return -1;
+		emit(rv_jal(RV_REG_ZERO, rvoff >> 1), ctx);
+		break;
+
+	case BPF_LD | BPF_IMM | BPF_DW:
+	{
+		struct bpf_insn insn1 = insn[1];
+		s32 imm_lo = imm;
+		s32 imm_hi = insn1.imm;
+		const s8 *rd = rv32_bpf_get_reg64(dst, tmp1, ctx);
+
+		emit_imm64(rd, imm_hi, imm_lo, ctx);
+		rv32_bpf_put_reg64(dst, rd, ctx);
+		return 1;
+	}
+
+	case BPF_LDX | BPF_MEM | BPF_B:
+	case BPF_LDX | BPF_MEM | BPF_H:
+	case BPF_LDX | BPF_MEM | BPF_W:
+	case BPF_LDX | BPF_MEM | BPF_DW:
+		if (emit_rv32_load_r64(dst, src, off, ctx, BPF_SIZE(code)))
+			return -1;
+		break;
+
+
+	case BPF_ST | BPF_MEM | BPF_B:
+	case BPF_STX | BPF_MEM | BPF_B:
+	case BPF_ST | BPF_MEM | BPF_H:
+	case BPF_STX | BPF_MEM | BPF_H:
+	case BPF_ST | BPF_MEM | BPF_W:
+	case BPF_STX | BPF_MEM | BPF_W:
+	case BPF_ST | BPF_MEM | BPF_DW:
+	case BPF_STX | BPF_MEM | BPF_DW:
+
+	case BPF_STX | BPF_XADD | BPF_W:
+		if (BPF_CLASS(code) == BPF_ST) {
+			emit_imm32(tmp2, imm, ctx);
+			src = tmp2;
+		}
+
+		if (emit_rv32_store_r64(dst, src, off, ctx, BPF_SIZE(code), BPF_MODE(code)))
+			return -1;
+		break;
+
+	case BPF_STX | BPF_XADD | BPF_DW:
+		goto notsupported;
+
+notsupported:
+		pr_info_once("*** NOT SUPPORTED: opcode %02x ***\n", code);
+		return -EFAULT;
+
+	default:
+		pr_err("bpf-jit: unknown opcode %02x\n", code);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void build_prologue(struct rv_jit_context *ctx)
+{
+	int stack_adjust = 32, store_offset, bpf_stack_adjust;
+
+	stack_adjust = round_up(stack_adjust, 16);
+	bpf_stack_adjust = round_up(ctx->prog->aux->stack_depth, 16);
+	stack_adjust += bpf_stack_adjust;
+
+	store_offset = stack_adjust - 8;
+
+	stack_adjust += 4 * BPF_JIT_SCRATCH_REGS;
+
+	emit(rv_addi(RV_REG_SP, RV_REG_SP, -stack_adjust), ctx);
+
+	/* Save callee-save registers */
+	emit(rv_sw(RV_REG_SP, store_offset - 0, RV_REG_RA), ctx);
+	emit(rv_sw(RV_REG_SP, store_offset - 4, RV_REG_FP), ctx);
+	emit(rv_sw(RV_REG_SP, store_offset - 8, RV_REG_S1), ctx);
+	emit(rv_sw(RV_REG_SP, store_offset - 12, RV_REG_S2), ctx);
+	emit(rv_sw(RV_REG_SP, store_offset - 16, RV_REG_S3), ctx);
+	emit(rv_sw(RV_REG_SP, store_offset - 20, RV_REG_S4), ctx);
+	emit(rv_sw(RV_REG_SP, store_offset - 24, RV_REG_S5), ctx);
+	emit(rv_sw(RV_REG_SP, store_offset - 28, RV_REG_S6), ctx);
+
+	emit(rv_addi(RV_REG_FP, RV_REG_SP, stack_adjust), ctx);
+
+	/* Set up BPF stack pointer */
+	emit(rv_addi(bpf2rv32[BPF_REG_FP][1], RV_REG_SP, bpf_stack_adjust), ctx);
+	emit(rv_addi(bpf2rv32[BPF_REG_FP][0], RV_REG_ZERO, 0), ctx);
+
+	/* Set up context pointer */
+	emit(rv_addi(bpf2rv32[BPF_REG_1][1], RV_REG_A0, 0), ctx);
+	emit(rv_addi(bpf2rv32[BPF_REG_1][0], RV_REG_ZERO, 0), ctx);
+
+	ctx->stack_size = stack_adjust;
+}
+
+static int build_body(struct rv_jit_context *ctx, bool extra_pass)
+{
+	const struct bpf_prog *prog = ctx->prog;
+	int i;
+
+	for (i = 0; i < prog->len; i++) {
+		const struct bpf_insn *insn = &prog->insnsi[i];
+		int ret;
+
+		ret = emit_insn(insn, ctx, extra_pass);
+		if (ret > 0) {
+			i++;
+			if (ctx->insns == NULL)
+				ctx->offset[i] = ctx->ninsns;
+			continue;
+		}
+		if (ctx->insns == NULL)
+			ctx->offset[i] = ctx->ninsns;
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+static void bpf_fill_ill_insns(void *area, unsigned int size)
+{
+	memset(area, 0, size);
+}
+
+static void bpf_flush_icache(void *start, void *end)
+{
+	flush_icache_range((unsigned long)start, (unsigned long)end);
+}
+
+struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
+{
+	bool tmp_blinded = false, extra_pass = false;
+	struct bpf_prog *tmp, *orig_prog = prog;
+	struct rv_jit_data *jit_data;
+	struct rv_jit_context *ctx;
+	unsigned int image_size;
+
+	if (!prog->jit_requested)
+		return orig_prog;
+
+	tmp = bpf_jit_blind_constants(prog);
+	if (IS_ERR(tmp))
+		return orig_prog;
+	if (tmp != prog) {
+		tmp_blinded = true;
+		prog = tmp;
+	}
+
+	jit_data = prog->aux->jit_data;
+	if (!jit_data) {
+		jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL);
+		if (!jit_data) {
+			prog = orig_prog;
+			goto out;
+		}
+		prog->aux->jit_data = jit_data;
+	}
+
+	ctx = &jit_data->ctx;
+
+	if (ctx->offset) {
+		extra_pass = true;
+		image_size = sizeof(u32) * ctx->ninsns;
+		goto skip_init_ctx;
+	}
+
+	ctx->prog = prog;
+	ctx->offset = kcalloc(prog->len, sizeof(int), GFP_KERNEL);
+	if (!ctx->offset) {
+		prog = orig_prog;
+		goto out_offset;
+	}
+
+	/* First pass generates the ctx->offset, but does not emit an image. */
+	if (build_body(ctx, extra_pass)) {
+		prog = orig_prog;
+		goto out_offset;
+	}
+	build_prologue(ctx);
+	ctx->epilogue_offset = ctx->ninsns;
+	build_epilogue(ctx);
+
+	/* Allocate image, now that we know the size. */
+	image_size = sizeof(u32) * ctx->ninsns;
+	jit_data->header = bpf_jit_binary_alloc(image_size, &jit_data->image,
+						sizeof(u32),
+						bpf_fill_ill_insns);
+	if (!jit_data->header) {
+		prog = orig_prog;
+		goto out_offset;
+	}
+
+	/* Second, real pass, that acutally emits the image. */
+	ctx->insns = (u32 *)jit_data->image;
+skip_init_ctx:
+	ctx->ninsns = 0;
+
+	build_prologue(ctx);
+	if (build_body(ctx, extra_pass)) {
+		bpf_jit_binary_free(jit_data->header);
+		prog = orig_prog;
+		goto out_offset;
+	}
+	build_epilogue(ctx);
+
+	if (bpf_jit_enable > 1)
+		bpf_jit_dump(prog->len, image_size, 2, ctx->insns);
+
+	prog->bpf_func = (void *)ctx->insns;
+	prog->jited = 1;
+	prog->jited_len = image_size;
+
+	bpf_flush_icache(jit_data->header, ctx->insns + ctx->ninsns);
+
+	if (!prog->is_func || extra_pass) {
+out_offset:
+		kfree(ctx->offset);
+		kfree(jit_data);
+		prog->aux->jit_data = NULL;
+	}
+out:
+	if (tmp_blinded)
+		bpf_jit_prog_release_other(prog, prog == orig_prog ?
+					   tmp : orig_prog);
+	return prog;
+}
-- 
2.20.1


             reply	other threads:[~2019-06-21 22:59 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-21 22:59 Luke Nelson [this message]
2019-06-24 10:11 ` [RFC PATCH bpf-next] RV32G eBPF JIT Björn Töpel
2019-06-26 23:20   ` Luke Nelson
2019-06-24 16:45 ` Jiong Wang
2019-06-25 20:26   ` Luke Nelson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190621225938.27030-1-lukenels@cs.washington.edu \
    --to=lukenels@cs.washington.edu \
    --cc=aou@eecs.berkeley.edu \
    --cc=ast@kernel.org \
    --cc=bjorn.topel@gmail.com \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=kafai@fb.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=luke.r.nels@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=palmer@sifive.com \
    --cc=songliubraving@fb.com \
    --cc=xi.wang@gmail.com \
    --cc=yhs@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).