Netdev Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sean Nyekjaer <sean@geanix.com>,
	Marc Kleine-Budde <mkl@pengutronix.de>,
	Sasha Levin <sashal@kernel.org>,
	linux-can@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.1 38/95] can: mcp251x: add support for mcp25625
Date: Wed, 26 Jun 2019 20:29:23 -0400
Message-ID: <20190627003021.19867-38-sashal@kernel.org> (raw)
In-Reply-To: <20190627003021.19867-1-sashal@kernel.org>

From: Sean Nyekjaer <sean@geanix.com>

[ Upstream commit 35b7fa4d07c43ad79b88e6462119e7140eae955c ]

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch adds support for the mcp25625 to the existing mcp251x driver.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/spi/Kconfig   |  5 +++--
 drivers/net/can/spi/mcp251x.c | 25 ++++++++++++++++---------
 2 files changed, 19 insertions(+), 11 deletions(-)

diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig
index 8f2e0dd7b756..792e9c6c4a2f 100644
--- a/drivers/net/can/spi/Kconfig
+++ b/drivers/net/can/spi/Kconfig
@@ -8,9 +8,10 @@ config CAN_HI311X
 	  Driver for the Holt HI311x SPI CAN controllers.
 
 config CAN_MCP251X
-	tristate "Microchip MCP251x SPI CAN controllers"
+	tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
 	depends on HAS_DMA
 	---help---
-	  Driver for the Microchip MCP251x SPI CAN controllers.
+	  Driver for the Microchip MCP251x and MCP25625 SPI CAN
+	  controllers.
 
 endmenu
diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index e90817608645..da64e71a62ee 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -1,5 +1,5 @@
 /*
- * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ * CAN bus driver for Microchip 251x/25625 CAN Controller with SPI Interface
  *
  * MCP2510 support and bug fixes by Christian Pellegrin
  * <chripell@evolware.org>
@@ -41,7 +41,7 @@
  * static struct spi_board_info spi_board_info[] = {
  *         {
  *                 .modalias = "mcp2510",
- *			// or "mcp2515" depending on your controller
+ *			// "mcp2515" or "mcp25625" depending on your controller
  *                 .platform_data = &mcp251x_info,
  *                 .irq = IRQ_EINT13,
  *                 .max_speed_hz = 2*1000*1000,
@@ -238,6 +238,7 @@ static const struct can_bittiming_const mcp251x_bittiming_const = {
 enum mcp251x_model {
 	CAN_MCP251X_MCP2510	= 0x2510,
 	CAN_MCP251X_MCP2515	= 0x2515,
+	CAN_MCP251X_MCP25625	= 0x25625,
 };
 
 struct mcp251x_priv {
@@ -280,7 +281,6 @@ static inline int mcp251x_is_##_model(struct spi_device *spi) \
 }
 
 MCP251X_IS(2510);
-MCP251X_IS(2515);
 
 static void mcp251x_clean(struct net_device *net)
 {
@@ -639,7 +639,7 @@ static int mcp251x_hw_reset(struct spi_device *spi)
 
 	/* Wait for oscillator startup timer after reset */
 	mdelay(MCP251X_OST_DELAY_MS);
-	
+
 	reg = mcp251x_read_reg(spi, CANSTAT);
 	if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
 		return -ENODEV;
@@ -820,9 +820,8 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 		/* receive buffer 0 */
 		if (intf & CANINTF_RX0IF) {
 			mcp251x_hw_rx(spi, 0);
-			/*
-			 * Free one buffer ASAP
-			 * (The MCP2515 does this automatically.)
+			/* Free one buffer ASAP
+			 * (The MCP2515/25625 does this automatically.)
 			 */
 			if (mcp251x_is_2510(spi))
 				mcp251x_write_bits(spi, CANINTF, CANINTF_RX0IF, 0x00);
@@ -831,7 +830,7 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 		/* receive buffer 1 */
 		if (intf & CANINTF_RX1IF) {
 			mcp251x_hw_rx(spi, 1);
-			/* the MCP2515 does this automatically */
+			/* The MCP2515/25625 does this automatically. */
 			if (mcp251x_is_2510(spi))
 				clear_intf |= CANINTF_RX1IF;
 		}
@@ -1006,6 +1005,10 @@ static const struct of_device_id mcp251x_of_match[] = {
 		.compatible	= "microchip,mcp2515",
 		.data		= (void *)CAN_MCP251X_MCP2515,
 	},
+	{
+		.compatible	= "microchip,mcp25625",
+		.data		= (void *)CAN_MCP251X_MCP25625,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mcp251x_of_match);
@@ -1019,6 +1022,10 @@ static const struct spi_device_id mcp251x_id_table[] = {
 		.name		= "mcp2515",
 		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP2515,
 	},
+	{
+		.name		= "mcp25625",
+		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP25625,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
@@ -1259,5 +1266,5 @@ module_spi_driver(mcp251x_can_driver);
 
 MODULE_AUTHOR("Chris Elston <celston@katalix.com>, "
 	      "Christian Pellegrin <chripell@evolware.org>");
-MODULE_DESCRIPTION("Microchip 251x CAN driver");
+MODULE_DESCRIPTION("Microchip 251x/25625 CAN driver");
 MODULE_LICENSE("GPL v2");
-- 
2.20.1


  parent reply index

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190627003021.19867-1-sashal@kernel.org>
2019-06-27  0:28 ` [PATCH AUTOSEL 5.1 08/95] bpf: fix out-of-bounds read in __bpf_skc_lookup Sasha Levin
2019-06-27  0:28 ` [PATCH AUTOSEL 5.1 09/95] samples, bpf: fix to change the buffer size for read() Sasha Levin
2019-06-27  0:28 ` [PATCH AUTOSEL 5.1 10/95] samples, bpf: suppress compiler warning Sasha Levin
2019-06-27  0:28 ` [PATCH AUTOSEL 5.1 11/95] bpf, riscv: clear target register high 32-bits for and/or/xor on ALU32 Sasha Levin
2019-06-27  0:28 ` [PATCH AUTOSEL 5.1 12/95] bpf: sockmap, restore sk_write_space when psock gets dropped Sasha Levin
2019-06-27  0:28 ` [PATCH AUTOSEL 5.1 13/95] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he() Sasha Levin
2019-06-27  0:28 ` [PATCH AUTOSEL 5.1 14/95] bpf: sockmap, fix use after free from sleep in psock backlog workqueue Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 19/95] mac80211: mesh: fix RCU warning Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 20/95] mac80211: free peer keys before vif down in mesh Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 22/95] mwifiex: Fix possible buffer overflows at parsing bss descriptor Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 23/95] mwifiex: Abort at too short BSS descriptor element Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 24/95] bpf, riscv: clear high 32 bits for ALU32 add/sub/neg/lsh/rsh/arsh Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 25/95] iwlwifi: fix load in rfkill flow for unified firmware Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 26/95] iwlwifi: clear persistence bit according to device family Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 27/95] iwlwifi: fix AX201 killer sku loading firmware issue Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 28/95] iwlwifi: Fix double-free problems in iwl_req_fw_callback() Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 29/95] mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies() Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 30/95] bpf: udp: ipv6: Avoid running reuseport's bpf_prog from __udp6_lib_err Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 31/95] bpf: udp: Avoid calling reuseport's bpf_prog from udp_gro Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 32/95] netfilter: ipv6: nf_defrag: fix leakage of unqueued fragments Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 33/95] tools: bpftool: Fix JSON output when lookup fails Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 36/95] netfilter: ipv6: nf_defrag: accept duplicate fragments again Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 37/95] dt-bindings: can: mcp251x: add mcp25625 support Sasha Levin
2019-06-27  0:29 ` Sasha Levin [this message]
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 39/95] can: m_can: implement errata "Needless activation of MRAF irq" Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 40/95] can: af_can: Fix error path of can_init() Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 41/95] can: flexcan: Remove unneeded registration message Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 42/95] net: phy: rename Asix Electronics PHY driver Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 43/95] ibmvnic: Do not close unopened driver during reset Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 44/95] ibmvnic: Refresh device multicast list after reset Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 45/95] ibmvnic: Fix unchecked return codes of memory allocations Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 48/95] bpf: lpm_trie: check left child of last leftmost node for NULL Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 54/95] xdp: check device pointer before clearing Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 56/95] mlxsw: spectrum: Disallow prio-tagged packets when PVID is removed Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 58/95] bpf: fix div64 overflow tests to properly detect errors Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 64/95] mac80211: only warn once on chanctx_conf being NULL Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 65/95] mac80211: do not start any work during reconfigure flow Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 66/95] cfg80211: util: fix bit count off by one Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 67/95] cfg80211: report measurement start TSF correctly Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 68/95] bpf, devmap: Fix premature entry free on destroying map Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 69/95] bpf, devmap: Add missing bulk queue free Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 70/95] bpf, devmap: Add missing RCU read lock on flush Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 71/95] bpf, x64: fix stack layout of JITed bpf code Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 72/95] qmi_wwan: add support for QMAP padding in the RX path Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 73/95] qmi_wwan: avoid RCU stalls on device disconnect when in QMAP mode Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 74/95] qmi_wwan: extend permitted QMAP mux_id value range Sasha Levin
2019-06-27  0:30 ` [PATCH AUTOSEL 5.1 75/95] bpf: fix nested bpf tracepoints with per-cpu data Sasha Levin
2019-06-27  0:30 ` [PATCH AUTOSEL 5.1 84/95] bnx2x: Check if transceiver implements DDM before access Sasha Levin
2019-06-27  0:30 ` [PATCH AUTOSEL 5.1 86/95] ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL Sasha Levin
2019-06-27  0:30 ` [PATCH AUTOSEL 5.1 87/95] net: lio_core: fix potential sign-extension overflow on large shift Sasha Levin
2019-06-27  0:30 ` [PATCH AUTOSEL 5.1 92/95] net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge() Sasha Levin
2019-06-27  0:30 ` [PATCH AUTOSEL 5.1 95/95] net :sunrpc :clnt :Fix xps refcount imbalance on the error path Sasha Levin

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190627003021.19867-38-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=sean@geanix.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Netdev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netdev/0 netdev/git/0.git
	git clone --mirror https://lore.kernel.org/netdev/1 netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ https://lore.kernel.org/netdev \
		netdev@vger.kernel.org netdev@archiver.kernel.org
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netdev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox