Netdev Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>,
	Sudarsana Reddy Kalluru <skalluru@marvell.com>,
	"David S . Miller" <davem@davemloft.net>,
	Sasha Levin <sashal@kernel.org>,
	netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 52/60] bnx2x: Check if transceiver implements DDM before access
Date: Wed, 26 Jun 2019 20:36:07 -0400
Message-ID: <20190627003616.20767-52-sashal@kernel.org> (raw)
In-Reply-To: <20190627003616.20767-1-sashal@kernel.org>

From: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>

[ Upstream commit cf18cecca911c0db96b868072665347efe6df46f ]

Some transceivers may comply with SFF-8472 even though they do not
implement the Digital Diagnostic Monitoring (DDM) interface described in
the spec. The existence of such area is specified by the 6th bit of byte
92, set to 1 if implemented.

Currently, without checking this bit, bnx2x fails trying to read sfp
module's EEPROM with the follow message:

ethtool -m enP5p1s0f1
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it is assumed
to exist the DDM data.

This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM
data was confirmed by Mellanox as correct and similar to other Passive
DACs from other manufacturers.

Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 3 ++-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h    | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index a4a90b6cdb46..c428b0655c26 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -1581,7 +1581,8 @@ static int bnx2x_get_module_info(struct net_device *dev,
 	}
 
 	if (!sff8472_comp ||
-	    (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ)) {
+	    (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ) ||
+	    !(diag_type & SFP_EEPROM_DDM_IMPLEMENTED)) {
 		modinfo->type = ETH_MODULE_SFF_8079;
 		modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
 	} else {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
index b7d251108c19..7115f5025664 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
@@ -62,6 +62,7 @@
 #define SFP_EEPROM_DIAG_TYPE_ADDR		0x5c
 #define SFP_EEPROM_DIAG_TYPE_SIZE		1
 #define SFP_EEPROM_DIAG_ADDR_CHANGE_REQ		(1<<2)
+#define SFP_EEPROM_DDM_IMPLEMENTED		(1<<6)
 #define SFP_EEPROM_SFF_8472_COMP_ADDR		0x5e
 #define SFP_EEPROM_SFF_8472_COMP_SIZE		1
 
-- 
2.20.1


  parent reply index

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190627003616.20767-1-sashal@kernel.org>
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 04/60] samples, bpf: fix to change the buffer size for read() Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 05/60] samples, bpf: suppress compiler warning Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 06/60] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he() Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 07/60] bpf: sockmap, fix use after free from sleep in psock backlog workqueue Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 11/60] mac80211: mesh: fix RCU warning Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 12/60] mac80211: free peer keys before vif down in mesh Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 13/60] mwifiex: Fix possible buffer overflows at parsing bss descriptor Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 14/60] mwifiex: Abort at too short BSS descriptor element Sasha Levin
2019-06-28 22:58   ` Brian Norris
2019-07-10 14:51     ` Sasha Levin
2019-07-10 21:12       ` Brian Norris
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 15/60] iwlwifi: Fix double-free problems in iwl_req_fw_callback() Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 16/60] mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies() Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 17/60] bpf: udp: Avoid calling reuseport's bpf_prog from udp_gro Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 18/60] netfilter: ipv6: nf_defrag: fix leakage of unqueued fragments Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 20/60] netfilter: ipv6: nf_defrag: accept duplicate fragments again Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 21/60] dt-bindings: can: mcp251x: add mcp25625 support Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 22/60] can: mcp251x: add support for mcp25625 Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 23/60] can: m_can: implement errata "Needless activation of MRAF irq" Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 24/60] can: af_can: Fix error path of can_init() Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 25/60] net: phy: rename Asix Electronics PHY driver Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 26/60] ibmvnic: Do not close unopened driver during reset Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 27/60] ibmvnic: Refresh device multicast list after reset Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 28/60] ibmvnic: Fix unchecked return codes of memory allocations Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 31/60] bpf: lpm_trie: check left child of last leftmost node for NULL Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 37/60] mlxsw: spectrum: Disallow prio-tagged packets when PVID is removed Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 40/60] mac80211: only warn once on chanctx_conf being NULL Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 41/60] mac80211: do not start any work during reconfigure flow Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 42/60] bpf, devmap: Fix premature entry free on destroying map Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 43/60] bpf, devmap: Add missing bulk queue free Sasha Levin
2019-06-27  0:35 ` [PATCH AUTOSEL 4.19 44/60] bpf, devmap: Add missing RCU read lock on flush Sasha Levin
2019-06-27  0:36 ` [PATCH AUTOSEL 4.19 45/60] bpf, x64: fix stack layout of JITed bpf code Sasha Levin
2019-06-27  0:36 ` [PATCH AUTOSEL 4.19 46/60] qmi_wwan: add support for QMAP padding in the RX path Sasha Levin
2019-06-27  0:36 ` [PATCH AUTOSEL 4.19 47/60] qmi_wwan: avoid RCU stalls on device disconnect when in QMAP mode Sasha Levin
2019-06-27  0:36 ` [PATCH AUTOSEL 4.19 48/60] qmi_wwan: extend permitted QMAP mux_id value range Sasha Levin
2019-06-27  0:36 ` [PATCH AUTOSEL 4.19 49/60] bpf: fix nested bpf tracepoints with per-cpu data Sasha Levin
2019-06-27  0:36 ` Sasha Levin [this message]
2019-06-27  0:36 ` [PATCH AUTOSEL 4.19 54/60] ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL Sasha Levin
2019-06-27  0:36 ` [PATCH AUTOSEL 4.19 55/60] net: lio_core: fix potential sign-extension overflow on large shift Sasha Levin
2019-06-27  0:36 ` [PATCH AUTOSEL 4.19 58/60] net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge() Sasha Levin
2019-06-27  0:36 ` [PATCH AUTOSEL 4.19 60/60] net :sunrpc :clnt :Fix xps refcount imbalance on the error path Sasha Levin

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190627003616.20767-52-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maurosr@linux.vnet.ibm.com \
    --cc=netdev@vger.kernel.org \
    --cc=skalluru@marvell.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Netdev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netdev/0 netdev/git/0.git
	git clone --mirror https://lore.kernel.org/netdev/1 netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ https://lore.kernel.org/netdev \
		netdev@vger.kernel.org netdev@archiver.kernel.org
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netdev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox