[PATCH AUTOSEL 4.14 02/35] samples, bpf: fix to change the buffer size for read()

[PATCH AUTOSEL 4.14 02/35] samples, bpf: fix to change the buffer size for read()

[Sasha Levin]

From: Chang-Hsien Tsai <luke.tw@gmail.com>

[ Upstream commit f7c2d64bac1be2ff32f8e4f500c6e5429c1003e0 ]

If the trace for read is larger than 4096, the return
value sz will be 4096. This results in off-by-one error
on buf:

    static char buf[4096];
    ssize_t sz;

    sz = read(trace_fd, buf, sizeof(buf));
    if (sz > 0) {
        buf[sz] = 0;
        puts(buf);
    }

Signed-off-by: Chang-Hsien Tsai <luke.tw@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/bpf_load.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/samples/bpf/bpf_load.c b/samples/bpf/bpf_load.c
index 2325d7ad76df..e8e8b756dc52 100644
--- a/samples/bpf/bpf_load.c
+++ b/samples/bpf/bpf_load.c
@@ -613,7 +613,7 @@ void read_trace_pipe(void)
 		static char buf[4096];
 		ssize_t sz;
 
-		sz = read(trace_fd, buf, sizeof(buf));
+		sz = read(trace_fd, buf, sizeof(buf) - 1);
 		if (sz > 0) {
 			buf[sz] = 0;
 			puts(buf);
-- 
2.20.1

[PATCH AUTOSEL 4.14 03/35] bpf: sockmap, fix use after free from sleep in psock backlog workqueue

[Sasha Levin]

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit bd95e678e0f6e18351ecdc147ca819145db9ed7b ]

Backlog work for psock (sk_psock_backlog) might sleep while waiting
for memory to free up when sending packets. However, while sleeping
the socket may be closed and removed from the map by the user space
side.

This breaks an assumption in sk_stream_wait_memory, which expects the
wait queue to be still there when it wakes up resulting in a
use-after-free shown below. To fix his mark sendmsg as MSG_DONTWAIT
to avoid the sleep altogether. We already set the flag for the
sendpage case but we missed the case were sendmsg is used.
Sockmap is currently the only user of skb_send_sock_locked() so only
the sockmap paths should be impacted.

==================================================================
BUG: KASAN: use-after-free in remove_wait_queue+0x31/0x70
Write of size 8 at addr ffff888069a0c4e8 by task kworker/0:2/110

CPU: 0 PID: 110 Comm: kworker/0:2 Not tainted 5.0.0-rc2-00335-g28f9d1a3d4fe-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
Workqueue: events sk_psock_backlog
Call Trace:
 print_address_description+0x6e/0x2b0
 ? remove_wait_queue+0x31/0x70
 kasan_report+0xfd/0x177
 ? remove_wait_queue+0x31/0x70
 ? remove_wait_queue+0x31/0x70
 remove_wait_queue+0x31/0x70
 sk_stream_wait_memory+0x4dd/0x5f0
 ? sk_stream_wait_close+0x1b0/0x1b0
 ? wait_woken+0xc0/0xc0
 ? tcp_current_mss+0xc5/0x110
 tcp_sendmsg_locked+0x634/0x15d0
 ? tcp_set_state+0x2e0/0x2e0
 ? __kasan_slab_free+0x1d1/0x230
 ? kmem_cache_free+0x70/0x140
 ? sk_psock_backlog+0x40c/0x4b0
 ? process_one_work+0x40b/0x660
 ? worker_thread+0x82/0x680
 ? kthread+0x1b9/0x1e0
 ? ret_from_fork+0x1f/0x30
 ? check_preempt_curr+0xaf/0x130
 ? iov_iter_kvec+0x5f/0x70
 ? kernel_sendmsg_locked+0xa0/0xe0
 skb_send_sock_locked+0x273/0x3c0
 ? skb_splice_bits+0x180/0x180
 ? start_thread+0xe0/0xe0
 ? update_min_vruntime.constprop.27+0x88/0xc0
 sk_psock_backlog+0xb3/0x4b0
 ? strscpy+0xbf/0x1e0
 process_one_work+0x40b/0x660
 worker_thread+0x82/0x680
 ? process_one_work+0x660/0x660
 kthread+0x1b9/0x1e0
 ? __kthread_create_on_node+0x250/0x250
 ret_from_fork+0x1f/0x30

Fixes: 20bf50de3028c ("skbuff: Function to send an skbuf on a socket")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 2b3b0307dd89..6d9fd7d4bdfa 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2299,6 +2299,7 @@ int skb_send_sock_locked(struct sock *sk, struct sk_buff *skb, int offset,
 		kv.iov_base = skb->data + offset;
 		kv.iov_len = slen;
 		memset(&msg, 0, sizeof(msg));
+		msg.msg_flags = MSG_DONTWAIT;
 
 		ret = kernel_sendmsg_locked(sk, &msg, &kv, 1, slen);
 		if (ret <= 0)
-- 
2.20.1

[PATCH AUTOSEL 4.14 05/35] mac80211: mesh: fix RCU warning

[Sasha Levin]

From: Thomas Pedersen <thomas@eero.com>

[ Upstream commit 551842446ed695641a00782cd118cbb064a416a1 ]

ifmsh->csa is an RCU-protected pointer. The writer context
in ieee80211_mesh_finish_csa() is already mutually
exclusive with wdev->sdata.mtx, but the RCU checker did
not know this. Use rcu_dereference_protected() to avoid a
warning.

fixes the following warning:

[   12.519089] =============================
[   12.520042] WARNING: suspicious RCU usage
[   12.520652] 5.1.0-rc7-wt+ #16 Tainted: G        W
[   12.521409] -----------------------------
[   12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage!
[   12.522928] other info that might help us debug this:
[   12.523984] rcu_scheduler_active = 2, debug_locks = 1
[   12.524855] 5 locks held by kworker/u8:2/152:
[   12.525438]  #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620
[   12.526607]  #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620
[   12.528001]  #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90
[   12.529116]  #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90
[   12.530233]  #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90

Signed-off-by: Thomas Pedersen <thomas@eero.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 96e57d7c2872..aca054539f4a 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1209,7 +1209,8 @@ int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
 	ifmsh->chsw_ttl = 0;
 
 	/* Remove the CSA and MCSP elements from the beacon */
-	tmp_csa_settings = rcu_dereference(ifmsh->csa);
+	tmp_csa_settings = rcu_dereference_protected(ifmsh->csa,
+					    lockdep_is_held(&sdata->wdev.mtx));
 	RCU_INIT_POINTER(ifmsh->csa, NULL);
 	if (tmp_csa_settings)
 		kfree_rcu(tmp_csa_settings, rcu_head);
@@ -1231,6 +1232,8 @@ int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
 	struct mesh_csa_settings *tmp_csa_settings;
 	int ret = 0;
 
+	lockdep_assert_held(&sdata->wdev.mtx);
+
 	tmp_csa_settings = kmalloc(sizeof(*tmp_csa_settings),
 				   GFP_ATOMIC);
 	if (!tmp_csa_settings)
-- 
2.20.1

[PATCH AUTOSEL 4.14 06/35] mac80211: free peer keys before vif down in mesh

[Sasha Levin]

From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>

[ Upstream commit 0112fa557c3bb3a002bc85760dc3761d737264d3 ]

freeing peer keys after vif down is resulting in peer key uninstall
to fail due to interface lookup failure. so fix that.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index aca054539f4a..c6edae051e9b 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -922,6 +922,7 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 
 	/* flush STAs and mpaths on this iface */
 	sta_info_flush(sdata);
+	ieee80211_free_keys(sdata, true);
 	mesh_path_flush_by_iface(sdata);
 
 	/* stop the beacon */
-- 
2.20.1

[PATCH AUTOSEL 4.14 07/35] mwifiex: Fix possible buffer overflows at parsing bss descriptor

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 13ec7f10b87f5fc04c4ccbd491c94c7980236a74 ]

mwifiex_update_bss_desc_with_ie() calls memcpy() unconditionally in
a couple places without checking the destination size.  Since the
source is given from user-space, this may trigger a heap buffer
overflow.

Fix it by putting the length check before performing memcpy().

This fix addresses CVE-2019-3846.

Reported-by: huangwen <huangwen@venustech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/scan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c
index c9d41ed77fc7..c08a4574c396 100644
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -1244,6 +1244,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 		}
 		switch (element_id) {
 		case WLAN_EID_SSID:
+			if (element_len > IEEE80211_MAX_SSID_LEN)
+				return -EINVAL;
 			bss_entry->ssid.ssid_len = element_len;
 			memcpy(bss_entry->ssid.ssid, (current_ptr + 2),
 			       element_len);
@@ -1253,6 +1255,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_SUPP_RATES:
+			if (element_len > MWIFIEX_SUPPORTED_RATES)
+				return -EINVAL;
 			memcpy(bss_entry->data_rates, current_ptr + 2,
 			       element_len);
 			memcpy(bss_entry->supported_rates, current_ptr + 2,
-- 
2.20.1

[PATCH AUTOSEL 4.14 08/35] mwifiex: Abort at too short BSS descriptor element

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 685c9b7750bfacd6fc1db50d86579980593b7869 ]

Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that
the source descriptor entries contain the enough size for each type
and performs copying without checking the source size.  This may lead
to read over boundary.

Fix this by putting the source size check in appropriate places.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/scan.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c
index c08a4574c396..2f7f4c9e5993 100644
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -1266,6 +1266,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_FH_PARAMS:
+			if (element_len + 2 < sizeof(*fh_param_set))
+				return -EINVAL;
 			fh_param_set =
 				(struct ieee_types_fh_param_set *) current_ptr;
 			memcpy(&bss_entry->phy_param_set.fh_param_set,
@@ -1274,6 +1276,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_DS_PARAMS:
+			if (element_len + 2 < sizeof(*ds_param_set))
+				return -EINVAL;
 			ds_param_set =
 				(struct ieee_types_ds_param_set *) current_ptr;
 
@@ -1285,6 +1289,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_CF_PARAMS:
+			if (element_len + 2 < sizeof(*cf_param_set))
+				return -EINVAL;
 			cf_param_set =
 				(struct ieee_types_cf_param_set *) current_ptr;
 			memcpy(&bss_entry->ss_param_set.cf_param_set,
@@ -1293,6 +1299,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_IBSS_PARAMS:
+			if (element_len + 2 < sizeof(*ibss_param_set))
+				return -EINVAL;
 			ibss_param_set =
 				(struct ieee_types_ibss_param_set *)
 				current_ptr;
@@ -1302,10 +1310,14 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_ERP_INFO:
+			if (!element_len)
+				return -EINVAL;
 			bss_entry->erp_flags = *(current_ptr + 2);
 			break;
 
 		case WLAN_EID_PWR_CONSTRAINT:
+			if (!element_len)
+				return -EINVAL;
 			bss_entry->local_constraint = *(current_ptr + 2);
 			bss_entry->sensed_11h = true;
 			break;
@@ -1345,6 +1357,9 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_VENDOR_SPECIFIC:
+			if (element_len + 2 < sizeof(vendor_ie->vend_hdr))
+				return -EINVAL;
+
 			vendor_ie = (struct ieee_types_vendor_specific *)
 					current_ptr;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 09/35] iwlwifi: Fix double-free problems in iwl_req_fw_callback()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit a8627176b0de7ba3f4524f641ddff4abf23ae4e4 ]

In the error handling code of iwl_req_fw_callback(), iwl_dealloc_ucode()
is called to free data. In iwl_drv_stop(), iwl_dealloc_ucode() is called
again, which can cause double-free problems.

To fix this bug, the call to iwl_dealloc_ucode() in
iwl_req_fw_callback() is deleted.

This bug is found by a runtime fuzzing tool named FIZZER written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 99676d6c4713..6c10b8c4ddbe 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1509,7 +1509,6 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 	goto free;
 
  out_free_fw:
-	iwl_dealloc_ucode(drv);
 	release_firmware(ucode_raw);
  out_unbind:
 	complete(&drv->request_firmware_complete);
-- 
2.20.1

[PATCH AUTOSEL 4.14 10/35] bpf: udp: Avoid calling reuseport's bpf_prog from udp_gro

[Sasha Levin]

From: Martin KaFai Lau <kafai@fb.com>

[ Upstream commit 257a525fe2e49584842c504a92c27097407f778f ]

When the commit a6024562ffd7 ("udp: Add GRO functions to UDP socket")
added udp[46]_lib_lookup_skb to the udp_gro code path, it broke
the reuseport_select_sock() assumption that skb->data is pointing
to the transport header.

This patch follows an earlier __udp6_lib_err() fix by
passing a NULL skb to avoid calling the reuseport's bpf_prog.

Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/udp.c | 6 +++++-
 net/ipv6/udp.c | 2 +-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index b89920c0f226..54343dc29cb4 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -563,7 +563,11 @@ static inline struct sock *__udp4_lib_lookup_skb(struct sk_buff *skb,
 struct sock *udp4_lib_lookup_skb(struct sk_buff *skb,
 				 __be16 sport, __be16 dport)
 {
-	return __udp4_lib_lookup_skb(skb, sport, dport, &udp_table);
+	const struct iphdr *iph = ip_hdr(skb);
+
+	return __udp4_lib_lookup(dev_net(skb->dev), iph->saddr, sport,
+				 iph->daddr, dport, inet_iif(skb),
+				 inet_sdif(skb), &udp_table, NULL);
 }
 EXPORT_SYMBOL_GPL(udp4_lib_lookup_skb);
 
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 8d185a0fc5af..fa743776c459 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -308,7 +308,7 @@ struct sock *udp6_lib_lookup_skb(struct sk_buff *skb,
 
 	return __udp6_lib_lookup(dev_net(skb->dev), &iph->saddr, sport,
 				 &iph->daddr, dport, inet6_iif(skb),
-				 inet6_sdif(skb), &udp_table, skb);
+				 inet6_sdif(skb), &udp_table, NULL);
 }
 EXPORT_SYMBOL_GPL(udp6_lib_lookup_skb);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 11/35] netfilter: ipv6: nf_defrag: fix leakage of unqueued fragments

[Sasha Levin]

From: Guillaume Nault <gnault@redhat.com>

[ Upstream commit a0d56cb911ca301de81735f1d73c2aab424654ba ]

With commit 997dd9647164 ("net: IP6 defrag: use rbtrees in
nf_conntrack_reasm.c"), nf_ct_frag6_reasm() is now called from
nf_ct_frag6_queue(). With this change, nf_ct_frag6_queue() can fail
after the skb has been added to the fragment queue and
nf_ct_frag6_gather() was adapted to handle this case.

But nf_ct_frag6_queue() can still fail before the fragment has been
queued. nf_ct_frag6_gather() can't handle this case anymore, because it
has no way to know if nf_ct_frag6_queue() queued the fragment before
failing. If it didn't, the skb is lost as the error code is overwritten
with -EINPROGRESS.

Fix this by setting -EINPROGRESS directly in nf_ct_frag6_queue(), so
that nf_ct_frag6_gather() can propagate the error as is.

Fixes: 997dd9647164 ("net: IP6 defrag: use rbtrees in nf_conntrack_reasm.c")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/netfilter/nf_conntrack_reasm.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index cb1b4772dac0..73c29ddcfb95 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -293,7 +293,11 @@ static int nf_ct_frag6_queue(struct frag_queue *fq, struct sk_buff *skb,
 		skb->_skb_refdst = 0UL;
 		err = nf_ct_frag6_reasm(fq, skb, prev, dev);
 		skb->_skb_refdst = orefdst;
-		return err;
+
+		/* After queue has assumed skb ownership, only 0 or
+		 * -EINPROGRESS must be returned.
+		 */
+		return err ? -EINPROGRESS : 0;
 	}
 
 	skb_dst_drop(skb);
@@ -481,12 +485,6 @@ int nf_ct_frag6_gather(struct net *net, struct sk_buff *skb, u32 user)
 		ret = 0;
 	}
 
-	/* after queue has assumed skb ownership, only 0 or -EINPROGRESS
-	 * must be returned.
-	 */
-	if (ret)
-		ret = -EINPROGRESS;
-
 	spin_unlock_bh(&fq->q.lock);
 	inet_frag_put(&fq->q);
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 4.14 12/35] netfilter: ipv6: nf_defrag: accept duplicate fragments again

[Sasha Levin]

From: Guillaume Nault <gnault@redhat.com>

[ Upstream commit 8a3dca632538c550930ce8bafa8c906b130d35cf ]

When fixing the skb leak introduced by the conversion to rbtree, I
forgot about the special case of duplicate fragments. The condition
under the 'insert_error' label isn't effective anymore as
nf_ct_frg6_gather() doesn't override the returned value anymore. So
duplicate fragments now get NF_DROP verdict.

To accept duplicate fragments again, handle them specially as soon as
inet_frag_queue_insert() reports them. Return -EINPROGRESS which will
translate to NF_STOLEN verdict, like any accepted fragment. However,
such packets don't carry any new information and aren't queued, so we
just drop them immediately.

Fixes: a0d56cb911ca ("netfilter: ipv6: nf_defrag: fix leakage of unqueued fragments")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/netfilter/nf_conntrack_reasm.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 73c29ddcfb95..35d5a76867d0 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -265,8 +265,14 @@ static int nf_ct_frag6_queue(struct frag_queue *fq, struct sk_buff *skb,
 
 	prev = fq->q.fragments_tail;
 	err = inet_frag_queue_insert(&fq->q, skb, offset, end);
-	if (err)
+	if (err) {
+		if (err == IPFRAG_DUP) {
+			/* No error for duplicates, pretend they got queued. */
+			kfree_skb(skb);
+			return -EINPROGRESS;
+		}
 		goto insert_error;
+	}
 
 	if (dev)
 		fq->iif = dev->ifindex;
@@ -304,8 +310,6 @@ static int nf_ct_frag6_queue(struct frag_queue *fq, struct sk_buff *skb,
 	return -EINPROGRESS;
 
 insert_error:
-	if (err == IPFRAG_DUP)
-		goto err;
 	inet_frag_kill(&fq->q);
 err:
 	skb_dst_drop(skb);
-- 
2.20.1

[PATCH AUTOSEL 4.14 13/35] dt-bindings: can: mcp251x: add mcp25625 support

[Sasha Levin]

From: Sean Nyekjaer <sean@geanix.com>

[ Upstream commit 0df82dcd55832a99363ab7f9fab954fcacdac3ae ]

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch add the mcp25625 to the device tree bindings documentation.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
index ee3723beb701..33b38716b77f 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -4,6 +4,7 @@ Required properties:
  - compatible: Should be one of the following:
    - "microchip,mcp2510" for MCP2510.
    - "microchip,mcp2515" for MCP2515.
+   - "microchip,mcp25625" for MCP25625.
  - reg: SPI chip select.
  - clocks: The clock feeding the CAN controller.
  - interrupt-parent: The parent interrupt controller.
-- 
2.20.1

[PATCH AUTOSEL 4.14 14/35] can: mcp251x: add support for mcp25625

[Sasha Levin]

From: Sean Nyekjaer <sean@geanix.com>

[ Upstream commit 35b7fa4d07c43ad79b88e6462119e7140eae955c ]

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch adds support for the mcp25625 to the existing mcp251x driver.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/spi/Kconfig   |  5 +++--
 drivers/net/can/spi/mcp251x.c | 25 ++++++++++++++++---------
 2 files changed, 19 insertions(+), 11 deletions(-)

diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig
index 8f2e0dd7b756..792e9c6c4a2f 100644
--- a/drivers/net/can/spi/Kconfig
+++ b/drivers/net/can/spi/Kconfig
@@ -8,9 +8,10 @@ config CAN_HI311X
 	  Driver for the Holt HI311x SPI CAN controllers.
 
 config CAN_MCP251X
-	tristate "Microchip MCP251x SPI CAN controllers"
+	tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
 	depends on HAS_DMA
 	---help---
-	  Driver for the Microchip MCP251x SPI CAN controllers.
+	  Driver for the Microchip MCP251x and MCP25625 SPI CAN
+	  controllers.
 
 endmenu
diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index f3f05fea8e1f..d8c448beab24 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -1,5 +1,5 @@
 /*
- * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ * CAN bus driver for Microchip 251x/25625 CAN Controller with SPI Interface
  *
  * MCP2510 support and bug fixes by Christian Pellegrin
  * <chripell@evolware.org>
@@ -41,7 +41,7 @@
  * static struct spi_board_info spi_board_info[] = {
  *         {
  *                 .modalias = "mcp2510",
- *			// or "mcp2515" depending on your controller
+ *			// "mcp2515" or "mcp25625" depending on your controller
  *                 .platform_data = &mcp251x_info,
  *                 .irq = IRQ_EINT13,
  *                 .max_speed_hz = 2*1000*1000,
@@ -238,6 +238,7 @@ static const struct can_bittiming_const mcp251x_bittiming_const = {
 enum mcp251x_model {
 	CAN_MCP251X_MCP2510	= 0x2510,
 	CAN_MCP251X_MCP2515	= 0x2515,
+	CAN_MCP251X_MCP25625	= 0x25625,
 };
 
 struct mcp251x_priv {
@@ -280,7 +281,6 @@ static inline int mcp251x_is_##_model(struct spi_device *spi) \
 }
 
 MCP251X_IS(2510);
-MCP251X_IS(2515);
 
 static void mcp251x_clean(struct net_device *net)
 {
@@ -640,7 +640,7 @@ static int mcp251x_hw_reset(struct spi_device *spi)
 
 	/* Wait for oscillator startup timer after reset */
 	mdelay(MCP251X_OST_DELAY_MS);
-	
+
 	reg = mcp251x_read_reg(spi, CANSTAT);
 	if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
 		return -ENODEV;
@@ -821,9 +821,8 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 		/* receive buffer 0 */
 		if (intf & CANINTF_RX0IF) {
 			mcp251x_hw_rx(spi, 0);
-			/*
-			 * Free one buffer ASAP
-			 * (The MCP2515 does this automatically.)
+			/* Free one buffer ASAP
+			 * (The MCP2515/25625 does this automatically.)
 			 */
 			if (mcp251x_is_2510(spi))
 				mcp251x_write_bits(spi, CANINTF, CANINTF_RX0IF, 0x00);
@@ -832,7 +831,7 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 		/* receive buffer 1 */
 		if (intf & CANINTF_RX1IF) {
 			mcp251x_hw_rx(spi, 1);
-			/* the MCP2515 does this automatically */
+			/* The MCP2515/25625 does this automatically. */
 			if (mcp251x_is_2510(spi))
 				clear_intf |= CANINTF_RX1IF;
 		}
@@ -1007,6 +1006,10 @@ static const struct of_device_id mcp251x_of_match[] = {
 		.compatible	= "microchip,mcp2515",
 		.data		= (void *)CAN_MCP251X_MCP2515,
 	},
+	{
+		.compatible	= "microchip,mcp25625",
+		.data		= (void *)CAN_MCP251X_MCP25625,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mcp251x_of_match);
@@ -1020,6 +1023,10 @@ static const struct spi_device_id mcp251x_id_table[] = {
 		.name		= "mcp2515",
 		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP2515,
 	},
+	{
+		.name		= "mcp25625",
+		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP25625,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
@@ -1260,5 +1267,5 @@ module_spi_driver(mcp251x_can_driver);
 
 MODULE_AUTHOR("Chris Elston <celston@katalix.com>, "
 	      "Christian Pellegrin <chripell@evolware.org>");
-MODULE_DESCRIPTION("Microchip 251x CAN driver");
+MODULE_DESCRIPTION("Microchip 251x/25625 CAN driver");
 MODULE_LICENSE("GPL v2");
-- 
2.20.1

[PATCH AUTOSEL 4.14 15/35] can: m_can: implement errata "Needless activation of MRAF irq"

[Sasha Levin]

From: Eugen Hristev <eugen.hristev@microchip.com>

[ Upstream commit 3e82f2f34c930a2a0a9e69fdc2de2f2f1388b442 ]

During frame reception while the MCAN is in Error Passive state and the
Receive Error Counter has thevalue MCAN_ECR.REC = 127, it may happen
that MCAN_IR.MRAF is set although there was no Message RAM access
failure. If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is
generated.

Work around:
The Message RAM Access Failure interrupt routine needs to check whether

    MCAN_ECR.RP = '1' and MCAN_ECR.REC = '127'.

In this case, reset MCAN_IR.MRAF. No further action is required.
This affects versions older than 3.2.0

Errata explained on Sama5d2 SoC which includes this hardware block:
http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Family-Silicon-Errata-and-Data-Sheet-Clarification-DS80000803B.pdf
chapter 6.2

Reproducibility: If 2 devices with m_can are connected back to back,
configuring different bitrate on them will lead to interrupt storm on
the receiving side, with error "Message RAM access failure occurred".
Another way is to have a bad hardware connection. Bad wire connection
can lead to this issue as well.

This patch fixes the issue according to provided workaround.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/m_can/m_can.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index d3ce904e929e..ebad93ac8f11 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -818,6 +818,27 @@ static int m_can_poll(struct napi_struct *napi, int quota)
 	if (!irqstatus)
 		goto end;
 
+	/* Errata workaround for issue "Needless activation of MRAF irq"
+	 * During frame reception while the MCAN is in Error Passive state
+	 * and the Receive Error Counter has the value MCAN_ECR.REC = 127,
+	 * it may happen that MCAN_IR.MRAF is set although there was no
+	 * Message RAM access failure.
+	 * If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is generated
+	 * The Message RAM Access Failure interrupt routine needs to check
+	 * whether MCAN_ECR.RP = ’1’ and MCAN_ECR.REC = 127.
+	 * In this case, reset MCAN_IR.MRAF. No further action is required.
+	 */
+	if ((priv->version <= 31) && (irqstatus & IR_MRAF) &&
+	    (m_can_read(priv, M_CAN_ECR) & ECR_RP)) {
+		struct can_berr_counter bec;
+
+		__m_can_get_berr_counter(dev, &bec);
+		if (bec.rxerr == 127) {
+			m_can_write(priv, M_CAN_IR, IR_MRAF);
+			irqstatus &= ~IR_MRAF;
+		}
+	}
+
 	psr = m_can_read(priv, M_CAN_PSR);
 	if (irqstatus & IR_ERR_STATE)
 		work_done += m_can_handle_state_errors(dev, psr);
-- 
2.20.1

[PATCH AUTOSEL 4.14 16/35] can: af_can: Fix error path of can_init()

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit c5a3aed1cd3152429348ee1fe5cdcca65fe901ce ]

This patch add error path for can_init() to avoid possible crash if some
error occurs.

Fixes: 0d66548a10cb ("[CAN]: Add PF_CAN core module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/can/af_can.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/net/can/af_can.c b/net/can/af_can.c
index e3626e8500c2..97fc0e5ec5f3 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -958,6 +958,8 @@ static struct pernet_operations can_pernet_ops __read_mostly = {
 
 static __init int can_init(void)
 {
+	int err;
+
 	/* check for correct padding to be able to use the structs similarly */
 	BUILD_BUG_ON(offsetof(struct can_frame, can_dlc) !=
 		     offsetof(struct canfd_frame, len) ||
@@ -971,15 +973,31 @@ static __init int can_init(void)
 	if (!rcv_cache)
 		return -ENOMEM;
 
-	register_pernet_subsys(&can_pernet_ops);
+	err = register_pernet_subsys(&can_pernet_ops);
+	if (err)
+		goto out_pernet;
 
 	/* protocol register */
-	sock_register(&can_family_ops);
-	register_netdevice_notifier(&can_netdev_notifier);
+	err = sock_register(&can_family_ops);
+	if (err)
+		goto out_sock;
+	err = register_netdevice_notifier(&can_netdev_notifier);
+	if (err)
+		goto out_notifier;
+
 	dev_add_pack(&can_packet);
 	dev_add_pack(&canfd_packet);
 
 	return 0;
+
+out_notifier:
+	sock_unregister(PF_CAN);
+out_sock:
+	unregister_pernet_subsys(&can_pernet_ops);
+out_pernet:
+	kmem_cache_destroy(rcv_cache);
+
+	return err;
 }
 
 static __exit void can_exit(void)
-- 
2.20.1

[PATCH AUTOSEL 4.14 17/35] ibmvnic: Refresh device multicast list after reset

[Sasha Levin]

From: Thomas Falcon <tlfalcon@linux.ibm.com>

[ Upstream commit be32a24372cf162e825332da1a7ccef058d4f20b ]

It was observed that multicast packets were no longer received after
a device reset.  The fix is to resend the current multicast list to
the backing device after recovery.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index c914b338691b..956fbb164e6f 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1489,6 +1489,9 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 		return 0;
 	}
 
+	/* refresh device's multicast list */
+	ibmvnic_set_multi(netdev);
+
 	/* kick napi */
 	for (i = 0; i < adapter->req_rx_queues; i++)
 		napi_schedule(&adapter->napi[i]);
-- 
2.20.1

[PATCH AUTOSEL 4.14 21/35] mlxsw: spectrum: Disallow prio-tagged packets when PVID is removed

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 4b14cc313f076c37b646cee06a85f0db59cf216c ]

When PVID is removed from a bridge port, the Linux bridge drops both
untagged and prio-tagged packets. Align mlxsw with this behavior.

Fixes: 148f472da5db ("mlxsw: reg: Add the Switch Port Acceptable Frame Types register")
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 5acfbe5b8b9d..8ab7a4f98a07 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -911,7 +911,7 @@ static inline void mlxsw_reg_spaft_pack(char *payload, u8 local_port,
 	MLXSW_REG_ZERO(spaft, payload);
 	mlxsw_reg_spaft_local_port_set(payload, local_port);
 	mlxsw_reg_spaft_allow_untagged_set(payload, allow_untagged);
-	mlxsw_reg_spaft_allow_prio_tagged_set(payload, true);
+	mlxsw_reg_spaft_allow_prio_tagged_set(payload, allow_untagged);
 	mlxsw_reg_spaft_allow_tagged_set(payload, true);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 24/35] mac80211: only warn once on chanctx_conf being NULL

[Sasha Levin]

From: Yibo Zhao <yiboz@codeaurora.org>

[ Upstream commit 563572340173865a9a356e6bb02579e6998a876d ]

In multiple SSID cases, it takes time to prepare every AP interface
to be ready in initializing phase. If a sta already knows everything it
needs to join one of the APs and sends authentication to the AP which
is not fully prepared at this point of time, AP's channel context
could be NULL. As a result, warning message occurs.

Even worse, if the AP is under attack via tools such as MDK3 and massive
authentication requests are received in a very short time, console will
be hung due to kernel warning messages.

WARN_ON_ONCE() could be a better way for indicating warning messages
without duplicate messages to flood the console.

Johannes: We still need to address the underlying problem, but we
          don't really have a good handle on it yet. Suppress the
          worst side-effects for now.

Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Yibo Zhao <yiboz@codeaurora.org>
[johannes: add note, change subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 894937bcd479..9765a54d7dbe 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1405,7 +1405,7 @@ ieee80211_get_sband(struct ieee80211_sub_if_data *sdata)
 	rcu_read_lock();
 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 
-	if (WARN_ON(!chanctx_conf)) {
+	if (WARN_ON_ONCE(!chanctx_conf)) {
 		rcu_read_unlock();
 		return NULL;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 25/35] qmi_wwan: add support for QMAP padding in the RX path

[Sasha Levin]

From: Reinhard Speyerer <rspmn@arcor.de>

[ Upstream commit 61356088ace1866a847a727d4d40da7bf00b67fc ]

The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet
driver which does not process QMAP padding in the RX path correctly.
Add support for QMAP padding to qmimux_rx_fixup() according to the
description of the rmnet driver.

Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index c2d6c501dd85..023bb2daa72f 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -153,7 +153,7 @@ static bool qmimux_has_slaves(struct usbnet *dev)
 
 static int qmimux_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 {
-	unsigned int len, offset = 0;
+	unsigned int len, offset = 0, pad_len, pkt_len;
 	struct qmimux_hdr *hdr;
 	struct net_device *net;
 	struct sk_buff *skbn;
@@ -171,10 +171,16 @@ static int qmimux_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		if (hdr->pad & 0x80)
 			goto skip;
 
+		/* extract padding length and check for valid length info */
+		pad_len = hdr->pad & 0x3f;
+		if (len == 0 || pad_len >= len)
+			goto skip;
+		pkt_len = len - pad_len;
+
 		net = qmimux_find_dev(dev, hdr->mux_id);
 		if (!net)
 			goto skip;
-		skbn = netdev_alloc_skb(net, len);
+		skbn = netdev_alloc_skb(net, pkt_len);
 		if (!skbn)
 			return 0;
 		skbn->dev = net;
@@ -191,7 +197,7 @@ static int qmimux_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			goto skip;
 		}
 
-		skb_put_data(skbn, skb->data + offset + qmimux_hdr_sz, len);
+		skb_put_data(skbn, skb->data + offset + qmimux_hdr_sz, pkt_len);
 		if (netif_rx(skbn) != NET_RX_SUCCESS)
 			return 0;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 26/35] qmi_wwan: avoid RCU stalls on device disconnect when in QMAP mode

[Sasha Levin]

From: Reinhard Speyerer <rspmn@arcor.de>

[ Upstream commit a8fdde1cb830e560208af42b6c10750137f53eb3 ]

Switch qmimux_unregister_device() and qmi_wwan_disconnect() to
use unregister_netdevice_queue() and unregister_netdevice_many()
instead of unregister_netdevice(). This avoids RCU stalls which
have been observed on device disconnect in certain setups otherwise.

Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 023bb2daa72f..a77223887022 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -247,13 +247,14 @@ static int qmimux_register_device(struct net_device *real_dev, u8 mux_id)
 	return err;
 }
 
-static void qmimux_unregister_device(struct net_device *dev)
+static void qmimux_unregister_device(struct net_device *dev,
+				     struct list_head *head)
 {
 	struct qmimux_priv *priv = netdev_priv(dev);
 	struct net_device *real_dev = priv->real_dev;
 
 	netdev_upper_dev_unlink(real_dev, dev);
-	unregister_netdevice(dev);
+	unregister_netdevice_queue(dev, head);
 
 	/* Get rid of the reference to real_dev */
 	dev_put(real_dev);
@@ -424,7 +425,7 @@ static ssize_t del_mux_store(struct device *d,  struct device_attribute *attr, c
 		ret = -EINVAL;
 		goto err;
 	}
-	qmimux_unregister_device(del_dev);
+	qmimux_unregister_device(del_dev, NULL);
 
 	if (!qmimux_has_slaves(dev))
 		info->flags &= ~QMI_WWAN_FLAG_MUX;
@@ -1423,6 +1424,7 @@ static void qmi_wwan_disconnect(struct usb_interface *intf)
 	struct qmi_wwan_state *info;
 	struct list_head *iter;
 	struct net_device *ldev;
+	LIST_HEAD(list);
 
 	/* called twice if separate control and data intf */
 	if (!dev)
@@ -1435,8 +1437,9 @@ static void qmi_wwan_disconnect(struct usb_interface *intf)
 		}
 		rcu_read_lock();
 		netdev_for_each_upper_dev_rcu(dev->net, ldev, iter)
-			qmimux_unregister_device(ldev);
+			qmimux_unregister_device(ldev, &list);
 		rcu_read_unlock();
+		unregister_netdevice_many(&list);
 		rtnl_unlock();
 		info->flags &= ~QMI_WWAN_FLAG_MUX;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 27/35] qmi_wwan: extend permitted QMAP mux_id value range

[Sasha Levin]

From: Reinhard Speyerer <rspmn@arcor.de>

[ Upstream commit 36815b416fa48766ac5a98e4b2dc3ebc5887222e ]

Permit mux_id values up to 254 to be used in qmimux_register_device()
for compatibility with ip(8) and the rmnet driver.

Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/ABI/testing/sysfs-class-net-qmi | 4 ++--
 drivers/net/usb/qmi_wwan.c                    | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-class-net-qmi b/Documentation/ABI/testing/sysfs-class-net-qmi
index 7122d6264c49..c310db4ccbc2 100644
--- a/Documentation/ABI/testing/sysfs-class-net-qmi
+++ b/Documentation/ABI/testing/sysfs-class-net-qmi
@@ -29,7 +29,7 @@ Contact:	Bjørn Mork <bjorn@mork.no>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to add a qmap mux
+		Write a number ranging from 1 to 254 to add a qmap mux
 		based network device, supported by recent Qualcomm based
 		modems.
 
@@ -46,5 +46,5 @@ Contact:	Bjørn Mork <bjorn@mork.no>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to delete a previously
+		Write a number ranging from 1 to 254 to delete a previously
 		created qmap mux based network device.
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index a77223887022..65b1ea4f5baf 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -363,8 +363,8 @@ static ssize_t add_mux_store(struct device *d,  struct device_attribute *attr, c
 	if (kstrtou8(buf, 0, &mux_id))
 		return -EINVAL;
 
-	/* mux_id [1 - 0x7f] range empirically found */
-	if (mux_id < 1 || mux_id > 0x7f)
+	/* mux_id [1 - 254] for compatibility with ip(8) and the rmnet driver */
+	if (mux_id < 1 || mux_id > 254)
 		return -EINVAL;
 
 	if (!rtnl_trylock())
-- 
2.20.1

[PATCH AUTOSEL 4.14 29/35] bnx2x: Check if transceiver implements DDM before access

[Sasha Levin]

From: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>

[ Upstream commit cf18cecca911c0db96b868072665347efe6df46f ]

Some transceivers may comply with SFF-8472 even though they do not
implement the Digital Diagnostic Monitoring (DDM) interface described in
the spec. The existence of such area is specified by the 6th bit of byte
92, set to 1 if implemented.

Currently, without checking this bit, bnx2x fails trying to read sfp
module's EEPROM with the follow message:

ethtool -m enP5p1s0f1
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it is assumed
to exist the DDM data.

This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM
data was confirmed by Mellanox as correct and similar to other Passive
DACs from other manufacturers.

Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 3 ++-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h    | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 3fd1085a093f..65bc1929d1a8 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -1581,7 +1581,8 @@ static int bnx2x_get_module_info(struct net_device *dev,
 	}
 
 	if (!sff8472_comp ||
-	    (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ)) {
+	    (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ) ||
+	    !(diag_type & SFP_EEPROM_DDM_IMPLEMENTED)) {
 		modinfo->type = ETH_MODULE_SFF_8079;
 		modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
 	} else {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
index b7d251108c19..7115f5025664 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
@@ -62,6 +62,7 @@
 #define SFP_EEPROM_DIAG_TYPE_ADDR		0x5c
 #define SFP_EEPROM_DIAG_TYPE_SIZE		1
 #define SFP_EEPROM_DIAG_ADDR_CHANGE_REQ		(1<<2)
+#define SFP_EEPROM_DDM_IMPLEMENTED		(1<<6)
 #define SFP_EEPROM_SFF_8472_COMP_ADDR		0x5e
 #define SFP_EEPROM_SFF_8472_COMP_SIZE		1
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 31/35] ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL

[Sasha Levin]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 6f6a8622057c92408930c31698394fae1557b188 ]

A similar fix to Patch "ip_tunnel: allow not to count pkts on tstats by
setting skb's dev to NULL" is also needed by ip6_tunnel.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ip6_tunnel.h | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h
index d66f70f63734..3b0e3cdee1c3 100644
--- a/include/net/ip6_tunnel.h
+++ b/include/net/ip6_tunnel.h
@@ -152,9 +152,12 @@ static inline void ip6tunnel_xmit(struct sock *sk, struct sk_buff *skb,
 	memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
 	pkt_len = skb->len - skb_inner_network_offset(skb);
 	err = ip6_local_out(dev_net(skb_dst(skb)->dev), sk, skb);
-	if (unlikely(net_xmit_eval(err)))
-		pkt_len = -1;
-	iptunnel_xmit_stats(dev, pkt_len);
+
+	if (dev) {
+		if (unlikely(net_xmit_eval(err)))
+			pkt_len = -1;
+		iptunnel_xmit_stats(dev, pkt_len);
+	}
 }
 #endif
 #endif
-- 
2.20.1

[PATCH AUTOSEL 4.14 32/35] net: lio_core: fix potential sign-extension overflow on large shift

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 9476274093a0e79b905f4cd6cf6d149f65e02c17 ]

Left shifting the signed int value 1 by 31 bits has undefined behaviour
and the shift amount oq_no can be as much as 63.  Fix this by using
BIT_ULL(oq_no) instead.

Addresses-Coverity: ("Bad shift operation")
Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/liquidio/lio_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cavium/liquidio/lio_core.c b/drivers/net/ethernet/cavium/liquidio/lio_core.c
index 23f6b60030c5..8c16298a252d 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_core.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_core.c
@@ -854,7 +854,7 @@ static void liquidio_schedule_droq_pkt_handlers(struct octeon_device *oct)
 
 			if (droq->ops.poll_mode) {
 				droq->ops.napi_fn(droq);
-				oct_priv->napi_mask |= (1 << oq_no);
+				oct_priv->napi_mask |= BIT_ULL(oq_no);
 			} else {
 				tasklet_schedule(&oct_priv->droq_tasklet);
 			}
-- 
2.20.1

[PATCH AUTOSEL 4.14 34/35] net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()

[Sasha Levin]

From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>

[ Upstream commit 48620e341659f6e4b978ec229f6944dabe6df709 ]

The comment is correct, but the code ends up moving the bits four
places too far, into the VTUOp field.

Fixes: 11ea809f1a74 (net: dsa: mv88e6xxx: support 256 databases)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/global1_vtu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx/global1_vtu.c b/drivers/net/dsa/mv88e6xxx/global1_vtu.c
index 8c8a0ec3d6e9..f260bd30c73a 100644
--- a/drivers/net/dsa/mv88e6xxx/global1_vtu.c
+++ b/drivers/net/dsa/mv88e6xxx/global1_vtu.c
@@ -416,7 +416,7 @@ int mv88e6185_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
 		 * VTU DBNum[7:4] are located in VTU Operation 11:8
 		 */
 		op |= entry->fid & 0x000f;
-		op |= (entry->fid & 0x00f0) << 8;
+		op |= (entry->fid & 0x00f0) << 4;
 	}
 
 	return mv88e6xxx_g1_vtu_op(chip, op);
-- 
2.20.1

[PATCH AUTOSEL 4.14 35/35] net :sunrpc :clnt :Fix xps refcount imbalance on the error path

[Sasha Levin]

From: Lin Yi <teroincn@163.com>

[ Upstream commit b96226148491505318228ac52624956bd98f9e0c ]

rpc_clnt_add_xprt take a reference to struct rpc_xprt_switch, but forget
to release it before return, may lead to a memory leak.

Signed-off-by: Lin Yi <teroincn@163.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/clnt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 6d118357d9dc..9259529e0412 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -2706,6 +2706,7 @@ int rpc_clnt_add_xprt(struct rpc_clnt *clnt,
 	xprt = xprt_iter_xprt(&clnt->cl_xpi);
 	if (xps == NULL || xprt == NULL) {
 		rcu_read_unlock();
+		xprt_switch_put(xps);
 		return -EAGAIN;
 	}
 	resvport = xprt->resvport;
-- 
2.20.1