[net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2019-08-21

[net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2019-08-21

[Jeff Kirsher]

This series contains updates to i40e driver only.

Arnd Bergmann reduces the stack usage which was causing warnings on
32-bit architectures due to large structure sizes for 2 functions
getting inlined, so use noinline_for_stack to prevent the compilers from
combining the 2 functions.

Mauro S. M. Rodrigues fixes an issue when reading an EEPROM from SFP
modules that comply with SFF-8472 but do not implement the Digital
Diagnostic Monitoring (DDM) interface for i40e.

Huhai found we were not checking the return value for configuring the
transmit ring and continuing with XDP configuration of the transmit
ring.

Beilei fixes an issue of shifting signed 32-bit integers.

Sylwia adds support for "packet drop mode" to the MAC configuration for
admin queue command.  This bit controls the behavior when a no-drop
packet is blocking a TC queue.  Adds support for persistent LLDP by
checking the LLDP flag and reading the LLDP from the NVM when enabled.

Adrian fixes the "recovery mode" check to take into account which device
we are on, since x710 devices have 4 register values to check for status
and x722 devices only have 2 register values to check.

Piotr Azarewicz bumps the supported firmware API version to 1.9 which
extends the PHY access admin queue command support.

Jake makes sure the traffic class stats for a VEB are reset when the VEB
stats are reset.

Slawomir fixes a NULL pointer dereference where the VSI pointer was not
updated before passing it to the i40e_set_vf_mac() when the VF is in a
reset state, so wait for the reset to complete.

Grzegorz removes the i40e_update_dcb_config() which was not using the
correct NVM reads, so call i40e_init_dcb() in its place to correctly
update the DCB configuration.

Piotr Kwapulinski expands the scope of i40e_set_mac_type() since this is
needed during probe to determine if we are in recovery mode.  Fixed the
driver reset path when in recovery mode.

Marcin fixed an issue where we were breaking out of a loop too early
when trying to get the PHY capabilities.

The following are changes since commit 8c40f3b212a373be843a29db608b462af5c3ed5d:
  Merge tag 'mlx5-updates-2019-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 40GbE

Adrian Podlawski (1):
  i40e: check_recovery_mode had wrong if statement

Arnd Bergmann (1):
  i40e: reduce stack usage in i40e_set_fc

Beilei Xing (1):
  i40e: fix shifts of signed values

Grzegorz Siwik (1):
  i40e: Remove function i40e_update_dcb_config()

Jacob Keller (1):
  i40e: reset veb.tc_stats when resetting veb.stats

Marcin Formela (1):
  i40e: fix retrying in i40e_aq_get_phy_capabilities

Mauro S. M. Rodrigues (1):
  i40e: Check if transceiver implements DDM before access

Piotr Azarewicz (2):
  i40e: Update x710 FW API version to 1.9
  i40e: Update x722 FW API version to 1.9

Piotr Kwapulinski (2):
  i40e: make i40e_set_mac_type() public
  i40e: allow reset in recovery mode

Slawomir Laba (1):
  i40e: Fix crash caused by stress setting of VF MAC addresses

Sylwia Wnuczko (2):
  i40e: Add drop mode parameter to set mac config
  i40e: Persistent LLDP support

huhai (1):
  i40e: add check on i40e_configure_tx_ring() return value

 drivers/net/ethernet/intel/i40e/i40e_adminq.c |   4 +-
 .../net/ethernet/intel/i40e/i40e_adminq_cmd.h |  33 ++---
 drivers/net/ethernet/intel/i40e/i40e_common.c | 110 +++++++-------
 drivers/net/ethernet/intel/i40e/i40e_dcb.c    |  18 ++-
 drivers/net/ethernet/intel/i40e/i40e_dcb.h    |   2 +
 .../net/ethernet/intel/i40e/i40e_ethtool.c    |   6 +
 drivers/net/ethernet/intel/i40e/i40e_main.c   | 136 ++++++++++--------
 drivers/net/ethernet/intel/i40e/i40e_nvm.c    | 101 +++++++++++++
 .../net/ethernet/intel/i40e/i40e_prototype.h  |   8 ++
 .../net/ethernet/intel/i40e/i40e_register.h   |  30 ++--
 drivers/net/ethernet/intel/i40e/i40e_type.h   |   3 +
 .../ethernet/intel/i40e/i40e_virtchnl_pf.c    |   7 +-
 12 files changed, 323 insertions(+), 135 deletions(-)

-- 
2.21.0

[net-next 01/15] i40e: reduce stack usage in i40e_set_fc

[Jeff Kirsher]

From: Arnd Bergmann <arnd@arndb.de>

The functions i40e_aq_get_phy_abilities_resp() and i40e_set_fc() both
have giant structure on the stack, which makes each one use stack frames
larger than 500 bytes.

As clang decides one function into the other, we get a warning for
exceeding the frame size limit on 32-bit architectures:

drivers/net/ethernet/intel/i40e/i40e_common.c:1654:23: error: stack frame size of 1116 bytes in function 'i40e_set_fc' [-Werror,-Wframe-larger-than=]

When building with gcc, the inlining does not happen, but i40e_set_fc()
calls i40e_aq_get_phy_abilities_resp() anyway, so they add up on the
kernel stack just as much.

The parts that actually use large stacks don't overlap, so make sure
each one is a separate function, and mark them as noinline_for_stack to
prevent the compilers from combining them again.

Fixes: 0a862b43acc6 ("i40e/i40evf: Add module_types and update_link_info")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c | 91 +++++++++++--------
 1 file changed, 51 insertions(+), 40 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 906cf68d3453..7af1b7477140 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1643,25 +1643,15 @@ enum i40e_status_code i40e_aq_set_phy_config(struct i40e_hw *hw,
 	return status;
 }
 
-/**
- * i40e_set_fc
- * @hw: pointer to the hw struct
- * @aq_failures: buffer to return AdminQ failure information
- * @atomic_restart: whether to enable atomic link restart
- *
- * Set the requested flow control mode using set_phy_config.
- **/
-enum i40e_status_code i40e_set_fc(struct i40e_hw *hw, u8 *aq_failures,
-				  bool atomic_restart)
+static noinline_for_stack enum i40e_status_code
+i40e_set_fc_status(struct i40e_hw *hw,
+		   struct i40e_aq_get_phy_abilities_resp *abilities,
+		   bool atomic_restart)
 {
-	enum i40e_fc_mode fc_mode = hw->fc.requested_mode;
-	struct i40e_aq_get_phy_abilities_resp abilities;
 	struct i40e_aq_set_phy_config config;
-	enum i40e_status_code status;
+	enum i40e_fc_mode fc_mode = hw->fc.requested_mode;
 	u8 pause_mask = 0x0;
 
-	*aq_failures = 0x0;
-
 	switch (fc_mode) {
 	case I40E_FC_FULL:
 		pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_TX;
@@ -1677,6 +1667,48 @@ enum i40e_status_code i40e_set_fc(struct i40e_hw *hw, u8 *aq_failures,
 		break;
 	}
 
+	memset(&config, 0, sizeof(struct i40e_aq_set_phy_config));
+	/* clear the old pause settings */
+	config.abilities = abilities->abilities & ~(I40E_AQ_PHY_FLAG_PAUSE_TX) &
+			   ~(I40E_AQ_PHY_FLAG_PAUSE_RX);
+	/* set the new abilities */
+	config.abilities |= pause_mask;
+	/* If the abilities have changed, then set the new config */
+	if (config.abilities == abilities->abilities)
+		return 0;
+
+	/* Auto restart link so settings take effect */
+	if (atomic_restart)
+		config.abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
+	/* Copy over all the old settings */
+	config.phy_type = abilities->phy_type;
+	config.phy_type_ext = abilities->phy_type_ext;
+	config.link_speed = abilities->link_speed;
+	config.eee_capability = abilities->eee_capability;
+	config.eeer = abilities->eeer_val;
+	config.low_power_ctrl = abilities->d3_lpan;
+	config.fec_config = abilities->fec_cfg_curr_mod_ext_info &
+			    I40E_AQ_PHY_FEC_CONFIG_MASK;
+
+	return i40e_aq_set_phy_config(hw, &config, NULL);
+}
+
+/**
+ * i40e_set_fc
+ * @hw: pointer to the hw struct
+ * @aq_failures: buffer to return AdminQ failure information
+ * @atomic_restart: whether to enable atomic link restart
+ *
+ * Set the requested flow control mode using set_phy_config.
+ **/
+enum i40e_status_code i40e_set_fc(struct i40e_hw *hw, u8 *aq_failures,
+				  bool atomic_restart)
+{
+	struct i40e_aq_get_phy_abilities_resp abilities;
+	enum i40e_status_code status;
+
+	*aq_failures = 0x0;
+
 	/* Get the current phy config */
 	status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
 					      NULL);
@@ -1685,31 +1717,10 @@ enum i40e_status_code i40e_set_fc(struct i40e_hw *hw, u8 *aq_failures,
 		return status;
 	}
 
-	memset(&config, 0, sizeof(struct i40e_aq_set_phy_config));
-	/* clear the old pause settings */
-	config.abilities = abilities.abilities & ~(I40E_AQ_PHY_FLAG_PAUSE_TX) &
-			   ~(I40E_AQ_PHY_FLAG_PAUSE_RX);
-	/* set the new abilities */
-	config.abilities |= pause_mask;
-	/* If the abilities have changed, then set the new config */
-	if (config.abilities != abilities.abilities) {
-		/* Auto restart link so settings take effect */
-		if (atomic_restart)
-			config.abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
-		/* Copy over all the old settings */
-		config.phy_type = abilities.phy_type;
-		config.phy_type_ext = abilities.phy_type_ext;
-		config.link_speed = abilities.link_speed;
-		config.eee_capability = abilities.eee_capability;
-		config.eeer = abilities.eeer_val;
-		config.low_power_ctrl = abilities.d3_lpan;
-		config.fec_config = abilities.fec_cfg_curr_mod_ext_info &
-				    I40E_AQ_PHY_FEC_CONFIG_MASK;
-		status = i40e_aq_set_phy_config(hw, &config, NULL);
+	status = i40e_set_fc_status(hw, &abilities, atomic_restart);
+	if (status)
+		*aq_failures |= I40E_SET_FC_AQ_FAIL_SET;
 
-		if (status)
-			*aq_failures |= I40E_SET_FC_AQ_FAIL_SET;
-	}
 	/* Update the link info */
 	status = i40e_update_link_info(hw);
 	if (status) {
@@ -2537,7 +2548,7 @@ i40e_status i40e_get_link_status(struct i40e_hw *hw, bool *link_up)
  * i40e_updatelink_status - update status of the HW network link
  * @hw: pointer to the hw struct
  **/
-i40e_status i40e_update_link_info(struct i40e_hw *hw)
+noinline_for_stack i40e_status i40e_update_link_info(struct i40e_hw *hw)
 {
 	struct i40e_aq_get_phy_abilities_resp abilities;
 	i40e_status status = 0;
-- 
2.21.0

[net-next 02/15] i40e: Check if transceiver implements DDM before access

[Jeff Kirsher]

From: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>

Similar to the ixgbe issue fixed in:
655c91414579 ("ixgbe: Check DDM existence in transceiver before access)

i40e has the same issue when reading eeprom from SFP's module that comply
with SFF-8472 but not implement the Digital Diagnostic Monitoring (DDM)
interface described in it. The existence of such area is specified by bit
6 of byte 92, set to 1 if implemented.

Without this patch, due to not checking this bit i40e fails to read SFP
module's eeprom with the follow message:

ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.

Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 6 ++++++
 drivers/net/ethernet/intel/i40e/i40e_type.h    | 1 +
 2 files changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 01e4615b1b4b..41e1240acaea 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -5137,6 +5137,12 @@ static int i40e_get_module_info(struct net_device *netdev,
 			/* Module is not SFF-8472 compliant */
 			modinfo->type = ETH_MODULE_SFF_8079;
 			modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+		} else if (!(sff8472_swap & I40E_MODULE_SFF_DDM_IMPLEMENTED)) {
+			/* Module is SFF-8472 compliant but doesn't implement
+			 * Digital Diagnostic Monitoring (DDM).
+			 */
+			modinfo->type = ETH_MODULE_SFF_8079;
+			modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
 		} else {
 			modinfo->type = ETH_MODULE_SFF_8472;
 			modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 8f43aa47c263..2a6219d66771 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -443,6 +443,7 @@ struct i40e_nvm_access {
 #define I40E_MODULE_SFF_8472_COMP	0x5E
 #define I40E_MODULE_SFF_8472_SWAP	0x5C
 #define I40E_MODULE_SFF_ADDR_MODE	0x04
+#define I40E_MODULE_SFF_DDM_IMPLEMENTED 0x40
 #define I40E_MODULE_TYPE_QSFP_PLUS	0x0D
 #define I40E_MODULE_TYPE_QSFP28		0x11
 #define I40E_MODULE_QSFP_MAX_LEN	640
-- 
2.21.0

[net-next 03/15] i40e: add check on i40e_configure_tx_ring() return value

[Jeff Kirsher]

From: huhai <huhai@kylinos.cn>

When i40e_configure_tx_ring(vsi->tx_rings[i]) returns an error, we should
exit from i40e_vsi_configure_tx and return the error, instead of continuing
to check whether xdp is enable, and configure the xdp transmit ring.

Signed-off-by: huhai <huhai@kylinos.cn>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 6d456e579314..b807dd6b1417 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3364,7 +3364,7 @@ static int i40e_vsi_configure_tx(struct i40e_vsi *vsi)
 	for (i = 0; (i < vsi->num_queue_pairs) && !err; i++)
 		err = i40e_configure_tx_ring(vsi->tx_rings[i]);
 
-	if (!i40e_enabled_xdp_vsi(vsi))
+	if (err || !i40e_enabled_xdp_vsi(vsi))
 		return err;
 
 	for (i = 0; (i < vsi->num_queue_pairs) && !err; i++)
-- 
2.21.0

[net-next 04/15] i40e: fix shifts of signed values

[Jeff Kirsher]

From: Beilei Xing <beilei.xing@intel.com>

This patch fixes following error reported by cppcheck:
(error) Shifting signed 32-bit value by 31 bits is undefined behaviour

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 .../net/ethernet/intel/i40e/i40e_register.h   | 24 +++++++++----------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h
index 52e3680c57f8..330ac19a5dae 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_register.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_register.h
@@ -58,7 +58,7 @@
 #define I40E_PF_ARQLEN_ARQCRIT_SHIFT 30
 #define I40E_PF_ARQLEN_ARQCRIT_MASK I40E_MASK(0x1, I40E_PF_ARQLEN_ARQCRIT_SHIFT)
 #define I40E_PF_ARQLEN_ARQENABLE_SHIFT 31
-#define I40E_PF_ARQLEN_ARQENABLE_MASK I40E_MASK(0x1, I40E_PF_ARQLEN_ARQENABLE_SHIFT)
+#define I40E_PF_ARQLEN_ARQENABLE_MASK I40E_MASK(0x1u, I40E_PF_ARQLEN_ARQENABLE_SHIFT)
 #define I40E_PF_ARQT 0x00080480 /* Reset: EMPR */
 #define I40E_PF_ARQT_ARQT_SHIFT 0
 #define I40E_PF_ARQT_ARQT_MASK I40E_MASK(0x3FF, I40E_PF_ARQT_ARQT_SHIFT)
@@ -81,7 +81,7 @@
 #define I40E_PF_ATQLEN_ATQCRIT_SHIFT 30
 #define I40E_PF_ATQLEN_ATQCRIT_MASK I40E_MASK(0x1, I40E_PF_ATQLEN_ATQCRIT_SHIFT)
 #define I40E_PF_ATQLEN_ATQENABLE_SHIFT 31
-#define I40E_PF_ATQLEN_ATQENABLE_MASK I40E_MASK(0x1, I40E_PF_ATQLEN_ATQENABLE_SHIFT)
+#define I40E_PF_ATQLEN_ATQENABLE_MASK I40E_MASK(0x1u, I40E_PF_ATQLEN_ATQENABLE_SHIFT)
 #define I40E_PF_ATQT 0x00080400 /* Reset: EMPR */
 #define I40E_PF_ATQT_ATQT_SHIFT 0
 #define I40E_PF_ATQT_ATQT_MASK I40E_MASK(0x3FF, I40E_PF_ATQT_ATQT_SHIFT)
@@ -108,7 +108,7 @@
 #define I40E_VF_ARQLEN_ARQCRIT_SHIFT 30
 #define I40E_VF_ARQLEN_ARQCRIT_MASK I40E_MASK(0x1, I40E_VF_ARQLEN_ARQCRIT_SHIFT)
 #define I40E_VF_ARQLEN_ARQENABLE_SHIFT 31
-#define I40E_VF_ARQLEN_ARQENABLE_MASK I40E_MASK(0x1, I40E_VF_ARQLEN_ARQENABLE_SHIFT)
+#define I40E_VF_ARQLEN_ARQENABLE_MASK I40E_MASK(0x1u, I40E_VF_ARQLEN_ARQENABLE_SHIFT)
 #define I40E_VF_ARQT(_VF) (0x00082C00 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: EMPR */
 #define I40E_VF_ARQT_MAX_INDEX 127
 #define I40E_VF_ARQT_ARQT_SHIFT 0
@@ -136,7 +136,7 @@
 #define I40E_VF_ATQLEN_ATQCRIT_SHIFT 30
 #define I40E_VF_ATQLEN_ATQCRIT_MASK I40E_MASK(0x1, I40E_VF_ATQLEN_ATQCRIT_SHIFT)
 #define I40E_VF_ATQLEN_ATQENABLE_SHIFT 31
-#define I40E_VF_ATQLEN_ATQENABLE_MASK I40E_MASK(0x1, I40E_VF_ATQLEN_ATQENABLE_SHIFT)
+#define I40E_VF_ATQLEN_ATQENABLE_MASK I40E_MASK(0x1u, I40E_VF_ATQLEN_ATQENABLE_SHIFT)
 #define I40E_VF_ATQT(_VF) (0x00082800 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: EMPR */
 #define I40E_VF_ATQT_MAX_INDEX 127
 #define I40E_VF_ATQT_ATQT_SHIFT 0
@@ -259,7 +259,7 @@
 #define I40E_PRTDCB_RETSTCC_UPINTC_MODE_SHIFT 30
 #define I40E_PRTDCB_RETSTCC_UPINTC_MODE_MASK I40E_MASK(0x1, I40E_PRTDCB_RETSTCC_UPINTC_MODE_SHIFT)
 #define I40E_PRTDCB_RETSTCC_ETSTC_SHIFT 31
-#define I40E_PRTDCB_RETSTCC_ETSTC_MASK I40E_MASK(0x1, I40E_PRTDCB_RETSTCC_ETSTC_SHIFT)
+#define I40E_PRTDCB_RETSTCC_ETSTC_MASK I40E_MASK(0x1u, I40E_PRTDCB_RETSTCC_ETSTC_SHIFT)
 #define I40E_PRTDCB_RPPMC 0x001223A0 /* Reset: CORER */
 #define I40E_PRTDCB_RPPMC_LANRPPM_SHIFT 0
 #define I40E_PRTDCB_RPPMC_LANRPPM_MASK I40E_MASK(0xFF, I40E_PRTDCB_RPPMC_LANRPPM_SHIFT)
@@ -503,7 +503,7 @@
 #define I40E_GLGEN_MSCA_MDICMD_SHIFT 30
 #define I40E_GLGEN_MSCA_MDICMD_MASK I40E_MASK(0x1, I40E_GLGEN_MSCA_MDICMD_SHIFT)
 #define I40E_GLGEN_MSCA_MDIINPROGEN_SHIFT 31
-#define I40E_GLGEN_MSCA_MDIINPROGEN_MASK I40E_MASK(0x1, I40E_GLGEN_MSCA_MDIINPROGEN_SHIFT)
+#define I40E_GLGEN_MSCA_MDIINPROGEN_MASK I40E_MASK(0x1u, I40E_GLGEN_MSCA_MDIINPROGEN_SHIFT)
 #define I40E_GLGEN_MSRWD(_i) (0x0008819C + ((_i) * 4)) /* _i=0...3 */ /* Reset: POR */
 #define I40E_GLGEN_MSRWD_MAX_INDEX 3
 #define I40E_GLGEN_MSRWD_MDIWRDATA_SHIFT 0
@@ -1242,14 +1242,14 @@
 #define I40E_GLLAN_TXPRE_QDIS_SET_QDIS_SHIFT 30
 #define I40E_GLLAN_TXPRE_QDIS_SET_QDIS_MASK I40E_MASK(0x1, I40E_GLLAN_TXPRE_QDIS_SET_QDIS_SHIFT)
 #define I40E_GLLAN_TXPRE_QDIS_CLEAR_QDIS_SHIFT 31
-#define I40E_GLLAN_TXPRE_QDIS_CLEAR_QDIS_MASK I40E_MASK(0x1, I40E_GLLAN_TXPRE_QDIS_CLEAR_QDIS_SHIFT)
+#define I40E_GLLAN_TXPRE_QDIS_CLEAR_QDIS_MASK I40E_MASK(0x1u, I40E_GLLAN_TXPRE_QDIS_CLEAR_QDIS_SHIFT)
 #define I40E_PFLAN_QALLOC 0x001C0400 /* Reset: CORER */
 #define I40E_PFLAN_QALLOC_FIRSTQ_SHIFT 0
 #define I40E_PFLAN_QALLOC_FIRSTQ_MASK I40E_MASK(0x7FF, I40E_PFLAN_QALLOC_FIRSTQ_SHIFT)
 #define I40E_PFLAN_QALLOC_LASTQ_SHIFT 16
 #define I40E_PFLAN_QALLOC_LASTQ_MASK I40E_MASK(0x7FF, I40E_PFLAN_QALLOC_LASTQ_SHIFT)
 #define I40E_PFLAN_QALLOC_VALID_SHIFT 31
-#define I40E_PFLAN_QALLOC_VALID_MASK I40E_MASK(0x1, I40E_PFLAN_QALLOC_VALID_SHIFT)
+#define I40E_PFLAN_QALLOC_VALID_MASK I40E_MASK(0x1u, I40E_PFLAN_QALLOC_VALID_SHIFT)
 #define I40E_QRX_ENA(_Q) (0x00120000 + ((_Q) * 4)) /* _i=0...1535 */ /* Reset: PFR */
 #define I40E_QRX_ENA_MAX_INDEX 1535
 #define I40E_QRX_ENA_QENA_REQ_SHIFT 0
@@ -1658,7 +1658,7 @@
 #define I40E_GLNVM_SRCTL_START_SHIFT 30
 #define I40E_GLNVM_SRCTL_START_MASK I40E_MASK(0x1, I40E_GLNVM_SRCTL_START_SHIFT)
 #define I40E_GLNVM_SRCTL_DONE_SHIFT 31
-#define I40E_GLNVM_SRCTL_DONE_MASK I40E_MASK(0x1, I40E_GLNVM_SRCTL_DONE_SHIFT)
+#define I40E_GLNVM_SRCTL_DONE_MASK I40E_MASK(0x1u, I40E_GLNVM_SRCTL_DONE_SHIFT)
 #define I40E_GLNVM_SRDATA 0x000B6114 /* Reset: POR */
 #define I40E_GLNVM_SRDATA_WRDATA_SHIFT 0
 #define I40E_GLNVM_SRDATA_WRDATA_MASK I40E_MASK(0xFFFF, I40E_GLNVM_SRDATA_WRDATA_SHIFT)
@@ -3025,7 +3025,7 @@
 #define I40E_PF_VT_PFALLOC_LASTVF_SHIFT 8
 #define I40E_PF_VT_PFALLOC_LASTVF_MASK I40E_MASK(0xFF, I40E_PF_VT_PFALLOC_LASTVF_SHIFT)
 #define I40E_PF_VT_PFALLOC_VALID_SHIFT 31
-#define I40E_PF_VT_PFALLOC_VALID_MASK I40E_MASK(0x1, I40E_PF_VT_PFALLOC_VALID_SHIFT)
+#define I40E_PF_VT_PFALLOC_VALID_MASK I40E_MASK(0x1u, I40E_PF_VT_PFALLOC_VALID_SHIFT)
 #define I40E_VP_MDET_RX(_VF) (0x0012A000 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */
 #define I40E_VP_MDET_RX_MAX_INDEX 127
 #define I40E_VP_MDET_RX_VALID_SHIFT 0
@@ -3161,7 +3161,7 @@
 #define I40E_VF_ARQLEN1_ARQCRIT_SHIFT 30
 #define I40E_VF_ARQLEN1_ARQCRIT_MASK I40E_MASK(0x1, I40E_VF_ARQLEN1_ARQCRIT_SHIFT)
 #define I40E_VF_ARQLEN1_ARQENABLE_SHIFT 31
-#define I40E_VF_ARQLEN1_ARQENABLE_MASK I40E_MASK(0x1, I40E_VF_ARQLEN1_ARQENABLE_SHIFT)
+#define I40E_VF_ARQLEN1_ARQENABLE_MASK I40E_MASK(0x1u, I40E_VF_ARQLEN1_ARQENABLE_SHIFT)
 #define I40E_VF_ARQT1 0x00007000 /* Reset: EMPR */
 #define I40E_VF_ARQT1_ARQT_SHIFT 0
 #define I40E_VF_ARQT1_ARQT_MASK I40E_MASK(0x3FF, I40E_VF_ARQT1_ARQT_SHIFT)
@@ -3184,7 +3184,7 @@
 #define I40E_VF_ATQLEN1_ATQCRIT_SHIFT 30
 #define I40E_VF_ATQLEN1_ATQCRIT_MASK I40E_MASK(0x1, I40E_VF_ATQLEN1_ATQCRIT_SHIFT)
 #define I40E_VF_ATQLEN1_ATQENABLE_SHIFT 31
-#define I40E_VF_ATQLEN1_ATQENABLE_MASK I40E_MASK(0x1, I40E_VF_ATQLEN1_ATQENABLE_SHIFT)
+#define I40E_VF_ATQLEN1_ATQENABLE_MASK I40E_MASK(0x1u, I40E_VF_ATQLEN1_ATQENABLE_SHIFT)
 #define I40E_VF_ATQT1 0x00008400 /* Reset: EMPR */
 #define I40E_VF_ATQT1_ATQT_SHIFT 0
 #define I40E_VF_ATQT1_ATQT_MASK I40E_MASK(0x3FF, I40E_VF_ATQT1_ATQT_SHIFT)
-- 
2.21.0

[net-next 05/15] i40e: Add drop mode parameter to set mac config

[Jeff Kirsher]

From: Sylwia Wnuczko <sylwia.wnuczko@intel.com>

This patch adds "drop mode" parameter to set mac config AQ command.
This bit controls the behavior when a no-drop packet is blocking a TC
queue.
0 – The PF driver is notified.
1 – The blocking packet is dropped and then the PF driver is notified.

Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_adminq.c |  4 ++-
 .../net/ethernet/intel/i40e/i40e_adminq_cmd.h | 29 ++++++++++---------
 drivers/net/ethernet/intel/i40e/i40e_type.h   |  1 +
 3 files changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
index 814acbe79ffd..72c04881d290 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
@@ -610,8 +610,10 @@ i40e_status i40e_init_adminq(struct i40e_hw *hw)
 
 	if (hw->aq.api_maj_ver > 1 ||
 	    (hw->aq.api_maj_ver == 1 &&
-	     hw->aq.api_min_ver >= 8))
+	     hw->aq.api_min_ver >= 8)) {
 		hw->flags |= I40E_HW_FLAG_FW_LLDP_PERSISTENT;
+		hw->flags |= I40E_HW_FLAG_DROP_MODE;
+	}
 
 	if (hw->aq.api_maj_ver > I40E_FW_API_VERSION_MAJOR) {
 		ret_code = I40E_ERR_FIRMWARE_API_VERSION;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 6536023fa074..4d966d80305f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -2051,20 +2051,21 @@ I40E_CHECK_CMD_LENGTH(i40e_aq_set_phy_config);
 struct i40e_aq_set_mac_config {
 	__le16	max_frame_size;
 	u8	params;
-#define I40E_AQ_SET_MAC_CONFIG_CRC_EN		0x04
-#define I40E_AQ_SET_MAC_CONFIG_PACING_MASK	0x78
-#define I40E_AQ_SET_MAC_CONFIG_PACING_SHIFT	3
-#define I40E_AQ_SET_MAC_CONFIG_PACING_NONE	0x0
-#define I40E_AQ_SET_MAC_CONFIG_PACING_1B_13TX	0xF
-#define I40E_AQ_SET_MAC_CONFIG_PACING_1DW_9TX	0x9
-#define I40E_AQ_SET_MAC_CONFIG_PACING_1DW_4TX	0x8
-#define I40E_AQ_SET_MAC_CONFIG_PACING_3DW_7TX	0x7
-#define I40E_AQ_SET_MAC_CONFIG_PACING_2DW_3TX	0x6
-#define I40E_AQ_SET_MAC_CONFIG_PACING_1DW_1TX	0x5
-#define I40E_AQ_SET_MAC_CONFIG_PACING_3DW_2TX	0x4
-#define I40E_AQ_SET_MAC_CONFIG_PACING_7DW_3TX	0x3
-#define I40E_AQ_SET_MAC_CONFIG_PACING_4DW_1TX	0x2
-#define I40E_AQ_SET_MAC_CONFIG_PACING_9DW_1TX	0x1
+#define I40E_AQ_SET_MAC_CONFIG_CRC_EN			0x04
+#define I40E_AQ_SET_MAC_CONFIG_PACING_MASK		0x78
+#define I40E_AQ_SET_MAC_CONFIG_PACING_SHIFT		3
+#define I40E_AQ_SET_MAC_CONFIG_PACING_NONE		0x0
+#define I40E_AQ_SET_MAC_CONFIG_PACING_1B_13TX		0xF
+#define I40E_AQ_SET_MAC_CONFIG_PACING_1DW_9TX		0x9
+#define I40E_AQ_SET_MAC_CONFIG_PACING_1DW_4TX		0x8
+#define I40E_AQ_SET_MAC_CONFIG_PACING_3DW_7TX		0x7
+#define I40E_AQ_SET_MAC_CONFIG_PACING_2DW_3TX		0x6
+#define I40E_AQ_SET_MAC_CONFIG_PACING_1DW_1TX		0x5
+#define I40E_AQ_SET_MAC_CONFIG_PACING_3DW_2TX		0x4
+#define I40E_AQ_SET_MAC_CONFIG_PACING_7DW_3TX		0x3
+#define I40E_AQ_SET_MAC_CONFIG_PACING_4DW_1TX		0x2
+#define I40E_AQ_SET_MAC_CONFIG_PACING_9DW_1TX		0x1
+#define I40E_AQ_SET_MAC_CONFIG_DROP_BLOCKING_PACKET_EN	0x80
 	u8	tx_timer_priority; /* bitmap */
 	__le16	tx_timer_value;
 	__le16	fc_refresh_threshold;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 2a6219d66771..7c1d57683b53 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -624,6 +624,7 @@ struct i40e_hw {
 #define I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK BIT_ULL(3)
 #define I40E_HW_FLAG_FW_LLDP_STOPPABLE      BIT_ULL(4)
 #define I40E_HW_FLAG_FW_LLDP_PERSISTENT     BIT_ULL(5)
+#define I40E_HW_FLAG_DROP_MODE              BIT_ULL(7)
 	u64 flags;
 
 	/* Used in set switch config AQ command */
-- 
2.21.0

[net-next 06/15] i40e: check_recovery_mode had wrong if statement

[Jeff Kirsher]

From: Adrian Podlawski <adrian.podlawski@intel.com>

Function check_recovery_mode had wrong if statement.
Now we check proper FWS1B register values, which are responsible for
the recovery mode. Recovery mode has 4 values for x710 and 2 for x722.
That's why we need 6 different flags which are defined in the code.
Now in the if statement, we recognize type of mac address
and register value.
Without those changes driver could show wrong state.

Signed-off-by: Adrian Podlawski <adrian.podlawski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 17 ++++++++++++++---
 drivers/net/ethernet/intel/i40e/i40e_register.h |  6 ++++++
 2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index b807dd6b1417..4551d97771c9 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14578,9 +14578,20 @@ void i40e_set_fec_in_flags(u8 fec_cfg, u32 *flags)
  **/
 static bool i40e_check_recovery_mode(struct i40e_pf *pf)
 {
-	u32 val = rd32(&pf->hw, I40E_GL_FWSTS);
-
-	if (val & I40E_GL_FWSTS_FWS1B_MASK) {
+	u32 val = rd32(&pf->hw, I40E_GL_FWSTS) & I40E_GL_FWSTS_FWS1B_MASK;
+	bool is_recovery_mode = false;
+
+	if (pf->hw.mac.type == I40E_MAC_XL710)
+		is_recovery_mode =
+		val == I40E_XL710_GL_FWSTS_FWS1B_REC_MOD_CORER_MASK ||
+		val == I40E_XL710_GL_FWSTS_FWS1B_REC_MOD_GLOBR_MASK ||
+		val == I40E_XL710_GL_FWSTS_FWS1B_REC_MOD_TRANSITION_MASK ||
+		val == I40E_XL710_GL_FWSTS_FWS1B_REC_MOD_NVM_MASK;
+	if (pf->hw.mac.type == I40E_MAC_X722)
+		is_recovery_mode =
+		val == I40E_X722_GL_FWSTS_FWS1B_REC_MOD_CORER_MASK ||
+		val == I40E_X722_GL_FWSTS_FWS1B_REC_MOD_GLOBR_MASK;
+	if (is_recovery_mode) {
 		dev_notice(&pf->pdev->dev, "Firmware recovery mode detected. Limiting functionality.\n");
 		dev_notice(&pf->pdev->dev, "Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode.\n");
 		set_bit(__I40E_RECOVERY_MODE, pf->state);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h
index 330ac19a5dae..d35d690ca10f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_register.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_register.h
@@ -363,6 +363,12 @@
 #define I40E_GL_FWSTS_FWRI_MASK I40E_MASK(0x1, I40E_GL_FWSTS_FWRI_SHIFT)
 #define I40E_GL_FWSTS_FWS1B_SHIFT 16
 #define I40E_GL_FWSTS_FWS1B_MASK I40E_MASK(0xFF, I40E_GL_FWSTS_FWS1B_SHIFT)
+#define I40E_XL710_GL_FWSTS_FWS1B_REC_MOD_CORER_MASK I40E_MASK(0x30, I40E_GL_FWSTS_FWS1B_SHIFT)
+#define I40E_XL710_GL_FWSTS_FWS1B_REC_MOD_GLOBR_MASK I40E_MASK(0x31, I40E_GL_FWSTS_FWS1B_SHIFT)
+#define I40E_XL710_GL_FWSTS_FWS1B_REC_MOD_TRANSITION_MASK I40E_MASK(0x32, I40E_GL_FWSTS_FWS1B_SHIFT)
+#define I40E_XL710_GL_FWSTS_FWS1B_REC_MOD_NVM_MASK I40E_MASK(0x33, I40E_GL_FWSTS_FWS1B_SHIFT)
+#define I40E_X722_GL_FWSTS_FWS1B_REC_MOD_CORER_MASK I40E_MASK(0xB, I40E_GL_FWSTS_FWS1B_SHIFT)
+#define I40E_X722_GL_FWSTS_FWS1B_REC_MOD_GLOBR_MASK I40E_MASK(0xC, I40E_GL_FWSTS_FWS1B_SHIFT)
 #define I40E_GLGEN_CLKSTAT 0x000B8184 /* Reset: POR */
 #define I40E_GLGEN_CLKSTAT_CLKMODE_SHIFT 0
 #define I40E_GLGEN_CLKSTAT_CLKMODE_MASK I40E_MASK(0x1, I40E_GLGEN_CLKSTAT_CLKMODE_SHIFT)
-- 
2.21.0

[net-next 07/15] i40e: Update x710 FW API version to 1.9

[Jeff Kirsher]

From: Piotr Azarewicz <piotr.azarewicz@intel.com>

Upcoming x710 FW increment API version to 1.9 due to Extend PHY access AQ
command support. SW is ready for that support as well.

Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 4d966d80305f..360f0cb83b2d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -12,7 +12,7 @@
 
 #define I40E_FW_API_VERSION_MAJOR	0x0001
 #define I40E_FW_API_VERSION_MINOR_X722	0x0008
-#define I40E_FW_API_VERSION_MINOR_X710	0x0008
+#define I40E_FW_API_VERSION_MINOR_X710	0x0009
 
 #define I40E_FW_MINOR_VERSION(_h) ((_h)->mac.type == I40E_MAC_XL710 ? \
 					I40E_FW_API_VERSION_MINOR_X710 : \
-- 
2.21.0

[net-next 08/15] i40e: reset veb.tc_stats when resetting veb.stats

[Jeff Kirsher]

From: Jacob Keller <jacob.e.keller@intel.com>

The stats structure for the VEB switch statistics is reset periodically,
but the tc_stats are not reset at the same time.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 4551d97771c9..5c280c025085 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -534,6 +534,10 @@ void i40e_pf_reset_stats(struct i40e_pf *pf)
 			       sizeof(pf->veb[i]->stats));
 			memset(&pf->veb[i]->stats_offsets, 0,
 			       sizeof(pf->veb[i]->stats_offsets));
+			memset(&pf->veb[i]->tc_stats, 0,
+			       sizeof(pf->veb[i]->tc_stats));
+			memset(&pf->veb[i]->tc_stats_offsets, 0,
+			       sizeof(pf->veb[i]->tc_stats_offsets));
 			pf->veb[i]->stat_offsets_loaded = false;
 		}
 	}
-- 
2.21.0

[net-next 09/15] i40e: Update x722 FW API version to 1.9

[Jeff Kirsher]

From: Piotr Azarewicz <piotr.azarewicz@intel.com>

Upcoming x722 FW increment API version to 1.9, so we must bump up version
number as well.
x722 will support PHY access AQ command as x710 does.

Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 360f0cb83b2d..21cccec328e3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -11,7 +11,7 @@
  */
 
 #define I40E_FW_API_VERSION_MAJOR	0x0001
-#define I40E_FW_API_VERSION_MINOR_X722	0x0008
+#define I40E_FW_API_VERSION_MINOR_X722	0x0009
 #define I40E_FW_API_VERSION_MINOR_X710	0x0009
 
 #define I40E_FW_MINOR_VERSION(_h) ((_h)->mac.type == I40E_MAC_XL710 ? \
-- 
2.21.0

[net-next 10/15] i40e: Fix crash caused by stress setting of VF MAC addresses

[Jeff Kirsher]

From: Slawomir Laba <slawomirx.laba@intel.com>

Add update to the VSI pointer passed to the i40e_set_vf_mac function.
If VF is in reset state the driver waits in i40e_set_vf_mac function
for the reset to be complete, yet after reset the vsi pointer
that was passed into this function is no longer valid.

The patch updates local VSI pointer directly from pf->vsi array,
by using the id stored in VF pointer (lan_vsi_idx).

Without this commit the driver might occasionally invoke general
protection fault in kernel and disable the OS entirely.

Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 4601f9e4e998..f8aa4deceb5e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -3967,10 +3967,15 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 	/* When the VF is resetting wait until it is done.
 	 * It can take up to 200 milliseconds,
 	 * but wait for up to 300 milliseconds to be safe.
+	 * If the VF is indeed in reset, the vsi pointer has
+	 * to show on the newly loaded vsi under pf->vsi[id].
 	 */
 	for (i = 0; i < 15; i++) {
-		if (test_bit(I40E_VF_STATE_INIT, &vf->vf_states))
+		if (test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) {
+			if (i > 0)
+				vsi = pf->vsi[vf->lan_vsi_idx];
 			break;
+		}
 		msleep(20);
 	}
 	if (!test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) {
-- 
2.21.0

[net-next 11/15] i40e: Remove function i40e_update_dcb_config()

[Jeff Kirsher]

From: Grzegorz Siwik <grzegorz.siwik@intel.com>

This patch removes function i40e_update_dcb_config(). Instead of
i40e_update_dcb_config() we use i40e_init_dcb(), which implements the
correct NVM read.

Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 46 +--------------------
 1 file changed, 1 insertion(+), 45 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 5c280c025085..8d6b9515b595 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6419,50 +6419,6 @@ static int i40e_resume_port_tx(struct i40e_pf *pf)
 	return ret;
 }
 
-/**
- * i40e_update_dcb_config
- * @hw: pointer to the HW struct
- * @enable_mib_change: enable MIB change event
- *
- * Update DCB configuration from the firmware
- **/
-static enum i40e_status_code
-i40e_update_dcb_config(struct i40e_hw *hw, bool enable_mib_change)
-{
-	struct i40e_lldp_variables lldp_cfg;
-	i40e_status ret;
-
-	if (!hw->func_caps.dcb)
-		return I40E_NOT_SUPPORTED;
-
-	/* Read LLDP NVM area */
-	ret = i40e_read_lldp_cfg(hw, &lldp_cfg);
-	if (ret)
-		return I40E_ERR_NOT_READY;
-
-	/* Get DCBX status */
-	ret = i40e_get_dcbx_status(hw, &hw->dcbx_status);
-	if (ret)
-		return ret;
-
-	/* Check the DCBX Status */
-	if (hw->dcbx_status == I40E_DCBX_STATUS_DONE ||
-	    hw->dcbx_status == I40E_DCBX_STATUS_IN_PROGRESS) {
-		/* Get current DCBX configuration */
-		ret = i40e_get_dcb_config(hw);
-		if (ret)
-			return ret;
-	} else if (hw->dcbx_status == I40E_DCBX_STATUS_DISABLED) {
-		return I40E_ERR_NOT_READY;
-	}
-
-	/* Configure the LLDP MIB change event */
-	if (enable_mib_change)
-		ret = i40e_aq_cfg_lldp_mib_change_event(hw, true, NULL);
-
-	return ret;
-}
-
 /**
  * i40e_init_pf_dcb - Initialize DCB configuration
  * @pf: PF being configured
@@ -6485,7 +6441,7 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf)
 		goto out;
 	}
 
-	err = i40e_update_dcb_config(hw, true);
+	err = i40e_init_dcb(hw, true);
 	if (!err) {
 		/* Device/Function is not DCBX capable */
 		if ((!hw->func_caps.dcb) ||
-- 
2.21.0

[net-next 12/15] i40e: make i40e_set_mac_type() public

[Jeff Kirsher]

From: Piotr Kwapulinski <piotr.kwapulinski@intel.com>

Make i40e_set_mac_type() public. i40e driver requires i40e_set_mac_type()
to be public. It is required for recovery mode handling. Without this patch
recovery mode could not be detected in i40e_probe().

Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c    | 2 +-
 drivers/net/ethernet/intel/i40e/i40e_prototype.h | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 7af1b7477140..de996a80013e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -13,7 +13,7 @@
  * This function sets the mac type of the adapter based on the
  * vendor ID and device ID stored in the hw structure.
  **/
-static i40e_status i40e_set_mac_type(struct i40e_hw *hw)
+i40e_status i40e_set_mac_type(struct i40e_hw *hw)
 {
 	i40e_status status = 0;
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index eac88bcc6c06..9c810d54df1c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -326,6 +326,8 @@ void i40e_nvmupd_check_wait_event(struct i40e_hw *hw, u16 opcode,
 void i40e_nvmupd_clear_wait_state(struct i40e_hw *hw);
 void i40e_set_pci_config_data(struct i40e_hw *hw, u16 link_status);
 
+i40e_status i40e_set_mac_type(struct i40e_hw *hw);
+
 extern struct i40e_rx_ptype_decoded i40e_ptype_lookup[];
 
 static inline struct i40e_rx_ptype_decoded decode_rx_desc_ptype(u8 ptype)
-- 
2.21.0

[net-next 13/15] i40e: allow reset in recovery mode

[Jeff Kirsher]

From: Piotr Kwapulinski <piotr.kwapulinski@intel.com>

Driver waits after issuing a reset. When a reset takes too long a driver
gives up. Implemented by invoking PF reset in a loop. After defined
number of unsuccessful PF reset trials it returns error.
Without this patch PF reset fails when NIC is in recovery mode.

Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 67 ++++++++++++++++++---
 1 file changed, 60 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 8d6b9515b595..fdf43d87e983 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14564,6 +14564,51 @@ static bool i40e_check_recovery_mode(struct i40e_pf *pf)
 	return false;
 }
 
+/**
+ * i40e_pf_loop_reset - perform reset in a loop.
+ * @pf: board private structure
+ *
+ * This function is useful when a NIC is about to enter recovery mode.
+ * When a NIC's internal data structures are corrupted the NIC's
+ * firmware is going to enter recovery mode.
+ * Right after a POR it takes about 7 minutes for firmware to enter
+ * recovery mode. Until that time a NIC is in some kind of intermediate
+ * state. After that time period the NIC almost surely enters
+ * recovery mode. The only way for a driver to detect intermediate
+ * state is to issue a series of pf-resets and check a return value.
+ * If a PF reset returns success then the firmware could be in recovery
+ * mode so the caller of this code needs to check for recovery mode
+ * if this function returns success. There is a little chance that
+ * firmware will hang in intermediate state forever.
+ * Since waiting 7 minutes is quite a lot of time this function waits
+ * 10 seconds and then gives up by returning an error.
+ *
+ * Return 0 on success, negative on failure.
+ **/
+static i40e_status i40e_pf_loop_reset(struct i40e_pf *pf)
+{
+	const unsigned short MAX_CNT = 1000;
+	const unsigned short MSECS = 10;
+	struct i40e_hw *hw = &pf->hw;
+	i40e_status ret;
+	int cnt;
+
+	for (cnt = 0; cnt < MAX_CNT; ++cnt) {
+		ret = i40e_pf_reset(hw);
+		if (!ret)
+			break;
+		msleep(MSECS);
+	}
+
+	if (cnt == MAX_CNT) {
+		dev_info(&pf->pdev->dev, "PF reset failed: %d\n", ret);
+		return ret;
+	}
+
+	pf->pfr_count++;
+	return ret;
+}
+
 /**
  * i40e_init_recovery_mode - initialize subsystems needed in recovery mode
  * @pf: board private structure
@@ -14792,14 +14837,22 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Reset here to make sure all is clean and to define PF 'n' */
 	i40e_clear_hw(hw);
-	if (!i40e_check_recovery_mode(pf)) {
-		err = i40e_pf_reset(hw);
-		if (err) {
-			dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err);
-			goto err_pf_reset;
-		}
-		pf->pfr_count++;
+
+	err = i40e_set_mac_type(hw);
+	if (err) {
+		dev_warn(&pdev->dev, "unidentified MAC or BLANK NVM: %d\n",
+			 err);
+		goto err_pf_reset;
 	}
+
+	err = i40e_pf_loop_reset(pf);
+	if (err) {
+		dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err);
+		goto err_pf_reset;
+	}
+
+	i40e_check_recovery_mode(pf);
+
 	hw->aq.num_arq_entries = I40E_AQ_LEN;
 	hw->aq.num_asq_entries = I40E_AQ_LEN;
 	hw->aq.arq_buf_size = I40E_MAX_AQ_BUF_SIZE;
-- 
2.21.0

[net-next 14/15] i40e: Persistent LLDP support

[Jeff Kirsher]

From: Sylwia Wnuczko <sylwia.wnuczko@intel.com>

This patch adds a function to read NVM module data and uses it to
read current LLDP agent configuration from NVM API version 1.8.

Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_dcb.c    |  18 +++-
 drivers/net/ethernet/intel/i40e/i40e_dcb.h    |   2 +
 drivers/net/ethernet/intel/i40e/i40e_nvm.c    | 101 ++++++++++++++++++
 .../net/ethernet/intel/i40e/i40e_prototype.h  |   6 ++
 drivers/net/ethernet/intel/i40e/i40e_type.h   |   1 +
 5 files changed, 127 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb.c b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
index 292eeb3def10..200a1cb3b536 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_dcb.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
@@ -877,7 +877,23 @@ i40e_status i40e_init_dcb(struct i40e_hw *hw, bool enable_mib_change)
 		return I40E_NOT_SUPPORTED;
 
 	/* Read LLDP NVM area */
-	ret = i40e_read_lldp_cfg(hw, &lldp_cfg);
+	if (hw->flags & I40E_HW_FLAG_FW_LLDP_PERSISTENT) {
+		u8 offset = 0;
+
+		if (hw->mac.type == I40E_MAC_XL710)
+			offset = I40E_LLDP_CURRENT_STATUS_XL710_OFFSET;
+		else if (hw->mac.type == I40E_MAC_X722)
+			offset = I40E_LLDP_CURRENT_STATUS_X722_OFFSET;
+		else
+			return I40E_NOT_SUPPORTED;
+
+		ret = i40e_read_nvm_module_data(hw,
+						I40E_SR_EMP_SR_SETTINGS_PTR,
+						offset, 1,
+						&lldp_cfg.adminstatus);
+	} else {
+		ret = i40e_read_lldp_cfg(hw, &lldp_cfg);
+	}
 	if (ret)
 		return I40E_ERR_NOT_READY;
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb.h b/drivers/net/ethernet/intel/i40e/i40e_dcb.h
index ddb48ae7cce4..2a80c5daa376 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_dcb.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_dcb.h
@@ -30,6 +30,8 @@
 #define I40E_CEE_SUBTYPE_APP_PRI	4
 
 #define I40E_CEE_MAX_FEAT_TYPE		3
+#define I40E_LLDP_CURRENT_STATUS_XL710_OFFSET	0x2B
+#define I40E_LLDP_CURRENT_STATUS_X722_OFFSET	0x31
 /* Defines for LLDP TLV header */
 #define I40E_LLDP_TLV_LEN_SHIFT		0
 #define I40E_LLDP_TLV_LEN_MASK		(0x01FF << I40E_LLDP_TLV_LEN_SHIFT)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_nvm.c b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
index c508b75c3c09..e4d8d20baf3b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_nvm.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
@@ -321,6 +321,77 @@ i40e_status i40e_read_nvm_word(struct i40e_hw *hw, u16 offset,
 	return ret_code;
 }
 
+/**
+ * i40e_read_nvm_module_data - Reads NVM Buffer to specified memory location
+ * @hw: pointer to the HW structure
+ * @module_ptr: Pointer to module in words with respect to NVM beginning
+ * @offset: offset in words from module start
+ * @words_data_size: Words to read from NVM
+ * @data_ptr: Pointer to memory location where resulting buffer will be stored
+ **/
+i40e_status i40e_read_nvm_module_data(struct i40e_hw *hw,
+				      u8 module_ptr, u16 offset,
+				      u16 words_data_size,
+				      u16 *data_ptr)
+{
+	i40e_status status;
+	u16 ptr_value = 0;
+	u32 flat_offset;
+
+	if (module_ptr != 0) {
+		status = i40e_read_nvm_word(hw, module_ptr, &ptr_value);
+		if (status) {
+			i40e_debug(hw, I40E_DEBUG_ALL,
+				   "Reading nvm word failed.Error code: %d.\n",
+				   status);
+			return I40E_ERR_NVM;
+		}
+	}
+#define I40E_NVM_INVALID_PTR_VAL 0x7FFF
+#define I40E_NVM_INVALID_VAL 0xFFFF
+
+	/* Pointer not initialized */
+	if (ptr_value == I40E_NVM_INVALID_PTR_VAL ||
+	    ptr_value == I40E_NVM_INVALID_VAL)
+		return I40E_ERR_BAD_PTR;
+
+	/* Check whether the module is in SR mapped area or outside */
+	if (ptr_value & I40E_PTR_TYPE) {
+		/* Pointer points outside of the Shared RAM mapped area */
+		ptr_value &= ~I40E_PTR_TYPE;
+
+		/* PtrValue in 4kB units, need to convert to words */
+		ptr_value /= 2;
+		flat_offset = ((u32)ptr_value * 0x1000) + (u32)offset;
+		status = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
+		if (!status) {
+			status = i40e_aq_read_nvm(hw, 0, 2 * flat_offset,
+						  2 * words_data_size,
+						  data_ptr, true, NULL);
+			i40e_release_nvm(hw);
+			if (status) {
+				i40e_debug(hw, I40E_DEBUG_ALL,
+					   "Reading nvm aq failed.Error code: %d.\n",
+					   status);
+				return I40E_ERR_NVM;
+			}
+		} else {
+			return I40E_ERR_NVM;
+		}
+	} else {
+		/* Read from the Shadow RAM */
+		status = i40e_read_nvm_buffer(hw, ptr_value + offset,
+					      &words_data_size, data_ptr);
+		if (status) {
+			i40e_debug(hw, I40E_DEBUG_ALL,
+				   "Reading nvm buffer failed.Error code: %d.\n",
+				   status);
+		}
+	}
+
+	return status;
+}
+
 /**
  * i40e_read_nvm_buffer_srctl - Reads Shadow RAM buffer via SRCTL register
  * @hw: pointer to the HW structure
@@ -429,6 +500,36 @@ static i40e_status __i40e_read_nvm_buffer(struct i40e_hw *hw,
 	return i40e_read_nvm_buffer_srctl(hw, offset, words, data);
 }
 
+/**
+ * i40e_read_nvm_buffer - Reads Shadow RAM buffer and acquire lock if necessary
+ * @hw: pointer to the HW structure
+ * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF).
+ * @words: (in) number of words to read; (out) number of words actually read
+ * @data: words read from the Shadow RAM
+ *
+ * Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_srrd()
+ * method. The buffer read is preceded by the NVM ownership take
+ * and followed by the release.
+ **/
+i40e_status i40e_read_nvm_buffer(struct i40e_hw *hw, u16 offset,
+				 u16 *words, u16 *data)
+{
+	i40e_status ret_code = 0;
+
+	if (hw->flags & I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE) {
+		ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
+		if (!ret_code) {
+			ret_code = i40e_read_nvm_buffer_aq(hw, offset, words,
+							   data);
+			i40e_release_nvm(hw);
+		}
+	} else {
+		ret_code = i40e_read_nvm_buffer_srctl(hw, offset, words, data);
+	}
+
+	return ret_code;
+}
+
 /**
  * i40e_write_nvm_aq - Writes Shadow RAM.
  * @hw: pointer to the HW structure.
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index 9c810d54df1c..5250441bf75b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -315,6 +315,12 @@ i40e_status i40e_acquire_nvm(struct i40e_hw *hw,
 void i40e_release_nvm(struct i40e_hw *hw);
 i40e_status i40e_read_nvm_word(struct i40e_hw *hw, u16 offset,
 					 u16 *data);
+i40e_status i40e_read_nvm_module_data(struct i40e_hw *hw,
+				      u8 module_ptr, u16 offset,
+				      u16 words_data_size,
+				      u16 *data_ptr);
+i40e_status i40e_read_nvm_buffer(struct i40e_hw *hw, u16 offset,
+				 u16 *words, u16 *data);
 i40e_status i40e_update_nvm_checksum(struct i40e_hw *hw);
 i40e_status i40e_validate_nvm_checksum(struct i40e_hw *hw,
 						 u16 *checksum);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 7c1d57683b53..b43ec94a0f29 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -1318,6 +1318,7 @@ struct i40e_hw_port_stats {
 #define I40E_SR_VPD_PTR				0x2F
 #define I40E_SR_PCIE_ALT_AUTO_LOAD_PTR		0x3E
 #define I40E_SR_SW_CHECKSUM_WORD		0x3F
+#define I40E_SR_EMP_SR_SETTINGS_PTR		0x48
 
 /* Auxiliary field, mask and shift definition for Shadow RAM and NVM Flash */
 #define I40E_SR_VPD_MODULE_MAX_SIZE		1024
-- 
2.21.0

[net-next 15/15] i40e: fix retrying in i40e_aq_get_phy_capabilities

[Jeff Kirsher]

From: Marcin Formela <marcin.formela@intel.com>

Fixed a bug where driver was breaking out of the loop and
reporting an error without retrying first.

Signed-off-by: Marcin Formela <marcin.formela@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index de996a80013e..46e649c09f72 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1577,19 +1577,22 @@ i40e_status i40e_aq_get_phy_capabilities(struct i40e_hw *hw,
 		status = i40e_asq_send_command(hw, &desc, abilities,
 					       abilities_size, cmd_details);
 
-		if (status)
-			break;
-
-		if (hw->aq.asq_last_status == I40E_AQ_RC_EIO) {
+		switch (hw->aq.asq_last_status) {
+		case I40E_AQ_RC_EIO:
 			status = I40E_ERR_UNKNOWN_PHY;
 			break;
-		} else if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN) {
+		case I40E_AQ_RC_EAGAIN:
 			usleep_range(1000, 2000);
 			total_delay++;
 			status = I40E_ERR_TIMEOUT;
+			break;
+		/* also covers I40E_AQ_RC_OK */
+		default:
+			break;
 		}
-	} while ((hw->aq.asq_last_status != I40E_AQ_RC_OK) &&
-		 (total_delay < max_delay));
+
+	} while ((hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN) &&
+		(total_delay < max_delay));
 
 	if (status)
 		return status;
-- 
2.21.0

Re: [net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2019-08-21

[Jakub Kicinski]

On Wed, 21 Aug 2019 13:16:08 -0700, Jeff Kirsher wrote:
> This series contains updates to i40e driver only.

Patch 12 should really be squashed into 13, 7 and 9 could also be
combined. But not a big deal, I guess.

Re: [net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2019-08-21

[David Miller]

From: Jakub Kicinski <jakub.kicinski@netronome.com>
Date: Wed, 21 Aug 2019 14:31:06 -0700

> On Wed, 21 Aug 2019 13:16:08 -0700, Jeff Kirsher wrote:
>> This series contains updates to i40e driver only.
> 
> Patch 12 should really be squashed into 13, 7 and 9 could also be
> combined. But not a big deal, I guess.

Agreed, publicizing a function is not a discreet change within the
same module.  Whereas doing so in order to facilitate a new external
user as part of another change, on the other hand, is.