Netdev Archive on lore.kernel.org
 help / color / Atom feed
From: "René van Dorst" <opensource@vdorst.com>
To: Frank Wunderlich <frank-w@public-files.de>
Cc: John Crispin <john@phrozen.org>,
	Sean Wang <sean.wang@mediatek.com>,
	Nelson Chang <nelson.chang@mediatek.com>,
	"David S . Miller" <davem@davemloft.net>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org,
	Russell King <linux@armlinux.org.uk>, Stefan Roese <sr@denx.de>
Subject: Re: Aw: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK
Date: Sat, 24 Aug 2019 07:41:03 +0000
Message-ID: <20190824074103.Horde.ytG2fquC9xJKq5TL79l6J0M@www.vdorst.com> (raw)
In-Reply-To: <trinity-df75d11a-c27f-4941-a880-b017ebabd3dc-1566583013438@3c-app-gmx-bs75>

Hi Frank,

Quoting Frank Wunderlich <frank-w@public-files.de>:

> tested on bpi-r2 (mt7623/mt7530) and bpi-r64 (mt7622/rtl8367)
>

Thanks for testing!

> as reported to rene directly rx-path needs some rework because  
> current rx-speed
> on bpi-r2 is 865 Mbits/sec instead of ~940 Mbits/sec

I still think it is a result of the extra code in the rx path when mt76x8
was introduced.

Greats,

René

>
> Tested-by: Frank Wunderlich <frank-w@public-files.de>
>
> regards Frank
>
>
>> Gesendet: Freitag, 23. August 2019 um 15:45 Uhr
>> Von: "René van Dorst" <opensource@vdorst.com>
>> An: "John Crispin" <john@phrozen.org>, "Sean Wang"  
>> <sean.wang@mediatek.com>, "Nelson Chang"  
>> <nelson.chang@mediatek.com>, "David S . Miller"  
>> <davem@davemloft.net>, "Matthias Brugger" <matthias.bgg@gmail.com>
>> Cc: netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,  
>> linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org,  
>> "Russell King" <linux@armlinux.org.uk>, "Frank Wunderlich"  
>> <frank-w@public-files.de>, "Stefan Roese" <sr@denx.de>, "René van  
>> Dorst" <opensource@vdorst.com>
>> Betreff: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK
>>
>> These patches converts mediatek driver to PHYLINK API.
>>
>> v2->v3:
>> * Phylink improvements and clean-ups after review
>> v1->v2:
>> * Rebase for mt76x8 changes
>> * Phylink improvements and clean-ups after review
>> * SGMII port doesn't support 2.5Gbit in SGMII mode only in BASE-X mode.
>>   Refactor the code.
>>
>> René van Dorst (3):
>>   net: ethernet: mediatek: Add basic PHYLINK support
>>   net: ethernet: mediatek: Re-add support SGMII
>>   dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the
>>     new phylink API
>>
>>  .../arm/mediatek/mediatek,sgmiisys.txt        |   2 -
>>  .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  |  28 +-
>>  arch/arm64/boot/dts/mediatek/mt7622.dtsi      |   1 -
>>  drivers/net/ethernet/mediatek/Kconfig         |   2 +-
>>  drivers/net/ethernet/mediatek/mtk_eth_path.c  |  75 +--
>>  drivers/net/ethernet/mediatek/mtk_eth_soc.c   | 529 ++++++++++++------
>>  drivers/net/ethernet/mediatek/mtk_eth_soc.h   |  68 ++-
>>  drivers/net/ethernet/mediatek/mtk_sgmii.c     |  65 ++-
>>  8 files changed, 477 insertions(+), 293 deletions(-)
>>
>> --
>> 2.20.1
>>
>>




      reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23 13:45 René van Dorst
2019-08-23 13:45 ` [PATCH net-next v3 1/3] net: ethernet: mediatek: Add basic PHYLINK support René van Dorst
2019-08-24  9:11   ` Russell King - ARM Linux admin
2019-08-24 12:33     ` René van Dorst
2019-08-23 13:45 ` [PATCH net-next v3 2/3] net: ethernet: mediatek: Re-add support SGMII René van Dorst
2019-08-24  9:21   ` Russell King - ARM Linux admin
2019-08-24 13:11     ` René van Dorst
2019-08-24 13:32       ` Russell King - ARM Linux admin
2019-08-25 11:41         ` René van Dorst
2019-08-23 13:45 ` [PATCH net-next v3 3/3] dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the new phylink API René van Dorst
2019-08-23 17:56 ` Aw: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK Frank Wunderlich
2019-08-24  7:41   ` René van Dorst [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190824074103.Horde.ytG2fquC9xJKq5TL79l6J0M@www.vdorst.com \
    --to=opensource@vdorst.com \
    --cc=davem@davemloft.net \
    --cc=frank-w@public-files.de \
    --cc=john@phrozen.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=nelson.chang@mediatek.com \
    --cc=netdev@vger.kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=sr@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Netdev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netdev/0 netdev/git/0.git
	git clone --mirror https://lore.kernel.org/netdev/1 netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ https://lore.kernel.org/netdev \
		netdev@vger.kernel.org
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netdev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git