From: Saeed Mahameed <saeedm@mellanox.com>
To: Saeed Mahameed <saeedm@mellanox.com>,
Leon Romanovsky <leonro@mellanox.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-rdma@vger.kernel.org" <linux-rdma@vger.kernel.org>,
Parav Pandit <parav@mellanox.com>
Subject: [PATCH mlx5-next 11/18] net/mlx5: E-switch, Legacy introduce and use per vport acl tables APIs
Date: Mon, 28 Oct 2019 23:35:17 +0000 [thread overview]
Message-ID: <20191028233440.5564-12-saeedm@mellanox.com> (raw)
In-Reply-To: <20191028233440.5564-1-saeedm@mellanox.com>
From: Parav Pandit <parav@mellanox.com>
Introduce and use per vport ACL tables creation and destroy APIs, so that
subsequently patch can use them during enabling/disabling a vport in
unified way for legacy vs offloads mode.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
.../net/ethernet/mellanox/mlx5/core/eswitch.c | 73 +++++++++++++++----
1 file changed, 60 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 0bdaef508e74..47555e272dda 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1663,12 +1663,6 @@ static void esw_apply_vport_conf(struct mlx5_eswitch *esw,
SET_VLAN_STRIP | SET_VLAN_INSERT : 0;
modify_esw_vport_cvlan(esw->dev, vport_num, vport->info.vlan, vport->info.qos,
flags);
-
- /* Only legacy mode needs ACLs */
- if (esw->mode == MLX5_ESWITCH_LEGACY) {
- esw_vport_ingress_config(esw, vport);
- esw_vport_egress_config(esw, vport);
- }
}
static void esw_legacy_vport_create_drop_counters(struct mlx5_vport *vport)
@@ -1706,10 +1700,59 @@ static void esw_legacy_vport_destroy_drop_counters(struct mlx5_vport *vport)
mlx5_fc_destroy(dev, vport->egress.legacy.drop_counter);
}
+static int esw_vport_create_legacy_acl_tables(struct mlx5_eswitch *esw,
+ struct mlx5_vport *vport)
+{
+ int ret;
+
+ /* Only non manager vports need ACL in legacy mode */
+ if (mlx5_esw_is_manager_vport(esw, vport->vport))
+ return 0;
+
+ ret = esw_vport_ingress_config(esw, vport);
+ if (ret)
+ return ret;
+
+ ret = esw_vport_egress_config(esw, vport);
+ if (ret)
+ esw_vport_disable_ingress_acl(esw, vport);
+
+ return ret;
+}
+
+static int esw_vport_setup_acl(struct mlx5_eswitch *esw,
+ struct mlx5_vport *vport)
+{
+ if (esw->mode == MLX5_ESWITCH_LEGACY)
+ return esw_vport_create_legacy_acl_tables(esw, vport);
+
+ return 0;
+}
+
+static void esw_vport_destroy_legacy_acl_tables(struct mlx5_eswitch *esw,
+ struct mlx5_vport *vport)
+
+{
+ if (mlx5_esw_is_manager_vport(esw, vport->vport))
+ return;
+
+ esw_vport_disable_egress_acl(esw, vport);
+ esw_vport_disable_ingress_acl(esw, vport);
+ esw_legacy_vport_destroy_drop_counters(vport);
+}
+
+static void esw_vport_cleanup_acl(struct mlx5_eswitch *esw,
+ struct mlx5_vport *vport)
+{
+ if (esw->mode == MLX5_ESWITCH_LEGACY)
+ esw_vport_destroy_legacy_acl_tables(esw, vport);
+}
+
static int esw_enable_vport(struct mlx5_eswitch *esw, struct mlx5_vport *vport,
enum mlx5_eswitch_vport_event enabled_events)
{
u16 vport_num = vport->vport;
+ int ret;
mutex_lock(&esw->state_lock);
WARN_ON(vport->enabled);
@@ -1724,6 +1767,10 @@ static int esw_enable_vport(struct mlx5_eswitch *esw, struct mlx5_vport *vport,
/* Restore old vport configuration */
esw_apply_vport_conf(esw, vport);
+ ret = esw_vport_setup_acl(esw, vport);
+ if (ret)
+ goto done;
+
/* Attach vport to the eswitch rate limiter */
if (esw_vport_enable_qos(esw, vport, vport->info.max_rate,
vport->qos.bw_share))
@@ -1744,8 +1791,9 @@ static int esw_enable_vport(struct mlx5_eswitch *esw, struct mlx5_vport *vport,
esw->enabled_vports++;
esw_debug(esw->dev, "Enabled VPORT(%d)\n", vport_num);
+done:
mutex_unlock(&esw->state_lock);
- return 0;
+ return ret;
}
static void esw_disable_vport(struct mlx5_eswitch *esw,
@@ -1770,16 +1818,15 @@ static void esw_disable_vport(struct mlx5_eswitch *esw,
esw_vport_change_handle_locked(vport);
vport->enabled_events = 0;
esw_vport_disable_qos(esw, vport);
- if (!mlx5_esw_is_manager_vport(esw, vport_num) &&
- esw->mode == MLX5_ESWITCH_LEGACY) {
+
+ if (!mlx5_esw_is_manager_vport(esw, vport->vport) &&
+ esw->mode == MLX5_ESWITCH_LEGACY)
mlx5_modify_vport_admin_state(esw->dev,
MLX5_VPORT_STATE_OP_MOD_ESW_VPORT,
vport_num, 1,
MLX5_VPORT_ADMIN_STATE_DOWN);
- esw_vport_disable_egress_acl(esw, vport);
- esw_vport_disable_ingress_acl(esw, vport);
- esw_legacy_vport_destroy_drop_counters(vport);
- }
+
+ esw_vport_cleanup_acl(esw, vport);
esw->enabled_vports--;
done:
--
2.21.0
next prev parent reply other threads:[~2019-10-28 23:36 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-28 23:34 [PATCH mlx5-next 00/18] Mellanox, mlx5-next updates 28-10-2019 Saeed Mahameed
2019-10-28 23:34 ` [PATCH mlx5-next 01/18] net/mlx5: Fixed a typo in a comment in esw_del_uc_addr() Saeed Mahameed
2019-10-28 23:34 ` [PATCH mlx5-next 02/18] net/mlx5: E-Switch, Rename egress config to generic name Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 03/18] net/mlx5: E-Switch, Rename ingress acl config in offloads mode Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 04/18] net/mlx5: E-switch, Introduce and use vlan rule config helper Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 05/18] net/mlx5: Introduce and use mlx5_esw_is_manager_vport() Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 06/18] net/mlx5: Correct comment for legacy fields Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 07/18] net/mlx5: Move metdata fields under offloads structure Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 08/18] net/mlx5: Move legacy drop counter and rule under legacy structure Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 09/18] net/mlx5: Tide up state_lock and vport enabled flag usage Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 10/18] net/mlx5: E-switch, Prepare code to handle vport enable error Saeed Mahameed
2019-10-28 23:35 ` Saeed Mahameed [this message]
2019-10-28 23:35 ` [PATCH mlx5-next 12/18] net/mlx5: Move ACL drop counters life cycle close to ACL lifecycle Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 13/18] net/mlx5: E-switch, Offloads introduce and use per vport acl tables APIs Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 14/18] net/mlx5: E-switch, Offloads shift ACL programming during enable/disable vport Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 15/18] net/mlx5: Restrict metadata disablement to offloads mode Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 16/18] net/mlx5: Refactor ingress acl configuration Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 17/18] net/mlx5: E-switch, Enable metadata on own vport Saeed Mahameed
2019-10-28 23:35 ` [PATCH mlx5-next 18/18] IB/mlx5: Introduce and use mlx5_core_is_vf() Saeed Mahameed
2019-11-01 21:41 ` [PATCH mlx5-next 00/18] Mellanox, mlx5-next updates 28-10-2019 Saeed Mahameed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191028233440.5564-12-saeedm@mellanox.com \
--to=saeedm@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=parav@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).