From: Parav Pandit <parav@mellanox.com>
To: alex.williamson@redhat.com, davem@davemloft.net,
kvm@vger.kernel.org, netdev@vger.kernel.org
Cc: saeedm@mellanox.com, kwankhede@nvidia.com, leon@kernel.org,
cohuck@redhat.com, jiri@mellanox.com, linux-rdma@vger.kernel.org,
Parav Pandit <parav@mellanox.com>, Vu Pham <vuhuong@mellanox.com>
Subject: [PATCH net-next 04/19] net/mlx5: Introduce SF life cycle APIs to allocate/free
Date: Thu, 7 Nov 2019 10:08:19 -0600 [thread overview]
Message-ID: <20191107160834.21087-4-parav@mellanox.com> (raw)
In-Reply-To: <20191107160834.21087-1-parav@mellanox.com>
Introduce SF life cycle APIs to allocate, deallocate it at device
level.
Make use of low level device life cycle APIs and provide higher level
API for a usable SF creation/deletion.
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 +
.../net/ethernet/mellanox/mlx5/core/main.c | 43 +++++--
.../ethernet/mellanox/mlx5/core/meddev/sf.c | 116 +++++++++++++++++-
.../ethernet/mellanox/mlx5/core/meddev/sf.h | 18 +++
.../ethernet/mellanox/mlx5/core/mlx5_core.h | 2 +
5 files changed, 172 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index e9a326939f5e..3f1a9a73b25f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -317,6 +317,7 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op,
case MLX5_CMD_OP_DEALLOC_MEMIC:
case MLX5_CMD_OP_PAGE_FAULT_RESUME:
case MLX5_CMD_OP_QUERY_ESW_FUNCTIONS:
+ case MLX5_CMD_OP_DEALLOC_SF:
return MLX5_CMD_STAT_OK;
case MLX5_CMD_OP_QUERY_HCA_CAP:
@@ -449,6 +450,7 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op,
case MLX5_CMD_OP_MODIFY_XRQ:
case MLX5_CMD_OP_RELEASE_XRQ_ERROR:
case MLX5_CMD_OP_QUERY_SF_PARTITION:
+ case MLX5_CMD_OP_ALLOC_SF:
*status = MLX5_DRIVER_STATUS_ABORTED;
*synd = MLX5_DRIVER_SYND;
return -EIO;
@@ -476,6 +478,8 @@ const char *mlx5_command_str(int command)
MLX5_COMMAND_STR_CASE(SET_ISSI);
MLX5_COMMAND_STR_CASE(SET_DRIVER_VERSION);
MLX5_COMMAND_STR_CASE(QUERY_SF_PARTITION);
+ MLX5_COMMAND_STR_CASE(ALLOC_SF);
+ MLX5_COMMAND_STR_CASE(DEALLOC_SF);
MLX5_COMMAND_STR_CASE(CREATE_MKEY);
MLX5_COMMAND_STR_CASE(QUERY_MKEY);
MLX5_COMMAND_STR_CASE(DESTROY_MKEY);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 174ade250f62..092e2c90caf1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -644,30 +644,53 @@ static int mlx5_core_set_hca_defaults(struct mlx5_core_dev *dev)
return ret;
}
-int mlx5_core_enable_hca(struct mlx5_core_dev *dev, u16 func_id)
+static int enable_hca(struct mlx5_core_dev *dev, u16 func_id, bool ecpu)
{
- u32 out[MLX5_ST_SZ_DW(enable_hca_out)] = {0};
- u32 in[MLX5_ST_SZ_DW(enable_hca_in)] = {0};
+ u32 out[MLX5_ST_SZ_DW(enable_hca_out)] = {};
+ u32 in[MLX5_ST_SZ_DW(enable_hca_in)] = {};
MLX5_SET(enable_hca_in, in, opcode, MLX5_CMD_OP_ENABLE_HCA);
MLX5_SET(enable_hca_in, in, function_id, func_id);
- MLX5_SET(enable_hca_in, in, embedded_cpu_function,
- dev->caps.embedded_cpu);
+ MLX5_SET(enable_hca_in, in, embedded_cpu_function, ecpu);
return mlx5_cmd_exec(dev, &in, sizeof(in), &out, sizeof(out));
}
-int mlx5_core_disable_hca(struct mlx5_core_dev *dev, u16 func_id)
+int mlx5_core_enable_hca(struct mlx5_core_dev *dev, u16 func_id)
{
- u32 out[MLX5_ST_SZ_DW(disable_hca_out)] = {0};
- u32 in[MLX5_ST_SZ_DW(disable_hca_in)] = {0};
+ return enable_hca(dev, func_id, dev->caps.embedded_cpu);
+}
+
+int mlx5_core_enable_sf_hca(struct mlx5_core_dev *dev, u16 sf_func_id)
+{
+ /* When enabling SF, it doesn't matter if is enabled on ECPF or PF,
+ * embedded_cpu bit must be cleared as expected by device firmware.
+ * SF function ids are split between ECPF And PF. A given SF is for
+ * ECPF or for PF is decided by SF's function id by the firmware.
+ */
+ return enable_hca(dev, sf_func_id, 0);
+}
+
+static int disable_hca(struct mlx5_core_dev *dev, u16 func_id, bool ecpu)
+{
+ u32 out[MLX5_ST_SZ_DW(disable_hca_out)] = {};
+ u32 in[MLX5_ST_SZ_DW(disable_hca_in)] = {};
MLX5_SET(disable_hca_in, in, opcode, MLX5_CMD_OP_DISABLE_HCA);
MLX5_SET(disable_hca_in, in, function_id, func_id);
- MLX5_SET(enable_hca_in, in, embedded_cpu_function,
- dev->caps.embedded_cpu);
+ MLX5_SET(enable_hca_in, in, embedded_cpu_function, ecpu);
return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
}
+int mlx5_core_disable_hca(struct mlx5_core_dev *dev, u16 func_id)
+{
+ return disable_hca(dev, func_id, dev->caps.embedded_cpu);
+}
+
+int mlx5_core_disable_sf_hca(struct mlx5_core_dev *dev, u16 sf_func_id)
+{
+ return disable_hca(dev, sf_func_id, 0);
+}
+
u64 mlx5_read_internal_timer(struct mlx5_core_dev *dev,
struct ptp_system_timestamp *sts)
{
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/meddev/sf.c b/drivers/net/ethernet/mellanox/mlx5/core/meddev/sf.c
index 3324cc53efe3..d57109a9c53b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/meddev/sf.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/meddev/sf.c
@@ -3,6 +3,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/io-mapping.h>
+#include <linux/bitmap.h>
#include "sf.h"
#include "mlx5_core.h"
@@ -31,7 +33,6 @@ int mlx5_sf_table_init(struct mlx5_core_dev *dev,
if (!out)
return -ENOMEM;
- mutex_init(&sf_table->lock);
/* SFs BAR is implemented in PCI BAR2 */
sf_table->base_address = pci_resource_start(dev->pdev, 2);
@@ -46,6 +47,13 @@ int mlx5_sf_table_init(struct mlx5_core_dev *dev,
sf_table->log_sf_bar_size =
MLX5_GET(sf_partition, sf_parts, log_sf_bar_size);
+ sf_table->sf_id_bitmap = bitmap_zalloc(sf_table->max_sfs, GFP_KERNEL);
+ if (!sf_table->sf_id_bitmap) {
+ err = -ENOMEM;
+ goto free_outmem;
+ }
+ mutex_init(&sf_table->lock);
+
mlx5_core_dbg(dev, "supported partitions(%d)\n", n_support);
mlx5_core_dbg(dev, "SF_part(0) log_num_sf(%d) log_sf_bar_size(%d)\n",
sf_table->max_sfs, sf_table->log_sf_bar_size);
@@ -59,4 +67,110 @@ void mlx5_sf_table_cleanup(struct mlx5_core_dev *dev,
struct mlx5_sf_table *sf_table)
{
mutex_destroy(&sf_table->lock);
+ bitmap_free(sf_table->sf_id_bitmap);
+}
+
+static int mlx5_cmd_alloc_sf(struct mlx5_core_dev *mdev, u16 function_id)
+{
+ u32 out[MLX5_ST_SZ_DW(alloc_sf_out)] = {};
+ u32 in[MLX5_ST_SZ_DW(alloc_sf_in)] = {};
+
+ MLX5_SET(alloc_sf_in, in, opcode, MLX5_CMD_OP_ALLOC_SF);
+ MLX5_SET(alloc_sf_in, in, function_id, function_id);
+
+ return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+}
+
+static int mlx5_cmd_dealloc_sf(struct mlx5_core_dev *mdev, u16 function_id)
+{
+ u32 out[MLX5_ST_SZ_DW(dealloc_sf_out)] = {};
+ u32 in[MLX5_ST_SZ_DW(dealloc_sf_in)] = {};
+
+ MLX5_SET(dealloc_sf_in, in, opcode, MLX5_CMD_OP_DEALLOC_SF);
+ MLX5_SET(dealloc_sf_in, in, function_id, function_id);
+
+ return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
+}
+
+static int alloc_sf_id(struct mlx5_sf_table *sf_table, u16 *sf_id)
+{
+ int ret = 0;
+ u16 idx;
+
+ mutex_lock(&sf_table->lock);
+ idx = find_first_zero_bit(sf_table->sf_id_bitmap, sf_table->max_sfs);
+ if (idx == sf_table->max_sfs) {
+ ret = -ENOSPC;
+ goto done;
+ }
+ bitmap_set(sf_table->sf_id_bitmap, idx, 1);
+ *sf_id = idx;
+done:
+ mutex_unlock(&sf_table->lock);
+ return ret;
+}
+
+static void free_sf_id(struct mlx5_sf_table *sf_table, u16 sf_id)
+{
+ mutex_lock(&sf_table->lock);
+ bitmap_clear(sf_table->sf_id_bitmap, sf_id, 1);
+ mutex_unlock(&sf_table->lock);
+}
+
+static u16 mlx5_sf_hw_id(const struct mlx5_core_dev *coredev, u16 sf_id)
+{
+ return mlx5_sf_base_id(coredev) + sf_id;
+}
+
+/* Perform SF allocation using parent device BAR. */
+struct mlx5_sf *
+mlx5_sf_alloc(struct mlx5_core_dev *coredev, struct mlx5_sf_table *sf_table,
+ struct device *dev)
+{
+ struct mlx5_sf *sf;
+ u16 hw_function_id;
+ u16 sf_id;
+ int ret;
+
+ sf = kzalloc(sizeof(*sf), GFP_KERNEL);
+ if (!sf)
+ return ERR_PTR(-ENOMEM);
+
+ ret = alloc_sf_id(sf_table, &sf_id);
+ if (ret)
+ goto id_err;
+
+ hw_function_id = mlx5_sf_hw_id(coredev, sf_id);
+ ret = mlx5_cmd_alloc_sf(coredev, hw_function_id);
+ if (ret)
+ goto alloc_sf_err;
+
+ ret = mlx5_core_enable_sf_hca(coredev, hw_function_id);
+ if (ret)
+ goto enable_err;
+
+ sf->idx = sf_id;
+ sf->base_addr = sf_table->base_address +
+ (sf->idx << (sf_table->log_sf_bar_size + 12));
+ return sf;
+
+enable_err:
+ mlx5_cmd_dealloc_sf(coredev, hw_function_id);
+alloc_sf_err:
+ free_sf_id(sf_table, sf_id);
+id_err:
+ kfree(sf);
+ return ERR_PTR(ret);
+}
+
+void mlx5_sf_free(struct mlx5_core_dev *coredev, struct mlx5_sf_table *sf_table,
+ struct mlx5_sf *sf)
+{
+ u16 hw_function_id;
+
+ hw_function_id = mlx5_sf_hw_id(coredev, sf->idx);
+ mlx5_core_disable_sf_hca(coredev, hw_function_id);
+ mlx5_cmd_dealloc_sf(coredev, hw_function_id);
+ free_sf_id(sf_table, sf->idx);
+ kfree(sf);
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/meddev/sf.h b/drivers/net/ethernet/mellanox/mlx5/core/meddev/sf.h
index 434c193a06d0..1e1ba388504c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/meddev/sf.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/meddev/sf.h
@@ -6,11 +6,18 @@
#include <linux/mlx5/driver.h>
#include <linux/mlx5/eswitch.h>
+#include <linux/idr.h>
+
+struct mlx5_sf {
+ phys_addr_t base_addr;
+ u16 idx; /* Index allocated by the SF table bitmap */
+};
struct mlx5_sf_table {
phys_addr_t base_address;
/* Protects sfs life cycle and sf enable/disable flows */
struct mutex lock;
+ unsigned long *sf_id_bitmap;
u16 max_sfs;
u16 log_sf_bar_size;
};
@@ -22,11 +29,22 @@ static inline bool mlx5_core_is_sf_supported(const struct mlx5_core_dev *dev)
MLX5_CAP_GEN(dev, sf);
}
+static inline u16 mlx5_sf_base_id(const struct mlx5_core_dev *dev)
+{
+ return MLX5_CAP_GEN(dev, sf_base_id);
+}
+
#ifdef CONFIG_MLX5_MDEV
int mlx5_sf_table_init(struct mlx5_core_dev *dev,
struct mlx5_sf_table *sf_table);
void mlx5_sf_table_cleanup(struct mlx5_core_dev *dev,
struct mlx5_sf_table *sf_table);
+
+struct mlx5_sf *
+mlx5_sf_alloc(struct mlx5_core_dev *coredev, struct mlx5_sf_table *sf_table,
+ struct device *dev);
+void mlx5_sf_free(struct mlx5_core_dev *coredev, struct mlx5_sf_table *sf_table,
+ struct mlx5_sf *sf);
#endif
#endif
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
index b100489dc85c..4e6bdae3ebfa 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
@@ -133,6 +133,8 @@ void mlx5_sriov_detach(struct mlx5_core_dev *dev);
int mlx5_core_sriov_configure(struct pci_dev *dev, int num_vfs);
int mlx5_core_enable_hca(struct mlx5_core_dev *dev, u16 func_id);
int mlx5_core_disable_hca(struct mlx5_core_dev *dev, u16 func_id);
+int mlx5_core_enable_sf_hca(struct mlx5_core_dev *dev, u16 sf_func_id);
+int mlx5_core_disable_sf_hca(struct mlx5_core_dev *dev, u16 sf_func_id);
int mlx5_create_scheduling_element_cmd(struct mlx5_core_dev *dev, u8 hierarchy,
void *context, u32 *element_id);
int mlx5_modify_scheduling_element_cmd(struct mlx5_core_dev *dev, u8 hierarchy,
--
2.19.2
next prev parent reply other threads:[~2019-11-07 16:09 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-07 16:04 [PATCH net-next 00/19] Mellanox, mlx5 sub function support Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 01/19] net/mlx5: E-switch, Move devlink port close to eswitch port Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 02/19] net/mlx5: E-Switch, Add SF vport, vport-rep support Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 03/19] net/mlx5: Introduce SF table framework Parav Pandit
2019-11-07 16:08 ` Parav Pandit [this message]
2019-11-07 16:08 ` [PATCH net-next 05/19] net/mlx5: E-Switch, Enable/disable SF's vport during SF life cycle Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 06/19] net/mlx5: Add support for mediated devices in switchdev mode Parav Pandit
2019-11-08 10:32 ` Jiri Pirko
2019-11-08 16:03 ` Parav Pandit
2019-11-08 16:22 ` Jiri Pirko
2019-11-08 16:29 ` Parav Pandit
2019-11-08 18:01 ` Jiri Pirko
2019-11-08 18:04 ` Jiri Pirko
2019-11-08 18:21 ` Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 07/19] vfio/mdev: Introduce sha1 based mdev alias Parav Pandit
2019-11-08 11:04 ` Jiri Pirko
2019-11-08 15:59 ` Parav Pandit
2019-11-08 16:28 ` Jiri Pirko
2019-11-08 11:10 ` Cornelia Huck
2019-11-08 16:03 ` Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 08/19] vfio/mdev: Make mdev alias unique among all mdevs Parav Pandit
2019-11-08 10:49 ` Jiri Pirko
2019-11-08 15:13 ` Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 09/19] vfio/mdev: Expose mdev alias in sysfs tree Parav Pandit
2019-11-08 13:22 ` Jiri Pirko
2019-11-08 18:03 ` Alex Williamson
2019-11-08 18:16 ` Jiri Pirko
2019-11-07 16:08 ` [PATCH net-next 10/19] vfio/mdev: Introduce an API mdev_alias Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 11/19] vfio/mdev: Improvise mdev life cycle and parent removal scheme Parav Pandit
2019-11-08 13:01 ` Cornelia Huck
2019-11-08 16:12 ` Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 12/19] devlink: Introduce mdev port flavour Parav Pandit
2019-11-07 20:38 ` Jakub Kicinski
2019-11-07 21:03 ` Parav Pandit
2019-11-08 1:17 ` Jakub Kicinski
2019-11-08 1:44 ` Parav Pandit
2019-11-08 2:20 ` Jakub Kicinski
2019-11-08 2:31 ` Parav Pandit
2019-11-08 9:46 ` Jiri Pirko
2019-11-08 15:45 ` Parav Pandit
2019-11-08 16:31 ` Jiri Pirko
2019-11-08 16:43 ` Parav Pandit
2019-11-08 18:11 ` Jiri Pirko
2019-11-08 18:23 ` Parav Pandit
2019-11-08 18:34 ` Jiri Pirko
2019-11-08 18:56 ` Parav Pandit
2019-11-08 9:30 ` Jiri Pirko
2019-11-08 15:41 ` Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 13/19] net/mlx5: Register SF devlink port Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 14/19] net/mlx5: Share irqs between SFs and parent PCI device Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 15/19] net/mlx5: Add load/unload routines for SF driver binding Parav Pandit
2019-11-08 9:48 ` Jiri Pirko
2019-11-08 11:13 ` Jiri Pirko
2019-11-07 16:08 ` [PATCH net-next 16/19] net/mlx5: Implement dma ops and params for mediated device Parav Pandit
2019-11-07 20:42 ` Jakub Kicinski
2019-11-07 21:30 ` Parav Pandit
2019-11-08 1:16 ` Jakub Kicinski
2019-11-08 6:37 ` Christoph Hellwig
2019-11-08 15:29 ` Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 17/19] net/mlx5: Add mdev driver to bind to mdev devices Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 18/19] Documentation: net: mlx5: Add mdev usage documentation Parav Pandit
2019-11-07 16:08 ` [PATCH net-next 19/19] mtty: Optionally support mtty alias Parav Pandit
2019-11-08 6:26 ` Leon Romanovsky
2019-11-08 10:45 ` Jiri Pirko
2019-11-08 15:08 ` Parav Pandit
2019-11-08 15:15 ` Jiri Pirko
2019-11-08 13:46 ` Cornelia Huck
2019-11-08 15:10 ` Parav Pandit
2019-11-08 15:28 ` Cornelia Huck
2019-11-08 15:30 ` Parav Pandit
2019-11-08 17:54 ` Alex Williamson
2019-11-08 9:51 ` [PATCH net-next 01/19] net/mlx5: E-switch, Move devlink port close to eswitch port Jiri Pirko
2019-11-08 15:50 ` Parav Pandit
2019-11-07 17:03 ` [PATCH net-next 00/19] Mellanox, mlx5 sub function support Leon Romanovsky
2019-11-07 20:10 ` Parav Pandit
2019-11-08 6:20 ` Leon Romanovsky
2019-11-08 15:01 ` Parav Pandit
2019-11-07 20:32 ` Jakub Kicinski
2019-11-07 20:52 ` Parav Pandit
2019-11-08 1:16 ` Jakub Kicinski
2019-11-08 1:49 ` Parav Pandit
2019-11-08 2:12 ` Jakub Kicinski
2019-11-08 12:12 ` Jiri Pirko
2019-11-08 14:40 ` Jason Gunthorpe
2019-11-08 15:40 ` Parav Pandit
2019-11-08 19:12 ` Jakub Kicinski
2019-11-08 20:12 ` Jason Gunthorpe
2019-11-08 20:20 ` Parav Pandit
2019-11-08 20:32 ` Jason Gunthorpe
2019-11-08 20:52 ` gregkh
2019-11-08 20:34 ` Alex Williamson
2019-11-08 21:05 ` Jason Gunthorpe
2019-11-08 21:19 ` gregkh
2019-11-08 21:52 ` Alex Williamson
2019-11-08 22:48 ` Parav Pandit
2019-11-09 0:57 ` Jason Gunthorpe
2019-11-09 17:41 ` Jakub Kicinski
2019-11-10 19:04 ` Jason Gunthorpe
2019-11-10 19:48 ` Parav Pandit
2019-11-11 14:17 ` Jiri Pirko
2019-11-11 14:58 ` Parav Pandit
2019-11-11 15:06 ` Jiri Pirko
2019-11-19 4:51 ` Parav Pandit
2019-11-09 0:12 ` Jason Gunthorpe
2019-11-09 0:45 ` Parav Pandit
2019-11-11 2:19 ` Jason Wang
2019-11-08 21:45 ` Jakub Kicinski
2019-11-09 0:44 ` Jason Gunthorpe
2019-11-09 8:46 ` gregkh
2019-11-09 11:18 ` Jiri Pirko
2019-11-09 17:28 ` Jakub Kicinski
2019-11-10 9:16 ` gregkh
2019-11-09 17:27 ` Jakub Kicinski
2019-11-10 9:18 ` gregkh
2019-11-11 3:46 ` Jakub Kicinski
2019-11-11 5:18 ` Parav Pandit
2019-11-11 13:30 ` Jiri Pirko
2019-11-11 14:14 ` gregkh
2019-11-11 14:37 ` Jiri Pirko
2019-11-10 19:37 ` Jason Gunthorpe
2019-11-11 3:57 ` Jakub Kicinski
2019-11-08 16:06 ` Parav Pandit
2019-11-08 19:06 ` Jakub Kicinski
2019-11-08 19:34 ` Parav Pandit
2019-11-08 19:48 ` Jakub Kicinski
2019-11-08 19:41 ` Jiri Pirko
2019-11-08 20:40 ` Parav Pandit
2019-11-08 21:21 ` Jakub Kicinski
2019-11-08 21:39 ` Jiri Pirko
2019-11-08 21:51 ` Jakub Kicinski
2019-11-08 22:21 ` Jiri Pirko
2019-11-07 23:57 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191107160834.21087-4-parav@mellanox.com \
--to=parav@mellanox.com \
--cc=alex.williamson@redhat.com \
--cc=cohuck@redhat.com \
--cc=davem@davemloft.net \
--cc=jiri@mellanox.com \
--cc=kvm@vger.kernel.org \
--cc=kwankhede@nvidia.com \
--cc=leon@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=saeedm@mellanox.com \
--cc=vuhuong@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).