Netdev Archive on
 help / color / Atom feed
From: Vladimir Oltean <>
	Vladimir Oltean <>
Subject: [PATCH net-next] net: dsa: felix: Don't error out on disabled ports with no phy-mode
Date: Thu, 16 Jan 2020 20:34:49 +0200
Message-ID: <> (raw)

From: Vladimir Oltean <>

The felix_parse_ports_node function was tested only on device trees
where all ports were enabled. Fix this check so that the driver
continues to probe only with the ports where status is not "disabled",
as expected.

Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK")
Signed-off-by: Vladimir Oltean <>
 drivers/net/dsa/ocelot/felix.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index feccb6201660..d6ee089dbfe1 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -328,6 +328,9 @@ static int felix_parse_ports_node(struct felix *felix,
 		u32 port;
 		int err;
+		if (!of_device_is_available(child))
+			continue;
 		/* Get switch port number from DT */
 		if (of_property_read_u32(child, "reg", &port) < 0) {
 			dev_err(dev, "Port number not defined in device tree "

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-16 18:34 Vladimir Oltean [this message]
2020-01-16 20:50 ` Andrew Lunn

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Netdev Archive on

Archives are clonable:
	git clone --mirror netdev/git/0.git
	git clone --mirror netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ \
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone