Netdev Archive on
 help / color / Atom feed
From: Andrew Lunn <>
To: Vladimir Oltean <>
	Vladimir Oltean <>
Subject: Re: [PATCH v2 net-next] net: dsa: felix: Don't error out on disabled ports with no phy-mode
Date: Thu, 16 Jan 2020 21:52:04 +0100
Message-ID: <> (raw)
In-Reply-To: <>

On Thu, Jan 16, 2020 at 08:41:53PM +0200, Vladimir Oltean wrote:
> From: Vladimir Oltean <>
> The felix_parse_ports_node function was tested only on device trees
> where all ports were enabled. Fix this check so that the driver
> continues to probe only with the ports where status is not "disabled",
> as expected.
> Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK")
> Signed-off-by: Vladimir Oltean <>

Reviewed-by: Andrew Lunn <>


  parent reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-16 18:41 Vladimir Oltean
2020-01-16 18:47 ` Florian Fainelli
2020-01-16 20:52 ` Andrew Lunn [this message]
2020-01-17 12:23 ` David Miller

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Netdev Archive on

Archives are clonable:
	git clone --mirror netdev/git/0.git
	git clone --mirror netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ \
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone