* [PATCH v2 1/4] net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
@ 2020-03-26 5:57 Masahiro Yamada
2020-03-26 5:57 ` [PATCH v2 2/4] net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) " Masahiro Yamada
2020-03-26 5:57 ` [PATCH v2 3/4] net: wan: wanxl: refactor the firmware rebuild rule Masahiro Yamada
0 siblings, 2 replies; 3+ messages in thread
From: Masahiro Yamada @ 2020-03-26 5:57 UTC (permalink / raw)
To: linux-kbuild
Cc: clang-built-linux, Geert Uytterhoeven, Masahiro Yamada,
David S. Miller, linux-kernel, netdev
As far as I understood from the Kconfig help text, this build rule is
used to rebuild the driver firmware, which runs on an old m68k-based
chip. So, you need m68k tools for the firmware rebuild.
wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI.
So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other
words, ifeq ($(ARCH),m68k) is false here.
I am keeping the dead code for now, but rebuilding the firmware requires
'as68k' and 'ld68k', which I do not have in hand.
Instead, the kernel.org m68k GCC [1] successfully built it.
Allowing a user to pass in CROSS_COMPILE_M68K= is handier.
[1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
Changes in v2:
- New patch
drivers/net/wan/Kconfig | 2 +-
drivers/net/wan/Makefile | 12 ++++++------
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 4530840e15ef..dbc0e3f7a3e2 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -200,7 +200,7 @@ config WANXL_BUILD_FIRMWARE
depends on WANXL && !PREVENT_FIRMWARE_BUILD
help
Allows you to rebuild firmware run by the QUICC processor.
- It requires as68k, ld68k and hexdump programs.
+ It requires m68k toolchains and hexdump programs.
You should never need this option, say N.
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 701f5d2fe3b6..995277c657a1 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -40,17 +40,17 @@ $(obj)/wanxl.o: $(obj)/wanxlfw.inc
ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
ifeq ($(ARCH),m68k)
- AS68K = $(AS)
- LD68K = $(LD)
+ M68KAS = $(AS)
+ M68KLD = $(LD)
else
- AS68K = as68k
- LD68K = ld68k
+ M68KAS = $(CROSS_COMPILE_M68K)as
+ M68KLD = $(CROSS_COMPILE_M68K)ld
endif
quiet_cmd_build_wanxlfw = BLD FW $@
cmd_build_wanxlfw = \
- $(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(AS68K) -m68360 -o $(obj)/wanxlfw.o; \
- $(LD68K) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
+ $(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(M68KAS) -m68360 -o $(obj)/wanxlfw.o; \
+ $(M68KLD) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
hexdump -ve '"\n" 16/1 "0x%02X,"' $(obj)/wanxlfw.bin | sed 's/0x ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' >$(obj)/wanxlfw.inc; \
rm -f $(obj)/wanxlfw.bin $(obj)/wanxlfw.o
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v2 2/4] net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
2020-03-26 5:57 [PATCH v2 1/4] net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware Masahiro Yamada
@ 2020-03-26 5:57 ` Masahiro Yamada
2020-03-26 5:57 ` [PATCH v2 3/4] net: wan: wanxl: refactor the firmware rebuild rule Masahiro Yamada
1 sibling, 0 replies; 3+ messages in thread
From: Masahiro Yamada @ 2020-03-26 5:57 UTC (permalink / raw)
To: linux-kbuild
Cc: clang-built-linux, Geert Uytterhoeven, Masahiro Yamada,
David S. Miller, linux-kernel, netdev
The firmware source, wanxlfw.S, is currently compiled by the combo of
$(CPP) and $(M68KAS). This is not what we usually do for compiling *.S
files. In fact, this Makefile is the only user of $(AS) in the kernel
build.
Instead of combining $(CPP) and (AS) from different tool sets, using
$(M68KCC) as an assembler driver is simpler, and saner.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
Changes in v2: None
drivers/net/wan/Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 995277c657a1..cf7a0a65aae8 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -40,16 +40,16 @@ $(obj)/wanxl.o: $(obj)/wanxlfw.inc
ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
ifeq ($(ARCH),m68k)
- M68KAS = $(AS)
+ M68KCC = $(CC)
M68KLD = $(LD)
else
- M68KAS = $(CROSS_COMPILE_M68K)as
+ M68KCC = $(CROSS_COMPILE_M68K)gcc
M68KLD = $(CROSS_COMPILE_M68K)ld
endif
quiet_cmd_build_wanxlfw = BLD FW $@
cmd_build_wanxlfw = \
- $(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(M68KAS) -m68360 -o $(obj)/wanxlfw.o; \
+ $(M68KCC) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi -c -o $(obj)/wanxlfw.o $<; \
$(M68KLD) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
hexdump -ve '"\n" 16/1 "0x%02X,"' $(obj)/wanxlfw.bin | sed 's/0x ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' >$(obj)/wanxlfw.inc; \
rm -f $(obj)/wanxlfw.bin $(obj)/wanxlfw.o
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v2 3/4] net: wan: wanxl: refactor the firmware rebuild rule
2020-03-26 5:57 [PATCH v2 1/4] net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware Masahiro Yamada
2020-03-26 5:57 ` [PATCH v2 2/4] net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) " Masahiro Yamada
@ 2020-03-26 5:57 ` Masahiro Yamada
1 sibling, 0 replies; 3+ messages in thread
From: Masahiro Yamada @ 2020-03-26 5:57 UTC (permalink / raw)
To: linux-kbuild
Cc: clang-built-linux, Geert Uytterhoeven, Masahiro Yamada,
David S. Miller, linux-kernel, netdev
Split the big recipe into 3 stages, compile, link, and hexdump.
After this commit, the build log with CONFIG_WANXL_BUILD_FIRMWARE
will look like this:
M68KAS drivers/net/wan/wanxlfw.o
M68KLD drivers/net/wan/wanxlfw.bin
BLDFW drivers/net/wan/wanxlfw.inc
CC [M] drivers/net/wan/wanxl.o
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
Changes in v2: None
drivers/net/wan/Makefile | 29 +++++++++++++++++++----------
1 file changed, 19 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index cf7a0a65aae8..380271a011e4 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -47,14 +47,23 @@ else
M68KLD = $(CROSS_COMPILE_M68K)ld
endif
-quiet_cmd_build_wanxlfw = BLD FW $@
- cmd_build_wanxlfw = \
- $(M68KCC) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi -c -o $(obj)/wanxlfw.o $<; \
- $(M68KLD) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
- hexdump -ve '"\n" 16/1 "0x%02X,"' $(obj)/wanxlfw.bin | sed 's/0x ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' >$(obj)/wanxlfw.inc; \
- rm -f $(obj)/wanxlfw.bin $(obj)/wanxlfw.o
-
-$(obj)/wanxlfw.inc: $(src)/wanxlfw.S
- $(call if_changed_dep,build_wanxlfw)
-targets += wanxlfw.inc
+quiet_cmd_build_wanxlfw = BLDFW $@
+ cmd_build_wanxlfw = hexdump -ve '"\n" 16/1 "0x%02X,"' $< | \
+ sed 's/0x ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' > $@
+
+$(obj)/wanxlfw.inc: $(obj)/wanxlfw.bin FORCE
+ $(call if_changed,build_wanxlfw)
+
+quiet_cmd_m68kld_bin_o = M68KLD $@
+ cmd_m68kld_bin_o = $(M68KLD) --oformat binary -Ttext 0x1000 $< -o $@
+
+$(obj)/wanxlfw.bin: $(obj)/wanxlfw.o FORCE
+ $(call if_changed,m68kld_bin_o)
+
+quiet_cmd_m68kas_o_S = M68KAS $@
+ cmd_m68kas_o_S = $(M68KCC) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi -c -o $@ $<
+
+$(obj)/wanxlfw.o: $(src)/wanxlfw.S FORCE
+ $(call if_changed_dep,m68kas_o_S)
endif
+targets += wanxlfw.inc wanxlfw.bin wanxlfw.o
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-03-26 5:58 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-26 5:57 [PATCH v2 1/4] net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware Masahiro Yamada
2020-03-26 5:57 ` [PATCH v2 2/4] net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) " Masahiro Yamada
2020-03-26 5:57 ` [PATCH v2 3/4] net: wan: wanxl: refactor the firmware rebuild rule Masahiro Yamada
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).