netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: andrew@lunn.ch, f.fainelli@gmail.com, vivien.didelot@gmail.com,
	davem@davemloft.net, jakub.kicinski@netronome.com
Cc: murali.policharla@broadcom.com, stephen@networkplumber.org,
	jiri@resnulli.us, idosch@idosch.org, kuba@kernel.org,
	nikolay@cumulusnetworks.com, netdev@vger.kernel.org
Subject: [PATCH v3 net-next 8/8] net: dsa: felix: support changing the MTU
Date: Fri, 27 Mar 2020 00:40:40 +0200	[thread overview]
Message-ID: <20200326224040.32014-9-olteanv@gmail.com> (raw)
In-Reply-To: <20200326224040.32014-1-olteanv@gmail.com>

From: Vladimir Oltean <vladimir.oltean@nxp.com>

Changing the MTU for this switch means altering the
DEV_GMII:MAC_CFG_STATUS:MAC_MAXLEN_CFG field MAX_LEN, which in turn
limits the size of frames that can be received.

Special accounting needs to be done for the DSA CPU port (NPI port in
hardware terms). The NPI port configuration needs to be held inside the
private ocelot structure, since it is now accessed from multiple places.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v3:
Now setting the ds->mtu_enforcement_ingress variable to true.

Changes in v2:
None.

 drivers/net/dsa/ocelot/felix.c     | 19 +++++++++++++
 drivers/net/ethernet/mscc/ocelot.c | 45 +++++++++++++++++++++++-------
 include/soc/mscc/ocelot.h          |  7 +++++
 3 files changed, 61 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 9f9efb974003..eef9fa812a3c 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -533,6 +533,7 @@ static int felix_setup(struct dsa_switch *ds)
 			 ANA_PGID_PGID_PGID(GENMASK(ocelot->num_phys_ports, 0)),
 			 ANA_PGID_PGID, PGID_UC);
 
+	ds->mtu_enforcement_ingress = true;
 	/* It looks like the MAC/PCS interrupt register - PM0_IEVENT (0x8040)
 	 * isn't instantiated for the Felix PF.
 	 * In-band AN may take a few ms to complete, so we need to poll.
@@ -610,6 +611,22 @@ static bool felix_txtstamp(struct dsa_switch *ds, int port,
 	return false;
 }
 
+static int felix_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	ocelot_port_set_maxlen(ocelot, port, new_mtu);
+
+	return 0;
+}
+
+static int felix_get_max_mtu(struct dsa_switch *ds, int port)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_get_max_mtu(ocelot, port);
+}
+
 static int felix_cls_flower_add(struct dsa_switch *ds, int port,
 				struct flow_cls_offload *cls, bool ingress)
 {
@@ -665,6 +682,8 @@ static const struct dsa_switch_ops felix_switch_ops = {
 	.port_hwtstamp_set	= felix_hwtstamp_set,
 	.port_rxtstamp		= felix_rxtstamp,
 	.port_txtstamp		= felix_txtstamp,
+	.port_change_mtu	= felix_change_mtu,
+	.port_max_mtu		= felix_get_max_mtu,
 	.cls_flower_add		= felix_cls_flower_add,
 	.cls_flower_del		= felix_cls_flower_del,
 	.cls_flower_stats	= felix_cls_flower_stats,
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 114d6053aa26..b5f925c1b5b2 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1998,13 +1998,25 @@ EXPORT_SYMBOL(ocelot_switchdev_blocking_nb);
 
 /* Configure the maximum SDU (L2 payload) on RX to the value specified in @sdu.
  * The length of VLAN tags is accounted for automatically via DEV_MAC_TAGS_CFG.
+ * In the special case that it's the NPI port that we're configuring, the
+ * length of the tag and optional prefix needs to be accounted for privately,
+ * in order to be able to sustain communication at the requested @sdu.
  */
-static void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu)
+void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu)
 {
 	struct ocelot_port *ocelot_port = ocelot->ports[port];
 	int maxlen = sdu + ETH_HLEN + ETH_FCS_LEN;
 	int atop_wm;
 
+	if (port == ocelot->npi) {
+		maxlen += OCELOT_TAG_LEN;
+
+		if (ocelot->inj_prefix == OCELOT_TAG_PREFIX_SHORT)
+			maxlen += OCELOT_SHORT_PREFIX_LEN;
+		else if (ocelot->inj_prefix == OCELOT_TAG_PREFIX_LONG)
+			maxlen += OCELOT_LONG_PREFIX_LEN;
+	}
+
 	ocelot_port_writel(ocelot_port, maxlen, DEV_MAC_MAXLEN_CFG);
 
 	/* Set Pause WM hysteresis
@@ -2022,6 +2034,24 @@ static void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu)
 			 SYS_ATOP, port);
 	ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG);
 }
+EXPORT_SYMBOL(ocelot_port_set_maxlen);
+
+int ocelot_get_max_mtu(struct ocelot *ocelot, int port)
+{
+	int max_mtu = 65535 - ETH_HLEN - ETH_FCS_LEN;
+
+	if (port == ocelot->npi) {
+		max_mtu -= OCELOT_TAG_LEN;
+
+		if (ocelot->inj_prefix == OCELOT_TAG_PREFIX_SHORT)
+			max_mtu -= OCELOT_SHORT_PREFIX_LEN;
+		else if (ocelot->inj_prefix == OCELOT_TAG_PREFIX_LONG)
+			max_mtu -= OCELOT_LONG_PREFIX_LEN;
+	}
+
+	return max_mtu;
+}
+EXPORT_SYMBOL(ocelot_get_max_mtu);
 
 void ocelot_init_port(struct ocelot *ocelot, int port)
 {
@@ -2131,6 +2161,10 @@ void ocelot_configure_cpu(struct ocelot *ocelot, int npi,
 {
 	int cpu = ocelot->num_phys_ports;
 
+	ocelot->npi = npi;
+	ocelot->inj_prefix = injection;
+	ocelot->xtr_prefix = extraction;
+
 	/* The unicast destination PGID for the CPU port module is unused */
 	ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, cpu);
 	/* Instead set up a multicast destination PGID for traffic copied to
@@ -2143,19 +2177,10 @@ void ocelot_configure_cpu(struct ocelot *ocelot, int npi,
 			 ANA_PORT_PORT_CFG, cpu);
 
 	if (npi >= 0 && npi < ocelot->num_phys_ports) {
-		int sdu = ETH_DATA_LEN + OCELOT_TAG_LEN;
-
 		ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M |
 			     QSYS_EXT_CPU_CFG_EXT_CPU_PORT(npi),
 			     QSYS_EXT_CPU_CFG);
 
-		if (injection == OCELOT_TAG_PREFIX_SHORT)
-			sdu += OCELOT_SHORT_PREFIX_LEN;
-		else if (injection == OCELOT_TAG_PREFIX_LONG)
-			sdu += OCELOT_LONG_PREFIX_LEN;
-
-		ocelot_port_set_maxlen(ocelot, npi, sdu);
-
 		/* Enable NPI port */
 		ocelot_write_rix(ocelot,
 				 QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index db2fb14bd775..23a78d927838 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -522,6 +522,11 @@ struct ocelot {
 	 */
 	u8				num_phys_ports;
 
+	int				npi;
+
+	enum ocelot_tag_prefix		inj_prefix;
+	enum ocelot_tag_prefix		xtr_prefix;
+
 	u32				*lags;
 
 	struct list_head		multicast;
@@ -616,6 +621,8 @@ int ocelot_hwstamp_set(struct ocelot *ocelot, int port, struct ifreq *ifr);
 int ocelot_port_add_txtstamp_skb(struct ocelot_port *ocelot_port,
 				 struct sk_buff *skb);
 void ocelot_get_txtstamp(struct ocelot *ocelot);
+void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu);
+int ocelot_get_max_mtu(struct ocelot *ocelot, int port);
 int ocelot_cls_flower_replace(struct ocelot *ocelot, int port,
 			      struct flow_cls_offload *f, bool ingress);
 int ocelot_cls_flower_destroy(struct ocelot *ocelot, int port,
-- 
2.17.1


      parent reply	other threads:[~2020-03-26 22:41 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-26 22:40 [PATCH v3 net-next 0/8] Configure the MTU on DSA switches Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 1/8] net: phy: bcm7xx: add jumbo frame configuration to PHY Vladimir Oltean
2020-03-26 23:17   ` Florian Fainelli
2020-03-26 22:40 ` [PATCH v3 net-next 2/8] bgmac: configure MTU and add support for frames beyond 8192 byte size Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 3/8] net: dsa: configure the MTU for switch ports Vladimir Oltean
2020-03-27  0:06   ` Andrew Lunn
2020-03-27 10:00     ` Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 4/8] net: dsa: implement auto-normalization of MTU for bridge hardware datapath Vladimir Oltean
2020-04-02  1:25   ` kbuild test robot
2020-03-26 22:40 ` [PATCH v3 net-next 5/8] net: dsa: b53: add MTU configuration support Vladimir Oltean
2020-03-26 23:16   ` Florian Fainelli
2020-03-27 13:01     ` Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 6/8] net: dsa: sja1105: implement the port MTU callbacks Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 7/8] net: dsa: vsc73xx: make the MTU configurable Vladimir Oltean
2020-03-26 22:40 ` Vladimir Oltean [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200326224040.32014-9-olteanv@gmail.com \
    --to=olteanv@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=idosch@idosch.org \
    --cc=jakub.kicinski@netronome.com \
    --cc=jiri@resnulli.us \
    --cc=kuba@kernel.org \
    --cc=murali.policharla@broadcom.com \
    --cc=netdev@vger.kernel.org \
    --cc=nikolay@cumulusnetworks.com \
    --cc=stephen@networkplumber.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).