From: Horatiu Vultur <horatiu.vultur@microchip.com>
To: <davem@davemloft.net>, <jiri@resnulli.us>, <ivecera@redhat.com>,
<kuba@kernel.org>, <roopa@cumulusnetworks.com>,
<nikolay@cumulusnetworks.com>, <olteanv@gmail.com>,
<andrew@lunn.ch>, <UNGLinuxDriver@microchip.com>,
<linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>,
<bridge@lists.linux-foundation.org>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Subject: [RFC net-next v4 1/9] bridge: uapi: mrp: Add mrp attributes.
Date: Fri, 27 Mar 2020 10:21:18 +0100 [thread overview]
Message-ID: <20200327092126.15407-2-horatiu.vultur@microchip.com> (raw)
In-Reply-To: <20200327092126.15407-1-horatiu.vultur@microchip.com>
Add new nested netlink attribute to configure the MRP. These attributes are used
by the userspace to add/delete/configure MRP instances and by the kernel to
notify the userspace when the MRP ring gets open/closed. MRP nested attribute
has the following attributes:
IFLA_BRIDGE_MRP_INSTANCE - the parameter type is br_mrp_instance which contains
the instance id, and the ifindex of the two ports. The ports can't be part of
multiple instances. This is used to create/delete MRP instances.
IFLA_BRIDGE_MRP_PORT_STATE - the parameter type is u32. Which can be forwarding,
blocking or disabled.
IFLA_BRIDGE_MRP_PORT_ROLE - the parameter type is br_mrp_port_role which
contains the instance id and the role. The role can be primary or secondary.
IFLA_BRIDGE_MRP_RING_STATE - the parameter type is br_mrp_ring_state which
contains the instance id and the state. The state can be open or closed.
IFLA_BRIDGE_MRP_RING_ROLE - the parameter type is br_mrp_ring_role which
contains the instance id and the ring role. The role can be MRM or MRC.
IFLA_BRIDGE_MRP_START_TEST - the parameter type is br_mrp_start_test which
contains the instance id, the interval at which to send the MRP_Test frames,
how many test frames can be missed before declaring the ring open and the
period which represent for how long to send the test frames.
IFLA_BRIDGE_MRP_RING_OPEN - the parameter type is u32 and has a value of 1 if
the port stopped receiving test frames and a value 0 is started to receive
them. This attribut is used by the kernel to notify the userspace when the
ring gets open or closed.
Also add the file include/uapi/linux/mrp_bridge.h which defines all the types
used by MRP that are also needed by the userpace.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
include/uapi/linux/if_bridge.h | 42 +++++++++++++++++
include/uapi/linux/if_ether.h | 1 +
include/uapi/linux/mrp_bridge.h | 84 +++++++++++++++++++++++++++++++++
3 files changed, 127 insertions(+)
create mode 100644 include/uapi/linux/mrp_bridge.h
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index bfe621ea51b3..4d488e1837da 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -120,6 +120,7 @@ enum {
IFLA_BRIDGE_MODE,
IFLA_BRIDGE_VLAN_INFO,
IFLA_BRIDGE_VLAN_TUNNEL_INFO,
+ IFLA_BRIDGE_MRP,
__IFLA_BRIDGE_MAX,
};
#define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1)
@@ -157,6 +158,47 @@ struct bridge_vlan_xstats {
__u32 pad2;
};
+enum {
+ IFLA_BRIDGE_MRP_INSTANCE,
+ IFLA_BRIDGE_MRP_PORT_STATE,
+ IFLA_BRIDGE_MRP_PORT_ROLE,
+ IFLA_BRIDGE_MRP_RING_STATE,
+ IFLA_BRIDGE_MRP_RING_ROLE,
+ IFLA_BRIDGE_MRP_START_TEST,
+ IFLA_BRIDGE_MRP_RING_OPEN,
+ __IFLA_BRIDGE_MRP_MAX,
+};
+
+struct br_mrp_instance {
+ __u32 ring_id;
+ __u32 p_ifindex;
+ __u32 s_ifindex;
+};
+
+struct br_mrp_port_role {
+ __u32 ring_id;
+ __u32 role;
+};
+
+struct br_mrp_ring_state {
+ __u32 ring_id;
+ __u32 ring_state;
+};
+
+struct br_mrp_ring_role {
+ __u32 ring_id;
+ __u32 ring_role;
+};
+
+struct br_mrp_start_test {
+ __u32 ring_id;
+ __u32 interval;
+ __u32 max_miss;
+ __u32 period;
+};
+
+#define IFLA_BRIDGE_MRP_MAX (__IFLA_BRIDGE_MRP_MAX - 1)
+
struct bridge_stp_xstats {
__u64 transition_blk;
__u64 transition_fwd;
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
index f6ceb2e63d1e..d6de2b167448 100644
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -92,6 +92,7 @@
#define ETH_P_PREAUTH 0x88C7 /* 802.11 Preauthentication */
#define ETH_P_TIPC 0x88CA /* TIPC */
#define ETH_P_LLDP 0x88CC /* Link Layer Discovery Protocol */
+#define ETH_P_MRP 0x88E3 /* Media Redundancy Protocol */
#define ETH_P_MACSEC 0x88E5 /* 802.1ae MACsec */
#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */
#define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */
diff --git a/include/uapi/linux/mrp_bridge.h b/include/uapi/linux/mrp_bridge.h
new file mode 100644
index 000000000000..2600cdf5a284
--- /dev/null
+++ b/include/uapi/linux/mrp_bridge.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+
+#ifndef _UAPI_LINUX_MRP_BRIDGE_H_
+#define _UAPI_LINUX_MRP_BRIDGE_H_
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#define MRP_MAX_FRAME_LENGTH 200
+#define MRP_DEFAULT_PRIO 0x8000
+#define MRP_DOMAIN_UUID_LENGTH 16
+#define MRP_VERSION 1
+#define MRP_FRAME_PRIO 7
+
+enum br_mrp_ring_role_type {
+ BR_MRP_RING_ROLE_DISABLED,
+ BR_MRP_RING_ROLE_MRC,
+ BR_MRP_RING_ROLE_MRM,
+};
+
+enum br_mrp_ring_state_type {
+ BR_MRP_RING_STATE_OPEN,
+ BR_MRP_RING_STATE_CLOSED,
+};
+
+enum br_mrp_port_state_type {
+ BR_MRP_PORT_STATE_DISABLED,
+ BR_MRP_PORT_STATE_BLOCKED,
+ BR_MRP_PORT_STATE_FORWARDING,
+ BR_MRP_PORT_STATE_NOT_CONNECTED,
+};
+
+enum br_mrp_port_role_type {
+ BR_MRP_PORT_ROLE_PRIMARY,
+ BR_MRP_PORT_ROLE_SECONDARY,
+ BR_MRP_PORT_ROLE_NONE,
+};
+
+enum br_mrp_tlv_header_type {
+ BR_MRP_TLV_HEADER_END = 0x0,
+ BR_MRP_TLV_HEADER_COMMON = 0x1,
+ BR_MRP_TLV_HEADER_RING_TEST = 0x2,
+ BR_MRP_TLV_HEADER_RING_TOPO = 0x3,
+ BR_MRP_TLV_HEADER_RING_LINK_DOWN = 0x4,
+ BR_MRP_TLV_HEADER_RING_LINK_UP = 0x5,
+};
+
+struct br_mrp_tlv_hdr {
+ __u8 type;
+ __u8 length;
+};
+
+struct br_mrp_end_hdr {
+ struct br_mrp_tlv_hdr hdr;
+};
+
+struct br_mrp_common_hdr {
+ __u16 seq_id;
+ __u8 domain[MRP_DOMAIN_UUID_LENGTH];
+};
+
+struct br_mrp_ring_test_hdr {
+ __u16 prio;
+ __u8 sa[ETH_ALEN];
+ __u16 port_role;
+ __u16 state;
+ __u16 transitions;
+ __u32 timestamp;
+};
+
+struct br_mrp_ring_topo_hdr {
+ __u16 prio;
+ __u8 sa[ETH_ALEN];
+ __u16 interval;
+};
+
+struct br_mrp_ring_link_hdr {
+ __u8 sa[ETH_ALEN];
+ __u16 port_role;
+ __u16 interval;
+ __u16 blocked;
+};
+
+#endif
--
2.17.1
next prev parent reply other threads:[~2020-03-27 9:22 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-27 9:21 [RFC net-next v4 0/9] net: bridge: mrp: Add support for Media Redundancy Protocol(MRP) Horatiu Vultur
2020-03-27 9:21 ` Horatiu Vultur [this message]
2020-03-27 9:21 ` [RFC net-next v4 2/9] bridge: mrp: Expose function br_mrp_port_open Horatiu Vultur
2020-03-27 9:21 ` [RFC net-next v4 3/9] bridge: mrp: Add MRP interface Horatiu Vultur
2020-03-27 9:21 ` [RFC net-next v4 4/9] bridge: mrp: Implement netlink interface to configure MRP Horatiu Vultur
2020-03-30 15:30 ` Nikolay Aleksandrov
2020-04-01 15:39 ` Horatiu Vultur
2020-03-27 9:21 ` [RFC net-next v4 5/9] switchdev: mrp: Extend switchdev API to offload MRP Horatiu Vultur
2020-03-27 9:21 ` [RFC net-next v4 6/9] bridge: switchdev: mrp Implement MRP API for switchdev Horatiu Vultur
2020-03-27 9:21 ` [RFC net-next v4 7/9] bridge: mrp: Connect MRP api with the switchev API Horatiu Vultur
2020-03-30 16:11 ` Nikolay Aleksandrov
2020-04-01 16:06 ` Horatiu Vultur
2020-04-01 16:32 ` Nikolay Aleksandrov
2020-04-02 14:18 ` Horatiu Vultur
2020-04-02 14:29 ` Nikolay Aleksandrov
2020-04-02 18:14 ` Horatiu Vultur
2020-03-27 9:21 ` [RFC net-next v4 8/9] bridge: mrp: Integrate MRP into the bridge Horatiu Vultur
2020-03-30 16:16 ` Nikolay Aleksandrov
2020-04-01 16:10 ` Horatiu Vultur
2020-04-01 16:33 ` Nikolay Aleksandrov
2020-04-02 13:46 ` Horatiu Vultur
2020-03-27 9:21 ` [RFC net-next v4 9/9] bridge: mrp: Update Kconfig and Makefile Horatiu Vultur
2020-03-30 16:21 ` [RFC net-next v4 0/9] net: bridge: mrp: Add support for Media Redundancy Protocol(MRP) Nikolay Aleksandrov
2020-04-01 16:12 ` Horatiu Vultur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200327092126.15407-2-horatiu.vultur@microchip.com \
--to=horatiu.vultur@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=ivecera@redhat.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nikolay@cumulusnetworks.com \
--cc=olteanv@gmail.com \
--cc=roopa@cumulusnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).