From: Andrew Lunn <andrew@lunn.ch>
To: David Miller <davem@davemloft.net>
Cc: netdev <netdev@vger.kernel.org>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
Chris Healy <cphealy@gmail.com>,
Michal Kubecek <mkubecek@suse.cz>, Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH net-next v1 4/9] net: ethtool: Add attributes for cable test reports
Date: Sat, 25 Apr 2020 20:06:16 +0200 [thread overview]
Message-ID: <20200425180621.1140452-5-andrew@lunn.ch> (raw)
In-Reply-To: <20200425180621.1140452-1-andrew@lunn.ch>
Add the attributes needed to report cable test results to userspace.
The reports are expected to be per twisted pair. A nested property per
pair can report the result of the cable test. A nested property can
also report the length of the cable to any fault.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
Documentation/networking/ethtool-netlink.rst | 35 +++++++++++++++
include/uapi/linux/ethtool_netlink.h | 47 +++++++++++++++++++-
2 files changed, 81 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 0c354567e991..89fd321b0e29 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -967,6 +967,41 @@ Request contents:
``ETHTOOL_A_CABLE_TEST_HEADER`` nested request header
==================================== ====== ==========================
+Notify contents:
+
+An Ethernet cable typically contains 1, 2 or 4 pairs. The length of
+the pair can only be measured when there is a fault in the pair and
+hence a reflection. Information about the fault may not be available,
+depends on the specific hardware. Hence the contents of the notify
+message is mostly optional. The attributes can be repeated an
+arbitrary number of times, in an arbitrary order, for an arbitrary
+number of pairs.
+
+The example shows a T2 cable, i.e. two pairs. One pair is O.K, and
+hence has no length information. The second pair has a fault and does
+have length information.
+
+ +-------------------------------------------+--------+-----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_HEADER`` | nested | reply header |
+ +-------------------------------------------+--------+-----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_NTF_RESULT`` | nested | cable test result |
+ +-+-----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
+ +-+-----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code |
+ +-+-----------------------------------------+--------+-----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_NTF_RESULT`` | nested | cable test results |
+ +-+-----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
+ +-+-----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code |
+ +-+-----------------------------------------+--------+-----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_NTF_FAULT_LENGTH`` | nested | cable length |
+ +-+-----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR`` | u8 | pair number |
+ +-+-----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_CM`` | u8 | length in cm |
+ +-+-----------------------------------------+--------+-----------------------+
Request translation
===================
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 598d0b502ebd..05ef5048e4fc 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -76,6 +76,7 @@ enum {
ETHTOOL_MSG_EEE_NTF,
ETHTOOL_MSG_TSINFO_GET_REPLY,
ETHTOOL_MSG_CABLE_TEST_ACT_REPLY,
+ ETHTOOL_MSG_CABLE_TEST_NTF,
/* add new constants above here */
__ETHTOOL_MSG_KERNEL_CNT,
@@ -403,7 +404,6 @@ enum {
/* add new constants above here */
__ETHTOOL_A_TSINFO_CNT,
ETHTOOL_A_TSINFO_MAX = (__ETHTOOL_A_TSINFO_CNT - 1)
-
};
/* CABLE TEST */
@@ -417,6 +417,51 @@ enum {
ETHTOOL_A_CABLE_TEST_MAX = __ETHTOOL_A_CABLE_TEST_CNT - 1
};
+/* CABLE TEST NOTIFY */
+enum {
+ ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC,
+ ETHTOOL_A_CABLE_RESULT_CODE_OK,
+ ETHTOOL_A_CABLE_RESULT_CODE_OPEN,
+ ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT,
+ ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT,
+};
+
+enum {
+ ETHTOOL_A_CABLE_PAIR_0,
+ ETHTOOL_A_CABLE_PAIR_1,
+ ETHTOOL_A_CABLE_PAIR_2,
+ ETHTOOL_A_CABLE_PAIR_3,
+};
+
+enum {
+ ETHTOOL_A_CABLE_RESULT_UNSPEC,
+ ETHTOOL_A_CABLE_RESULT_PAIR, /* u8 ETHTOOL_A_CABLE_PAIR_ */
+ ETHTOOL_A_CABLE_RESULT_CODE, /* u8 ETHTOOL_A_CABLE_RESULT_CODE_ */
+
+ __ETHTOOL_A_CABLE_RESULT_CNT,
+ ETHTOOL_A_CABLE_RESULT_MAX = (__ETHTOOL_A_CABLE_RESULT_CNT - 1)
+};
+
+enum {
+ ETHTOOL_A_CABLE_FAULT_LENGTH_UNSPEC,
+ ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR, /* u8 ETHTOOL_A_CABLE_PAIR_ */
+ ETHTOOL_A_CABLE_FAULT_LENGTH_CM, /* u16 */
+
+ __ETHTOOL_A_CABLE_FAULT_LENGTH_CNT,
+ ETHTOOL_A_CABLE_FAULT_LENGTH_MAX = (__ETHTOOL_A_CABLE_FAULT_LENGTH_CNT - 1)
+};
+
+enum {
+ ETHTOOL_A_CABLE_TEST_NTF_UNSPEC,
+ ETHTOOL_A_CABLE_TEST_NTF_DEV, /* nest - ETHTOOL_A_DEV_* */
+ ETHTOOL_A_CABLE_TEST_NTF_NEST, /* nest - of results: */
+ ETHTOOL_A_CABLE_TEST_NTF_RESULT, /* nest - ETHTOOL_A_CABLE_RESULT_ */
+ ETHTOOL_A_CABLE_TEST_NTF_FAULT_LENGTH, /* nest - ETHTOOL_A_CABLE_FAULT_LENGTH_ */
+
+ __ETHTOOL_A_CABLE_TEST_NTF_CNT,
+ ETHTOOL_A_CABLE_TEST_NTF_MAX = (__ETHTOOL_A_CABLE_TEST_NTF_CNT - 1)
+};
+
/* generic netlink info */
#define ETHTOOL_GENL_NAME "ethtool"
#define ETHTOOL_GENL_VERSION 1
--
2.26.1
next prev parent reply other threads:[~2020-04-25 18:06 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-25 18:06 [PATCH net-next v1 0/9] Ethernet Cable test support Andrew Lunn
2020-04-25 18:06 ` [PATCH net-next v1 1/9] net: phy: Add cable test support to state machine Andrew Lunn
2020-04-26 19:46 ` Michal Kubecek
2020-04-26 20:31 ` Andrew Lunn
2020-04-26 21:22 ` Florian Fainelli
2020-04-25 18:06 ` [PATCH net-next v1 2/9] net: phy: Add support for polling cable test Andrew Lunn
2020-04-25 19:49 ` Florian Fainelli
2020-04-25 20:10 ` Andrew Lunn
2020-04-26 21:19 ` Florian Fainelli
2020-04-26 22:07 ` Andrew Lunn
2020-04-25 18:06 ` [PATCH net-next v1 3/9] net: ethtool: netlink: Add support for triggering a " Andrew Lunn
2020-04-26 19:36 ` Michal Kubecek
2020-04-26 20:38 ` Andrew Lunn
2020-04-26 20:50 ` Michal Kubecek
2020-04-25 18:06 ` Andrew Lunn [this message]
2020-04-25 20:00 ` [PATCH net-next v1 4/9] net: ethtool: Add attributes for cable test reports Randy Dunlap
2020-04-26 20:25 ` Michal Kubecek
2020-04-26 21:12 ` Andrew Lunn
2020-04-27 7:13 ` Michal Kubecek
2020-04-29 16:16 ` Michael Walle
2020-04-29 18:57 ` Andrew Lunn
2020-04-29 18:58 ` Florian Fainelli
2020-04-29 19:32 ` Michael Walle
2020-04-25 18:06 ` [PATCH net-next v1 5/9] net: ethtool: Make helpers public Andrew Lunn
2020-04-25 18:06 ` [PATCH net-next v1 6/9] net: ethtool: Add infrastructure for reporting cable test results Andrew Lunn
2020-04-25 18:06 ` [PATCH net-next v1 7/9] net: ethtool: Add helpers for reporting " Andrew Lunn
2020-04-25 18:06 ` [PATCH net-next v1 8/9] net: phy: marvell: Add cable test support Andrew Lunn
2020-04-25 18:06 ` [PATCH net-next v1 9/9] net: phy: Put interface into oper testing during cable test Andrew Lunn
2020-04-29 16:02 ` [PATCH net-next v1 0/9] Ethernet Cable test support Michael Walle
2020-04-29 16:32 ` Andrew Lunn
2020-04-30 17:48 ` Michael Walle
2020-04-30 18:23 ` Andrew Lunn
2020-04-30 19:44 ` Michael Walle
2020-04-30 20:51 ` Andrew Lunn
2020-04-30 18:34 ` Florian Fainelli
2020-04-30 19:31 ` Michael Walle
2020-04-30 19:38 ` Florian Fainelli
2020-04-30 19:52 ` Michael Walle
2020-04-30 19:41 ` Andrew Lunn
2020-04-30 20:01 ` Michael Walle
2020-04-30 20:56 ` Andrew Lunn
2020-04-30 20:04 ` Florian Fainelli
2020-04-30 20:13 ` Michael Walle
2020-04-30 20:19 ` Florian Fainelli
2020-04-30 21:16 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200425180621.1140452-5-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=cphealy@gmail.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=mkubecek@suse.cz \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).