netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Antoine Tenart <antoine.tenart@bootlin.com>
To: davem@davemloft.net, andrew@lunn.ch, f.fainelli@gmail.com,
	hkallweit1@gmail.com
Cc: Antoine Tenart <antoine.tenart@bootlin.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net v2] net: phy: mscc: fix initialization of the MACsec protocol mode
Date: Fri, 22 May 2020 17:55:45 +0200	[thread overview]
Message-ID: <20200522155545.881263-1-antoine.tenart@bootlin.com> (raw)

At the very end of the MACsec block initialization in the MSCC PHY
driver, the MACsec "protocol mode" is set. This setting should be set
based on the PHY id within the package, as the bank used to access the
register used depends on this. This was not done correctly, and only the
first bank was used leading to the two upper PHYs being unstable when
using the VSC8584. This patch fixes it.

Fixes: 1bbe0ecc2a1a ("net: phy: mscc: macsec initialization")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---

Since v1:
  - Resent to net.

 drivers/net/phy/mscc/mscc.h        |  2 ++
 drivers/net/phy/mscc/mscc_mac.h    |  6 +++---
 drivers/net/phy/mscc/mscc_macsec.c | 16 ++++++++++------
 drivers/net/phy/mscc/mscc_macsec.h |  3 ++-
 drivers/net/phy/mscc/mscc_main.c   |  4 ++++
 5 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h
index 030bf8b600df..414e3b31bb1f 100644
--- a/drivers/net/phy/mscc/mscc.h
+++ b/drivers/net/phy/mscc/mscc.h
@@ -354,6 +354,8 @@ struct vsc8531_private {
 	u64 *stats;
 	int nstats;
 	bool pkg_init;
+	/* PHY address within the package. */
+	u8 addr;
 	/* For multiple port PHYs; the MDIO address of the base PHY in the
 	 * package.
 	 */
diff --git a/drivers/net/phy/mscc/mscc_mac.h b/drivers/net/phy/mscc/mscc_mac.h
index fcb5ba5e5d03..59b6837c60b3 100644
--- a/drivers/net/phy/mscc/mscc_mac.h
+++ b/drivers/net/phy/mscc/mscc_mac.h
@@ -152,8 +152,8 @@
 #define MSCC_MAC_PAUSE_CFG_STATE_PAUSE_STATE			BIT(0)
 #define MSCC_MAC_PAUSE_CFG_STATE_MAC_TX_PAUSE_GEN		BIT(4)
 
-#define MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL			0x2
-#define MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE(x)	(x)
-#define MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE_M	GENMASK(2, 0)
+#define MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL			0x2
+#define MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE(x)	(x)
+#define MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE_M	GENMASK(2, 0)
 
 #endif /* _MSCC_PHY_LINE_MAC_H_ */
diff --git a/drivers/net/phy/mscc/mscc_macsec.c b/drivers/net/phy/mscc/mscc_macsec.c
index e99e2cd72a0c..b4d3dc4068e2 100644
--- a/drivers/net/phy/mscc/mscc_macsec.c
+++ b/drivers/net/phy/mscc/mscc_macsec.c
@@ -316,6 +316,8 @@ static void vsc8584_macsec_mac_init(struct phy_device *phydev,
 /* Must be called with mdio_lock taken */
 static int __vsc8584_macsec_init(struct phy_device *phydev)
 {
+	struct vsc8531_private *priv = phydev->priv;
+	enum macsec_bank proc_bank;
 	u32 val;
 
 	vsc8584_macsec_block_init(phydev, MACSEC_INGR);
@@ -351,12 +353,14 @@ static int __vsc8584_macsec_init(struct phy_device *phydev)
 	val |= MSCC_FCBUF_ENA_CFG_TX_ENA | MSCC_FCBUF_ENA_CFG_RX_ENA;
 	vsc8584_macsec_phy_write(phydev, FC_BUFFER, MSCC_FCBUF_ENA_CFG, val);
 
-	val = vsc8584_macsec_phy_read(phydev, IP_1588,
-				      MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL);
-	val &= ~MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE_M;
-	val |= MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE(4);
-	vsc8584_macsec_phy_write(phydev, IP_1588,
-				 MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL, val);
+	proc_bank = (priv->addr < 2) ? PROC_0 : PROC_2;
+
+	val = vsc8584_macsec_phy_read(phydev, proc_bank,
+				      MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL);
+	val &= ~MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE_M;
+	val |= MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE(4);
+	vsc8584_macsec_phy_write(phydev, proc_bank,
+				 MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL, val);
 
 	return 0;
 }
diff --git a/drivers/net/phy/mscc/mscc_macsec.h b/drivers/net/phy/mscc/mscc_macsec.h
index d0783944d106..d751f2946b79 100644
--- a/drivers/net/phy/mscc/mscc_macsec.h
+++ b/drivers/net/phy/mscc/mscc_macsec.h
@@ -64,7 +64,8 @@ enum macsec_bank {
 	FC_BUFFER   = 0x04,
 	HOST_MAC    = 0x05,
 	LINE_MAC    = 0x06,
-	IP_1588     = 0x0e,
+	PROC_0      = 0x0e,
+	PROC_2      = 0x0f,
 	MACSEC_INGR = 0x38,
 	MACSEC_EGR  = 0x3c,
 };
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index acddef79f4e8..c8aa6d905d8e 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -1347,6 +1347,8 @@ static int vsc8584_config_init(struct phy_device *phydev)
 	else
 		vsc8531->base_addr = phydev->mdio.addr - addr;
 
+	vsc8531->addr = addr;
+
 	/* Some parts of the init sequence are identical for every PHY in the
 	 * package. Some parts are modifying the GPIO register bank which is a
 	 * set of registers that are affecting all PHYs, a few resetting the
@@ -1771,6 +1773,8 @@ static int vsc8514_config_init(struct phy_device *phydev)
 	else
 		vsc8531->base_addr = phydev->mdio.addr - addr;
 
+	vsc8531->addr = addr;
+
 	/* Some parts of the init sequence are identical for every PHY in the
 	 * package. Some parts are modifying the GPIO register bank which is a
 	 * set of registers that are affecting all PHYs, a few resetting the
-- 
2.26.2


             reply	other threads:[~2020-05-22 15:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-22 15:55 Antoine Tenart [this message]
2020-05-23 23:33 ` [PATCH net v2] net: phy: mscc: fix initialization of the MACsec protocol mode David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200522155545.881263-1-antoine.tenart@bootlin.com \
    --to=antoine.tenart@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).