From: "Ooi, Joyce" <joyce.ooi@intel.com>
To: Thor Thayer <thor.thayer@linux.intel.com>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Dalon Westergreen <dalon.westergreen@linux.intel.com>,
Joyce Ooi <joyce.ooi@intel.com>,
Tan Ley Foon <ley.foon.tan@intel.com>,
See Chin Liang <chin.liang.see@intel.com>,
Dinh Nguyen <dinh.nguyen@intel.com>,
Dalon Westergreen <dalon.westergreen@intel.com>
Subject: [PATCH v3 05/10] net: eth: altera: Move common functions to altera_utils
Date: Thu, 4 Jun 2020 15:32:51 +0800 [thread overview]
Message-ID: <20200604073256.25702-6-joyce.ooi@intel.com> (raw)
In-Reply-To: <20200604073256.25702-1-joyce.ooi@intel.com>
From: Dalon Westergreen <dalon.westergreen@intel.com>
Move request_and_map and other shared functions to altera_utils. This
is the first step to moving common code out of tse specific code so
that it can be shared with future altera ethernet ip.
Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Signed-off-by: Joyce Ooi <joyce.ooi@intel.com>
---
v2: no change
v3: no change
---
drivers/net/ethernet/altera/altera_tse.h | 45 ---------------------
drivers/net/ethernet/altera/altera_tse_ethtool.c | 1 +
drivers/net/ethernet/altera/altera_tse_main.c | 32 +--------------
drivers/net/ethernet/altera/altera_utils.c | 29 ++++++++++++++
drivers/net/ethernet/altera/altera_utils.h | 51 ++++++++++++++++++++++++
5 files changed, 82 insertions(+), 76 deletions(-)
diff --git a/drivers/net/ethernet/altera/altera_tse.h b/drivers/net/ethernet/altera/altera_tse.h
index 26c5541fda27..fa24ab3c7d6a 100644
--- a/drivers/net/ethernet/altera/altera_tse.h
+++ b/drivers/net/ethernet/altera/altera_tse.h
@@ -489,49 +489,4 @@ struct altera_tse_private {
*/
void altera_tse_set_ethtool_ops(struct net_device *);
-static inline
-u32 csrrd32(void __iomem *mac, size_t offs)
-{
- void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
- return readl(paddr);
-}
-
-static inline
-u16 csrrd16(void __iomem *mac, size_t offs)
-{
- void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
- return readw(paddr);
-}
-
-static inline
-u8 csrrd8(void __iomem *mac, size_t offs)
-{
- void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
- return readb(paddr);
-}
-
-static inline
-void csrwr32(u32 val, void __iomem *mac, size_t offs)
-{
- void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
-
- writel(val, paddr);
-}
-
-static inline
-void csrwr16(u16 val, void __iomem *mac, size_t offs)
-{
- void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
-
- writew(val, paddr);
-}
-
-static inline
-void csrwr8(u8 val, void __iomem *mac, size_t offs)
-{
- void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
-
- writeb(val, paddr);
-}
-
#endif /* __ALTERA_TSE_H__ */
diff --git a/drivers/net/ethernet/altera/altera_tse_ethtool.c b/drivers/net/ethernet/altera/altera_tse_ethtool.c
index 4299f1301149..420d77f00eab 100644
--- a/drivers/net/ethernet/altera/altera_tse_ethtool.c
+++ b/drivers/net/ethernet/altera/altera_tse_ethtool.c
@@ -22,6 +22,7 @@
#include <linux/phy.h>
#include "altera_tse.h"
+#include "altera_utils.h"
#define TSE_STATS_LEN 31
#define TSE_NUM_REGS 128
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index 3c756afd0d39..87f789e42b6e 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -23,7 +23,6 @@
#include <linux/if_vlan.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
@@ -33,7 +32,7 @@
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
-#include <linux/platform_device.h>
+#include <linux/ptp_classify.h>
#include <linux/skbuff.h>
#include <asm/cacheflush.h>
@@ -1320,35 +1319,6 @@ static struct net_device_ops altera_tse_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-static int request_and_map(struct platform_device *pdev, const char *name,
- struct resource **res, void __iomem **ptr)
-{
- struct resource *region;
- struct device *device = &pdev->dev;
-
- *res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
- if (*res == NULL) {
- dev_err(device, "resource %s not defined\n", name);
- return -ENODEV;
- }
-
- region = devm_request_mem_region(device, (*res)->start,
- resource_size(*res), dev_name(device));
- if (region == NULL) {
- dev_err(device, "unable to request %s\n", name);
- return -EBUSY;
- }
-
- *ptr = devm_ioremap(device, region->start,
- resource_size(region));
- if (*ptr == NULL) {
- dev_err(device, "ioremap of %s failed!", name);
- return -ENOMEM;
- }
-
- return 0;
-}
-
/* Probe Altera TSE MAC device
*/
static int altera_tse_probe(struct platform_device *pdev)
diff --git a/drivers/net/ethernet/altera/altera_utils.c b/drivers/net/ethernet/altera/altera_utils.c
index e6a7fc9d8fb1..c9bc7d0ea02a 100644
--- a/drivers/net/ethernet/altera/altera_utils.c
+++ b/drivers/net/ethernet/altera/altera_utils.c
@@ -31,3 +31,32 @@ int tse_bit_is_clear(void __iomem *ioaddr, size_t offs, u32 bit_mask)
u32 value = csrrd32(ioaddr, offs);
return (value & bit_mask) ? 0 : 1;
}
+
+int request_and_map(struct platform_device *pdev, const char *name,
+ struct resource **res, void __iomem **ptr)
+{
+ struct resource *region;
+ struct device *device = &pdev->dev;
+
+ *res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
+ if (!*res) {
+ dev_err(device, "resource %s not defined\n", name);
+ return -ENODEV;
+ }
+
+ region = devm_request_mem_region(device, (*res)->start,
+ resource_size(*res), dev_name(device));
+ if (!region) {
+ dev_err(device, "unable to request %s\n", name);
+ return -EBUSY;
+ }
+
+ *ptr = devm_ioremap(device, region->start,
+ resource_size(region));
+ if (!*ptr) {
+ dev_err(device, "ioremap of %s failed!", name);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/altera/altera_utils.h b/drivers/net/ethernet/altera/altera_utils.h
index b7d772f2dcbb..fbe985099a44 100644
--- a/drivers/net/ethernet/altera/altera_utils.h
+++ b/drivers/net/ethernet/altera/altera_utils.h
@@ -3,7 +3,9 @@
* Copyright (C) 2014 Altera Corporation. All rights reserved
*/
+#include <linux/platform_device.h>
#include <linux/kernel.h>
+#include <linux/io.h>
#ifndef __ALTERA_UTILS_H__
#define __ALTERA_UTILS_H__
@@ -12,5 +14,54 @@ void tse_set_bit(void __iomem *ioaddr, size_t offs, u32 bit_mask);
void tse_clear_bit(void __iomem *ioaddr, size_t offs, u32 bit_mask);
int tse_bit_is_set(void __iomem *ioaddr, size_t offs, u32 bit_mask);
int tse_bit_is_clear(void __iomem *ioaddr, size_t offs, u32 bit_mask);
+int request_and_map(struct platform_device *pdev, const char *name,
+ struct resource **res, void __iomem **ptr);
+static inline
+u32 csrrd32(void __iomem *mac, size_t offs)
+{
+ void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
+
+ return readl(paddr);
+}
+
+static inline
+u16 csrrd16(void __iomem *mac, size_t offs)
+{
+ void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
+
+ return readw(paddr);
+}
+
+static inline
+u8 csrrd8(void __iomem *mac, size_t offs)
+{
+ void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
+
+ return readb(paddr);
+}
+
+static inline
+void csrwr32(u32 val, void __iomem *mac, size_t offs)
+{
+ void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
+
+ writel(val, paddr);
+}
+
+static inline
+void csrwr16(u16 val, void __iomem *mac, size_t offs)
+{
+ void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
+
+ writew(val, paddr);
+}
+
+static inline
+void csrwr8(u8 val, void __iomem *mac, size_t offs)
+{
+ void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs);
+
+ writeb(val, paddr);
+}
#endif /* __ALTERA_UTILS_H__*/
--
2.13.0
next prev parent reply other threads:[~2020-06-04 7:34 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-04 7:32 [PATCH v3 00/10] net: eth: altera: tse: Add PTP and mSGDMA prefetcher Ooi, Joyce
2020-06-04 7:32 ` [PATCH v3 01/10] net: eth: altera: tse_start_xmit ignores tx_buffer call response Ooi, Joyce
2020-06-04 7:32 ` [PATCH v3 02/10] net: eth: altera: set rx and tx ring size before init_dma call Ooi, Joyce
2020-06-04 7:32 ` [PATCH v3 03/10] net: eth: altera: fix altera_dmaops declaration Ooi, Joyce
2020-06-04 7:32 ` [PATCH v3 04/10] net: eth: altera: add optional function to start tx dma Ooi, Joyce
2020-06-04 7:32 ` Ooi, Joyce [this message]
2020-06-04 7:32 ` [PATCH v3 06/10] net: eth: altera: Add missing identifier names to function declarations Ooi, Joyce
2020-06-04 7:32 ` [PATCH v3 07/10] net: eth: altera: change tx functions to type netdev_tx_t Ooi, Joyce
2020-06-04 7:32 ` [PATCH v3 08/10] net: eth: altera: add support for ptp and timestamping Ooi, Joyce
2020-06-04 7:32 ` [PATCH v3 09/10] net: eth: altera: add msgdma prefetcher Ooi, Joyce
2020-06-04 11:02 ` kernel test robot
2020-06-04 22:16 ` kernel test robot
2020-06-04 7:32 ` [PATCH v3 10/10] net: eth: altera: update devicetree bindings documentation Ooi, Joyce
2020-06-04 22:23 ` Rob Herring
2020-06-05 6:36 ` Ooi, Joyce
2020-06-04 22:00 ` [PATCH v3 00/10] net: eth: altera: tse: Add PTP and mSGDMA prefetcher David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200604073256.25702-6-joyce.ooi@intel.com \
--to=joyce.ooi@intel.com \
--cc=chin.liang.see@intel.com \
--cc=dalon.westergreen@intel.com \
--cc=dalon.westergreen@linux.intel.com \
--cc=davem@davemloft.net \
--cc=dinh.nguyen@intel.com \
--cc=kuba@kernel.org \
--cc=ley.foon.tan@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=thor.thayer@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).