From: Jonathan McDowell <noodles@earth.li>
To: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
David Miller <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Matthew Hagan <mnhagan88@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH] net: dsa: qca8k: Add 802.1q VLAN support
Date: Wed, 22 Jul 2020 20:33:36 +0100 [thread overview]
Message-ID: <20200722193336.GL23489@earth.li> (raw)
In-Reply-To: <20200721204818.GB1551@shell.armlinux.org.uk>
On Tue, Jul 21, 2020 at 09:48:18PM +0100, Russell King - ARM Linux admin wrote:
> On Tue, Jul 21, 2020 at 06:16:24PM +0100, Jonathan McDowell wrote:
> > This adds full 802.1q VLAN support to the qca8k, allowing the use of
> > vlan_filtering and more complicated bridging setups than allowed by
> > basic port VLAN support.
> >
> > Tested with a number of untagged ports with separate VLANs and then a
> > trunk port with all the VLANs tagged on it.
> >
> > Signed-off-by: Jonathan McDowell <noodles@earth.li>
> >
> > diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> > index a5566de82853..cce05493075f 100644
> > --- a/drivers/net/dsa/qca8k.c
> > +++ b/drivers/net/dsa/qca8k.c
> > @@ -408,6 +408,104 @@ qca8k_fdb_flush(struct qca8k_priv *priv)
> > mutex_unlock(&priv->reg_mutex);
> > }
> >
> > +static int
> > +qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid)
> > +{
> > + u32 reg;
> > +
> > + /* Set the command and VLAN index */
> > + reg = QCA8K_VTU_FUNC1_BUSY;
> > + reg |= cmd;
> > + reg |= vid << QCA8K_VTU_FUNC1_VID_S;
> > +
> > + /* Write the function register triggering the table access */
> > + qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg);
> > +
> > + /* wait for completion */
> > + if (qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY))
> > + return -1;
>
> You return -1 here. Personally, I don't like this in the kernel, as
> convention is for functions returning "int" to return negative errno
> values, and this risks returning -1 (-EPERM) being returned to userspace
> if someone decides to propagate the "error code".
Reasonable. I based this code off the qca8k_fdb_access code, but I'll
switch over to more sensible returns (and clean the fdb stuff up in a
separate patch).
> > +
> > + /* Check for table full violation when adding an entry */
> > + if (cmd == QCA8K_VLAN_LOAD) {
> > + reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC1);
> > + if (reg & QCA8K_VTU_FUNC1_FULL)
> > + return -1;
>
> ... and here.
>
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +qca8k_vlan_add(struct qca8k_priv *priv, u8 port, u16 vid, bool tagged)
> > +{
> > + u32 reg;
> > + int ret;
> > +
> > + if (!vid)
> > + return -EOPNOTSUPP;
>
> Have you checked whether this can be called with vid=0 ?
It's called at startup with VID 0 (part of setting up the HW filter
according to the log message?) and the hardware isn't happy with that.
...
> > +
> > +static int
> > +qca8k_port_vlan_prepare(struct dsa_switch *ds, int port,
> > + const struct switchdev_obj_port_vlan *vlan)
> > +{
> > + if (!vlan->vid_begin)
> > + return -EOPNOTSUPP;
> > +
> > + return 0;
> > +}
> > +
> > +static void
> > +qca8k_port_vlan_add(struct dsa_switch *ds, int port,
> > + const struct switchdev_obj_port_vlan *vlan)
> > +{
> > + struct qca8k_priv *priv = ds->priv;
> > + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
> > + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
> > + u16 vid;
> > +
> > + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid)
> > + qca8k_vlan_add(priv, port, vid, !untagged);
>
> The and ignored here, so is there any point qca8k_vlan_add() returning
> an error? If it fails, we'll never know... there even seems to be no
> diagnostic gets logged in the kernel message log.
>
> If you decide to add some logging, be careful how you do it - userspace
> could ask for vids 1..4095 to be added, and we wouldn't want the
> possibility of 4094 error messages.
>
> Another issue may be the time taken to process 4094 VIDs if
> qca8k_busy_wait() has to wait for every one.
I'll add a break out on error (and a dev_err) for this and the del case
in v2.
J.
--
Hell is other people. | .''`. Debian GNU/Linux Developer
| : :' : Happy to accept PGP signed
| `. `' or encrypted mail - RSA
| `- key on the keyservers.
next prev parent reply other threads:[~2020-07-22 19:33 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-21 17:16 [RFC PATCH] net: dsa: qca8k: Add 802.1q VLAN support Jonathan McDowell
2020-07-21 17:26 ` Florian Fainelli
2020-07-22 19:38 ` Jonathan McDowell
2020-07-22 22:36 ` Florian Fainelli
2020-07-22 22:58 ` Vladimir Oltean
2020-07-25 17:35 ` Jonathan McDowell
2020-07-21 20:48 ` Russell King - ARM Linux admin
2020-07-22 19:33 ` Jonathan McDowell [this message]
2020-07-26 14:56 ` [PATCH net-next v2] " Jonathan McDowell
2020-07-28 16:34 ` Vladimir Oltean
2020-07-30 10:40 ` Jonathan McDowell
2020-07-30 21:10 ` Vladimir Oltean
2020-08-01 17:05 ` [PATCH net-next v3 1/2] net: dsa: qca8k: Add define for port VID Jonathan McDowell
2020-08-01 20:48 ` Florian Fainelli
2020-08-02 13:21 ` Vladimir Oltean
2020-08-03 22:45 ` David Miller
2020-08-01 17:06 ` [PATCH net-next v3 2/2] net: dsa: qca8k: Add 802.1q VLAN support Jonathan McDowell
2020-08-01 20:50 ` Florian Fainelli
2020-08-02 13:21 ` Vladimir Oltean
2020-08-03 22:46 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200722193336.GL23489@earth.li \
--to=noodles@earth.li \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mnhagan88@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).