netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>,
	netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
	jeffrey.t.kirsher@intel.com, anthony.l.nguyen@intel.com,
	Andrew Bowers <andrewx.bowers@intel.com>
Subject: [net-next 04/12] ixgbevf: use generic power management
Date: Thu, 30 Jul 2020 13:37:12 -0700	[thread overview]
Message-ID: <20200730203720.3843018-5-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20200730203720.3843018-1-anthony.l.nguyen@intel.com>

From: Vaibhav Gupta <vaibhavgupta40@gmail.com>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

The driver was invoking PCI helper functions like pci_save/restore_state(),
and pci_enable/disable_device(), which is not recommended.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 .../net/ethernet/intel/ixgbevf/ixgbevf_main.c | 44 +++++--------------
 1 file changed, 10 insertions(+), 34 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 6e9a397db583..c3d26cc0cf51 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -4297,13 +4297,10 @@ static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu)
 	return 0;
 }
 
-static int ixgbevf_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused ixgbevf_suspend(struct device *dev_d)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct net_device *netdev = dev_get_drvdata(dev_d);
 	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
-#ifdef CONFIG_PM
-	int retval = 0;
-#endif
 
 	rtnl_lock();
 	netif_device_detach(netdev);
@@ -4314,37 +4311,16 @@ static int ixgbevf_suspend(struct pci_dev *pdev, pm_message_t state)
 	ixgbevf_clear_interrupt_scheme(adapter);
 	rtnl_unlock();
 
-#ifdef CONFIG_PM
-	retval = pci_save_state(pdev);
-	if (retval)
-		return retval;
-
-#endif
-	if (!test_and_set_bit(__IXGBEVF_DISABLED, &adapter->state))
-		pci_disable_device(pdev);
-
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int ixgbevf_resume(struct pci_dev *pdev)
+static int __maybe_unused ixgbevf_resume(struct device *dev_d)
 {
+	struct pci_dev *pdev = to_pci_dev(dev_d);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
 	u32 err;
 
-	pci_restore_state(pdev);
-	/* pci_restore_state clears dev->state_saved so call
-	 * pci_save_state to restore it.
-	 */
-	pci_save_state(pdev);
-
-	err = pci_enable_device_mem(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n");
-		return err;
-	}
-
 	adapter->hw.hw_addr = adapter->io_addr;
 	smp_mb__before_atomic();
 	clear_bit(__IXGBEVF_DISABLED, &adapter->state);
@@ -4365,10 +4341,9 @@ static int ixgbevf_resume(struct pci_dev *pdev)
 	return err;
 }
 
-#endif /* CONFIG_PM */
 static void ixgbevf_shutdown(struct pci_dev *pdev)
 {
-	ixgbevf_suspend(pdev, PMSG_SUSPEND);
+	ixgbevf_suspend(&pdev->dev);
 }
 
 static void ixgbevf_get_tx_ring_stats(struct rtnl_link_stats64 *stats,
@@ -4888,16 +4863,17 @@ static const struct pci_error_handlers ixgbevf_err_handler = {
 	.resume = ixgbevf_io_resume,
 };
 
+static SIMPLE_DEV_PM_OPS(ixgbevf_pm_ops, ixgbevf_suspend, ixgbevf_resume);
+
 static struct pci_driver ixgbevf_driver = {
 	.name		= ixgbevf_driver_name,
 	.id_table	= ixgbevf_pci_tbl,
 	.probe		= ixgbevf_probe,
 	.remove		= ixgbevf_remove,
-#ifdef CONFIG_PM
+
 	/* Power Management Hooks */
-	.suspend	= ixgbevf_suspend,
-	.resume		= ixgbevf_resume,
-#endif
+	.driver.pm	= &ixgbevf_pm_ops,
+
 	.shutdown	= ixgbevf_shutdown,
 	.err_handler	= &ixgbevf_err_handler
 };
-- 
2.26.2


  parent reply	other threads:[~2020-07-30 20:37 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-30 20:37 [net-next 00/12][pull request] 1GbE Intel Wired LAN Driver Updates 2020-07-30 Tony Nguyen
2020-07-30 20:37 ` [net-next 01/12] iavf: use generic power management Tony Nguyen
2020-07-30 20:37 ` [net-next 02/12] igbvf: " Tony Nguyen
2020-07-30 20:37 ` [net-next 03/12] ixgbe: " Tony Nguyen
2020-07-30 20:37 ` Tony Nguyen [this message]
2020-07-30 20:37 ` [net-next 05/12] e100: " Tony Nguyen
2020-07-30 20:37 ` [net-next 06/12] e1000: Remove unnecessary usages of memset Tony Nguyen
2020-07-30 20:37 ` [net-next 07/12] e1000e: " Tony Nguyen
2020-07-30 20:37 ` [net-next 08/12] igb: " Tony Nguyen
2020-07-30 20:37 ` [net-next 09/12] ixgbe: " Tony Nguyen
2020-07-30 20:37 ` [net-next 10/12] Documentation: intel: Replace HTTP links with HTTPS ones Tony Nguyen
2020-07-30 20:37 ` [net-next 11/12] ixgbe: use eth_zero_addr() to clear mac address Tony Nguyen
2020-07-30 20:37 ` [net-next 12/12] igb: " Tony Nguyen
2020-07-31 23:59 ` [net-next 00/12][pull request] 1GbE Intel Wired LAN Driver Updates 2020-07-30 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200730203720.3843018-5-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=andrewx.bowers@intel.com \
    --cc=davem@davemloft.net \
    --cc=jeffrey.t.kirsher@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=nhorman@redhat.com \
    --cc=sassmann@redhat.com \
    --cc=vaibhavgupta40@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).