netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Björn Töpel" <bjorn.topel@gmail.com>
To: ast@kernel.org, daniel@iogearbox.net, netdev@vger.kernel.org,
	bpf@vger.kernel.org
Cc: "Björn Töpel" <bjorn.topel@intel.com>,
	magnus.karlsson@intel.com, davem@davemloft.net, kuba@kernel.org,
	hawk@kernel.org, john.fastabend@gmail.com,
	intel-wired-lan@lists.osuosl.org
Subject: [PATCH bpf-next 4/6] i40e, xsk: finish napi loop if AF_XDP Rx queue is full
Date: Fri,  4 Sep 2020 15:53:29 +0200	[thread overview]
Message-ID: <20200904135332.60259-5-bjorn.topel@gmail.com> (raw)
In-Reply-To: <20200904135332.60259-1-bjorn.topel@gmail.com>

From: Björn Töpel <bjorn.topel@intel.com>

Make the AF_XDP zero-copy path aware that the reason for redirect
failure was due to full Rx queue. If so, exit the napi loop as soon as
possible (exit the softirq processing), so that the userspace AF_XDP
process can hopefully empty the Rx queue. This mainly helps the "one
core scenario", where the userland process and Rx softirq processing
is on the same core.

Note that the early exit can only be performed if the "need wakeup"
feature is enabled, because otherwise there is no notification
mechanism available from the kernel side.

This requires that the driver starts using the newly introduced
xdp_do_redirect_ext() and xsk_do_redirect_rx_full() functions.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_xsk.c | 23 +++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index 2a1153d8957b..3ac803ee8d51 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -142,13 +142,15 @@ int i40e_xsk_pool_setup(struct i40e_vsi *vsi, struct xsk_buff_pool *pool,
  * i40e_run_xdp_zc - Executes an XDP program on an xdp_buff
  * @rx_ring: Rx ring
  * @xdp: xdp_buff used as input to the XDP program
+ * @early_exit: true means that the napi loop should exit early
  *
  * Returns any of I40E_XDP_{PASS, CONSUMED, TX, REDIR}
  **/
-static int i40e_run_xdp_zc(struct i40e_ring *rx_ring, struct xdp_buff *xdp)
+static int i40e_run_xdp_zc(struct i40e_ring *rx_ring, struct xdp_buff *xdp, bool *early_exit)
 {
 	int err, result = I40E_XDP_PASS;
 	struct i40e_ring *xdp_ring;
+	enum bpf_map_type map_type;
 	struct bpf_prog *xdp_prog;
 	u32 act;
 
@@ -167,8 +169,13 @@ static int i40e_run_xdp_zc(struct i40e_ring *rx_ring, struct xdp_buff *xdp)
 		result = i40e_xmit_xdp_tx_ring(xdp, xdp_ring);
 		break;
 	case XDP_REDIRECT:
-		err = xdp_do_redirect(rx_ring->netdev, xdp, xdp_prog);
-		result = !err ? I40E_XDP_REDIR : I40E_XDP_CONSUMED;
+		err = xdp_do_redirect_ext(rx_ring->netdev, xdp, xdp_prog, &map_type);
+		if (err) {
+			*early_exit = xsk_do_redirect_rx_full(err, map_type);
+			result = I40E_XDP_CONSUMED;
+		} else {
+			result = I40E_XDP_REDIR;
+		}
 		break;
 	default:
 		bpf_warn_invalid_xdp_action(act);
@@ -268,8 +275,8 @@ int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget)
 {
 	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
 	u16 cleaned_count = I40E_DESC_UNUSED(rx_ring);
+	bool early_exit = false, failure = false;
 	unsigned int xdp_res, xdp_xmit = 0;
-	bool failure = false;
 	struct sk_buff *skb;
 
 	while (likely(total_rx_packets < (unsigned int)budget)) {
@@ -316,7 +323,7 @@ int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget)
 		(*bi)->data_end = (*bi)->data + size;
 		xsk_buff_dma_sync_for_cpu(*bi, rx_ring->xsk_pool);
 
-		xdp_res = i40e_run_xdp_zc(rx_ring, *bi);
+		xdp_res = i40e_run_xdp_zc(rx_ring, *bi, &early_exit);
 		if (xdp_res) {
 			if (xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR))
 				xdp_xmit |= xdp_res;
@@ -329,6 +336,8 @@ int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget)
 
 			cleaned_count++;
 			i40e_inc_ntc(rx_ring);
+			if (early_exit)
+				break;
 			continue;
 		}
 
@@ -363,12 +372,12 @@ int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget)
 	i40e_update_rx_stats(rx_ring, total_rx_bytes, total_rx_packets);
 
 	if (xsk_uses_need_wakeup(rx_ring->xsk_pool)) {
-		if (failure || rx_ring->next_to_clean == rx_ring->next_to_use)
+		if (early_exit || failure || rx_ring->next_to_clean == rx_ring->next_to_use)
 			xsk_set_rx_need_wakeup(rx_ring->xsk_pool);
 		else
 			xsk_clear_rx_need_wakeup(rx_ring->xsk_pool);
 
-		return (int)total_rx_packets;
+		return early_exit ? 0 : (int)total_rx_packets;
 	}
 	return failure ? budget : (int)total_rx_packets;
 }
-- 
2.25.1


  parent reply	other threads:[~2020-09-04 13:55 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-04 13:53 [PATCH bpf-next 0/6] xsk: exit NAPI loop when AF_XDP Rx ring is full Björn Töpel
2020-09-04 13:53 ` [PATCH bpf-next 1/6] xsk: improve xdp_do_redirect() error codes Björn Töpel
2020-09-04 13:53 ` [PATCH bpf-next 2/6] xdp: introduce xdp_do_redirect_ext() function Björn Töpel
2020-09-04 13:53 ` [PATCH bpf-next 3/6] xsk: introduce xsk_do_redirect_rx_full() helper Björn Töpel
2020-09-04 15:11   ` Jesper Dangaard Brouer
2020-09-04 15:39     ` Björn Töpel
2020-09-07 12:45       ` Jesper Dangaard Brouer
2020-09-04 13:53 ` Björn Töpel [this message]
2020-09-04 13:53 ` [PATCH bpf-next 5/6] ice, xsk: finish napi loop if AF_XDP Rx queue is full Björn Töpel
2020-09-04 13:53 ` [PATCH bpf-next 6/6] ixgbe, " Björn Töpel
2020-09-04 15:35   ` Jesper Dangaard Brouer
2020-09-04 15:54     ` Björn Töpel
2020-09-04 13:59 ` [PATCH bpf-next 0/6] xsk: exit NAPI loop when AF_XDP Rx ring " Björn Töpel
2020-09-08 10:32   ` Maxim Mikityanskiy
2020-09-08 11:37     ` Magnus Karlsson
2020-09-08 12:21       ` Björn Töpel
2020-09-09 15:37     ` Jesper Dangaard Brouer
2020-09-04 14:27 ` Jesper Dangaard Brouer
2020-09-04 14:32   ` Björn Töpel
2020-09-04 23:58     ` Jakub Kicinski
2020-09-07 13:37       ` Björn Töpel
2020-09-07 18:40         ` Jakub Kicinski
2020-09-08  6:58           ` Björn Töpel
2020-09-08 17:24             ` Jakub Kicinski
2020-09-08 18:28               ` Björn Töpel
2020-09-08 18:34                 ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200904135332.60259-5-bjorn.topel@gmail.com \
    --to=bjorn.topel@gmail.com \
    --cc=ast@kernel.org \
    --cc=bjorn.topel@intel.com \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=hawk@kernel.org \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=john.fastabend@gmail.com \
    --cc=kuba@kernel.org \
    --cc=magnus.karlsson@intel.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).