From: Ioana Ciornei <ioana.ciornei@nxp.com>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: shawnguo@kernel.org, robh+dt@kernel.org,
devicetree@vger.kernel.org, Ioana Ciornei <ioana.ciornei@nxp.com>
Subject: [PATCH net-next v2 09/10] arm64: dts: lx2160a: add PCS MDIO and PCS PHY nodes
Date: Sat, 3 Oct 2020 00:07:36 +0300 [thread overview]
Message-ID: <20201002210737.27645-10-ioana.ciornei@nxp.com> (raw)
In-Reply-To: <20201002210737.27645-1-ioana.ciornei@nxp.com>
Add PCS MDIO nodes for the internal MDIO buses on the LX2160A, along
with their internal PCS PHYs, which will be used when the DPMAC is
in TYPE_PHY mode.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
- none
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 252 ++++++++++++++++++
1 file changed, 252 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index d247e4228d60..a7f808a96dc4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1305,6 +1305,240 @@ emdio2: mdio@8b97000 {
status = "disabled";
};
+ pcs_mdio1: mdio@8c07000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c07000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs1: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio2: mdio@8c0b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0b000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs2: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio3: mdio@8c0f000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0f000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs3: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio4: mdio@8c13000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c13000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs4: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio5: mdio@8c17000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c17000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs5: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio6: mdio@8c1b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c1b000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs6: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio7: mdio@8c1f000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c1f000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs7: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio8: mdio@8c23000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c23000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs8: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio9: mdio@8c27000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c27000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs9: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio10: mdio@8c2b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c2b000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs10: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio11: mdio@8c2f000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c2f000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs11: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio12: mdio@8c33000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c33000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs12: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio13: mdio@8c37000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c37000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs13: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio14: mdio@8c3b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c3b000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs14: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio15: mdio@8c3f000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c3f000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs15: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio16: mdio@8c43000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c43000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs16: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio17: mdio@8c47000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c47000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs17: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ pcs_mdio18: mdio@8c4b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c4b000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs18: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>,
@@ -1333,91 +1567,109 @@ dpmacs {
dpmac1: dpmac@1 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x1>;
+ pcs-handle = <&pcs1>;
};
dpmac2: dpmac@2 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x2>;
+ pcs-handle = <&pcs2>;
};
dpmac3: dpmac@3 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x3>;
+ pcs-handle = <&pcs3>;
};
dpmac4: dpmac@4 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x4>;
+ pcs-handle = <&pcs4>;
};
dpmac5: dpmac@5 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x5>;
+ pcs-handle = <&pcs5>;
};
dpmac6: dpmac@6 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x6>;
+ pcs-handle = <&pcs6>;
};
dpmac7: dpmac@7 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x7>;
+ pcs-handle = <&pcs7>;
};
dpmac8: dpmac@8 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x8>;
+ pcs-handle = <&pcs8>;
};
dpmac9: dpmac@9 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x9>;
+ pcs-handle = <&pcs9>;
};
dpmac10: dpmac@a {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xa>;
+ pcs-handle = <&pcs10>;
};
dpmac11: dpmac@b {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xb>;
+ pcs-handle = <&pcs11>;
};
dpmac12: dpmac@c {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xc>;
+ pcs-handle = <&pcs12>;
};
dpmac13: dpmac@d {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xd>;
+ pcs-handle = <&pcs13>;
};
dpmac14: dpmac@e {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xe>;
+ pcs-handle = <&pcs14>;
};
dpmac15: dpmac@f {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xf>;
+ pcs-handle = <&pcs15>;
};
dpmac16: dpmac@10 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x10>;
+ pcs-handle = <&pcs16>;
};
dpmac17: dpmac@11 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x11>;
+ pcs-handle = <&pcs17>;
};
dpmac18: dpmac@12 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x12>;
+ pcs-handle = <&pcs18>;
};
};
};
--
2.28.0
next prev parent reply other threads:[~2020-10-02 21:08 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-02 21:07 [PATCH net-next v2 00/10] arm64: dts: layerscape: update MAC nodes with PHY information Ioana Ciornei
2020-10-02 21:07 ` [PATCH net-next v2 01/10] dt-bindings: net: add the dpaa2-mac DTS definition Ioana Ciornei
2020-10-06 20:56 ` Rob Herring
2020-10-07 10:51 ` Ioana Ciornei
2020-10-02 21:07 ` [PATCH net-next v2 02/10] arm64: dts: ls1088a: add external MDIO device nodes Ioana Ciornei
2020-10-02 21:07 ` [PATCH net-next v2 03/10] arm64: dts: ls1088ardb: add QSGMII PHY nodes Ioana Ciornei
2020-10-02 21:07 ` [PATCH net-next v2 04/10] arm64: dts: ls1088ardb: add necessary DTS nodes for DPMAC2 Ioana Ciornei
2020-10-02 21:07 ` [PATCH net-next v2 05/10] arm64: dts: ls208xa: add the external MDIO nodes Ioana Ciornei
2020-10-02 21:07 ` [PATCH net-next v2 06/10] arm64: dts: ls2088ardb: add PHY nodes for the CS4340 PHYs Ioana Ciornei
2020-10-02 21:07 ` [PATCH net-next v2 07/10] arm64: dts: ls2088ardb: add PHY nodes for the AQR405 PHYs Ioana Ciornei
2020-10-02 21:07 ` [PATCH net-next v2 08/10] arm64: dts: ls208xa: add PCS MDIO and PCS PHY nodes Ioana Ciornei
2020-10-02 21:07 ` Ioana Ciornei [this message]
2020-10-02 21:07 ` [PATCH net-next v2 10/10] arm64: dts: lx2160ardb: add nodes for the AQR107 PHYs Ioana Ciornei
2020-10-02 23:13 ` [PATCH net-next v2 00/10] arm64: dts: layerscape: update MAC nodes with PHY information David Miller
2020-10-03 4:35 ` Ioana Ciornei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201002210737.27645-10-ioana.ciornei@nxp.com \
--to=ioana.ciornei@nxp.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).