* [PATCH v2 0/2] convert flexcan to the yaml
@ 2020-10-16 7:33 Oleksij Rempel
2020-10-16 7:33 ` [PATCH v2 1/2] dt-bindings: can: add can-controller.yaml Oleksij Rempel
2020-10-16 7:33 ` [PATCH v2 2/2] dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml Oleksij Rempel
0 siblings, 2 replies; 6+ messages in thread
From: Oleksij Rempel @ 2020-10-16 7:33 UTC (permalink / raw)
To: mkl, Wolfgang Grandegger, David S. Miller, Jakub Kicinski, Rob Herring
Cc: Oleksij Rempel, kernel, linux-can, netdev, devicetree,
linux-kernel, Joakim Zhang
changes v2:
- add can-controller.yaml for common patterns
- use phandle-array instead of uint32-array
- Drop the outer 'items' in fsl,stop-mode
- use can@ instead of flexcan@
Oleksij Rempel (2):
dt-bindings: can: add can-controller.yaml
dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml
.../bindings/net/can/can-controller.yaml | 16 ++
.../bindings/net/can/fsl,flexcan.yaml | 137 ++++++++++++++++++
.../bindings/net/can/fsl-flexcan.txt | 57 --------
3 files changed, 153 insertions(+), 57 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/can/can-controller.yaml
create mode 100644 Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
delete mode 100644 Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
--
2.28.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/2] dt-bindings: can: add can-controller.yaml
2020-10-16 7:33 [PATCH v2 0/2] convert flexcan to the yaml Oleksij Rempel
@ 2020-10-16 7:33 ` Oleksij Rempel
2020-10-16 16:11 ` Rob Herring
2020-10-16 16:13 ` Rob Herring
2020-10-16 7:33 ` [PATCH v2 2/2] dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml Oleksij Rempel
1 sibling, 2 replies; 6+ messages in thread
From: Oleksij Rempel @ 2020-10-16 7:33 UTC (permalink / raw)
To: mkl, Wolfgang Grandegger, David S. Miller, Jakub Kicinski, Rob Herring
Cc: Oleksij Rempel, kernel, linux-can, netdev, devicetree,
linux-kernel, Joakim Zhang
For now we have only node name as common rule for all CAN controllers
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
.../bindings/net/can/can-controller.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/can/can-controller.yaml
diff --git a/Documentation/devicetree/bindings/net/can/can-controller.yaml b/Documentation/devicetree/bindings/net/can/can-controller.yaml
new file mode 100644
index 000000000000..185904454a69
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-controller.yaml
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN Controller Generic Binding
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+ $nodename:
+ pattern: "^can(@.*)?$"
+
+...
--
2.28.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml
2020-10-16 7:33 [PATCH v2 0/2] convert flexcan to the yaml Oleksij Rempel
2020-10-16 7:33 ` [PATCH v2 1/2] dt-bindings: can: add can-controller.yaml Oleksij Rempel
@ 2020-10-16 7:33 ` Oleksij Rempel
2020-10-19 21:25 ` Rob Herring
1 sibling, 1 reply; 6+ messages in thread
From: Oleksij Rempel @ 2020-10-16 7:33 UTC (permalink / raw)
To: mkl, Wolfgang Grandegger, David S. Miller, Jakub Kicinski, Rob Herring
Cc: Oleksij Rempel, kernel, linux-can, netdev, devicetree,
linux-kernel, Joakim Zhang
In order to automate the verification of DT nodes convert
fsl-flexcan.txt to fsl,flexcan.yaml
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
.../bindings/net/can/fsl,flexcan.yaml | 137 ++++++++++++++++++
.../bindings/net/can/fsl-flexcan.txt | 57 --------
2 files changed, 137 insertions(+), 57 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
delete mode 100644 Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
new file mode 100644
index 000000000000..c5c72bcd47c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx8qm-flexcan
+ - fsl,imx8mp-flexcan
+ - fsl,imx6q-flexcan
+ - fsl,imx53-flexcan
+ - fsl,imx35-flexcan
+ - fsl,imx28-flexcan
+ - fsl,imx25-flexcan
+ - fsl,p1010-flexcan
+ - fsl,vf610-flexcan
+ - fsl,ls1021ar2-flexcan
+ - fsl,lx2160ar1-flexcan
+ - items:
+ - enum:
+ - fsl,imx7d-flexcan
+ - fsl,imx6ul-flexcan
+ - fsl,imx6sx-flexcan
+ - const: fsl,imx6q-flexcan
+ - items:
+ - enum:
+ - fsl,ls1028ar1-flexcan
+ - const: fsl,lx2160ar1-flexcan
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: per
+
+ clock-frequency:
+ description: |
+ The oscillator frequency driving the flexcan device, filled in by the
+ boot loader. This property should only be used the used operating system
+ doesn't support the clocks and clock-names property.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ xceiver-supply:
+ description: Regulator that powers the CAN transceiver.
+ maxItems: 1
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ This means the registers of FlexCAN controller are big endian. This is
+ optional property.i.e. if this property is not present in device tree
+ node then controller is assumed to be little endian. If this property is
+ present then controller is assumed to be big endian.
+
+ fsl,stop-mode:
+ description: |
+ Register bits of stop mode control.
+
+ The format should be as follows:
+ <gpr req_gpr req_bit>
+ gpr is the phandle to general purpose register node.
+ req_gpr is the gpr register offset of CAN stop request.
+ req_bit is the bit offset of CAN stop request.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - description: The 'gpr' is the phandle to general purpose register node.
+ - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+ maximum: 0xff
+ - description: The 'req_bit' is the bit offset of CAN stop request.
+ maximum: 0x1f
+
+ fsl,clk-source:
+ description: |
+ Select the clock source to the CAN Protocol Engine (PE). It's SoC
+ implementation dependent. Refer to RM for detailed definition. If this
+ property is not set in device tree node then driver selects clock source 1
+ by default.
+ 0: clock source 0 (oscillator clock)
+ 1: clock source 1 (peripheral clock)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 1
+ minimum: 0
+ maximum: 1
+
+ wakeup-source:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable CAN remote wakeup.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ can@1c000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1c000 0x1000>;
+ interrupts = <48 0x2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <200000000>;
+ fsl,clk-source = <0>;
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ can@2090000 {
+ compatible = "fsl,imx6q-flexcan";
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 1>, <&clks 2>;
+ clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x34 28>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
deleted file mode 100644
index e10b6eb955e1..000000000000
--- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
-
-Required properties:
-
-- compatible : Should be "fsl,<processor>-flexcan"
-
- where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
- vf610, ls1021ar2, lx2160ar1, ls1028ar1.
-
- The ls1028ar1 must be followed by lx2160ar1, e.g.
- - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
-
- An implementation should also claim any of the following compatibles
- that it is fully backwards compatible with:
-
- - fsl,p1010-flexcan
-
-- reg : Offset and length of the register set for this device
-- interrupts : Interrupt tuple for this device
-
-Optional properties:
-
-- clock-frequency : The oscillator frequency driving the flexcan device
-
-- xceiver-supply: Regulator that powers the CAN transceiver
-
-- big-endian: This means the registers of FlexCAN controller are big endian.
- This is optional property.i.e. if this property is not present in
- device tree node then controller is assumed to be little endian.
- if this property is present then controller is assumed to be big
- endian.
-
-- fsl,stop-mode: register bits of stop mode control, the format is
- <&gpr req_gpr req_bit>.
- gpr is the phandle to general purpose register node.
- req_gpr is the gpr register offset of CAN stop request.
- req_bit is the bit offset of CAN stop request.
-
-- fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE).
- It's SoC Implementation dependent. Refer to RM for detailed
- definition. If this property is not set in device tree node
- then driver selects clock source 1 by default.
- 0: clock source 0 (oscillator clock)
- 1: clock source 1 (peripheral clock)
-
-- wakeup-source: enable CAN remote wakeup
-
-Example:
-
- can@1c000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1c000 0x1000>;
- interrupts = <48 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <200000000>; // filled in by bootloader
- fsl,clk-source = <0>; // select clock source 0 for PE
- };
--
2.28.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: can: add can-controller.yaml
2020-10-16 7:33 ` [PATCH v2 1/2] dt-bindings: can: add can-controller.yaml Oleksij Rempel
@ 2020-10-16 16:11 ` Rob Herring
2020-10-16 16:13 ` Rob Herring
1 sibling, 0 replies; 6+ messages in thread
From: Rob Herring @ 2020-10-16 16:11 UTC (permalink / raw)
To: Oleksij Rempel
Cc: Rob Herring, linux-kernel, mkl, netdev, kernel, linux-can,
Jakub Kicinski, devicetree, Wolfgang Grandegger, Joakim Zhang,
David S. Miller
On Fri, 16 Oct 2020 09:33:14 +0200, Oleksij Rempel wrote:
> For now we have only node name as common rule for all CAN controllers
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../bindings/net/can/can-controller.yaml | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/can/can-controller.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
./Documentation/devicetree/bindings/net/can/can-controller.yaml: $id: relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/net/can/can-controller.yaml#
See https://patchwork.ozlabs.org/patch/1383115
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: can: add can-controller.yaml
2020-10-16 7:33 ` [PATCH v2 1/2] dt-bindings: can: add can-controller.yaml Oleksij Rempel
2020-10-16 16:11 ` Rob Herring
@ 2020-10-16 16:13 ` Rob Herring
1 sibling, 0 replies; 6+ messages in thread
From: Rob Herring @ 2020-10-16 16:13 UTC (permalink / raw)
To: Oleksij Rempel
Cc: mkl, Wolfgang Grandegger, David S. Miller, Jakub Kicinski,
kernel, linux-can, netdev, devicetree, linux-kernel,
Joakim Zhang
On Fri, Oct 16, 2020 at 09:33:14AM +0200, Oleksij Rempel wrote:
> For now we have only node name as common rule for all CAN controllers
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../bindings/net/can/can-controller.yaml | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/can/can-controller.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/can/can-controller.yaml b/Documentation/devicetree/bindings/net/can/can-controller.yaml
> new file mode 100644
> index 000000000000..185904454a69
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/can-controller.yaml
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: GPL-2.0
Dual license new bindings please.
(GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/can-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: CAN Controller Generic Binding
> +
> +maintainers:
> + - Marc Kleine-Budde <mkl@pengutronix.de>
> +
> +properties:
> + $nodename:
> + pattern: "^can(@.*)?$"
additionalProperties: true
(This is the default, but it's going to be required after rc1 so the
meta-schema can check for it and I can stop telling people to add it (in
the false case)).
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml
2020-10-16 7:33 ` [PATCH v2 2/2] dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml Oleksij Rempel
@ 2020-10-19 21:25 ` Rob Herring
0 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2020-10-19 21:25 UTC (permalink / raw)
To: Oleksij Rempel
Cc: mkl, Wolfgang Grandegger, David S. Miller, Jakub Kicinski,
kernel, linux-can, netdev, devicetree, linux-kernel,
Joakim Zhang
On Fri, Oct 16, 2020 at 09:33:15AM +0200, Oleksij Rempel wrote:
> In order to automate the verification of DT nodes convert
> fsl-flexcan.txt to fsl,flexcan.yaml
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../bindings/net/can/fsl,flexcan.yaml | 137 ++++++++++++++++++
> .../bindings/net/can/fsl-flexcan.txt | 57 --------
> 2 files changed, 137 insertions(+), 57 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> delete mode 100644 Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>
> diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> new file mode 100644
> index 000000000000..c5c72bcd47c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> @@ -0,0 +1,137 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title:
> + Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
> +
> +maintainers:
> + - Marc Kleine-Budde <mkl@pengutronix.de>
> +
> +allOf:
> + - $ref: can-controller.yaml#
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - fsl,imx8qm-flexcan
> + - fsl,imx8mp-flexcan
> + - fsl,imx6q-flexcan
> + - fsl,imx53-flexcan
> + - fsl,imx35-flexcan
> + - fsl,imx28-flexcan
> + - fsl,imx25-flexcan
> + - fsl,p1010-flexcan
> + - fsl,vf610-flexcan
> + - fsl,ls1021ar2-flexcan
> + - fsl,lx2160ar1-flexcan
> + - items:
> + - enum:
> + - fsl,imx7d-flexcan
> + - fsl,imx6ul-flexcan
> + - fsl,imx6sx-flexcan
> + - const: fsl,imx6q-flexcan
> + - items:
> + - enum:
> + - fsl,ls1028ar1-flexcan
> + - const: fsl,lx2160ar1-flexcan
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 2
> +
> + clock-names:
> + items:
> + - const: ipg
> + - const: per
> +
> + clock-frequency:
> + description: |
> + The oscillator frequency driving the flexcan device, filled in by the
> + boot loader. This property should only be used the used operating system
> + doesn't support the clocks and clock-names property.
> + $ref: /schemas/types.yaml#/definitions/uint32
Standard prop, already has a type.
> +
> + xceiver-supply:
> + description: Regulator that powers the CAN transceiver.
> + maxItems: 1
*-supply is always a single item. Drop maxItems.
> +
> + big-endian:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: |
> + This means the registers of FlexCAN controller are big endian. This is
> + optional property.i.e. if this property is not present in device tree
> + node then controller is assumed to be little endian. If this property is
> + present then controller is assumed to be big endian.
> +
> + fsl,stop-mode:
> + description: |
> + Register bits of stop mode control.
> +
> + The format should be as follows:
> + <gpr req_gpr req_bit>
> + gpr is the phandle to general purpose register node.
> + req_gpr is the gpr register offset of CAN stop request.
> + req_bit is the bit offset of CAN stop request.
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - description: The 'gpr' is the phandle to general purpose register node.
> + - description: The 'req_gpr' is the gpr register offset of CAN stop request.
> + maximum: 0xff
> + - description: The 'req_bit' is the bit offset of CAN stop request.
> + maximum: 0x1f
> +
> + fsl,clk-source:
> + description: |
> + Select the clock source to the CAN Protocol Engine (PE). It's SoC
> + implementation dependent. Refer to RM for detailed definition. If this
> + property is not set in device tree node then driver selects clock source 1
> + by default.
> + 0: clock source 0 (oscillator clock)
> + 1: clock source 1 (peripheral clock)
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 1
> + minimum: 0
> + maximum: 1
> +
> + wakeup-source:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Enable CAN remote wakeup.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + can@1c000 {
> + compatible = "fsl,p1010-flexcan";
> + reg = <0x1c000 0x1000>;
> + interrupts = <48 0x2>;
> + interrupt-parent = <&mpic>;
> + clock-frequency = <200000000>;
> + fsl,clk-source = <0>;
> + };
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + can@2090000 {
> + compatible = "fsl,imx6q-flexcan";
> + reg = <0x02090000 0x4000>;
> + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 1>, <&clks 2>;
> + clock-names = "ipg", "per";
> + fsl,stop-mode = <&gpr 0x34 28>;
> + };
> diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> deleted file mode 100644
> index e10b6eb955e1..000000000000
> --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
> -
> -Required properties:
> -
> -- compatible : Should be "fsl,<processor>-flexcan"
> -
> - where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
> - vf610, ls1021ar2, lx2160ar1, ls1028ar1.
> -
> - The ls1028ar1 must be followed by lx2160ar1, e.g.
> - - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
> -
> - An implementation should also claim any of the following compatibles
> - that it is fully backwards compatible with:
> -
> - - fsl,p1010-flexcan
> -
> -- reg : Offset and length of the register set for this device
> -- interrupts : Interrupt tuple for this device
> -
> -Optional properties:
> -
> -- clock-frequency : The oscillator frequency driving the flexcan device
> -
> -- xceiver-supply: Regulator that powers the CAN transceiver
> -
> -- big-endian: This means the registers of FlexCAN controller are big endian.
> - This is optional property.i.e. if this property is not present in
> - device tree node then controller is assumed to be little endian.
> - if this property is present then controller is assumed to be big
> - endian.
> -
> -- fsl,stop-mode: register bits of stop mode control, the format is
> - <&gpr req_gpr req_bit>.
> - gpr is the phandle to general purpose register node.
> - req_gpr is the gpr register offset of CAN stop request.
> - req_bit is the bit offset of CAN stop request.
> -
> -- fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE).
> - It's SoC Implementation dependent. Refer to RM for detailed
> - definition. If this property is not set in device tree node
> - then driver selects clock source 1 by default.
> - 0: clock source 0 (oscillator clock)
> - 1: clock source 1 (peripheral clock)
> -
> -- wakeup-source: enable CAN remote wakeup
> -
> -Example:
> -
> - can@1c000 {
> - compatible = "fsl,p1010-flexcan";
> - reg = <0x1c000 0x1000>;
> - interrupts = <48 0x2>;
> - interrupt-parent = <&mpic>;
> - clock-frequency = <200000000>; // filled in by bootloader
> - fsl,clk-source = <0>; // select clock source 0 for PE
> - };
> --
> 2.28.0
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-10-19 21:26 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-16 7:33 [PATCH v2 0/2] convert flexcan to the yaml Oleksij Rempel
2020-10-16 7:33 ` [PATCH v2 1/2] dt-bindings: can: add can-controller.yaml Oleksij Rempel
2020-10-16 16:11 ` Rob Herring
2020-10-16 16:13 ` Rob Herring
2020-10-16 7:33 ` [PATCH v2 2/2] dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml Oleksij Rempel
2020-10-19 21:25 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).